Toggle Sidebar
News Feed

Currently filtering items tagged with #Vorshlag


  • Post is under moderation
    FORCED INDUCTION FRENZY!

    BOOST MODE #Stunning 610 whp turbocharged E36 M3 turns up the heat. Cars are meant to be driven and it was that realisation that took this E36 M3 from mild to wild.

    JUNKIE BOOST Words: Elizabeth de Latour Photos: Patrick Lauder

    Dean Yarza never intended for his E36 M3 to turn out this way. He’d always wanted one, that much he did know, and finally owning one was the fulfilment of a high school dream, even though it followed a modified E46 M3 ZCP. You might have thought that his former car would have been the keeper, the big one, because it was an E46 M3 after all, but life’s not always that straightforward. That Dean has been dreaming about owning an E36 M3 since his high school days is no surprise; this is a man who, briefly, owned a hand-me-down E21 323i as his first car and who admits to having been interested in BMWs since first being able to drive.

    The Carbon black 2005 E46 M3 that he purchased in 2006 was where his BMW journey began proper, Dean having experimented with numerous vehicles prior to that. “I’ve basically modified everything I’ve owned since high school, giving in to the typical sickness the everyday car nut suffers from and I do not discriminate when it comes to the hobby,” he grins. This explains why his car ownership history includes an Acura Integra on nitrous, a couple of Saleen Mustangs and a Saleen Cobra, all of which ended up running over 500whp courtesy of aftermarket superchargers, a Ford F150 truck and even a couple of Yamaha R6 bikes. It’s a varied, colourful automotive past in which Dean has sampled all manner of modified machinery and that most certainly did not stop when the M3 entered his life. “I modified it with all the NA boltons including long tube exhaust manifolds, performance pulleys, air filter, 4.10 gearing and a performance tune. The exterior was also fitted with the full line of Vorsteiner VSL pieces – front bumper, rear deck lid and diffuser. 19” BBS LM rims and a Brembo GT brake kit were also installed,” completing what sounds like a thoroughly sexy and sorted M3. So why the switch from 46 to 36?

    “After parting with my E46 M3, I yearned for another M and, more importantly, something to give me purpose, spending hours on forums researching and purchasing parts. At the time, it was the perfect platform to satisfy the need to handle, perform, and modify while being fairly painless to attain,” explains Dean though, in truth, the E36 did almost put the brakes on his modding addiction but, as we all know, you just can’t fight it…

    “As many E36 owners know, it’s a bit tough to find them in a non-abused state in today’s market,” he says, and he’s not wrong. “After failing to find one to my liking for a few months, I put out a wanted add online and, amazingly, received a response for what was almost exactly what I was looking for. Prior to my search, I’d curbed my expectations, accepting the fact that these cars are close to 20 years old and I wasn’t going to find a gem. My initial want was just for a clean-titled, decent paint/interior M3 knowing that 90-110k miles would be the norm. What appeared in response to my add was a single-owner, excellent condition M3 with only around 33,000 miles, completely stock, still with the break-in instructions applied to the windscreen, as well as the original window sticker still in the glove compartment. It was far too pristine but in no way would be passed up.” That sounds like a once in a lifetime find to us and it would have been very silly of Dean to turn down the opportunity to own such an immaculate car, but it was the car’s virgin state and lack of miles that presented Dean with a bit of a quandary. “Prior to finding one with such low mileage, my plans were night and day from what the car is now,” he says.

    “I initially only wanted something I could drive every day and everywhere, occasionally having weekend duty for spirited driving in the hills. To do this, I planned nothing more than a capable coilover set and a nice wheel and tyre combo. In a way, I just wanted a cool car I could really beat on and not care too much about,” but obviously that couldn’t happen now and a different approach to the whole ownership and modding outlook had to be taken. In fact, as we mentioned earlier, Dean wasn’t even sure whether modifying was the right thing to do. “As I did not plan to find such a low mileage/collector type of car, it was a tough decision to modify,” he says, before adding “ but eventually the bug got the better of me,” and so things began to happen.

    Suspension and wheels came first, as per his original plans; “Knowing that I did not participate in high performance driving/autocross events, I was looking for something simple in terms of handling and comfort,” Dean explains. “The Bilstein PSS9 kit fits this bill as it is a basic coilover setup which is not too aggressive while offering, in my opinion, one of the most comfortable rides for a coilover while still improving handling capability. Along with this, I’ve also chosen a set of Dinan front and rear strut braces and a BMW X-brace, which is found as standard on the M3 LTW.” Handling benefits aside, the adjustable ride height of the PSS9s means that Dean has been able to dial-in his perfect stance and the drop he’s gone for is serious; those front arches are a hair’s breadth above the rubber while at the rear he’s got the tyres tucked just past the edges of the lips and the result is spectacular.

