- Post is under moderationTALES OF THE UNEXPECTED Wild supercharged E90 M3
Karel Silha’s M3 has been evolving for a few years, getting ever madder and more frightening. As he teeters on the cusp of his next round of innovations, we pin down his green monster to see just how deeply this lunacy has spiraled… Words: Daniel Bevis. Photos: Patrik Karlsson.
840HP E90 M3 Supercharged wide-arch beast
The most fun cars are the ones that do surprising things; ones that subvert your expectations and lead your preconceptions down a hitherto uncharted path. We’re not talking about sleepers here – that’s a well-documented area, and a whole textbook in itself. No, what’s flicking our switch today is the idea of using a novel base to build something devastating. Like when Top Gear commissioned Lotus to build a trackslaying Lada, and the Norfolk spannertwiddlers ended up throwing £100k at it. Or when Volvo entered the BTCC in the 1990s with an 850 estate. These are not the logical cars to choose for such endeavours, which is what makes the whole concept so eminently desirable.
So it is with Karel Silha’s M3. He wanted to build an unstoppable and terrifying car with which to distort reality in the otherworldly and near-mythical amphitheatre of the now-world-renowned Gatebil events, so he chose to go with an M3. Fair play, sound reasoning, we can see why you’d do that But, just for the sake of waving two fingers at the rest of the paddock, he didn’t take the obvious route and buy himself an E92 coupé. He chose the sensible, dad-spec E90 fourdoor saloon.
Alright, we’ll immediately retract ‘sensible, dad-spec’, that’s a moronic way to describe a machine as formidable as the E90 – but you have to admit that the act of deliberately choosing a car with extra doors you know you’re never going to use is something only a belligerent and confrontational person would do. It’s Touring Car rules; you’ve got four doors so that people spectating can relate your car to their own salesman-spec diesel commuter. Karel’s just cranked things up a notch, simply to be mischievous. Oh, those effervescently zany Swedes…
“My first car was a Toyota Starlet,” he explains, which is actually something we hear a lot. A surprising number of skilled helmsmen cut their teeth in that balletic Japanese poppet, it must teach its drivers an awful lot about car control. “I’ve been working with BMWs for about 12 or 13 years now though. My first was an E30, which I wanted to turn into a bit of turbocharged weekend fun. Most of my BMWs have been E30s in fact; the most recent one was making 982hp and 887lb ft on an old M20 engine.”
It’s probably safe to assume that this fella knows what he’s doing when it comes to perving over BMWs then. However, the E90 is a world apart from the E30 (just look at the maths, it’s 60 #BMW Top Trump points adrift), so this little race car project was always going to be something of a challenge, right? No, not a bit of it. Karel’s the sort of chap who just knuckles down and gets on with it and there’s no half-measures here. Allin or nothing.
“I wanted to do fast lap times and the goal was to be quick,” he says, with hilarious modesty and masterful understatement. “With that in mind, there was only one chassis that was suitable for this: the E90 M3. So I bought the car from a friend – it was in really good condition, aside from the engine, which was trashed. One of the rods had found its way out…” But with the plans that Karel had made, a blown motor was an irrelevance. Stock engines aren’t Gatebil fodder. It was always the gameplan to tear the motor apart and beef everything up like Meat Loaf in an Angus Steakhouse.
“Yes, the whole build was fully mapped out from the start,” he assures us. “We even drew up 3D renderings of how it would look when it was finished. The plan was always clear.” Oh, and what a plan it was. With ruthless efficiency and the sort of clockwork dominance of the to-do list that you normally find in school staff rooms, Karel and his crew set about ripping the E90 to shreds and building it back up as an apex-humiliating, spectator-arousing beast.
“In the first year, we dealt with the chassis,” he says. “KW three-way competition suspension, and also a big brake upgrade from Endless, to get the chassis fully dialled-in. We’d initially talked to a local company about our suspension options, and the support was terrible, so we ended up talking to KW suspension in Germany. They answered all of our questions in one email and the support was just above and beyond, so it was a no-brainer to go with KW! They made a custom three-way competition kit for us, and those guys have been a strong partner ever since.”
With the chassis tested and thoroughly proven, the second year of the E90 build threw up some proper mischief. “In year two we did the forged engine,” says Karel, “and then we supercharged it – and this was no off-the-shelf kit, it was the biggest setup ESS could make for us. We ended up with 840hp, and we also upgraded the ECU to a full Motec setup, with PDM [Power Distribution Module], dash and ECU. We fitted a Samsonas sequential gearbox with paddleshift too.” Phew. Time to take a breath, drink in the magnificence of the spec, and just have a little think about our own life choices. Stick the kettle on for some pondering time, we’ll see you at the next paragraph.
Better? We know, it’s a lot to take in. But brace yourselves, as there’s a little more to come. You see, it would have been amusingly stealthy to jam all of this sweaty grunt into a stock-looking four-door shell, but stealth has never been the Swedish forced induction enthusiasts’ watchword. So what you’re seeing here is a searing vision in Snakeskin Green, a Dodge Viper colour no less, and to prove that this build isn’t just about dumb horsepower there’s a frankly staggering aero setup. Just look at the frickin’ size of that rear diffuser, for goodness’ sake! And the front splitter’s big enough to stand a family of six upon, let alone allowing them all to have a little nap on the rear wing. This thing may have enough horsepower to make a Bugatti owner think twice, but it’s also glued to the track by the crushing inevitability of downforce. It’s actually kinda frightening. Another hugely impressive element of this build is just how stock that S65 motor is, aside from the comically large blower. It’s got forged pistons and rods from Pure Performance Motorsport in Australia, and a suitably juiced-up fuelling system feeding through a Weldon 2345 pump (which is good for 1300hp!), but aside from that it’s pretty much as the M Division intended. Talk about over-engineering, eh?
Still, there was a global vibe developing in this Swedish-honed, German-built car with Australian engine upgrades and Japanese interior addenda, so it only made sense for the rolling stock to come from somewhere unexpected too. That’s why you’ll find a set of Work VS-XX wheels under those widened carbon fibre arches – custom-built wheels from Japan. And the rears are a spanking 12.5” wide, which allows for some seriously dirty contact patch. “We wanted a wheel that could match the rest of the car,” Karel reasons, “and Work Wheels were the only choice for a quality wide wheel.” Having hand-crafted his own bruising arches, we’ll happily take his word for that.
