- Post is under moderationPOWER UP Hardcore, supercharged E46 330Ci
What was once a stock 330Ci has now evolved into a supercharged, track-focussed monster. Words: Elizabeth de Latour Photos: Viktor Benyi.
’CHARGED BMW E46 330Ci Track-focussed full-on build…
Supercharging a “lesser” model of BMW is something that a lot of people don’t really understand. “Why didn’t you just buy an M3/ M5/M6 in the first place?” they will ask and, in absolute terms, you can see their point. Why spend arguably the same amount of money, or perhaps even more, buying and subsequently supercharging something that isn’t an M car and ending up with around the same sort of power level, when you could have just bought a fully-fledged, finely-honed M machine in the first place? It’s a valid, logical point, but logic has little place in the world of modifying. The thing is that very few people buy a car knowing exactly where they’re going with it, how it’s going to end up and with the specific plan of supercharging it. Sure, some people do, but take a look through this issue, the last issue, pretty much any issue of the mag and you’ll see feature car after feature car owner saying that they really had no intention of going as far as they did with their cars. The other thing is that, generally speaking, something like a supercharger is usually one of the last mods anyone does and that’s because it makes a lot more sense – and here logic can be applied to modding – to sort out the chassis, the brakes, make sure everything else is up to scratch before you start ramping up the power. It’s the right way to do it, really.
Which brings us neatly to Richard Kiraly and his supercharged E46 330Ci. As you can probably tell from the pictures, this is one exceptionally well-sorted 3 Series and, as you won’t be at all surprised to learn, when Richard bought the car there was no plan for anything beyond the most basic of mods, let alone creating a car as full-on as this has ended up becoming. Richard has been a BMW owner for 12 years, though that time period has been divided up between just three cars: his first BMW, an E34 525tds, which was followed by an E39 525d, and now the E46. Thing is, while he may say there was no plan of attack here, both of his previous Bavarian steeds, and a couple of cars before that, have all received some level of mild modding, so we reckon he wouldn’t have been able to leave the E46 alone anyway.
Hailing from Hungary, Richard’s hunt for the right example of what was the most affordable way of fulfilling his childhood dream of owning a frameless window coupé took him all the way to Leipzig in Germany, after six months of searching, and what was then a plain old 330Ci Sport. With car in hand, the mods began and stage one was styling. The E46 Coupé is a fi ne-looking thing, we’re big fans, but go big or go home, right? Go big it was, with Richard giving his 330Ci the M3 look courtesy of the M car’s wings and bumpers before cranking things up to 11 and taking the styling to another level. The front bumper has been seriously beefed-up with the addition of that carbon lip and those full-on corner splitters and even the intakes that funnel cooling air to the brakes are made from carbon. The bonnet? That’s carbon too, a vented GTR item that’s been painted body colour with just the slats of the vents left bare, teasing its carbon construction. M3 mirrors have been added while at the rear there’s a unique diffuser, a set of LED lights and a fibreglass CSL-style boot lid to finish things off nicely. It’s a greatlooking car, all the styling enhancements blending together perfectly and with the M3 body parts on board, the more aggressive aero elements don’t overwhelm the look of the whole car.
The wheels are Japan Racing JR3s, which suit the look and direction of the car perfectly, and while their familiar sixspoke design doesn’t get your attention, the colour certainly does. It’s a bold, bright blue that doesn’t tie-in with anything, anywhere on the car but wow, does it look good. Somehow it just works so well against that sexy, solid grey paintwork and your eyes are immediately drawn to the wheels. They’re the first thing you notice on the car and you realise that, actually, opting for that punch of colour was definitely the right thing to do as it really makes them stand out. You can probably tell that this car hasn’t been built for show, it’s all about go, and peering between the spokes of the JR3s confirms that beyond any reasonable doubt as that’s when you notice the massive brakes. The calipers come from a 135i, says Richard, with six-pots up front clamping M3 CSL discs, and two-pots at the rear while the suspension has also been suitably uprated and these mods came about when he decided to start making track outings a regular occurrence. BC Racing coilovers have been fitted here, and they deliver a solid drop, along with uprated anti-roll bars, Powerflex bushes, Eibach adjustable rear control arms and front and rear strut braces, completing a comprehensive programme of upgrades. The interior changes, too, have come about from the car’s regular appearance at track days and amateur tournaments; up front, a pair of bucket seats have been fitted, along with a set of Schroth three-point harnesses, while the rear seats have been removed altogether, as has the air-con. White-faced dials have been added to give the gauges a sportier look and Richard has also fitted a digital display in place of one of the central air vents to keep an eye on various under-bonnet temperatures.
So, to the engine. The M54B30 is a great motor, plenty of torque, a lovely top end, plus it sounds lush but by modern standards it’s not going to set anyone’s world alight and with him being so committed to track driving, you can see why Richard wanted a little more performance. NA mods are fi ne and could liberate a bit more horsepower but if you want serious gains then you have to bring out the big guns and go straight for forced induction. What Richard’s got strapped to the side of his engine is an ESS TS1 supercharger kit, which uses a twinscrew, positive displacement blower, and that means it delivers a huge hit of low-end torque the moment you hit the accelerator, perfect for punching out of turns on track. It’s an impressive piece of kit and puts out some meaty numbers, 320hp and a very healthy 302lb ft of torque. Here it’s been further bolstered by the addition an #AFE high-flow intake, a set of Schmiedmann high-flow cats and a ProEx exhaust system with racing silencer while an S54 oil cooler helps keep temperatures down on track. The transmission hasn’t been forgotten about, either, and Richard’s fitted a lightweight flywheel and Sachs race clutch plus an LSD to help him put all that power down.
We really like Richard’s E46. It’s been built with purpose after being bought with no specific direction in mind. It’s a focussed and finely-honed machine, but one that’s not so extreme that it can’t be used on the road. It looks good and it’s got the power to match the extreme aero additions; it really is an exceptional performance package. Richard has spent eight years getting the car to where it is today, but he’s not done yet and the next round of mods is imminent. “I want to cover the interior in Alcantara,” he says, “and I’ve currently got a CSL front bumper with twin brake air inlets under construction and I’ve also got an ESS TS2+ supercharger kit ready to go,” he adds, which is really going to take this E46 to the next level.