    As far as his wheel choice is concerned, for many BBS fans it’s the holy grail for both modern and classic BMWs alike and a wheel he has a lot of love for. “It was only fitting that for a classic M3 I’d want to stick with classic wheels. My favourite wheels for the BMW have always been BBS LMs, I feel you can put these on any car and drastically improve the look, especially European applications. I owned a set on my E46 M3 and had nothing but positive experiences with them in regards to looks, performance and strength. You get what you pay for with wheels and in my eyes, they are half of the car. I did consider other wheels but this was very short-lived, I was set on LMs for my build. It turned out to be very difficult to find a set, though, as 18s were much harder to come by than the typical 19” and above. Luck still was not on my side which forced me to become a little more creative and experiment with a set taken from a Honda S2000. This presented a bit of a challenge as the offset and PCD were different but after some research I found a local wheel customisation shop which was able to adjust bolt pattern as well as offset to get them to fit correctly.”

    It’s safe to say it was worth the effort as the LMs look so good on the E36, as they do on just about any BM, and here they’re finished off with a BBS stud conversion kit and those iconic red centre caps.

    That’s all well and good, but the real reason we’re here is for what’s under the bonnet and it took a bit of a personal revelation for Dean to make the huge leap from mild NA mods to off-the-scale, full-on forced induction fury. “I found deals on the basic bolt-ons such as a Dinan CAI and Dinan exhaust and the car stayed in this state for quite sometime as I did not want to overly modify it, risking an adverse affect to the car’s value considering its mileage.

    Eventually, realising that cars are meant to be driven and I would not be satisfied until I had it the way I wanted, I decided to open the floodgates and enjoy it while I have it,” he says and this is definitely the right philosophy. “After the basic bolt-ons, the turbo research began brewing and opened up a whole new world. For one whole year, I began researching and stockpiling the turbo components needed for my build, beginning with the actual turbo, a Garrett GT35R and SPA T3 manifold, fuel components, Cut-Ring head gasket, and Zeitronix data logging gauges and equipment, the essentials I needed to get started. After a year acquiring these components – and then some – it was all installed in one shop sitting, taking a few months to complete.

    “The car was taken to David Tran at 4B Auto in Santa Clara, CA; David is known to have built some of the fastest turbo E36s around with upwards of 1000hp, so I knew I was in good hands with this build,” says Dean. “The motor was disassembled, having to remove the head for resurfacing, while upgrading the head studs with an ARP2000 10mm stud kit. From there, the stock head gasket was also upgraded to an 87mm Cut- Ring head gasket. When the head returned from resurfacing, the SPA T3 turbo manifold was mounted while the Vanos was also rebuilt and the head was finally ready to install. Once the engine was reassembled, various changes were made including upgraded fuel components such as a Rally Road high-flow billet fuel rail, 115lb high impedance injectors, and an Aeromotive adjustable fuel pressure regulator. The intake manifold was also swapped for an M50 model for better flow. Impressive to say, the engine was able to fire up at first attempt with no hiccups. David’s engine work was one of the smoother processes throughout.”

    High praise indeed and there’s nothing better than a true turn-key conversion that just works, especially after such a huge amount of work. A quick glance at the engine spec is all you need to know that this is a serious performance project but all that research and time spent on it was absolutely worth it.

    It enabled Dean to pick the best components and the ones best suited to helping him achieve his end goal, and all that work has yielded some astonishing numbers. Peak power now stands at 610whp, which is around 700hp at the crank however you like to do your calculations, and is backed up by 571lb ft of wheel torque, both serious numbers and definitely plenty to be getting on with.

    Obviously, as well as the suspension upgrades that were carried out before Dean let loose, the chassis and transmission have received further modifications to be able to cope with that huge increase in output over stock. First of all, there’s a big brake kit in the shape of Brembo’s GT kit and before we even get onto the specs those red calipers are just killer and work perfectly alongside the red detailing on the LMs and against the white bodywork.

    They do, of course, deliver on the braking front too, but then you’d expect nothing less with four-pot calipers and 355mm discs stationed up front and only a fractionally smaller pairing located at the rear. As far as the transmission is concerned, Dean has bolstered the ZF five-speed manual gearbox with a selection of UUC components, including a twin-disc flywheel/clutch combo, steel clutch line, and short shifter, all of which combine to allow it to far better cope with all that power and torque.