“Function over form was the overarching idea,” he continues. “The look has always been secondary to the act of going fast. The chassis’s actually being modified for a Version 3 that we’ll be debuting soon, but yes – the capability has always been more important than the look.” This statement, of course, writes a very large cheque, as the car looks absolutely phenomenal. Thankfully, we know that the setup can cash it with ease. “I’d say my favourite element of the build is all the carbon fibre,” Karel grins. “When you start with carbon, you kinda get the fever and it’s hard to stop! For 2017 most of the car will be in carbon fibre, and for 2018 a new chassis is being built with even more mods and 100% carbon.” Blimey. 100% is a big percentage. We’ll report back as the news filters in.
“It took some five-to-six months to build the first version of the car,” he says, “then it evolved over the off-season; 2015 Version 1, 2016 Version 2, and 2017 is Version 2.1. Just wait – 2018 will bring it up to Version Badass.” We can’t wait to see that. But for now, let’s just bask in the unutterable lunacy of Version 2.1 – the as-yet ultimate evolution of your neighbour’s four-door 3 Series, built to tear up Gatebil and atomise any rubber that may stray into its workshop. The fact that it’s not a coupé just makes the flawless victories all the sweeter. ¬
TECHNICAL DATA FILE #Supercharged / #BMW-E90 / #BMW-M3 / #BMW-M3-E90 / #BMW-M3-Supercharged / #BMW-M3-Supercharged-E90 / #BMW-3-Series / #BMW-3-Series-E90 / #BMW-3-Series-M3-E90 / #BMW-3-Series-M3 / #ESS-supercharger / #ESS / #BMW / #Work / #MoTeC-ECU
ENGINE AND TRANSMISSION 4.0-litre #V8 #S65B40 / #BMW-S65 / #S65 , fully-forged, custom #ESS-supercharger-kit , 1000cc injectors and uprated fuelling with #Weldon 2345 pump, #Motec engine management. #Samsonas six-speed sequential gearbox
CHASSIS 11x18” (front) and 12.5x18” (rear) #Work-VS-XX wheels with 305/35 (front) and 335/35 (rear) tyres, #KW three-way competition suspension, #Endless race brake setup with six-pot calipers (front and rear) with 355mm (front) and 345mm (rear) discs
EXTERIOR Dodge Viper Snakeskin Green, wide steel rear wings and plastic-welded M3 front wings – now remoulded in carbon fibre, Gatebil-sized custom wing, splitter and diffuser
INTERIOR Sparco seats, Takata harnesses, OMP steering wheel, custom cluster by Karel S Motorsport, paddle shifters, full painted FIA rollcage
THANKS All of my friends who helped, especially to Tim and Jens, and also all of my sponsors last year and also the new ones for 2017 – it would not have been possible without them
No air-ride here, just air jacks.
The rear view is dominated by that custom diffuser.
Fully-painted FIA roll-cage.
“Function over form was the overarching idea, the look has always been secondary to the act of going fast”
MOTEC engine management keeps things running right.
Sparco seats with Takata harnesses up front.
MoTeC C127 Race Display behind OMP steering wheel.
Custom ESS supercharger kit makes 840hp.
“In year two we did the forged engine and then we supercharged it [with] the biggest setup ESS could make for us. We ended up with 840hp”Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationFORCED INDUCTION FRENZY!
BOOST MODE #Stunning 610 whp turbocharged E36 M3 turns up the heat. Cars are meant to be driven and it was that realisation that took this E36 M3 from mild to wild.
JUNKIE BOOST Words: Elizabeth de Latour Photos: Patrick Lauder
Dean Yarza never intended for his E36 M3 to turn out this way. He’d always wanted one, that much he did know, and finally owning one was the fulfilment of a high school dream, even though it followed a modified E46 M3 ZCP. You might have thought that his former car would have been the keeper, the big one, because it was an E46 M3 after all, but life’s not always that straightforward. That Dean has been dreaming about owning an E36 M3 since his high school days is no surprise; this is a man who, briefly, owned a hand-me-down E21 323i as his first car and who admits to having been interested in BMWs since first being able to drive.
The Carbon black 2005 E46 M3 that he purchased in 2006 was where his BMW journey began proper, Dean having experimented with numerous vehicles prior to that. “I’ve basically modified everything I’ve owned since high school, giving in to the typical sickness the everyday car nut suffers from and I do not discriminate when it comes to the hobby,” he grins. This explains why his car ownership history includes an Acura Integra on nitrous, a couple of Saleen Mustangs and a Saleen Cobra, all of which ended up running over 500whp courtesy of aftermarket superchargers, a Ford F150 truck and even a couple of Yamaha R6 bikes. It’s a varied, colourful automotive past in which Dean has sampled all manner of modified machinery and that most certainly did not stop when the M3 entered his life. “I modified it with all the NA boltons including long tube exhaust manifolds, performance pulleys, air filter, 4.10 gearing and a performance tune. The exterior was also fitted with the full line of Vorsteiner VSL pieces – front bumper, rear deck lid and diffuser. 19” BBS LM rims and a Brembo GT brake kit were also installed,” completing what sounds like a thoroughly sexy and sorted M3. So why the switch from 46 to 36?
“After parting with my E46 M3, I yearned for another M and, more importantly, something to give me purpose, spending hours on forums researching and purchasing parts. At the time, it was the perfect platform to satisfy the need to handle, perform, and modify while being fairly painless to attain,” explains Dean though, in truth, the E36 did almost put the brakes on his modding addiction but, as we all know, you just can’t fight it…
“As many E36 owners know, it’s a bit tough to find them in a non-abused state in today’s market,” he says, and he’s not wrong. “After failing to find one to my liking for a few months, I put out a wanted add online and, amazingly, received a response for what was almost exactly what I was looking for. Prior to my search, I’d curbed my expectations, accepting the fact that these cars are close to 20 years old and I wasn’t going to find a gem. My initial want was just for a clean-titled, decent paint/interior M3 knowing that 90-110k miles would be the norm. What appeared in response to my add was a single-owner, excellent condition M3 with only around 33,000 miles, completely stock, still with the break-in instructions applied to the windscreen, as well as the original window sticker still in the glove compartment. It was far too pristine but in no way would be passed up.” That sounds like a once in a lifetime find to us and it would have been very silly of Dean to turn down the opportunity to own such an immaculate car, but it was the car’s virgin state and lack of miles that presented Dean with a bit of a quandary. “Prior to finding one with such low mileage, my plans were night and day from what the car is now,” he says.