TECHNICAL DATA FILE #BMW #Supercharged / #BMW-E46 / #BMW-330Ci / #Japan-Racing / #ESS-TS1 / #ESS-Tuning / #BMW-330Ci-E46 / #BMW-330Ci-Supercharged / #BMW-330Ci-Supercharged-E46 / #BMW-3-Series / #BMW-3-Series-E46 / #BMW-3-Series-Coupe / #BMW-3-Series-Coupe-E46
ENGINE AND TRANSMISSION 3.0-litre straight-six #M54B30 / #M54 / #BMW-M54 , #ESS-TS1-supercharger-kit , #AFE air filter, #Schmiedmann sport cats, #ProEx exhaust system with racing silencers and black heat-resistant quad tips, S54 oil cooling system. Five-speed manual gearbox, lightweight flywheel, #Sachs racing clutch, short-shift kit, #LSD
CHASSIS 8.5x18” ET15 (front) and 9.5x18” ET15 (rear) #Japan-Racing-JR3 wheels with 225/40 (front) and 255/35 (rear) tyres, #BC-Racing coilovers, uprated anti-roll bars, #Powerflex bushes, #Eibach adjustable rear control arms, front and rear strut braces, #Brembo six-piston calipers with M3 CSL discs (front), #Brembo two-piston calipers (rear), braided brake lines, competition brake fluid
EXTERIOR E46 M3 wings, front and rear bumpers, carbon front splitter, front bumper race air intake, GTR carbon bonnet, E46 M3 door mirrors, custom rear diffuser, E46 M3 CSL-style boot lid, LED rear lights
INTERIOR White gauges, digital data display in central air vent, bucket seats, three-point Schroth harness, rear seats removed, air-con removed, spare wheel well removed, fire extinguisher
“What Richard’s got strapped to the side of his engine is an #ESS-TS1 supercharger kit, which uses a twin-screw, positive displacement blower”
BC Racing coilovers with adjustable top mounts.
135i brakes have been fitted all-round.
“The wheels are Japan Racing JR3s… and while their familiar six-spoke design doesn’t get your attention, the colour certainly does”
Bucket seats, harnesses and rear seat delete let you know this E46 means business.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationCUSTOM 2002 Metal wide-body with a 2.7 swap.
Bought in a state far beyond saving, the only way this #BMW-2002 could survive was to be transformed into something completely different.
SHOW, NO SHINE Custom, wide-body 2.7 2002 / Words: Elizabeth de Latour / Photos: Matt Richardson
It feels like we maybe we should be apologising, again, because for the second month running we’re featuring a 2002 that a lot of people are going to find upsetting. But we won’t be, because we like it too much to care what anyone else thinks. It’s unapologetically a personal project, built solely for the pleasure of its owner, Josh Parker, to hone his skills and then show them off. From top to bottom, inside and out, everything you see before you has been crafted by Josh’s own two hands, with a bit of help from dad along the way, which makes this already spectacular 2002 even more so.
Josh has always been into cars, he tells us, and it all began at the tender age of 12 when he was given a petrol-powered R/C car and building that set him on path he walks today. After passing his test he was chomping at the bit to get modding on something, though insurance restrictions meant he had to make do with an R56 MINI JCW, spiced up with some coilovers and other bits until he could make his dream of doing a full build come true. The fact that he had no mechanical or motorsport experience was not going to stop him and there was no practice run or warm up before getting this car, he went straight from 0-2002.
“I bought the car in Thame just over three years ago,” explains Josh, “and it was awful,” he adds, laughing. “It had been off the road since 1989 and was in terrible condition, completely rusty, but because of that I only paid £1200 for it. It took two years to put it together, though in its first form it had a different engine, Golf arches and different wheels. Starting out, I knew nothing about welding or anything like that,” he says, “so the first step was getting it on the road and then, having developed my skills, I knew I could do everything better the second time around so 18 months ago it went through a big change,” and the result of that is what you’re looking at here. “The fact that I wanted to do everything on the car myself was a big influence on how the car has come out, “ he explains, “as I went my own way with it. I spent a year making the chassis strong and replacing stuff. The car was a blank canvas, it was so bad I couldn’t make it any worse,” he laughs. “The whole car looked like Swiss cheese, but at least I got to practice welding. The whole project has been hard, though, it’s taken a long time as I was starting from nothing. I spent a lot of time doing individual things, weeks at a time, and sometimes I needed to take a break, step away, but I never gave up.
“My decision to change how the car looked came about when I realised that too many people were doing Golf arches, it wasn’t low enough and that I didn’t like the wheels. I decided to pick the wheels I wanted and then built the new, custom arches around them and doing that meant I could go for a really aggressive offset. I chose a set of 7Twenty Style44s in bronze, 9x15” ET0 all-round with 215/50 tyres; I didn’t want too much stretch but needed a bit to get the wheels to tuck under the arches.” The resulting fitment is absolutely perfect, but even with that zero offset Josh is still running 20mm spacers up front and 10mm at the rear, taking the final offset well into the negative. The wheels themselves are certainly handsome, single-piece items with stepped lips and plenty of dish, while the matt bronze finish looks great against the car’s patchwork quilt bodywork.
Where Josh felt the car wasn’t low enough before there’s no such concern now, with Gaz coilovers delivering a serious drop, but that wasn’t enough for him… “I’ve raised the front and rear strut towers by 40mm to lower it even further,” he grins and the end result is spectacular, the tyres disappearing up into those magnificent arches and the 2002’s belly sitting a hair’s breadth above the ground. The arches themselves are custom metal items measuring a monstrous 60mm wider per side up front and 50mm per side at the rear, giving this 2002 a stance far beyond its diminutive dimensions.
The brakes have also been comprehensively upgraded, with four-pot Wilwood calipers mounted on custom carriers up front with 260mm drilled and vented discs along with E21 323i hubs, while at the rear you’ll find Mk3 Golf rear calipers matched to Mk1 Golf front discs while Hel braided brake lines have been fitted throughout. You might think that all that brake work seems like overkill for a 2002 but you see it isn’t, because there’s something a bit special going on under the bonnet.
“I always knew I was going to do an engine swap,” Josh tells us, and what he’s done is taken a low-revving, M20B27 eta engine from BMW’s 325e and 525e models, designed for efficiency, and comprehensively reworked it to better suit his performance-driven needs. Sitting on custom engine mounts, the once-docile 2.7 has been transformed with a 325i top end, M21 forged crank, forged, reground stage one cam, Alpina B3 2.7 chip, a honed intake manifold, 185cc injectors and Magnecor ignition leads. He’s also fitted an M50B25 radiator and added a custom six-branch exhaust manifold that connects up to a custom 2.5” exhaust with twin pipes. It’s an impressive list of mods and it makes for some impressive numbers, with the 2.7 now pushing out 240hp thanks to Josh’s handiwork, which makes this 2002 a real road rocket. Naturally the transmission required a bit of work to make sure it was up to the task of dealing with the 2.7’s grunt and Josh was more than happy to get his hands dirty. “The gearbox itself is a Getrag 260 Sport five-speed on custom mounts with a stage one clutch and I’ve also fitted a 3.64 small case LSD from an E21 with custom-drilled output flanges.”