    What we really love about Dean’s E36 M3, and we love everything about it, is the fact that, really, there’s no way for you to know just how much power is lurking beneath that pristine white bodywork. Obviously it’s not a stock car, but he’s kept all of the styling within the spectrum of normality and as a result there’s little to suggest that this might be nothing more than a lightly breathed-on older M3. “My intention for the exterior was something not too aggressive; basically maintain the stock look and body panels yet add some touches to give a slightly more aggressive look,” and we’d say it’s mission accomplished. Euro lights have been sourced from ECS Tuning and fitted all-round, along with a set of ZKW HID projector headlights; a Max Velocity RS front lip sits beneath the front bumper for a hint of extra aggression, while at the rear there’s a Mateo Motorsports diffuser and a sexy UUC adjustable carbon spoiler. The interior has been kept largely standard, bar the addition of numerous gauges and a few minor tweaks that enhance what was already there. The Vader front seats, finished in Mulberry-colour leather, have been left alone and Dean has added some M3-logo’d mats, a customwrapped Euro three-spoke steering wheel and MT Shift Boots alcantara gear lever and handbrake gaiters to complete the look.

    Four years of ownership are what it’s taken to bring the E36 to this level and while it has clearly been worth the effort, there has been a lot of it involved in getting the car to where it is. As Dean himself says “I currently have no plans for a next car, other than possibly a modern 5 Series daily driver. At this point, I may have exhausted all energy to even think about starting yet another project,” and that’s something we can all relate to it, that feeling of near-exhaustion when you’ve “finished” a project, or at least got it to the next stage of its evolution. Of course, this M3 has not finished evolving, not in the slightest. “A contingency plan is actually already in place,” says Dean.

    “Simultaneously with the turbo install, I have also been working on a fully-built spare motor capable of 1000hp, which was also completed about the time the turbo install was competed. Also on hand is a full drivetrain upgrade, which includes a Euro six-speed 420 Getrag transmission, DSS six-bolt 1000hp driveshaft, upgraded rear axles, and a large case 210mm limited slip differential from a 1990 BMW 750iL.

    The only future decision to be made now is which turbo and manifold configuration to fit. With the upgraded turbo and motor, the car should be able to generate and handle even more power with ease. If any mishaps were to occur, these components are ready, that is if impatience does not get to me first and I proactively go ahead with the swap.”

    That’s a very sensible approach to take with a completely unhinged project, and we whole-heartedly approve. Dean’s E36 is pure performance: there’s no frivolity here, it’s full-on, focussed and furious with it, and we love it.

    “After the basic bolt-ons, the turbo research began brewing and opened up a whole new world. For one whole year, I began researching and stockpiling the turbo components needed for my build”

    TECHNICAL DATA FILE #BMW / Turbo #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #BMW-M3-Turbo / #BMW-M3-Turbo-E36 / #Garrett / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-E36 / #BMW-3-Series-M3-E36 / BMW

    ENGINE 3.2-litre straight-six #S52B32 / #S52 / #BMW-S52 , Cut-Ring 87mm head gasket (stock compression), #ARP2000 head studs, #Garrett-GT3528R dual ball-bearing turbo, #SPA-T3-turbo manifold, 610x305x76mm front-mount intercooler, #Tial 50mm blow-off valve, Tial 44mm MVR wastegate, M50 intake manifold, #Mishimoto coolant overflow, Mishimoto performance aluminium radiator, #Steward high-performance water pump, RK Tunes E85 turbo tune and MAF, 115lb high impedance injectors, Rally Road high-flow billet fuel rail, Aeromotive adjustable fuel pressure regulator, Vibrant intake filter, custom fabricated 3” stainless steel down pipe and exhaust system, #Vibrant turbo muffler, #Radium-Engineering oil catch can, #Radium-Engineering 12 micron fuel filter, Racetronix Fuel Pump wiring harness, Walbro 485lph fuel pump

    POWER AND TORQUE 610whp, 571 lb ft wtq

    TRANSMISSION Five-speed #ZF manual gearbox, UUC twin-disc flywheel/clutch kit, #UUC steel clutch line, Rally Road clutch pivot pin, #UUC-EVO3 short shifter with double shear selector rod, #Vorshlag polyurethane transmission mounts

    CHASSIS 8.5x18” (front) and 9.5x18” (rear) #BBS-LM wheels with 235/40 (front) Hankook Ventus V12 Evo2 and 255/35 (rear) Toyo Proxes R888 tyres, BBS red centre caps, #BBS stud kit, #Bilstein-PSS9 coilovers, Vorshlag polyurethane engine mounts, #Dinan front and rear strut braces, #BMW OEM X-brace, #Brembo GT BBK with 355x32mm two-piece discs and four-piston calipers (front) and 328x28mm two-piece discs and two-piston calipers (rear), #Hawk HPS brake pads (front and rear)