“I initially only wanted something I could drive every day and everywhere, occasionally having weekend duty for spirited driving in the hills. To do this, I planned nothing more than a capable coilover set and a nice wheel and tyre combo. In a way, I just wanted a cool car I could really beat on and not care too much about,” but obviously that couldn’t happen now and a different approach to the whole ownership and modding outlook had to be taken. In fact, as we mentioned earlier, Dean wasn’t even sure whether modifying was the right thing to do. “As I did not plan to find such a low mileage/collector type of car, it was a tough decision to modify,” he says, before adding “ but eventually the bug got the better of me,” and so things began to happen.
Suspension and wheels came first, as per his original plans; “Knowing that I did not participate in high performance driving/autocross events, I was looking for something simple in terms of handling and comfort,” Dean explains. “The Bilstein PSS9 kit fits this bill as it is a basic coilover setup which is not too aggressive while offering, in my opinion, one of the most comfortable rides for a coilover while still improving handling capability. Along with this, I’ve also chosen a set of Dinan front and rear strut braces and a BMW X-brace, which is found as standard on the M3 LTW.” Handling benefits aside, the adjustable ride height of the PSS9s means that Dean has been able to dial-in his perfect stance and the drop he’s gone for is serious; those front arches are a hair’s breadth above the rubber while at the rear he’s got the tyres tucked just past the edges of the lips and the result is spectacular.
As far as his wheel choice is concerned, for many BBS fans it’s the holy grail for both modern and classic BMWs alike and a wheel he has a lot of love for. “It was only fitting that for a classic M3 I’d want to stick with classic wheels. My favourite wheels for the BMW have always been BBS LMs, I feel you can put these on any car and drastically improve the look, especially European applications. I owned a set on my E46 M3 and had nothing but positive experiences with them in regards to looks, performance and strength. You get what you pay for with wheels and in my eyes, they are half of the car. I did consider other wheels but this was very short-lived, I was set on LMs for my build. It turned out to be very difficult to find a set, though, as 18s were much harder to come by than the typical 19” and above. Luck still was not on my side which forced me to become a little more creative and experiment with a set taken from a Honda S2000. This presented a bit of a challenge as the offset and PCD were different but after some research I found a local wheel customisation shop which was able to adjust bolt pattern as well as offset to get them to fit correctly.”
It’s safe to say it was worth the effort as the LMs look so good on the E36, as they do on just about any BM, and here they’re finished off with a BBS stud conversion kit and those iconic red centre caps.
That’s all well and good, but the real reason we’re here is for what’s under the bonnet and it took a bit of a personal revelation for Dean to make the huge leap from mild NA mods to off-the-scale, full-on forced induction fury. “I found deals on the basic bolt-ons such as a Dinan CAI and Dinan exhaust and the car stayed in this state for quite sometime as I did not want to overly modify it, risking an adverse affect to the car’s value considering its mileage.
Eventually, realising that cars are meant to be driven and I would not be satisfied until I had it the way I wanted, I decided to open the floodgates and enjoy it while I have it,” he says and this is definitely the right philosophy. “After the basic bolt-ons, the turbo research began brewing and opened up a whole new world. For one whole year, I began researching and stockpiling the turbo components needed for my build, beginning with the actual turbo, a Garrett GT35R and SPA T3 manifold, fuel components, Cut-Ring head gasket, and Zeitronix data logging gauges and equipment, the essentials I needed to get started. After a year acquiring these components – and then some – it was all installed in one shop sitting, taking a few months to complete.
“The car was taken to David Tran at 4B Auto in Santa Clara, CA; David is known to have built some of the fastest turbo E36s around with upwards of 1000hp, so I knew I was in good hands with this build,” says Dean. “The motor was disassembled, having to remove the head for resurfacing, while upgrading the head studs with an ARP2000 10mm stud kit. From there, the stock head gasket was also upgraded to an 87mm Cut- Ring head gasket. When the head returned from resurfacing, the SPA T3 turbo manifold was mounted while the Vanos was also rebuilt and the head was finally ready to install. Once the engine was reassembled, various changes were made including upgraded fuel components such as a Rally Road high-flow billet fuel rail, 115lb high impedance injectors, and an Aeromotive adjustable fuel pressure regulator. The intake manifold was also swapped for an M50 model for better flow. Impressive to say, the engine was able to fire up at first attempt with no hiccups. David’s engine work was one of the smoother processes throughout.”
High praise indeed and there’s nothing better than a true turn-key conversion that just works, especially after such a huge amount of work. A quick glance at the engine spec is all you need to know that this is a serious performance project but all that research and time spent on it was absolutely worth it.
It enabled Dean to pick the best components and the ones best suited to helping him achieve his end goal, and all that work has yielded some astonishing numbers. Peak power now stands at 610whp, which is around 700hp at the crank however you like to do your calculations, and is backed up by 571lb ft of wheel torque, both serious numbers and definitely plenty to be getting on with.
Obviously, as well as the suspension upgrades that were carried out before Dean let loose, the chassis and transmission have received further modifications to be able to cope with that huge increase in output over stock. First of all, there’s a big brake kit in the shape of Brembo’s GT kit and before we even get onto the specs those red calipers are just killer and work perfectly alongside the red detailing on the LMs and against the white bodywork.
They do, of course, deliver on the braking front too, but then you’d expect nothing less with four-pot calipers and 355mm discs stationed up front and only a fractionally smaller pairing located at the rear. As far as the transmission is concerned, Dean has bolstered the ZF five-speed manual gearbox with a selection of UUC components, including a twin-disc flywheel/clutch combo, steel clutch line, and short shifter, all of which combine to allow it to far better cope with all that power and torque.
What we really love about Dean’s E36 M3, and we love everything about it, is the fact that, really, there’s no way for you to know just how much power is lurking beneath that pristine white bodywork. Obviously it’s not a stock car, but he’s kept all of the styling within the spectrum of normality and as a result there’s little to suggest that this might be nothing more than a lightly breathed-on older M3. “My intention for the exterior was something not too aggressive; basically maintain the stock look and body panels yet add some touches to give a slightly more aggressive look,” and we’d say it’s mission accomplished. Euro lights have been sourced from ECS Tuning and fitted all-round, along with a set of ZKW HID projector headlights; a Max Velocity RS front lip sits beneath the front bumper for a hint of extra aggression, while at the rear there’s a Mateo Motorsports diffuser and a sexy UUC adjustable carbon spoiler. The interior has been kept largely standard, bar the addition of numerous gauges and a few minor tweaks that enhance what was already there. The Vader front seats, finished in Mulberry-colour leather, have been left alone and Dean has added some M3-logo’d mats, a customwrapped Euro three-spoke steering wheel and MT Shift Boots alcantara gear lever and handbrake gaiters to complete the look.
