- Post is under moderationV8 E36 6.2-litre LS3-powered Saloon. Subtle on the outside, brutal on the inside, this super-clean M3 packs a 500whp V8 punch. Words: Elizabeth de Latour Photos: Jordan Unternaher
STREET FIGHTER 6.2-litre #GM-LS3 / #V8-swapped / #BMW-E36 /
It would seem that if you wish to insert a large, American V8 into a BMW then the E36 is the vehicle of choice. While BMW never put anything bigger than a straight-six into that capacious engine bay, Alpina squeezed eight cylinders under the bonnet for its B8 4.6 way back in #1994 , showing everyone that not only could it be done but that it was definitely a good idea.
We must have featured more LS-swapped E36s than any other model of BMW that has undergone the heart transplant but we’re certainly not complaining. And how could you when you’re being stared down by an LS3 E36 M3 that’s as clean and downright sexy as Brian Cain’s example? The exterior exudes nothing but subtlety while the engine bay is clean enough to eat your dinner off. And the interior drives the point home that this E36 ain’t nothing to mess with…
That Brian’s ended up with a hunk of American muscle in his E36’s engine bay is less of a surprise when you learn that his first car was a 1987 Pontiac Trans Am and that he currently owns no less than nine BMWs. This car is the perfect blend of home-grown V8 from his youth and the Bavarian marque that stole his heart ten years ago. “I was always fascinated by the engineering and the history of BMWs,” he tells us. “But I was never able to afford one while I was growing up. I love the history of automobiles and how they came to be. #BMW has always kept its roundel logo, the kidney grille design and the signature Hofmesiter kink on the rear quarter glass. Small details like that just speak to me.
“My first BMW was actually this M3. As I was growing up, I remember the E36 M3 being released. It was such a great looking car. I had model cars of it and posters but I always thought it would be out of my reach. When I was finally able to afford one, I had to jump on it. I was searching for an E36 M3 Saloon. It had to be a Saloon. I wanted either Hell red or Dakar yellow and I found this red car in Las Vegas, about 2000 miles from where I live.” But when a car is good it’s worth travelling for, and this M3 was very good indeed. “It was a one-owner, low-mileage, flawless example,” Brian grins. “The next thing I knew, I’d booked a plane ticket and flew out to get the car. I drove it home over a three-day span, collecting a couple speeding tickets along the way!”
Initially, the M3 served as Brian’s daily driver but, having grown up around hot rods, having owned a Trans Am, and having modified a selection of Hondas, the pieces of the puzzle begin to fall into place – although Brian never anticipated taking things quite this far. “I knew I was going to do coilovers, the exhaust, the wheels and other basic things,” Brian says. “And I drove the car as a daily driver for almost six years. It was always kept in amazing condition but after putting nearly 100k miles on it I wanted to redo it. I have always been into hot rods and V8 cars, so I knew I wanted to do an LS swap. This was still when LS swaps were relatively uncommon on these cars. I started to doing research on what I would need and how I would set everything up. I had a general plan on paper before I even started. I went to a local wrecking yard where I sourced an LS3 engine from a wrecked Corvette. I took it home and immediately stripped it back to a bare block.”
Clearly the best time to add stuff that’s going to make even more power is while the engine is out of the car and no corners were cut when it came to slathering it in go-faster bits, as Brian explains: “Items I added included: Katech rod bolts; a high volume oil pump; CNC-ported heads; a custom grind cam; Comp push rods and rockers; LS7 lifters and seven-layer head gaskets; a ported intake manifold; a FAST 92mm throttle body and fuel rails; and 60lb injectors with Aeromotive Stealth fuel pump handle fuelling. The Vorshlag engine mounts are the only swapped parts used.