    EXTERIOR Alpine white, ZKW HID projector headlights, ECS tuning European front clear corners, side markers and rear lights, Max Velocity RS front lip, Mateo Motorsports rear diffuser, UUC three-way adjustable carbon fibre spoiler

    INTERIOR Custom wrapped European three-spoke steering wheel, MT shift boots Alcantara gear lever and handbrake gaiters, Rally Road steering column dual gauge pod, LeatherZ centre gauge pod, Turbosmart Eboost2 boost controller/gauge, #Zeitronix ZR-2 wideband AFR, ECA-2 ethanol content analyser, ZR-2 boost and ZR-2 fuel pressure gauges

    Hard-pipe-mounted Tial blow-off vlave.
    Turbo is hidden away, only the air filter is visible in the engine bay.
    Interior home to various gauges plus Alcantara gear and hand brake gaiters.
    Gorgeous 18” BBS LMs and #Brembo-BBK .
    Up front, HID projector headlights with angel eyes.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    KING OF THE MOUNTAINS Turbo, wide-arch E30 Cab

    Logically, this E30 should have been scrapped long ago. But when you’re building a big-power toy for motorsport thrills and early-morning mountain runs, logic doesn’t always factor very highly… Words: Daniel Bevis. Photos: Scott Sturdy.

    The Blue Ridge Parkway, running through North Carolina and into Virginia represents one of America’s great fusions of nature and technology. Scenic roads were something that American developers did uncannily well in the early half of the 20th century, and this particular one – a ribbon of Tarmac winding through gorgeous vistas of the Appalachian Mountains – is where Matthew Koppi’s love for BMWs was born. He’s the man behind this Olive green E30, and his passion for the marque stretches back decades. “I first fell in love with the BMW brand in my childhood,” he reminisces. “I live in the scenic mountains of Western North Carolina, and I used to see BMWs all over the twisty Blue Ridge Parkway in the ’80s. As a carobsessed kid the BMW was something that seemed like perfection; so graceful and nimble with timeless design.


    “I bought my first #BMW in 1999,” he continues, “while stationed in Vicenza, Italy. It was a 1983 323i with Alpina cams and other goodies that I didn’t fully appreciate at the time. I bought it because of my childhood infatuation – plus the price was right for a young army private! It was the first car I owned with fully independent suspension and four-wheel disc brakes, and also the first that I could drive over 100mph for extended periods of time without worrying about it exploding. I’ve been a devotee ever since!”

    All of this rather explains Matthew’s latest career move, setting up North Fork Autoworks in Barnardsville, North Carolina. Having turned wrenches for much of his adult career, this seemed like a logical move, although he’s keen to point out that throughout this E30’s build he was a full-time student, working on a bachelor’s degree in Environmental Science.

    “All of the work on the car, from fabrication to paint, both in the engine bay and outside, was done by me,” he proudly explains. “The only thing I didn’t do completely on my own was the machine work, but I was there for every step of the process and even ran some of the machines!

    Basically, I was either directly responsible for every aspect of the car or I was intimately involved.” And with that forthright mission statement dealt with, we should probably rewind and take a peek at where this all started…

    Back in 2010, having returned to school and requiring a sensible-ish runabout Matthew was driving an old Suzuki Sidekick (that’s a Vitara to you and me) and questioning his choices somewhat. It was boring. And life’s too short for boring cars. So the idea of a fixer-upper E30 began to percolate, and you know what happens when the spark of inspiration’s arrived. It’s pretty much a done deal.

    This cabriolet appeared as a shabby little ragamuffin on Craigslist, but crucially the price was low. “The ad stated that the car ran when parked, but now wouldn’t start,” Matthew recalls. “It also disclosed that the interior and top were trashed. I arrived to find a car parked in tall grass behind a tiny house way back in the mountains, in the middle of nowhere! The previous owners were very nice and were at their wits’ end with the car. And they were painfully honest about it all. Truly the thing should have been parted out or crushed, but I was in love.

    It had bad rear wheel bearings, one front hub bearing was shot, bald tyres, ruined leather interior that had hardened and cracked beyond repair or comfort, the paint on every panel was faded and peeling, the battery tray was rusted through, it had an automatic transmission, wrong front wings, cracked aluminium bumpers, and the top was so far gone that there was water pooled in the floor despite the car being under two tarps. True to the ad, the engine would turn over but wouldn’t start, so the condition of the drivetrain was unknown.” Quite a catch, right? So as you can imagine, Matthew snapped it up and lovingly caressed it homeward, all the time reminiscing about those swooping mountain heroes on the Blue Ridge Parkway.