Four years of ownership are what it’s taken to bring the E36 to this level and while it has clearly been worth the effort, there has been a lot of it involved in getting the car to where it is. As Dean himself says “I currently have no plans for a next car, other than possibly a modern 5 Series daily driver. At this point, I may have exhausted all energy to even think about starting yet another project,” and that’s something we can all relate to it, that feeling of near-exhaustion when you’ve “finished” a project, or at least got it to the next stage of its evolution. Of course, this M3 has not finished evolving, not in the slightest. “A contingency plan is actually already in place,” says Dean.
“Simultaneously with the turbo install, I have also been working on a fully-built spare motor capable of 1000hp, which was also completed about the time the turbo install was competed. Also on hand is a full drivetrain upgrade, which includes a Euro six-speed 420 Getrag transmission, DSS six-bolt 1000hp driveshaft, upgraded rear axles, and a large case 210mm limited slip differential from a 1990 BMW 750iL.
The only future decision to be made now is which turbo and manifold configuration to fit. With the upgraded turbo and motor, the car should be able to generate and handle even more power with ease. If any mishaps were to occur, these components are ready, that is if impatience does not get to me first and I proactively go ahead with the swap.”
That’s a very sensible approach to take with a completely unhinged project, and we whole-heartedly approve. Dean’s E36 is pure performance: there’s no frivolity here, it’s full-on, focussed and furious with it, and we love it.
“After the basic bolt-ons, the turbo research began brewing and opened up a whole new world. For one whole year, I began researching and stockpiling the turbo components needed for my build”
TECHNICAL DATA FILE #BMW / Turbo #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #BMW-M3-Turbo / #BMW-M3-Turbo-E36 / #Garrett / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-E36 / #BMW-3-Series-M3-E36 / BMW
ENGINE 3.2-litre straight-six #S52B32 / #S52 / #BMW-S52 , Cut-Ring 87mm head gasket (stock compression), #ARP2000 head studs, #Garrett-GT3528R dual ball-bearing turbo, #SPA-T3-turbo manifold, 610x305x76mm front-mount intercooler, #Tial 50mm blow-off valve, Tial 44mm MVR wastegate, M50 intake manifold, #Mishimoto coolant overflow, Mishimoto performance aluminium radiator, #Steward high-performance water pump, RK Tunes E85 turbo tune and MAF, 115lb high impedance injectors, Rally Road high-flow billet fuel rail, Aeromotive adjustable fuel pressure regulator, Vibrant intake filter, custom fabricated 3” stainless steel down pipe and exhaust system, #Vibrant turbo muffler, #Radium-Engineering oil catch can, #Radium-Engineering 12 micron fuel filter, Racetronix Fuel Pump wiring harness, Walbro 485lph fuel pump
POWER AND TORQUE 610whp, 571 lb ft wtq
TRANSMISSION Five-speed #ZF manual gearbox, UUC twin-disc flywheel/clutch kit, #UUC steel clutch line, Rally Road clutch pivot pin, #UUC-EVO3 short shifter with double shear selector rod, #Vorshlag polyurethane transmission mounts
CHASSIS 8.5x18” (front) and 9.5x18” (rear) #BBS-LM wheels with 235/40 (front) Hankook Ventus V12 Evo2 and 255/35 (rear) Toyo Proxes R888 tyres, BBS red centre caps, #BBS stud kit, #Bilstein-PSS9 coilovers, Vorshlag polyurethane engine mounts, #Dinan front and rear strut braces, #BMW OEM X-brace, #Brembo GT BBK with 355x32mm two-piece discs and four-piston calipers (front) and 328x28mm two-piece discs and two-piston calipers (rear), #Hawk HPS brake pads (front and rear)
EXTERIOR Alpine white, ZKW HID projector headlights, ECS tuning European front clear corners, side markers and rear lights, Max Velocity RS front lip, Mateo Motorsports rear diffuser, UUC three-way adjustable carbon fibre spoiler
INTERIOR Custom wrapped European three-spoke steering wheel, MT shift boots Alcantara gear lever and handbrake gaiters, Rally Road steering column dual gauge pod, LeatherZ centre gauge pod, Turbosmart Eboost2 boost controller/gauge, #Zeitronix ZR-2 wideband AFR, ECA-2 ethanol content analyser, ZR-2 boost and ZR-2 fuel pressure gauges
Hard-pipe-mounted Tial blow-off vlave.
Turbo is hidden away, only the air filter is visible in the engine bay.
Interior home to various gauges plus Alcantara gear and hand brake gaiters.
Gorgeous 18” BBS LMs and #Brembo-BBK .
Up front, HID projector headlights with angel eyes.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationLAGUNA E46 M3 Lush UK air-ride Cab
A schoolboy dream has become reality in the shape of a Laguna Seca E46 M3 Cab, with a few mods for good measure, of course. Words: Elizabeth de Latour Photos: Matt Dear.
DREAM WEAVER Air-ride E46 M3
Achieving your dreams, no matter how small and seemingly insignificant they may appear to some people, is an incredible feeling. From dream jobs, to dream weddings and, obviously, dream cars, these items, events and experiences fill us with sheer joy and make our lives better. Whatever your dream may be, achieving it, making it happen is a special moment; for Bally Hanspal this car was that dream and, as you can plainly see, it’s most definitely become a reality.
“BMWs have been a big part of my life,” begins Bally as we ask him to tell his tale, “with my late grandfather, dad and uncle all owning BMWs through my childhood. It always made me want one and, also, with how amazing they are to drive nothing else can come close to them. For me they really are the ultimate driving machines; despite owning other brands of cars I always seem to have a soft spot for BMWs,” he smiles, and that’s something we wager most of us can relate to.