Everything else was custom fabricated in-house at the shop Brian owns, MWorks Garage. The 4” intake was custom-made in-house and American Racing headers are mated to our custom dual three-inch exhaust. The cooling system utilises a Zionsville radiator with heat shrink hose clamps for a clean look and I made the entire engine harness from scratch; I wanted it clean looking to complement the shaved engine bay but still serviceable so the engine runs on a completely separate fuse box and control from the rest of the car. Everything under the hood is powdercoated by Killer Koatings in Covington, Kentucky. The transmission is a T56 from a 2002 Camaro SS which has been completely rebuilt as well. Pretty much anything you could do to strengthen the transmission has been done, and gears are changed through a custom MGW shifter. Mike at Proxses Tuning in Dayton, Ohio tuned the car and currently it produces 496whp and 477lb ft.” Brian says this with the sort of casual understatement you would not expect from someone with a V8-powered E36 putting out somewhere in the region of 550hp.
Of course, putting together an engine that powerful is one thing but building a car that can handle it is another matter altogether, and no stone has been left unturned, no component left unmodified when it came to ensuring the chassis was up to the task. “The suspension has been completely overhauled,” says Brian, “with a combination of both stock and aftermarket parts.
The coilovers are all completely custom and have been built using Ground Control custom valved double adjustable dampers and custom spring rate Eibach springs. We made the adjustable control arms in-house while camber is controlled through Vorshlag camber plates up front.” While the transmission had been suitably beefed-up to handle all that power and torque, Brian still had to ensure that it would actually reach the rear wheels without obliterating any components along the way, so the drivetrain has undergone some heavy modifications. Power is sent along a custom-made three-inch aluminium propshaft with 1350 U-joints to a Ford Mustang Cobra 8.8 IRS diff using a Detroit TrueTrac LSD with 4.10 gears and onto the wheels via DriveShaft Shop axles. “I went with the Ford differential after going through two 188mm BMW diffs and completely twisting up a subframe after the second differential broke apart,” says Brian.
“Needless to say, it took some creative design, planning, and geometry to get everything working correctly together but it should be good for the 1000hp range.” This should provide ample future-proofing for whatever further mods Brian might have up his sleeve.
With masses of power on tap, the importance of stopping cannot be overlooked and while this E36 hasn’t been fitted with a BBK, the brakes have been suitably uprated and are now more than up to the job. Brembo discs have been fitted along with Performance Friction pads and Bimmer World braided hoses. The ABS has been deleted and Brian has added a Tilton proportioning valve to adjust the brake bias.
As far as the styling is concerned, Brian has opted to keep things subtle but, while at first glance this E36 might appear almost completely standard on the outside, there’s more going on here than meets the eye; there are lots of subtle modifications that are easy to miss. Up front, the foglights have been shaved to give the bumper a much cleaner, unique look and an AC Schnitzer front lip has been added to make the car look even lower. Euro headlights have been fitted and smoked indicators, markers and rear lights have been added. At the rear the boot spoiler has also been shaved.
However, the most involved exterior modification, which also happens to be Brian’s favourite mod on the entire car, was a direct result of his wheel choice. “I have always been a fan of CCW wheels,” he says. “And I wanted a wheel that had my exact specifications and finish: 9x17” fronts and 10.5x17” rears. Killer Koatings of Covington, Kentucky did the powdercoating and I did this when black wheels were almost taboo, everyone was still running polished wheels. Now you see almost every company offering this look of gloss lips with matt faces. When we were fitting the wheels, we didn’t want excessive camber, so we cut the rear quarter panels under the rear bumper and pulled them out by almost an inch on each side. The result is factory-looking car (most people would never notice the wider rear arches) whilst still being able to fit an aggressive wheel with less than one degree of camber.” Once you know what he’s done here you know, but from anything other than the right viewing angle those pumped-up rear arches disappear completely, blending into that blindingly brilliant red bodywork. Even gazing down the car’s flanks you still need to know what you’re looking for to actually notice the subtle swelling.
While the exterior is a picture of subtlety, the interior definitely means business and there are some choice mods in here. The original grey interior was swapped for an all-black one and Brian retrimmed the headlining and pillar panels in black suede. A pair of red and black Recaro Wildcat seats were added, along with red Scroth Racing harnesses, and there’s also a Nardi steering wheel and Euro M3 gauge cluster. The finishing touches are custom gear and handbrake gaiters made by Brian’s girlfriend Kaitlin, who runs StitchBoots and does custom automotive interior work.