    “First and foremost, I wanted to get it running and replace the top,” he explains. “It needed to be good enough to comfortably drive my young daughters around in as I continued to fix it up, and I originally planned to follow my old formula of decent wheels and lowered suspension… but that was before my first autocross event!” That’s right. The goalposts just shifted. First, though, is the matter of a knackered E30 which needs pretty much everything fixed…

    Job one was to get the old M20 ticking over sweetly and mated to a manual gearbox, something that Matthew did right away before fiddling with chips and fuelling and so on, and this setup lasted a couple of seasons of autocross. But power corrupts, and he was craving more, so he started pooling resources for an M5x swap… until the idea of a boosted M30 caught his eye, and from then on there was only one way forward.

    Now, M30s (that is, straight-six motors as found in the likes of the E28 5 Series, E24 6 Series and so on) have been swapped into E30s many times before, so there was a wealth of information available. What Matthew had to do was figure how to tailor the swap to his own unique requirements. After much consideration and research, he opted for an M30B34 block – for strength – with an M30B35 head and #Getrag 260/6 transmission. That was the base spec. Then the fun could begin.

    The block was bored out to take 94mm Wiseco pistons, increasing displacement to 3.6-litres, while the crankshaft was balanced and the head received all sorts of handcrafted custom work. A Rapid Spool Industries exhaust manifold allowed the fitment of that all-important turbo (originally a Holset HX40, now upgraded to a Borg Warner EFR 7670), and naturally the fuelling and management were beefed up to suit. A trick exhaust system soon followed, as did a Volvo intercooler, some more appropriate cams, and upgrades to the valvetrain. Piece by piece, Matthew’s masterpiece was falling into place. On a conservative tune and at just 13.8psi, the M30 was making 450hp – which certainly helped with those corruptive power cravings.

    So, the engine box was firmly ticked. Still a lot of other things to sort though, weren’t there? “I tried several different combinations of springs and dampers,” says Matthew.

    “Ultimately I used autocross and mountain roads to dial in my suspension; my current configuration consists of Bilstein Sport struts and shocks, H&R J-spec front springs, GE adjustable rear perches and springs, reinforced rear shock mounts, Vorshlag front camber plates, drop hats, and Treehouse Racing control arm bushings. I swapped in an E36 steering rack and, of course, replaced both front hub assemblies. For the rear subframe I installed the AKG 75D 12mm offset frame, diff mount bushings and trailing arm bushings.”

    Okay, so the thing works well now. But it needs to look good. What next? Aha, the body! “When I began fixing the bodywork issues, I ended up with five different colours on the car,” he laughs. “I couldn’t afford a traditional paint job due to being a student, and I still had a huge list of maintenance and repairs to tackle, so the idea of painting it myself in flat military green was very appealing. It had an aggressive feel to it, and allowed me to easily change and add body panels as needed. It also made all the trim work that much easier, because subdued black and flat green are perfectly paired!

    “The entire attitude of the car followed the suspension setup and colour choice, although modifications such as the Kamotors arch flares were a product of necessity – especially with 8”-wide wheels and 245-section tyres on the rear – that just happened to enhance the overall demeanour of the car.” That Foha three-piece spoiler was certainly a lucky find too, it complements the hammered-together-by- The-A-Team vibe perfectly.

    Of course, it’s no good having a car that goes like a train, handles like a sticky panther, and looks like a militaristic warlord if you don’t actually have anywhere to sit.

    That rain-saturated tan leather trim had to go. “The interior of the car was in a horrible state of decay and disrepair,” Matthew grimaces. “When I replaced the battery tray, I took the opportunity to swap the dash with a crack-free one; I then followed that with converting the interior to black since I wasn’t a fan of the tan anyway! Through the forums I made contact with Kevin Chinn of Creative Options to discuss an upholstery kit, and after several conversations I decided on microsuede centres on the seats with vinyl bolsters for ease of maintenance. The seams were done with factory-style French stitching in light Olive green.

    Before the seats went back in I dyed the carpet black, and so the weekend ended with me having stained and sore fingers but amazing upholstery!” When we ask Matthew what his favourite result of all this homegrown dabbling is, he’s quick to answer: it’s the engine bay. The functional, severe exterior just doesn’t prepare people for the sorted, shaved, shiny bay that hides under the bonnet, and it certainly raises eyebrows at shows. And raising eyebrows is what this car was built to do.