Bally has dabbled with VAG in the past, ticking off the wheels, suspension and audio boxes along the way before moving towards the performance end of the modding spectrum, all of which served as perfect preparation for the inevitable purchase of his dream car. “When the E46 M3 was released, back when I was still in school, I promised myself I’d own a Laguna Seca blue one, one day. Many people laughed, but it was a dream I had to make come true,” he says and that steely determination is what made it happen. Bally kicked BMW ownership off with an E46 320Ci Sport, the biggest engine he could insure at the tender age of 20, but it was just a stepping stone until he could get his hands on the full-fat, M-powered 3 Series of his dreams. “I remember the day when I bought the car so clearly,” he smiles, “a friend of mine phoned me up – it was a warm Saturday afternoon – and he phoned me asking if I had found any cars for sale. I mentioned I had seen this one for sale on Autotrader, not too far from me. He said ‘Let’s go down and take a look’ so we headed over and after just walking around the car and checking it over I knew this was the one for me. The condition of the car was tip-top and it was so well-maintained that I would have been kicking myself if I hadn’t bought it.”
There were, says Bally, no plans to mod the car when he first got it, and he actually thought that was going to leave the car alone but here we are, it’s in a modded BMW mag. It wasn’t long, he says, before he started ordering parts for his M3 and he didn’t mess about. Wheels came first, with a set of CSL 19s chosen and to go with those he picked out a custom set of BC Racing coilovers to deliver the required drop. With the E46 M3’s natural good looks now nicely enhanced, Bally turned his attention to the audio system and fitted an Alpine double-DIN head unit along with a set of MB Quart component speakers front and rear, which made it into the car’s current build state. So too did the amber corner lights, which look great against that bright, bold blue bodywork, and Bally has also fitted a seriously sexy set of K-Sport brakes, with monster eight-pots up front wrapped around 365mm discs and four-pots at the back, and the red calipers really pop against the body and wheels.
All was going well, but Bally wasn’t in a good place with his suspension. “The BC coilovers were pretty awesome I must say, but with the car not being practical with the way I wanted it the next step was air. After speaking to many people and reading many reviews I went for Air Lift’s 3P setup and I also added Powerflex wishbone and anti-roll bar bushes just to tighten-up that awesome drive.” Now Bally can enjoy all the lows he can eat, so to speak, while still being able to actually drive the car and we like the fact that he’s also done a little bit more than just the bags alone, to allow him to really get the best out that awesome chassis that the E46 M3 is blessed with.
With air on board, Bally decided it was time to up his wheel game but with so many good-looking wheels available for the car, this was not an easy task. It was helped slightly by the fact that he’d always had his eye on the wheels he’s ended up, that being a set of Schnitzer Type II Racing three-piece splits, and they are gorgeous, the metallic grey centres really suiting the whole colour scheme on the car. Where people often go big on diameter, Bally has stuck to a sensible 18” but he’s gone wide; the fronts are a reasonably large 9.25” but the rears are a monster 11.25” across and they fill the arches to bursting, and with it aired out the fitment is perfection.
As far as styling is concerned, Bally has had the front bumper smoothed and it’s been enhanced with the addition of a full carbon fibre CSL front splitter, which not only adds a healthy dose of visual drama but also drops the car even further towards the Tarmac. Moving inside, that vibrant interior didn’t start out life this way and the original seats have made way for a striking red ensemble; “I wanted my M3 to stand out from the rest,” he says, “and after looking at many options it had to be the red Nappa leather, giving the car the Super Man look,” he grins and now it all makes sense. But here too there’s more than meets the eye, and where you might, perhaps, expect to see carbon on a car like this you will instead find that all the interior trims have been finished in Alcantara. “The trims are my favourite mod on the car and they were something I had in mind for a while, but it was a big problem getting them done, with so many companies saying they couldn’t do it and that it couldn’t be done. In the end my dad and I, along with my grandmother, did them together,” and the end result is absolutely unique and wonderful with it. Finally, in the boot, you will find the single air tank and Viair compressor that make up the air ride and, a neat touch, is that with the boot lid being de-badged, the air tank now wears the M3 badge instead.
As far as performance mods are concerned, Bally has so far just added a gorgeous GruppeM carbon intake up front and a de-catted Scorpion exhaust system but it sounds like the next big mod on the to-do list is a supercharger and going by his determination and refusal to give up with any part of the build so far, you can be sure that’s going to happen before too long. There’s no rush though, Bally has no plans to let his dream car go anytime soon; “After now owning the car for two years I’d say it’s an on-going going project that will probably never end,” he chuckles. Bally’s built himself an absolutely beautiful M3, one that’s packed with neat, unique touches that really make it stand out and it’s a car he can truly be proud of. Dreams can come true.
GruppeM carbon fibre intake the only performance mod, for now…
Gorgeous 18” AC Schnitzer Type II Racing splits.
“I wanted my M3 to stand out from the rest and after looking at many options it had to be the red Nappa leather, giving the car the Super Man look”
Alpine double-DIN head unit and custom Alcantara trims.
Red Nappa leather looks fantastic against bodywork.
Custom-mounted Air Lift controller.
Air install has been kept simple and the air tank now wears the M3 boot badge.
TECHNICAL DATA FILE #BMW-E46 / #BMW-M3 / #BMW-M3-E46 / #BMW-M3-Cabrio / #BMW-M3-Cabrio-E46 / #BMW / #BMW-3-Series / #BMW-3-Series-E46 / #BMW-3-Series-M3-E46 / #BMW-3-Series-M3 / #BMW-3-Series-Cabrio / #BMW-3-Series-Cabrio-E46
ENGINE AND TRANSMISSION 3.2-litre straight-six #S54B32 / #S54 / #BMW-S54 , #Scorpion exhaust system with de-cat, GruppeM carbon air intake, six-speed manual gearbox, short-shift kit
CHASSIS 9.25x18” (front) and 11.25x18” (rear) #AC-Schnitzer-Type-II-Racing three-piece wheels with 215/35 (front) and 245/35 (rear) tyres, #Air-Lift-Performance-3P air suspension, #Powerflex wishbone and anti-roll bar bushes, #K-Sport #BBK with eight-piston calipers and 365mm discs (front) and four-piston calipers and 330mm discs (rear) / #AC-Schnitzer-Type-II / #AC-Schnitzer / #Air-Lift-Performance
EXTERIOR #Laguna-Seca-Blue , smoothed front bumper, amber corner lights, gloss black front and side grilles, carbon fibre full CSL front splitter, CCFL angel eyes
INTERIOR Red Nappa leather seats and door cards, Alcantara-trimmed dash, door grab handles and centre console, #Alpine double-DIN head unit, #MB-Quart components front and rear
THANKS A massive thank-you to my family for the support and help putting it all together, Adam and Dav down at Autobahn for the fitting of many parts, Ryan at Ryandetails for the amazing job on the detailing of the paintworkStream item published successfully. Item will now be visible on your stream.