In case you couldn’t tell, we are big, big fans of Brian’s E36. The engine swap is awesome but it’s all the other performance upgrades that take this car to the next level. It’s the level of dedication that has been applied to every aspect of the build that makes it so special. A lot of work has been poured into this build and you can see it everywhere you look, it’s the sort of build you aspire to. There’s more to come, too, as Brian explains: “The car was recently sponsored by Vortech Superchargers who sent me a V3 setup. I hope to have it on soon, set in the 22-26lbs of boost range. It should make for a pretty wild ride.” Considering how wild this E36 already is, we can’t wait to see it.
DATA FILE BMW #BMW-LS3 / #V8 / #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #BMW-M3-LS3-E36 / #BMW-M3-LS3 / #BMW-3-Series / #BMW-3-Series-E36 /
ENGINE 6.2-litre V8 / #GM-LS3 / #Corvette-engine , #Katech rod bolts, Telling high volume oil pump, LS1 oil pan, LS1 accessory drive, SLP crank damper, CNC-ported heads, custom grind #Comp-Cams camshaft, Comp Cams pushrods, rockers and timing chain, #LS7 lifters, LS7 seven-layer head gaskets, #ARP head bolts, ported LS3 intake manifold, FAST 92mm throttle body, #FAST fuel rails, #DeatschWorks 60lb injectors, #Aeromotive-Stealth 340gph fuel pump, AN-6 fuel lines, Vorschlag engine mounts, MWorks Garage wiring harness, MWorks Garage throttle bracket, MWorks Garage full V-Band exhaust, American Racing Headers exhaust manifolds, Zionsvile radiator, #MWorks-Garage expansion tank, MWorks Garage four-inch intake
TRANSMISSION 2002 #GM-Camaro-SS-T56 six-speed manual gearbox, #MGW shifter, steel shift forks, bronze shift pads, hardened steel bearing spacers and sleeves, #McLeod-RXT twin-disc clutch, Cincinnati Driveline propshaft, Ford 8.8 rear differential, Detroit TrueTrac LSD, 4.10 Ford Racing ring and pinion gear set
CHASSIS 9x17” ET20 (front) and 10.5x17” ET20 (rear) #CCW-LM20 wheels with matt black centres and gloss black lips, 235/45 (front) and 255/40 (rear) Falken tyres, #Ground-Control double adjustable coilovers, #Eibach custom rate springs, Vorshlag camber plates, Ground Control rear upper shock mounts, MWorks Garage rear lower control arms, Treehouse Racing front LCA bushings, MWorks Garage LSx power steering setup, Tin Soldier Race Cars modified subframe, Performance Friction brake pads, #Brembo discs, Bimmer World braided brake hoses, ABS delete, Tilton proportioning valve, MWorks Garage ABS delete hardlines
EXTERIOR Rear quarter panels widened one-inch, shaved front foglights, Shadowline grilles, Euro face-lift headlights, smoked corner lights, smoked side markers, smoked taillights, shaved rear spoiler, AC Schnitzer front lip, CQuartz Finest paint coating
INTERIOR #Recaro-Wildcat seats, MWorks Garage seat brackets, #Nardi steering wheel, Euro M3 gauge cluster, Schroth Racing harnesses, #Bavarian-Sound-Werks speakers, suede headliner, A-, B-, C-pillars and rear deck, black interior conversion, #StitchBoots gear and handbrake gaiters
THANKS I want to thank my parents first and foremost – they always told me to follow my dreams and supported me 100% in my decisions. Unfortunately, my mother passed away three months before we did this photoshoot. My girlfriend Kaitlin, owner at StitchBoots Automotive Interiors. She is with me every day at the shop, wanting to participate in all our projects. Eddie Wright and Greg Huber at Fast Eddies Auto Salon. Paul Montgomery at Eastside Auto Spa. Mike Pirnia at Proxses Tuning. Kenny Meade and Mike Karwath at Killer Coatings. Everyone at 1310 MotorsportsStream item published successfully. Item will now be visible on your stream.