    All sorted, then? Job done? Oh, no – Matthew’s far from finished here. “My list of mods isn’t based on winning the lottery, it’s based on money over time,” he says. “I’ve slowly but surely built it to be what you see now, and as time goes on it will only improve. Stay tuned!” We certainly will. But in the meantime, Matthew, you’d better head off along that Parkway. There are childhood dreams there waiting to be fulfilled…

    Ultimately I used autocross and mountain roads to dial in my suspension.

    TECHNICAL DATA FILE Turbo #BMW-E30 Cab / #BMW-M30 / #M30 / #Borg-Warner-EFR / #Borg-Warner / #M30-Turbo / #Megasquirt-MS2 / #Megasquirt / #BMW-E30-Cabriolet / #BMW-3-Series / #BMW-3-Series-E30 / #BMW-3-Series-Cabrio / #BMW-E30-Turbo / #BMW-E30-M30 / #H&R

    ENGINE AND TRANSMISSION 3.4-litre straight-six #M30B34 bored out to 3573cc, #Borg-Warner-EFR-7670 turbo, #Tial 44mm wastegate, 94mm #Wiseco 8.7:1 forged pistons, #ARP head studs, Cometic MLS head gasket, M30B34 high-speed balanced and tuned crankshaft, 9.5 aluminium #Aasco flywheel, M30B35 ported and smoothed head, Cat Cams dual-profile turbo camshaft, IE heavy duty rockers, rocker locks, high performance springs, Rapid Spool Industries exhaust manifold, #Siemens-Deka 60lb/h injectors, Megasquirt MS2 engine management, custom fabricated oil distribution block for turbo feed and gauges, #Qbang engine mounts, Volvo 960 intercooler, Innovate LC-1 wideband controller, heat-wrapped 3.5” downpipe and wastegate piping, 3” straight-through exhaust with Magnaflow resonator and vband couplers, #Getrag-260/6 five-speed manual gearbox, Spec Racing stage 3+ clutch, Z3 short-shift

    POWER 450whp @ 5200rpm, 524lb ft of torque @ 4550rpm

    CHASSIS 8x16” ET20 (front and rear) XXR 521 wheels with 225/50 (front) and 245/45 (rear) #BF-Goodrich G-Force Sport tyres, #H&R-J-Spec front springs with #Bilstein Sport shocks, 650lb rear GE springs and adjusters, #Vorshlag camber plates, E36 steering rack, Treehouse Racing control arm bushings - powdercoated silver, stainless steel brake lines, ATE Orbital grooved front discs with Pagid pads, #Bremmerman cross-drilled rear discs, wheel stud conversion, #AKG 75D 12mm offset rear subframe and diff bushings, #AKG 75D trailing arm bushings

    EXTERIOR Kamotors arch flares, E30 front lip, DIY smoked Hella Ellipsoid lights, all-red taillights, plastic bumper swap, third brake light delete, three-piece Foha spoiler, DIY double brake light upgrade, Shadowline trim, satin finish Olive Drab green paint, Euro grilles, Euro plate filler, late model rear lower valance

    INTERIOR M-Tech 1 steering wheel, #VDO oil pressure, oil temperature and Innovate AFR gauges in DIY centre console, E36 rear view mirror, E34 leather handbrake handle, Justrack Econometer boost/vac gauge, Jaywood digital voltmeter, E36 window switches, brushed aluminium cluster rings and Alpina stripe, Creative Options interior upholstery kit, clutch stop, carpet dyed black, recovered windscreen, UUC weighted gear knob
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    ACCEPTABLE IN THE EIGHTIES

    This super-clean, white, S50-swapped, two-door E30 is a perfect slice of modified ’80s motoring.


    William Green’s E30 harks back to a time when such cars had to be tuned a certain way, and rock a certain look. But he’s given it a modern twist, and a whole lot more horsepower… Words: Daniel Bevis. Photos: C3Photography.

    The 1980s have a lot to answer for. Shoulder pads, Filofaxes, music with synths, Fox-body Mustangs, Grease 2 – there was a lot going on, and much of it was made of brightly coloured plastic. However, the decade wasn’t without its charms; it brought us Cheers, Appetite for Destruction, perestroika, and the charmingly infuriating Rubik’s Cube. And while the TV shows of the era seemed to represent a society eager to eulogise about the easy-going nostalgia of the 1960s – Happy Days, The Wonder Years and so on – the man on the street was firmly on the cutting edge of up-to-the-minute 1980s fantasticality, the sleeves rolled up on his pastel-hued suit, a pair of Wayfarers atop his slicked-back hair, and the keys to an icewhite E30 in his hand.