The exterior might, at first glance, appear to be a mess to some but there’s a lot more going on here than first meets the eye. The arches steal the show but there’s also a custom front lip and a custom drag spoiler, custom bash bars and a back-dated rear panel that allowed Josh to fit the arguably much cooler round rear lights. One of our favourite parts of the exterior work, though, is the quick-release front clip, that allows for the entire front end to be removed in a matter of minutes. While it’s designed to allow easy access to the engine for mods and maintenance, seeing a car driving around with no front end is pretty cool. With a race car-inspired exterior you’d expect the theme to carry on inside the car, and you’re not going to be disappointed here. “This car was originally a Lux model,” explains Josh, “so it had a nice, powder blue interior though when I bought the car it was smelly and had started to rot, but I always knew that I was going to strip the interior, I just wanted to have the bare essentials to have the car running,” and he’s certainly stuck to that philosophy. About the only part of the interior that is still recognisable is the ’02 dashboard and instrument cluster but beyond that it’s all change. There’s a big convex Longacre rear-view mirror, single Cobra Sebring Pro seat with a TRS four-point harness, a Momo Model 69 suede steering wheel and a custom switch panel, custom pedal box and there’s also a hydraulic handbrake and a custom dual fulcrum short shifter. “I wanted to feel like I was in a Touring car,” explains Josh, “so I wanted the wheel high and close and a tall gearlever close to the wheel. The cage is actually a historic-spec one for the ’02 that I bought and then modified to make it stronger,” explains Josh. “It just bolts in but I want to make a new cage for it, eight-to-ten point, fully welded-in, which is one of my next big plans.” Meanwhile, in the boot you’ll find a 30-litre aluminium fuel tank with a surge tank, which is fed by one of the two Bosch 044 fuel pumps, the other feeding the engine.
As much work as has gone into this car over the past three years, it’s only the beginning of what is going to be a much longer journey and Josh’s plans for the car are numerous and substantial. “I want to do a front-mid-engine conversion,” he says matter-of-factly, “I’ve come this far so I might as well keep going,” he laughs, but that’s just scratching the surface. “I’m currently working on a secret E30 project and that’s going to pave the way for the 2002. I want to make the car more useable and more reliable, but no less crazy,” he grins. “I want to iron out the bugs, modernise the underpinnings to make it more enjoyable; for example, currently if I’m taking it to a show and it’s too far, I will trailer it, which takes away from the experience and I want to be able to drive it everywhere.” All this work isn’t just for Josh’s amusement, though, it’s for the benefit of his company, Under Development Motorsport, and some of what he’s made will be for sale there, like his short shift kit. “It’s billet and should fit everything from E21s to E9x models,” he says.
This 2002 is really an automotive expression of sheer joy and you can feel how much love and enthusiasm Josh has for this car when you talk to him about it. “It’s great to drive something that gets so much attention and that you genuinely built yourself, it’s just a great feeling,” he says with a smile. We can’t wait to see where he takes the ’02 and judging by what he’s achieved here so far, that E30 is going to be something really special too…
TECHNICAL DATA FILE #Wide-body 2.7 #BMW-2002 / #Alpina-B3 / #Alpina / #BMW-2002-Wide-body / #BMW-2002-Alpina / #BMW-2002-Alpina-2.7 / #7Twenty / #BMW-2002-E10 / #BMW-E10 / #BMW / #BMW-2002-Alpina-E10
ENGINE 2.7-litre straight-six #M20B27 eta / #BMW-M20 / #M20 / #M20B27ETA , M21 forged crankshaft, stage one cam, #Alpina-B3-2.7-chip , #K&N cone filter, honed intake manifold, #Magnecor ignition leads, custom engine mounts, 185cc injectors, custom stainless six-branch exhaust manifold, custom 2.5” exhaust with twin blast pipes, fully silicone-hosed cooling system, M50B25 radiator
TRANSMISSION #Getrag-260 / #Getrag five-speed manual gearbox, stage one clutch, custom gearbox mounts, E21 3.64 small case #LSD with custom-drilled output flanges
CHASSIS 9x15” ET0 (front and rear) #7Twenty-Style44 wheels in matt bronze with 215/45 (front and rear) Toyo TR1 tyres, #GAZ-GHA coilovers with adjustable top mounts, #GAZ front camber plates, front and rear strut towers raised 40mm, custom front anti-roll bar relocation and drop links, fully poly bushed and reinforced front and rear subframes, custom rear subframe camber and toe adjustment plates, custom gearbox and exhaust tunnels, reinforced sills and various other chassis bracing throughout, rear strut tower brace, Wilwood four-pot calipers and custom carriers with 260mm drilled and vented discs and E21 323i hubs (front), Mk1 Golf front discs with Mk3 Golf rear calipers and custom caliper carriers (rear), Hel braided brake lines (front and rear)
EXTERIOR Custom metal wide arches, custom front lip, bash bars, custom drag spoiler, custom racing livery, back-dated rear panel work to allow for round rear lights and fuel filler cap delete, custom quick release front clip for fast removal of front-end
INTERIOR #Cobra-Sebring-Pro seat, TRS four-point harness, #Driftworks quick release hub, #Momo model 69 suede steering wheel, custom dual fulcrum short shift, hydraulic handbrake, custom pedal box, sixpoint bolt-in cage, custom switch panel, 30-litre aluminium race tank in boot with surge tank and twin #Bosch-044 fuel pumps
THANKS Graham, Nicola and Hannah for all the support! All the @76build Instagram followers, all the other people showing love for the 02 and last but not least Thierry and Lewis at www.7twenty.co.uk. Cheers guys.
“From top to bottom, inside and out, everything you see before you has been crafted by Josh’s own two hands”Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationDUE DILIGENCE Stunning super-rare E21 323i / #JPS / #BMW-E21 / #BMW-323i / #BMW-323i-E21 / #BMW-3-Series / #BMW-3-Series-E21 / #BMW-323i-JPS / #BMW-323i-JPS-E21 / #Getrag / #Getrag-245 / #M20B27 / #BMW-M20 / #M20 / #BMW /
Due Diligence The story of one man’s love affair with JPS BMWs and in particular his stunning E21 323i example. Hard work, combined with a bit of luck, can take you a long way. In Australian Stewart Garmey’s case, it took him around the world as he helped other BMW enthusiasts, and also led him to possibly one of the rarest limited edition BMWs made. Words and photography: Chris Nicholls.