- Post is under moderation
Gorgeous bagged #BMW E30 with an #S52 swap and shaved bay
KEEPING IT IN THE FAMILY
In the same family for almost 30 years, this ridiculously clean E30 has undergone quite a transformation in that time. Some heirlooms leave a more lasting impression than others, as we discover when we meet Nick Lanno from Ohio. Words: Louise Woodhams. Photos: Patrick McCue.
It’s not often a car stays in the same family for almost 30 years, yet this 1987 325iS is the very same car that delivered Nick Lanno – the subject of our story – from hospital when he was born, and 15 years later became his first car.
That was in 2009, and Nick, now aged 22, has completely transformed the car from what it once was. He takes up the story: “My father bought the car brand-new from David Hobbs BMW in Chillicothe, Ohio, and he drove it on a daily basis right up until my teens, so it was always in the garage while we were wrenching on other vehicles together. That’s where my passion for cars started.”
Nick couldn’t help but fall in love with the E30 and as soon as he was old enough he began to research these cars. That’s when he got hooked on the blue and white roundel, as he explains: “The fact that they are truly a driver’s car is what attracted me to them the most. The heritage and history behind all these classic BMWs that people own is so interesting and they almost always carry a great story. I love every car BMW has made to this day and I will always be a BMW enthusiast.”
This was the car that took Nick to school, to soccer games, to friends’ houses, you name it – it was a huge part of his life and quite often he would while away the hours thinking how incredible it would be to own it one day. In 2000 it went into storage, and then, much to Nick’s surprise, nine years later it was taken out of storage and given to him on his 15th birthday! His childhood dream had come true.
“There was no other E30 I would rather have had than this car. It was perfect and despite having clocked up 120k, it was immaculate; all OEM parts, original paint, absolutely rust-free, and it had a full service history,” he recalls.
Needless to say it did not stay 100 per cent original for long. In fact, the first thing Nick did as soon as it was in his possession was lower it on a set of Ireland Engineering race springs. Other modifications included all red tail-lights, smoked Euro Smiley headlights and side repeaters, a later model front valance and a Zender rear valance. Shortly after that, the car then went back into storage so that over the next few years Nick could save some money and let the real transformation begin.
Once again it was the suspension that demanded Nick’s attention first: “After pouring through different forums looking at the various setups, I knew that to get the drop I really wanted I’d have to look into a custom air-ride setup.” Up front he’s installed Air Lift’s Crafter Series struts, while Air House II bags and Bilstein shocks reside out back. The rear spring perches were modified for the bags, as were the front spindles for the struts. The system is managed by Air Lift’s Autopilot V2, with plenty of presets all at the tip of Nick’s fingers in the centre console. “The setup is so convenient, making road trips as comfortable as can be, yet the car still handles fantastically in the corners. I have the best of both worlds,” he adds.
The car remained in this guise for the next three months, until one fateful day when the timing belt from the original M20B25 snapped. This prompted the next stage of the build. “I sourced a low-mileage S52B32 out of a 1999 M3 from a good friend in Cincinnati with roughly 70k on it,” Nick says. “I completely regasketed the motor from top to bottom, as well as safety wiring the oil pump nut, before fitting 21.5lb injectors, a lightened flywheel, and a 3.5” intake setup.” Together with a few friends, the swap took about a week to do. Apparently the maiden voyage with open headers put one of the biggest smiles on Nick’s face to this day. Not surprisingly it came to life as a completely different beast that day.
After two years of driving it across the States to various shows, Nick wanted to take the car to a new level – he wanted to shave, tuck and customise the engine bay. Fortunately a good friend of his owned a body shop so once Nick had pulled out the engine to take care of tidying up the wiring harness and deleting any non-essentials such as air-con and power steering, the car was sent off for six months to begin its transformation. “Everything looks so neat and beautiful under the bonnet now, but the star of the show has to be S52. It is so reliable and has plenty of power to make the car feel a blast to drive. It brings a smile to my face every time I’m behind the wheel.”