    Oh yes – in the 1980s, the secondgeneration 3 Series was very much where it was at. From South London to South Central LA, there was one aesthetic that anyone who was anyone aspired to: a white E30, preferably a 325i, low-slung over big wheels, with an M-Tech II spoiler proudly adorning the bootlid. That was the real deal. Sure, Magnum P.I. had his Ferrari 308, Miami Vice was all about the Testarossas, and Michael Knight had his sentient Trans Am, but this was the real world. Real people dreamed of Beemers.

    The lusted-after look of the era is pretty much as you see here, in the form of William Green’s retro-styled throwback. The exterior is so ’80s it hurts, white-on-white-on-white, with merely a whisper of clearance between those crisp glacier-like arches and the broad, chunky five-spokes beneath. All of the requisite M-Tech II accoutrements are in place. If you can ignore the crowds of excitable teenagers Instagramming the thing with their iPhones and tune out the chemtrails from all the wi-fi signals, you could almost be glimpsing into an authentic late-1980s scenescape.

    Ah, but there’s a twist. All’s not as periodcorrect as you might think here – when you peel back the skin and scratch around among the pulpy flesh below, you’ll discover that William’s got one or two restomod tricks up his sleeve…

    “I’ve always been a car modifier,” he says, enigmatically. “It all started with my first car, a 1986 VW Golf GTI with a supercharged G60 Corrado engine swap; BMWs came second to VWs at the time, as I then went on to own a ’92 GTI and a ’95 GTI.”

    ‘Yes,’ I can hear you shouting into the magazine, ‘but when do we get to the E30?!’ Alright, chill out – we’re coming to it. But before we reap the rewards of patience, we need to sow the seeds of an entirely different 3 Series.

    “I came across my first E30 when I was in college,” William reminisces, an orchestral James Horner soundtrack swelling in the background. “It was a gunmetal grey 1988 325ix – two-door, five-speed – that was completely refurbished, it looked like a brand-new car. Being a broke college student, I begged my mother to get me that car; she did, and it was the best gift I ever received! I brought it back to college in the Catskill Mountains of NY and the ix really lived up to its name – the all-wheel drive system was flawless.” A handful of wellchosen modifications followed – a custom exhaust, chip tune, intake and coilovers – but nothing too extreme. This wasn’t like that first, manic, engine-swapped project, this was a super-tidy base so he was taking baby steps. The quality of the car spoke for itself really, as three years later a chap drove two thousand miles to make William an offer he couldn’t refuse. And with that chapter behind him, it’s safe to say that he’s firmly made the ideological leap from Wolfsburg to Bavaria. A 2006 530i followed, and then a 2002 M3, but it wasn’t too long before our protagonist began once again hankering for the old-skool. His retro yearning was twofold; firstly after the nostalgia of the 1980s that so many of us of a particular age are unable to escape from, but secondly due to the absolute perfection of his first E30. It was time for history to repeat itself.

    Okay, people may say ‘never go back,’ but that’s a load of old toffee. ‘Once bitten, forever smitten’ – that’s more of an appropriate mantra here (ignoring the fact that it comes from an old Vauxhall advert, obviously), and William was more than ready to dive back into the rose-scented waters of E30 ownership.

    “I found this ’80s baby in a high-end luxury car dealer just south of Los Angeles,” he explains, effortlessly reeling off a phrase that you could imagine on a T-shirt in H&M. “The car was being sold on consignment, and belonged to the son of the owner’s best friend. It was an unfinished project, and the exterior was probably an 8/10 – and that’s what sealed the deal on buying the car! I knew that everything still left to do was stuff I could take care of myself.”


    The car was already fitted with an S50 motor – y’know, like you’d find in an E36 M3 – but it was, shall we say, well used, having chalked up over 140,000 miles. William’s initial plan was to swap it out for an S54, although having weighed up the costs and taken an objective view, he decided to persevere with the S50 and give it a refresh and rebuild. After all, they’re robust old lumps. Hell, 140k is barely run in, right?

    “It needed a rebuild pretty much straight away,” he reasons. “The compression was off on two cylinders, so I went ahead and had the head rebuilt and that took care of the engine problems. I also went with the M50 manifold and the S52 exhaust manifold, custom pulleys, injectors, high-flow MAF, and 3.25 LSD. There were a lot of modifications made along the way but these were the initial mods to get the car the way I wanted it.”

    The fact that the previous owner had made inroads into the project helped out a lot, as it was already wearing a fresh, periodperfect, ice-white 1980s paint job when William took delivery. He was able to augment this with the oh-so-cool M-Tech II goodies to create that retro style, and it has created what William describes as ‘a neck-breaker’.