- Post is under moderationRazzle Dazzle Wild, wide-body, air-ride E36 M3. Beneath the jarring geometric shapes and black-and-white lines, there’s a pretty astonishing M3 hiding in here. And the deeper you dig into its story, the more mystery and intrigue you unearth… Words: Daniel Bevis. Photos: Brian McGee.
The Zebra M3’. That’s a name a lot of people seem to throw at this car. But have you ever seen a zebra with stripes like this? That’d be one funky-looking equid. No, the style you’re seeing here is a retro mind-melter known as ‘dazzle camouflage’. We know what you’re thinking – camouflage is meant to blend you into the background, right? Like the traditional greens and browns of army gear, or the beige tones used for desert combat. But what can possibly be so jagged in black-and-white that you could morph with its style like this? Some sort of explosion in a print factory? No, the idea here is not simply to hide, but to hide in plain sight; to confuse and distort. Dazzle camo first appeared on ships in World War I, its deliberately interruptive patterns intended not to conceal the vessels, but to make it impossible to judge how big they were, how fast they were going, and how far away they were. And that’s why the offbeat camo works so well today on a wide-body Pandem E36 M3, and makes those three questions are easy to answer. How big is it? Very, thanks to those Rocket Bunny extensions. How fast is it going? Again, very – it’s an M3. How far away is it? Sweetheart, it’s totally in your face.
The act of being totally in your face is all in a day’s work for Carl Taylor, of course. He, as some of you will be aware, is the driving force behind the Players shows as well as a marketing superhero for Air Lift, and what he doesn’t know about badass show-stopping rides could be comfortably felt-tipped on the back of a postage stamp. The germ of the idea that led to this car in fact appeared back before Wörthersee 2014, when Carl and Rotiform’s Brian Henderson built a pair of E36 Art Cars with Rocket Bunny kits; a 323i and a 325i. “I loved driving that car, and I decided I needed to build another one once I moved to the States… but this time with more power,” he recalls. “So I bought an M3. I found it locally after I moved to California – it was in pretty good condition, the paint was sunburnt but that didn’t matter as I was planning to wrap it anyway,” he says.
Now, you don’t get to be the figurehead of an industry powerhouse like Players without having a few ideas buzzing around the ol’ brainbox – here’s a man who, after all, can count around fifty cars in his personal history with every single one of them being modified in some way or another – so of course he had a plan for the car. Its fate was written in the stars before he’d even hauled it back to his sun-drenched new home. “I’d broken up the Wörthersee car and saved some parts from that,” he explains. And before the scene knew just what had hit it, Carl was delivering a sucker punch at SEMA 2014 with a fresh, super-wide new build. It wore a minty green Tic-Tac race livery, chosen to emulate the Team Valier E30 M3 that used to race in the DTM, but caricaturised to be broader, fatter, meaner, scarier. The E36’s stock arches were unceremoniously savaged to allow the fitment of a full Sarto Racing kit, with non-M bumpers swapped on to flow more cleanly with the new lines. A set of colossal Rotiform ROCs filled the arches, resplendent in satin gold, and – inevitably, given Carl’s line of work – a top-of-the-range Air Lift setup found its way in. It had a full-on race car look inside; Cobra bucket seats, a rollcage, not a lot else. The effect was pleasingly startling, Carl’s decades-old coupé with its relatively short (but nevertheless superbly well-chosen) spec list more than holding its own against the show’s multi-million dollar builds. What’s key with projects like this, you see, is being relatable as well as aspirational. When you make something as awesome as the Tic-Tac E36, you can shift a lot of wheels, and air-ride kits, and seats, and bodykits, and… well, you know how the game’s played.
The game, naturally, never stops. Not for a second. So it was imperative for Carl to shake up the formula right away; the car would be returning to SEMA the following year, and it had to be rocking some significant changes. You can’t stand up on a Broadway stage and sing the same song twice. The next thing we knew, the broadhipped M3 was wearing a fresh Art Carinspired wrap, emulating that Wörthersee road trip that kicked the whole process off, along with a Rocket Bunny Pandem kit, a jarring set of Rotiform USF wheels (a sort of double-three-spoke affair, very retro JDM) and a raft of detail changes. The scene was set for the car to once again break necks and steal hearts at the world’s largest aftermarket tuning show.
Except that, as is his wont, Carl changed his mind at the eleventh hour. “Six weeks before SEMA 2015, I decided to change it a bit,” he says, dabbling masterfully in understatement. Indeed, you’ve probably spotted the car’s not dolled up like an oldschool Art Car in these photographs; no, we’re back at the dazzle camouflage motif we opened with. And there’s also a V2 Pandem kit thrown into the mix. This isn’t so much hiding in plain sight as just running up to people in the street and smacking them across the chops with an embroidered leather glove. If you want a fight, sure, this angry M3 is definitely spoiling for a rumble. “Being a sales manager for Air Lift Performance, I had to equip the car with the latest 3H system with Performance struts,” Carl reasons, “and we had Because Bags create a custom rollcage install for it too.”
This really is a sight to behold, the way the tanks and hardlines caress the cage like one of those terrifying metal spiders in The Matrix. It’s details like this that steal the SEMA headlines. “I only ever run Rotiform too,” he grins. “The design was left down to Brian Henderson, however I did choose the Corky Pink finish myself to add some colour to the car.” Yep, you certainly can’t argue with the logic of that. Those flashy fourspokes do stand out, don’t they?
“We’d just decided that we really needed to make a change if we were going to return to SEMA with the same car,” Carl shrugs. “We had the race car interior theme reworked with some custom Cobra Suzuka Pro seats, and the wheels came out perfectly, the finish is amazing – I think they’re my favourite part of the car. The rebuild took Vaderwerks around two weeks to finish up, with the kit install and then wrapping it and setting the air up with the new wheels. Everything worked out perfect.”
Now, it’s probably time to address the elephant in the room. SEMA 2015 was a little while ago… so why are we featuring the car now, in 2017? Well, this ‘zebra’ evolution was only one step of many along this everevolving car’s path. Things have happened between then and now. Important things. “The car was sold before we were even back from SEMA,” Carl admits. “Someone heard about the project and made an offer, so it was time for something else. I regret selling this car, to be honest, as after all the work it looked the best ever.”