It takes a unique level of dedication to spend a quarter of a century committed to a brand. And not just committed for your own purposes, but working tirelessly to help fellow enthusiasts enjoy their BMWs, wherever in the world they may be. That’s the kind of dedication Australian, Stewart Garmey has, though. A BMW fan since 1977, when a friend let him drive his then-new 2002 in New Zealand, Stewart finally got his own ‘02 in 1989 (a Taiga green Tii) after his mother passed away. “I always promised myself a 2002, and when my mum passed away in 1989, she left me a small inheritance. My wife said my mum had always promised me a BMW, so I better go and do it!”
Having taken the plunge, he undertook a bare metal restoration of the car and also joined the BMW Club of Victoria, spending the next 25 years attending club meets, participating in show ’n’ shines and organising things. From 1997-2001 he worked as club president, eventually joining the board of BMW Clubs Australia, and in 2004 he even became the Australian delegate to the International Council of BMW Clubs – a position he held for the next ten years. In 2015, in recognition of all his hard work, Stewart received the ‘Friend of the Marque’ accolade, becoming only the 48th council member to be awarded it, and the sixth Australian. It’s something he is justifiably proud of, saying it was like “getting the Brownlow” (the Aussie Rules equivalent of the PFA Player’s Player of the Year award).
Of course, just owning a BMW (no matter how nicely restored) and working hard for club members worldwide was probably not going to get him Friend of the Marque, but Stewart proved his love for the brand over many years with further acquisitions. There was an immaculate Henna red South African-built E28 M5 we featured in our October 2014 issue that was so spectacular Stewart even received an offer for it from Ralf Rodepeter at the BMW Museum (a sale that only fell through because BMW claimed it would have trouble insuring the RHD car in Germany). He’s also owned a JPS 323i that he sold a while back, and he currently has a E92 325i Coupé and E91 323i Motorsport Touring he and his wife use as their current daily drivers respectively. Oh, and because clearly he hasn’t done enough for BMW as it is, Stewart runs a register of JPS BMWs (both the Australian factory race cars and road-going special editions made to order in Australia to commemorate them) in his spare time, as no factory records are thought to exist now.
Now, for those who may not know, here’s a little more information on these Australian-only specials… Covering many different models, they were commissioned by BMW Australia to cash-in on the Team JPS BMW Group 5 and Group A cars of the ’80s. Available only by request, each one came with gold-centred BBS-Mahle wheels, rib-back Recaro seats, an M1 steering wheel, #JPS badges, a build numberplate and the signature black-with-gold-pinstripe livery. According to Stewart’s research, there was only one E12 sold, 100 E21s, perhaps only four or five E24s, just two E28s (one each for JPS team boss #Frank-Gardner and lead driver Jim Richards), and around 30 E30s. Stewart believes only about 15 E30s, 20 E21s, one E28 and an unknown number of the rest survive today, making them very rare beasts.
It’s thanks to this research and subsequent knowledge of these JPS cars that Stewart was quickly able to discover that his second E21 323i example might be one of the rarest of them all – a 2.7-litre special order version, not fitted with the lazy M20B27 used in other factory BMWs over the years, but a stroker built locally using the 2.3-litre block and fitted with new crankshaft and rods, giving it a totally different character to the factory motor, as well as more power. “We’ve had people look at it and play with it, and almost beyond doubt now, it is one of the three [known] 2.7-litre strokers,” he says. “The fact it’s got the close-ratio 245 dog-leg Getrag and #LSD behind it suggests that it is the big engine. It certainly goes like it is, and when you hear it idle, it’s very cammy and lumpy.”
Having heard the car during the shoot, that’s something we can definitely confirm. And with Stewart revealing one of the three 2.7s was written off in a crash a while back, that makes his – number 47 of the 100 E21s, according to the dash-mounted build plate – possibly one of two.
The rather amusing thing is that, while Stewart’s hard work was responsible for him discovering how rare this car might be, it was just dumb luck that led him to it in the first place. Having sold off his other toys due to the need to downsize his house, he was apparently experiencing “withdrawal symptoms”, and decided to start looking around to see what was available. Lo and behold, this little example appeared on his radar, although it was, by Stewart’s reckoning, rather overpriced at first.
“I saw it advertised for $27,000, rang the bloke and told him he was dreaming. He replied that that was what the car owed him, to which I retorted that what it owes him and what it’s worth are two very different stories indeed! However, I watched it for nine months, and kept in touch. Then one day he asked me what it was worth, which was $10-12,000 tops. After a bit of soul-searching he finally told me he wouldn’t take less than $10,000 for it and I told him I’d see him on Saturday morning! So I flew up to Brisbane, saw it and bought it.”
Obviously neither Stewart nor the previous owner knew at the time that it was likely a 2.7, so clearly Stewart ended up with a bit of a bargain, although its imperfect mechanical condition meant he had to spend quite a lot of time and money ensuring it was back to its former glory. Perhaps oddly, Stewart revealed it didn’t seem too bad on his initial test drive, but once he got it trucked back to Melbourne (a wise decision in retrospect), the full extent of the issues revealed themselves.
“I drove it while I was there and I was impressed by the way it went, but after 2000 kilometres in a car that hadn’t done a lot of work for a while (it had been a sit-around toy) combined with the fact I didn’t know it… it was too far, so I paid for it to come back to my house on a truck. Which is just as well that I did, as it had things like the exhaust system [being] held on with pull-up ties. It was also missing bits in the front suspension and the brake sensors weren’t fitted… silly little bits like that, so it was a good move.”
This all happened back in July last year, and Stewart’s spent all the time until now fixing it up. That meant, on top of sorting the aforementioned urgent issues, Stewart had to replace many items in the engine bay, such as the strut-top caps, as well as order custom-made JPS C-pillar badges as they were missing. To match his high standards, he also had to get all five original wheels restored, replace all four headlight lenses, remove an additional gold pin-stripe that wasn’t meant to be there, put in a new dashboard, get the M1 wheel retrimmed and recover the unique Recaro seats.
This last job proved quite the challenge, as the black side bolster fabric he needed was only used on those seats in period and was no longer in production. However, here again Stewart’s nouse and hard work paid off as many phone calls later, he eventually found out via a Sydney shop that the same material, albeit in green, was used on Holden Commodore SLEs at the time, and due to the Commodore’s enduring popularity, Stewart easily found the fabric and had it dyed black. After getting them done by his friend Ray at Bray Mills Automotive Trimming in Heidelberg in Melbourne’s north east, Stewart says the seat material “worked beautifully”.