Whilst this car’s spec is a far cry from when Nick’s father bought it all those years ago, it’s still managed to retain its factory charm. And that’s because his objective throughout the build has been to keep things clean, simple and classy. The same philosophy has been applied to the cabin of the car, which is relatively stock save for the Nardi steering wheel, custom stitched M-Tech style gear knob and gaiter and Coco mats, which are all period-correct for the car. “I wanted the car to retain its original feel,” Nick says. “I’ve even kept the seats, which are fairly worn now, but it gives it character.”
Like any true project, the car has gone through various incarnations of wheels, including BBS RSs and CCWs, but Nick eventually settled for 8.5x16” (front) and 9.5x16” (rear) Schmidt TH Line wheels shod in 205/40 rubber that you see on the car now, and we have to say that they suit the stance, lines and age of the car perfectly.
This is not a car created with a blank cheque book; it is a car with tons of sentimental value to the owner and gradually improved over time with the help of friends and family. It’s been built to drive and to enjoy, it doesn’t sit in a garage or on a trailer and we love the fact that whilst Nick put his own stamp on it he’s taken a wholly sympathetic approach in his choice of modifications. Now it’s finally complete all he plans to do is simply drive it. “It has taken a lot of effort to get the car to where it is today but it was a journey which has led me to meet a lot of fantastic friends and I wouldn’t trade it for anything else. The car is a big part of me and something I am most definitely proud of.”
Along with the life lessons and skills that a father teaches a son, there are also certain material things that you pass down – like a tool kit or, in Nick’s case, a dream car. In these increasingly disposable times, fewer and fewer items are worth saving and giving to your children, so we hope Nick sticks to family tradition and passes his treasured 325iS to his own son or daughter.
DATA FILE #BMW-325iS #S52 air-ride #E30 / #BMW-325iS / #BMW-325iS-S52-E30 / #BMW-325iS-S52-Air-Ride-E30 / #BMW-325iS-E30 / #BMW-E30 / #BMW-E30 / #S52B32 / / #BMW-S52 / #Bimmerworld / #Getrag-260 / #BMW /
ENGINE 3.2-litre straight-six #S52B32 / , 21.5lb injectors, 3.5” #Euro-MAF , 3.5” #Bimmerworld-Silicone intake boot, air-con and power steering delete, #M42 radiator, TMS remap, Condor Speed Shop engine mounts, custom longtube headers and 2.5” exhaust including #Vibrant race resonator; shaved, tucked and resprayed engine bay
TRANSMISSION OEM #Getrag 260 five-speed gearbox, #Sachs-HD clutch, #MWorks-Garage custom transmission crossmember, #Condor-Speed-Shop Speed Shop transmission mounts, lightweight flywheel
CHASSIS 8.5x16” (front) and 9.5x16” (rear) #Schmidt-TH-Line wheels with 205/40 (f&r) Nitto Neogen tyres, #Air-Lift universal front struts, #Air-House II rear bags, #Bilstein rear shocks, #AutoPilot V2 management including five-gallon tank and #Viair-400C compressor, drilled and slotted brake discs and Hawk pads, brake booster delete, E21 master cylinder, tucked brake lines, stainless steel braided clutch slave line
EXTERIOR Later model front valance, iS front spoiler and bootlip, smoked Euro Smiley headlights and side repeaters, all red tail-lights, #Zender rear valence, #Shadowline trim
INTERIOR Nardi Classic steering wheel, custom stitched #M-Tech-style gear knob and gaiter, Coco mats, #Dynamatted back seat and boot
THANKS All of my good friends in BHC, and those that had a hand in the build, my father and Anthony at ASC Autoworks
Front end, like the rest of the car, is incredibly clean, with a late model valence and iS front spoiler. #AutoPilot-V2 management offers eight presets and countless options; gorgeous 16” Schmidt splits suit the E30 perfectly.
The car is a big part of me and something I am definitely proud of.Stream item published successfully. Item will now be visible on your stream.