But he needn’t be sad, as the car’s latest curator isn’t one to rest on his laurels or let the grass grow. Dylan Coleman is the name to watch – you may know him as @hawaiianeze on Instagram – and he’s a man with more than a few plans. Dylan’s set up a pretty astonishing business in Hollywood, you see: he and his father, Lee, are the brains behind StreetFighter LA, and they’ve been working with the fabled Long Tran at LTMW to kick out some pretty mould-breaking builds. “I was looking for another project to start after we parted with our #ProjectHulk Liberty Walk Challenger,” he explains. “I’d come from a BMW background, and the E36 M3 has always been one of my favourite models. While looking around for potential cars, our friends at Rotiform Wheels contacted us and just so happened to know someone who was looking to sell…”
Yes, Sherlock, that person was Carl. So Dylan was cruising around LA in one of the world’s best-known BMW builds. That must have felt pretty good? “Well, yes and no,” he says. “We brought the car back to Los Angeles after SEMA, where I started to use it as a daily driver while we were finishing up some other projects. But although the car was a great build that caught the attention of everyone on the road, I never truly felt the connection like I did with my past projects; with high mileage and a stock engine it was time to look to start rebuilding or swapping the engine…”
But that, friends, is another story for another day. You’ll just have to keep an eye on your favourite BMW modifying magazine for the next chapter. For now, however, let’s leave Dylan basking in the glory of Carl’s achievements, sprinkling on some of his own unique blend of magic, and formulating his plan of attack to take this iconic build to the next level. Hiding in plain sight? Boy, it sure is dazzling.
TECHNICAL DATA FILE #Wide-body #Air-ride #BMW-E36 / #BMW-M3 / #BMW / #BMW-M3-E36 / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-E36 / #BMW-3-Series-M3-E36 / #Rotiform / #Air-Lift-Performance / #Air-Lift / #BMW / #BMW-M3-Wide-Body / #BMW-M3-Wide-Body-E36 / #BMW-E36-Wide-Body / #BMW-E36-Art-Car / #BMW-Art-Car / #BMW
ENGINE AND TRANSMISSION Stock #S52B32 / #S52 / #BMW-S52 3.2-litre straight six, full #Magnaflow stainless steel exhaust system, #K&N induction. Five-speed manual gearbox, welded diff
CHASSIS 17” #Rotiform-RBQ wheels in Corky Pink with 235/45 (front) and 255/40 (rear) Toyo R888 tyres, full #Air-Lift-Performance-3H airride System
EXTERIOR #Rocke-Bunny-Pandem-V2 wide-body kit with #Downstar fixings, custom-designed 3M wrap by JD Wraps installed by #Vaderwerks , #AC-Schnitzer mirrors
INTERIOR #Renown steering wheel, custom Cobr a Suzuka Pro seats, #Wiechers roll cage, custom Because Bags roll cage-mounted #Air-Lift install
THANKS Gino the Master Sepe at Vaderwerks, Brian, Jason and the Rotiform team, Mark and Adam at Cobra Seats, James and Ken at Because Bags, Corey and all my Air Lift Colleagues, Russ and Erik at JD Wraps, Paul Kitch at 3M, Stan at Toyo Tires, 714 Tires, LTMW, Magnaflow, and Renown
“I had to equip the car with the latest 3H system with Performance struts”
“The wheels came out perfectly, the finish is amazing - I think they’re my favourite part of the car”Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationEvolution Not Revolution Gorgeous US E30 M3. There’s a purity to the E30 M3 that’s ensured a strong and devoted following over the years. But that doesn’t mean you’re not allowed to tweak and refine them… Words: Daniel Bevis. Photos: Jordan Unternaher.
High-end resto-modding is big business these days. We see it in all corners of the automotive world – Eagle will sell you a Jaguar E-Type, if your pockets are sufficiently deep, with better-than-new bodywork, classic looks, and thoroughly modern power, suspension and brakes. Singer will do the same for a Porsche 911, Icon offer a new-old Ford Bronco, it’s everywhere. Jensen Interceptors, Peugeot 205 GTIs, you name it.
The E30 we see here, however, is a slightly different interpretation of the timeworn resto-mod ethos. It hasn’t been stripped down to its component nuts and bolts in a hermetically sealed lab then rebuilt as a sort of retro-modern pastiche of its former self.
No, its owner, James Dallas of Ohio, has instead chosen to optimise and contemporise his iconic three-box 3 Series by following two distinct paths: firstly, to cherry pick the finest parts from the evolutionary E30 timeline, and secondly to bring all of that glorious power and tactility screaming into the 21st century. This, then, is an M3 re-imagined – a fulfilment of a cerebral vision, spirited into reality via the medium of methodical and careful planning. Like a chef who’s ever so precise about the measurements of their ingredients, this is proper less-is-more stuff.
An interesting approach, really, given how more-is-more the E30 M3 was in spirit in the first place. What’s key to remember is that time has mellowed the lines of this box-arched whippet; it’s no longer a hooligan bruiser, but a bona fide collectors’ item honed for B-road blasts and spirited forays into licence-losing velocity.
“I’ve been into BMWs forever, really,” says James. “I owe it all to my uncle Dennis for properly getting the obsession going - they are such amazing vehicles, and the drivability of the E30 is unprecedented; a true driver’s car. The first BMW I bought was actually a 1998 M3 sedan,” he continues. “It offers the best bang for your buck, hands down! Simple as that.” This practical everyday-superhero still sits on the Dallas driveway, but it’s the older upstart that’s drawing all the attention today. James had dabbled in modifying the newer car with uprated suspension, Dinan parts and basic bolt-ons, but the acquisition of this poster-boy of homologation allowed the scales to fall from his eyes as he began to view BMW ownership in a fresh light. Well, not so much ownership, not any more – call it curatorship.
“It’s the true benchmark of the M3 family,” he enthuses, “the way it connects you to the road and really makes you drive the thing is something you just can’t experience in newer cars. It’s also the one car that I’ve genuinely always wanted to own - the body lines are something we’ll never see the like of again.” He’s right; it is impressive how the reworked E30 transformed the svelte everyday saloon into something pumped-up and muscular. It’s worth remembering just how many body panels were junked from the standard car by BMW M to create this near-mythical beast.