Amazingly, despite how good the car looks now as a result of all this work, Stewart’s not done yet. At the time of the shoot, he’d just ordered a new headliner from America as the original one had rust stains in it, and the carpets were nowhere near his usual standards, so he was going to replace those, too.
Indeed, as you might have gathered, Stewart is pretty meticulous about his cars in general. His 2002 and M5 won so many BMW Club of Victoria concours events other members complained there was no point entering their cars – to which he responded “I’m not going to back down – if somebody beats me, they beat me, fair enough, but I’m not going to roll over.”
He also never allows anyone other than he and his wife to sit in his toys with regular outdoor shoes on, and even he and his wife dust their shoes off before getting in. When it came to detailing this car, he says: “It lived up on wheel stands for about three months because I was detailing under the guards.” He also detailed the suspension while he was there and, because it had aftermarket stainless mufflers fitted by a previous owner, Stewart polished those up, too.
All this graft is, perhaps, more evidence that effort, combined with luck, can indeed net you amazing results. As you can see, even in the car’s supposedly incomplete state, it’s a stunner. The sheer gloss Stewart’s managed to achieve with the original paint, and the near flawless finish on the (unfinished) interior all point to how much effort’s gone into it.
Refreshingly, as you can see by the fact he was happy to get the car shot on a dirt road, Stewart isn’t overly precious about using it, either. He plans on taking it out regularly for club events and while there will, no doubt, be times when he’s too busy polishing it to make every meet, he always makes as much of an effort as he can. Because clearly, the rewards are worth it.
“The fact it’s got the close-ratio 245 dog-leg Getrag and LSD behind it suggests that it is the big engine. It certainly goes like it is”
=Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationGENERATION GAME / #BMW-M535i / #BMW-M535i-E28 / #BMW-M535i-Eaton-supercharged-E28 / #BMW-M535i-Rotrex-supercharged-E28 / #BMW-E28 / #BMW /
The UK’s only supercharged E28s are an impressively eclectic pair owned by an equally different father and son duo with a long-standing love of BMWs.
SUPERCHARGED UK E28s Classic Fives with power!
Owning the only two supercharged E28s in the UK, this father and son duo are the custodians of some seriously cool metal. Words: Elizabeth de Latour. Photos: Matt Woods.
BMW E28s are precious things. Long gone are the days when you could pick one up for £400 (like I once did) and with the vast majority of the shabby ones now having rusted away, those that remain need to be cherished. Whilst the E24 6 Series might be the obvious choice for those looking for something sleek and ‘sharky’ to slam, the E28 is currently getting lots of love, too. Last year no less than three bigpower classic Fives appeared in DRIVE-MY and there are plenty of extremely attractive examples around, like this pair, for example.
Kris Rourke and dad Jon are the custodians of this unlikely pair – one an exceptionally clean sleeper, the other more of a retro hot rod, with the two cars reflecting their owners’ personalities and motoring preferences.
The very clean red car belongs to Jon, with Kris driving the brown bad boy. While both cars are without doubt very different, they share one significant similarity: they are both supercharged. That elevates this pair from being merely modified to really rather special, not least because of how rare a thing a supercharged E28 is.
That father and son own E28s is unsurprising when you learn that Jon has been at it for years, which means Kris was destined to follow. “Dad’s always had BMWs and has had about six or seven E28s,” says Kris. “They were always in my life when I was growing up and my first car was a 2002ti, mum and dad’s 2002 in fact, which they gave me when I passed my test. It all started from there really. I’m also into Jap stuff and have had loads of J-tin, all modified and all with big power.” So the draw of another powerful, modified car was inevitable and the odds of it being a BMW were good.
Pay attention, because things get a bit complicated now. “Two years ago I had a Fiat Cinquecento and loved it but then my other half and I had a baby and I couldn’t get the baby seat in the car so it had to go. Dad had a blue M535i at the time so he gave me that as it was more practical and bought himself the red supercharged car. I then sold the blue one to buy dad’s red one, which is now my brown one, and when I started modding that dad realised he missed it and bought himself the red supercharged one he now owns.” Got it? Good.
For Jon, a London cabbie by trade, the appeal of the E28 is easy to see. “It’s a lovely retro classic car,” he says. “It stands out and it has road presence. All my previous E28s have been standard – as long as they go and work I’m happy,” he chuckles. “This red one is much more of a hooligan car, though. I was just looking around on eBay for interesting cars, spotted it and went for it. It had been in a garage for about seven or eight years and while the body was good, underneath it was rotten,” he says.
Not that you’d have any clue as to the car’s previous state of disrepair now thanks to the amount of time and money that Jon has invested in it. The whole floor has been repaired, as have the sills, while the suspension has been renewed and new brakes have been fitted. Jon also replaced the chrome exterior trim with Shadowline, while inside the original cloth seats have been replaced with leather Sport seats. Thankfully having a rust-free body meant one less area that needed attention and the red colour really looks fantastic on the E28. So too do the 17” Style 5s – easily one of the greatest wheel collaborations between #BBS and #BMW .
Of course, what’s really exciting here, on both these cars, is what’s under the bonnet, and these are the only two supercharged E28s in the UK. Jon’s car has the slightly more stock-looking engine bay, though there’s no missing the supercharger and its accompanying pipework. The kit here is a Jamsport setup, which cost whichever previous owner that decided to fit it a cool £6500, and uses a more traditional centrifugal supercharger.
This E28 may be no spring chicken but you can still appreciate the work that has gone into fabricating the pipework for the kit. It’s all expertly finished and assembled and there’s a lot of engineering squeezed into here. The most impressive part of this setup is the custom alloy rad, intercooler and associated pipework, which originally cost an eye-watering £5000 and comes courtesy of McLaren (hence the price tag and quality of the work itself). The FMIC is tucked behind the kidney grilles and ahead of the rad. On top of that sits an oil cooler for the supercharger, as this older design requires an external feed. It’s not for show, either, with Jon telling us that running at around 6-7psi it’s making 303whp, which is an awful lot of power in a car as light as the E28 and definitely makes it a bit of a handful. Not that he’s complaining, mind, he’s loved every minute of the 18 months he’s spent with the E28 – a long time for him as he likes to change his cars often.
And so we come to the brown E28, Kris’s rowdy, raucous, unashamedly showy counterpart to his dad’s more demure example. Kris was fortunate in that his E28 was in a better state, though as it had come from his dad that’s not much of a surprise. A quick glance at the exterior of the E28 is enough to tell you that there’s clearly something going on here. There’s a sort of rough-edged charm to the whole car, visible in the interior with its auxiliary gauges mounted on a bright red backing plate and that well-used Nardi steering wheel. Where the engine bay of the red E28 is a relatively discreet affair, on the brown car it’s much more of a mad scientist affair. What you’re looking at here is an extremely impressive home brew positive displacement supercharger setup.