    “This car has always been a conversation starter at pretty much every car meet or gas station I go to. People love the body kit and the Magnum 17s. Most people go with BBS rims so I decided to stick with a wheel that’s different and displays all the inner workings. I recently started doing autocross too, and this build is perfect for the courses.”

    You can imagine how that newergeneration M3 motor helps out when it comes to sporting endeavours, but this car is far from a laser-focused track build; indeed, the interior is something quite special. Up front are a pair of E36 M3 Vaders in black leather, with an E30 M3 bench out back trimmed to match. The E30 M3 gauge cluster was painstakingly rebuilt by an Instagram user by the handle @e30_dad, while the vacuum-of-space effect of all the blackness (the seats, the carpet, the headlining, it’s everywhere) is neatly complemented by a cunning custom audio install that, among much else, features a pair of 8” subs hidden inside the rear panels.

    William, like so many feature car owners we talk to, has an obsessive and completist eye for the details, manifested here in the fresh lights, the commitment to the Stormtrooper black/white colour-coding, the OEM+ interior embellishments of disparate provenance, and the cherry picked chassis parts that comprise E36 M3 suspension and brakes, some M Coupé bits and bobs, and a super-tight Z3 steering rack.

    In fact, it’s fair to say that this is more than just a car to him. “This car has also inspired me to start my own small business, www.e30head.com,” says William. “I designed an E30 centre console cupholder that was once an old BMW idea that I brought back to life. The enthusiasts love it! And yes, the S54 swap is still a plan that will get executed – I put that build on hold last time because we were having our first child and those funds needed to go to more important purchases, but the timing will be right one day.” And in the meantime, he gets to enjoy a nice thick slice of aspirational nostalgia, rolling the kind of ride that everybody looked up to back in the good ol’ days. Acceptable in the Eighties? Ah, it was more than acceptable. It was rad, def, way cool, totally tubular. And it still is.

    The exterior was probably an 8/10 and that’s what sealed the deal on buying the car!

    DATA FILE S50-swapped #BMW-E30 / #BMW-E30-S50 / #BMW

    ENGINE AND TRANSMISSION 3.0-litre straight-six #S50B30US / #S50B30 / #S50 / #BMW-S50 / , custom 3” #Magnaflow exhaust system with high-flow cat and resonator, TMS underdrive pulleys, custom underdrive crank pulley, TMS Jim Conforti remap, new water pump, thermostat, alternator, intake, oil pump, gaskets, TPS, radiator and hoses, E30 M3 wiring harness cover, OBDII E36 exhaust manifolds, E30 Motor Werks skid plate, E36 M3 five-speed gearbox, E30 M3 propshaft, E36 M3 guibo, 3.25 LSD with M Coupé cover, M Coupe halfshafts


    CHASSIS 8.5x17” (front and rear) #MVR-Magnum wheels with 215/40 (front and rear) Falken 512 tyres, TC Kline S/A coilovers, #Vorshlag front camber plates, #K-Mac rear adjustable camber/toe bushings, E36 M3 front suspension and brakes, E36 M3 five-lug rear conversion including brakes, #Zimmerman drilled discs all-round, ’96 Z3 2.7 lock-to-lock steering rack, E32 750il brake master cylinder, custom brake booster

    EXTERIOR Full respray, #M-Tech II bumpers, side skirts, lip and spoiler, replica #M-Tech II front valance, 6000K Xenon headlights and foglights, new tail-lights, smoked front indicators, black kidney grilles, colour-coded door handles, headlight wipers

    INTERIOR E30 M3 gauge cluster, E36 M3 gear knob, E32 leather handbrake handle and gaiter, E36 M3 Vader seats, E30 M3 rear seats, black door panels, M-Tech II steering wheel, black carpet, black headlining, #Alpine CD head unit, 2x custom hidden #MTX-Thunder6000 8” subs in rear panels, Rockford Fosgate 250 two-channel amp and 600 four-channel amp, Kicker speakers

    THANKS I’d like to give special thanks to my wife, Ashleigh, who inspired me to start E30Head. To Raphael with Ore Photography Group – without his excellent shots of my car, I don’t think we’d be doing this interview. Diego, the E30 Cluster Master @e30_dad, my biggest supporter from the start. Scott with Renown USA for being one of the first to support my E30 centre console cupholder design

    S50-swap is so neat it looks like it could have been a factory job and it gives this E30 some serious go.

    This car has always been a conversation starter at pretty much every car meet or gas station I go to.
    Stream item published successfully. Item will now be visible on your stream.