In case you don’t know, a centrifugal supercharger produces more boost as engine speed increases, normally producing peak boost very near to the engine’s redline and where it would normally be producing peak power in naturally aspirated form. A positive displacement blower, like a Roots or twin-screw item, on the other hand, produces peak boost instantly, meaning you get massive low-end torque and immediate response from the engine when you put your foot down, making for awesome mid-range thump. Positive displacement superchargers are also a lot more complicated to fit.
Generally speaking they are large, bulky items that are traditionally mounted directly on a custom inlet manifold, feeding air into the engine via a chargecooler. In contrast, centrifugal superchargers are smaller and run cooler, so they can happily operate without any sort of intercooling. The fact that Kris’s car is running a positive displacement blower, an Eaton M90 to be precise, and a home-made installation at that, is very impressive.
Of course, the fact that it’s a homebrewed setup means that it wasn’t perhaps running as best as it could have been when Kris took over custody of the car. “I’ve improved a lot of things since I bought this E28,” he says. “It had no management for starters and was just running a fuel pressure regulator, so I fitted a Megasquirt ECU and had the cam blueprinted. I changed every boost hose and pipe and replaced the FMIC with a chargecooler.” This is that big metal box on the front left of the engine bay. It cools the intake air by passing it through a core filled with water, which is itself passed through and cooled by a heat exchanger mounted at the front of the engine bay, hidden beneath a clever lift-off panel. “This saw intake temperatures drop from 90ºC to 40ºC,” says Kris, “and I’m planning on adding methanol injection, which should bring them down to about 20ºC and help the engine make more power.”
The rather industrial-looking pipework under the bonnet is a bit of a maze but it all begins at the air filter which is shrouded in carbon and fed with cooling air via the hole in the front grille where the passenger-side high beam unit would normally sit. The air travels through the black flexi-pipe and into the supercharger inlet, then up through the outlet on top, round the back of the engine bay and into the chargecooler, through the core, and then into the original inlet manifold on top of the engine. The fact that the E28’s engine bay is quite capacious and allows for the supercharger to be mounted by the side of the engine and to feed into the original inlet manifold is a bonus. There’s a lot more beneath the bonnet beyond the supercharger, though, including a B35 Stage 3 head with bigger valves, a Schrick 296 cam and a Fritz’s Bitz exhaust manifold.
It’s a monstrously impressive installation but how does it perform? According to Kris, the car made 252whp, which is definitely enough to be getting on with, but also an amazing 350lb ft of torque at just 1800rpm, which is the beauty of a positive displacement blower. When Kris had nitrous on the car it ran an 11.8-second quarter-mile, which is extremely impressive and puts it in the company of cars like the Jaguar XJ220, Audi R8 V10 and Aston Martin V12 Vantage S.
“I took the nitrous off as I knew I would never really use it,” he continues. “I was too scared of blowing the engine up… but I might put it back on. I really want 400hp and the supercharger is holding the car back – it’s not making as much boost as it should and I need to run more boost to make more power.
I’m considering my options. I might rebuild the supercharger or I might go for a turbo conversion. It’s quite a lot of money but it would definitely mean I could hit 400hp. And I like the idea of having a turbo. I have 90% of the parts I need, so I’m almost ready.”
Of course, we can’t discuss Kris’s car without discussing its colour. It’s not paint or a wrap but is, in fact, Plasti Dip – the spray-on, peel-off rubbery coating that can provide a quick and easy way to change the colour of your car and then change it back again when you get bored! “I was approached by DipMyVehicle, who offered to dip my car for free in exchange for having it on the company’s stand at the Santa Pod show, so I went for it,” Kris explains. The colour is called Sunset bronze. Although it may look pretty brown when the light hits it there’s a subtle change in colour and you can see a light metallic element in the coating. Combined with the aggressive drop on Spax springs and black, 19” CSL-wheels it makes this E28 into a bit of a bad boy.
The brakes have also been uprated, with E34 540i discs and calipers front and rear running Mintex pads, while the gearbox is a 260/6 unit running the ratios from the E28 dog-leg transmission with a separate bellhousing, Black Diamond Stage 3 clutch, and modified centre donut on the propshaft.
Both cars have had a vast amount of time and effort devoted to them – Jon’s car on the bodywork and Kris’s on the mechanicals – but the results speak for themselves. E28s need love and attention so we’re delighted that this father and son team stepped up to the plate.
It’s a lovely retro classic car. It stands out and has road presence.
DATA FILE Eaton supercharged E28 M535i
3.4-litre straight-six #M30B34 , compression ratio lowered to 8.1:1, #B35 Stage 3 head with 1mm bigger valves, #Schrick 296 cam, B35 inlet manifold, 550cc injectors, #Sytec FPR, #Bosch-044 fuel pump, 8-micron fuel filter, CDA carbon air box with cold air feed, custom crank pulley, #Eaton-M90 supercharger, ported top hat, custom charge cooler system, #Brownlow alloy radiator, Fritz’s Bits heat wrapped manifold and full system, #Megasquirt ECU running MS2. 252whp, 350lb ft wtq
/ #Getrag-260/6 gearbox with separate bellhousing, #Black-Diamond-Stage-3 clutch, modified centre donut on propshaft, factory #LSD / #Getrag-260
8.5x19” (front) and 9.5x19” (rear) M3 CSL wheels with 225/40 (front) and 245/35 (rear) Bridgestone tyres, #Bilstein gas dampers all-round, #Spax lowering springs, polyurethane front torque arm bushes, E34 540i discs and floating calipers front and rear, #Mintex racing pads all-round
Plasti Dipped in Sunset bronze over original #Zinnobar red, driver’s-side high beam removed for cold air feed, clear front and rear indicator lenses
Standard E28 M535i leather, three-spoke Nardi leather steering wheel, M5 gear knob, Innovative wideband #AFR gauge and boost gauge in centre pod
Paul Higgs, Ed at Fusion Motorsport and Justin from dipmyvehicle.com
DATA FILE Rotrex supercharged E28 M535i
3.4-litre straight-six #M30B34 / #M30 / #BMW-M30 , #Rotrex supercharger, custom alloy radiator and intercooler system, 440cc injectors, #Gotech-Pro-X-ECU with custom wiring loom, #Ram air filter, Fritz’s Bits manifold and exhaust system. 303whp @ 7psi
Standard M535i dog-leg ’box, standard factory LSD
8.5x17” (front) and 9.5x17” (rear) #BBS-RC090 Style 5 wheels with 225/40 (front) and 245/40 (rear) tyres, #Bilstein dampers, uprated lowering springs, front and rear strut braces, #Black-Diamond drilled and grooved discs, EBC Redstuff pads
Zinnobar red, dechromed, clear front indicator lenses,
Standard M535i leather seats
Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationThe Last Emperor
A look back on the legendary #BMW-Z4M-Coupé , the last of the naturally aspirated six-cylinder M cars. Emperor The last. If you follow the mantra that M cars should come with a naturally aspirated screaming straight-six then the Z4 M Coupé represents the last of the breed… fortunately it’s rather good, too Words: Bob Harper Photography: Steve Hall
It feels slightly odd to find myself for the second time this month writing about a car that I haven’t universally heaped praise upon in the past. Yup, the Z4 M Coupé has not always been on my list of ultra-desirable BMWs and I even remember it being the subject of a very heated argument in the office when we were selecting the cars for our Car of the Year test at the tail-end of 2006. I favoured the ‘M-lite’ 3.0si model whereas everyone else in the office thought the M Coupé should be on the short list. In all honesty I think the 3.0si is the better all-round car, certainly from the prospect of using it as a daily driver as it offers virtually the same performance as the M car, significantly better economy, a more compliant ride and much lower running costs all wrapped up in a similarly visually arresting package.
However, while that was my view then – and still is if you want to use a Z4 Coupé everyday – these days the M Coupé is starting to be appreciated for what it is: a mad, bad and brawny hot shoe – the last in the line of naturally-aspirated M cars that can trace its parentage all the way back to the original M1. Increasingly they’re becoming squirreled away as weekend cars, something to cherish and polish and then, when the mood takes you, to excite and exhilarate on an early morning cross-country dash that will have you grinning from ear to ear. The Z4 M is blistering quick – and still feels it – but it takes a strong and fully committed hand to fully tame it. To drive one quickly requires your full attention. Give it that and it’ll be hugely rewarding.
Under the M Coupé’s shapely bonnet was the last resting place for the venerable S54 straight-six, itself a development of the S50 ‘six that first saw the light of day in the E36 M3. It was a car that #BMW claimed would never be built when the E85 generation of Z4 was created, claiming that the new Roadster was so torsionally stiff that a coupé wasn’t needed and that the regular 3.0i Z4 was so quick that there was no need for an M version. Fast forward a few years and the Z4 Concept Coupé was shown at the 2005 Frankfurt Motor Show and when we questioned one of BMW’s press bods at the time he more or less said, ‘if a BMW Concept has towing eye-covers, it’s production-ready.’ Then it was just a matter of time before the production version appeared, and at the Geneva Motor Show in 2006 the fully-fledged cars were shown for the first time with serial production starting just a month later. It wasn’t a particularly longlived M car, though, as just over two-years later it had disappeared just as quickly as it had arrived and the E85/6 generation of Zed was replaced by the less driver-focused E89 with its fancy folding metal roof, effectively killing the need for a coupé version. Of course, BMW M had form for making slightly crazy Zed cars by the time the Z4 appeared on the scene and despite the fact that the Z3 Ms were fairly deeply flawed pieces of kit they had a big following and their shortcomings could easily be overlooked thanks to their brawny characters. Quite why BMW changed its mind and decided to eventually offer the M versions isn’t fully known but perhaps the top brass wanted to have one last try to knock the Boxster off its perch, or perhaps the Zed Ms were seen as a useful way of filling the gap between the departure of the E46 M3 and the arrival of the E92 version. The Z4 Ms ensured BMW still had a presence in this section of the market, albeit with a less practical twoseater but we can’t really see it as being a fully commercial decision as with less than 5000 cars built in just over two years it’s likely the car didn’t recoup its development costs.
Knowing that the Z4 M was effectively going to be a limited production machine BMW could perhaps have been forgiven if it had scrimped slightly on its specification but by now we should know that M doesn’t generally do things by halves so the Z4 M Coupé was a fully-fettled M car. The engine was lifted directly from the E46 M3 and while it’s a familiar unit it should be remembered that it’s still an absolute peach. Double Vanos, an 11.5:1 compression ratio, individual throttle butterflies and an advanced engine management system ensured a high specific output and even today a normally aspirated engine that develops nearly 106hp per litre is something to write home about. Even within BMW M’s hallowed halls this is an outstanding achievement and betters the specific output of the later S65 V8 from the E9x M3 (including the GTS’s 4.4-litre) and even the E60 M5’s mighty S85 V10.
Unlike in the E46 M3, the straight-six was mated to a #ZF transmission (the E46 used a Getrag unit) and the six-speed manual was the only option for the Z4; none of your fancy #SMG gubbins here thank you very much. Naturally enough for an M car there was a limited-slip differential, BMW’s M Differential Lock, which despite being a fully mechanical item uses pressurised viscous silicon fluid to operate a multi- disc clutch to direct power to the wheel with the greatest traction. It also featured the latest version of BMW’s #DSC traction control system along with the most up-to-date version of Dynamic Brake Control which added items such as brake fade compensation, brake standby, brake drying and hill-start assistant.
While the Z4 Ms used the same basic suspension setup as the regular production Z4 it was fine-honed by M to try to bring the best out of the car. Without a doubt the biggest change was the adoption of hydraulic power steering, as the electric setup of the normal Z4 was deemed not feelsome enough for an M car. The majority of the Z4 M’s setup was lifted more or less directly from the E46 M3 CS and it had an overall ratio of 14:5:1 which, interestingly, made it more direct than the rack that was fitted to the Roadster version of the Z4 M.
The rest of the M’s underpinnings were also beefed-up and while it still retained the basic MacPherson strut/multi-link setup of the Z4 it had a wider front and rear track, revised lower front arms and steering knuckles bolted directly to the front struts. Spring and shock absorber rates were unique to the car (and slightly stiffer than those fitted to the M Roadster) while anti-roll bars had larger diameters at 27mm and 22.5mm, front and rear respectively. At the rear there was a more heavy-duty rear subframe required to accommodate the larger M diff and there were also enhanced wheel bearings and reworked longitudinal links in the rear suspension.
That the Z4 M was going to go well was a given – it was, after all, nigh on 100kg lighter than the E46 M3 – so to ensure it stopped equally well M equipped it with the braking setup from the E46 M3 CSL with 345x28mm vented and drilled front discs and 328x28mm rears that were gripped by single piston swing callipers all-round.
Naturally enough there were exterior changes to the Z4 M and as we sit waiting for the sun to set for our cover image there’s plenty of time to take these in and while it’s perhaps not quite as outrageously distinctive as the Z3 M Coupé the Z4 version is still a stunning-looking piece of design. The beefed-up front and rear bumpers with their various cut outs and grilles for air intakes and exhausts add some much needed visual drama to the shape. The wide rear haunches seem to work particularly well with the sweeping rear hatch and with the exhaust pushed further out to the edges than in most other M cars it gives the rear end a feeling of real width and presence. The ‘Zorro’ slash in the front wings with the BMW roundels hiding the indicator side repeaters in the centre catch the dropping sun and create areas of light and dark – there always seems to be a little something extra to the shape that you’ve not seen before. Altogether it combines to create a machine that if I owned it I’d definitely have a sneaky glance over my shoulder at as I walked away after a spirited drive as the sound of hot metal ticking away to itself reminded me of the fun we’d just had.
Slipping into the cockpit reminds me of just how low these cars are and while the cabin is slightly on the snug side everything you could want falls nicely to hand. The leather-clad and M-logo’d gear knob is just a hand span away from the steering wheel, and while the latter item is nice to hold it’s perhaps not the most visually appealing item ever fitted to an M car. Instrumentation is minimal as per the standard Z4 but there’s the rev counter with illuminated segments that remind you not to thrash it from cold and an oil temperature gauge tucked away by the fuel gauge and the car’s performance potential is made clear by an 180mph speedo.
Where the Z4 M really scores over the 3.0si, though, is in the sense of occasion – a palpable sense of drama when you slip behind the wheel. There’s that dramatic view down the heavily sculpted bonnet (that the 3.0si didn’t get), and once you twist the key the straight-six sends tingles up your spine and gets the hair standing up on the back of your neck. To experience a fully wound-up S54 ‘six is a aural treat and you feel that you’re genuinely a witness to something special, and let’s not forget that it’s not something we’re expecting will be available for a long time to come with all the manufacturers following the turbocharged eco-friendly route.
The engine dominates the driving experience and you can make very decent progress without wringing the car’s neck and those sampling the car for the first time can often be caught out by short-shifting up the gearbox and even if you use 5000rpm the Z4 will be travelling very rapidly but you’ll be missing out on the best part of another 3000rpm. Hit the Sport button that sharpens up throttle response still further and use the full extent of the rev range and you’ll feel like you’re sitting on top of a low-flying ballistic missile.
You sit so much lower than in an E46 M3 that the sensation of speed is much greater and that’s before you factor in that the Z4 M is actually a quicker machine, too. 0-62mph at 5.0 seconds is 0.2 seconds faster than the M3 and 50-75mph in fourth gear is despatched 0.3 seconds quicker in the Z4, too, while over the standing kilometre the Z4 is again halfa-second quicker. Small increments, perhaps, but coupled with the low-slung Z4 and it feels like more.
This is compounded by perhaps one of the less likable aspects of the Z4 M: its ride. It’s pretty uncompromising and an M3 is more compliant and this can ultimately temper your pace on roughly surfaced roads. On first acquaintance it’s easy to feel that the Z4 M is attempting to throw you off the road and a tendency to understeer on the standard fit ContiSportContact tyres didn’t help to endow you with confidence in the chassis, but with greater familiarity it becomes clear that you can lean on the Z4 M pretty hard and it will reward the confidence you show in it. It’s a car that requires real commitment to get the best out of. Sure it’s a little rough around the edges when it comes to ultimate handling finesse but get it right and it’s hugely rewarding.
A few choice changes can also make it a better steer, too. Ditching the original equipment tyres for something with more grip – later generations of Pilot Sport work well – help to counteract that initial understeer, and the addition of a front strut brace also helps here. As standard the Z4 is fitted with a clutch delay valve and this can combine with a slightly notchy ’box to make gear changes less than perfect, but deleting it or fitting a modified one can really smooth out a jerky gear change. Many owners have also fitted 19-inch CSL rims in place of the 18-inch M Double Spoke Style 224 rims and this really does work wonders for the look of the car. If money’s no object you could fit aftermarket suspension, but ultimately when these machines start to become really collectible it will be the standard examples that will be worth the most.
When it was new the Z4 M Coupé cost a not insignificant £41,285, just a smidgen less than an E46 M3, which made it seem quite expensive when the M3 was a far more practical and almost as quick proposition. However, by the time the Z4 was discontinued its price had only risen by £1000 yet the E92 M3 that was then available cost over £50k which conspired to make the #BMW-Z4M look like a bit of a bargain! These days prices start at around £13k for higher mile examples and rise to high £20s for really low mile examples being sold by franchised dealers.
The majority of cars fall in the mid-to-high teens bracket and represent excellent value for money. If you look after one and use it regularly but sparingly we don’t reckon you’re going to suffer much in the way of depreciation and if you hold onto it long enough you may well see values rise. Remember, only 1052 right-hand drive examples were built so rarity value certainly counts in their favour.
You could still use one every day if the fancy takes you, and bar the high cost of Inspection services there isn’t too much to worry about. The head gasket failures that afflict high mileage M3s are less of a problem with Z4 Ms as they were originally often purchased as a second car. However, I reckon you could become bored with its harsh ride, slightly cramped cockpit and brawny nature. Used sparingly, though, and every journey becomes an event, something to be looked forward to and savoured. It was the last of the line of great naturally-aspirated straight-six M cars and while it wasn’t perfect it’s still a marvellous machine to punt down a challenging bit of road. Nab one now before it’s too late.
Once you twist the key the straight-six sends tingles up your spine and gets the hair standing up on the back of your neck.
There’s a palpable sense of drama when you slip behind the wheel.
TECH DATA #2015 #BMW-Z4M-Coupé-E86 / #BMW-Z4M-E86 / #BMW-Z4-E86 / #BMW-Z4
ENGINE: #S54 / #S54B32 Straight-six, 24-valve, DOHC
MAX POWER: 343hp @ 7900rpm
MAX TORQUE: 269lb ft @ 4900rpm
0-62MPH: 5.0 seconds
STANDING KM: 23.7 seconds
50-75MPH (4th): 5.0 seconds
TOP SPEED: 155mph (limited)
WEIGHT (EU): 1495kg
TRANSMISSION: Six-speed manual, #LSD
STEERING: Rack and pinion
SUSPENSION: MacPherson struts (front), multi-link ‘Z’ axle (rear)
WHEELS: 8x18-inch (front), 9x18-inch (rear)
TYRES: 225/45 ZR18 & 255/40 ZR18
BRAKES: Single piston swing callipers front and rear gripping vented discs, 345x28mm (front) and 328x28mm (rear)
PRICE: £41,285 (2006)
Even today a normally aspirated engine that develops nearly 106hp per litre is something to write home about.
Stream item published successfully. Item will now be visible on your stream.