“This M3 originally came from the East Coast – New Jersey, I think,” says James. “I actually purchased it from California – I’d say the condition was fair-to-good at that time. And yes, I definitely had a plan in mind for the car right from the start; I knew the exact wheels I wanted, the overall style…
I’ve always enjoyed the look and excitement of the old DTM cars, so that was definitely a major influence and a huge inspiration.” First things first, though – these have always been function-over-form cars, it’s just a happy coincidence that they happen to look frickin’ awesome, so James’s first job was to ensure that the oily bits were all just so. That iconic S14 engine (employing just four cylinders, chosen because it was small and light, but more than happy to make mincemeat of contemporary six-pots) was lovingly torn to bits and fully refreshed: all-new OEM parts - the thermostat, belts, plug wires, and then came the addition of cams, head studs, and a Turner chip to imbue a fresh sense of urgency. Any S14 is a good S14, but one that’s operating as-new and then a little bit more is very much a thing to aspire to. Stay in school, kids – these things can be yours… “I didn’t really run into any problems, but it was a long and tedious process to say the least,” he recalls with a grimace. “There was a lot of sourcing BMW factory parts. A lot!”
One area that will definitely stick in the craw of the purists is the suspension, as many will argue that there’s not a damn thing wrong with the stock setup. But in the spirit of resto-modding, James was keen to make sure that the handling matched the power in a thoroughly modern sense, and that’s the reason why you’ll find a set of high-end Ground Control coilovers nestling perkily beneath those lantern-jawed arches. “I felt it was the best overall choice for response and handling for the car,” he shrugs. And it’s his motor, so what he says goes.
The styling is what’s really interesting here, as it eagerly feeds that whole overarching less-is-more ethos with a keen sense of the historic timeline of the E30 M3’s evolution. You see, the timeline in a nutshell (heavily edited, as we don’t have space to chew over the full history here) is that the model arrived in early 1986 in Europe – America had to wait another year – and it immediately embarked upon a programme of constant reinvention. The M3 Evolution arrived in 1987, rocking a revised cylinder head, and then 1988’s Evolution II knocked things up a notch with all sorts of engine upgrades – compression ratio, intake, management, all sorts. It also had thinner glass, a deeper front airdam, an additional rear lip spoiler and lighter bumpers.
Befuddlingly, the Evo II is generally referred to as the M3 Evolution as BMW didn’t recognize the original M3 ‘Evo’ as sufficiently different to merit a different name.
Confused? Try the subsequent Evolution III then, which was actually the Sport Evolution – this #1989 model had further extensive engine upgrades along with adjustable front and rear spoilers, lower suspension and wider wings…
But let’s not get bogged down in history, or nitpicking, we don’t need to discuss the minutiae of the Tour de Corse, Europameister, Cecotto or Ravaglia editions here. Suffice it to say that James had read up on his history and carefully chosen the best bits from each of these evolutionary steps to turn his E30 into what he deemed to be perfect: the Evolution II front lip, the adjustable Sport Evo rear spoiler, the Evo air box, the Evo II steering wheel – subtle differences, probably only noticeable to true E30 nerds, but vital stuff nonetheless. It’s this dedication to geekery that really makes the build pop.
“It was always going to have BBS RS wheels,” says James. “Truly, I feel they are the best period-correct wheel for this vehicle, and I think they look fantastic. It fits perfectly with the old-school DTM look I was going for. I didn’t want to change anything with the interior though, as the M3 has the Cardinal carpets, which are pretty rare, so I left it factory. Just freshened it up, cleaned and re-bolstered the front seats.”
A few further modifications were carefully stirred into the mix over the course of the eighteen-month resto-mod exercise, in the form of a short-shifter and a tighter Z3 steering rack, and James’s favourite upgrade of them all is the diff: “I swapped in a 4.27 LSD, and I love it,” he smiles. “It gives you that immediate response as you come out of a turn or as soon as you hit the gas.”
And that’s the point of an E30 M3, isn’t it? Immediate response, granular feedback, the synthesis of man and machine working harmoniously as one. Sure, this example might have concours judges turning up their stuffy noses, but they’re not the ones driving it. James’s modern reinterpretation of this iconic and dreamlike car is pretty much spot-on – less-is-more, and at the same time utterly outrageous.
TECHNICAL DATA FILE #BMW-E30 / #BMW-M3 / #BBS / #BMW-M3-E30 / #BMW / #BMW-3-Series / #BMW-3-Series-E30 / #BMW-3-Series-M3-E30 / #BMW-3-Series-M3
ENGINE AND TRANSMISSION 2.3-litre four-cylinder #S14B23 / #S14 / #BMW-S14 , #Eisenmann exhaust system with DTM tips, #Evolution air box, #Turner chip, #Schrick cams. Five-speed manual gearbox, 4.27 LSD
CHASSIS 8x16” (front) and 8.5x16” (rear) #BBS-RS wheels with 255/40 (front and rear) BF Goodrich tyres, Ground Control coilovers, Ground Control camber plates, cross-drilled discs, Z3 steering rack
EXTERIOR Salmon silver paint, Evo II front lip, Sport Evo rear spoiler
INTERIOR Original Cardinal Red interior, Evo II steering wheel
THANKS First and foremost, my uncle Dennis. Also, Cam Peugh, Ian Simon, Robert Santen, Chris Balich, and Brian from Mworks for helping refinish the RSsStream item published successfully. Item will now be visible on your stream.
- Post is under moderationSafety First 650hp supercharged E90 M3.
Safety cars are always in front – they have to be, they’re there to back the pack up. But in the case of this raucous tribute, it’s in front because nobody else can keep up… Words: Daniel Bevis. Photos: Speedyshots.
THUNDERSTRUCK 650hp #G-Power supercharged E90 M3
Safety cars, or pace cars, have always been a little bit naughty. This makes perfect sense, as they need to be inherently fast and capable machines if they’re going to have any hope of taming a pack of wild racing machines. Sending a farty old Lada out into a field of DTM tearaways would be the very antithesis of ‘safety’.
On the face of it, they’re a necessary evil in motorsport; they break up the action, they slow things down. They’re sent out to haul up the pack when there’s debris to be cleared up or a surprise monsoon has suddenly presented itself, and there’s a natural perceptual bias against them in the eyes of the fans in that, no matter how fast or formidable they may be, they are – by virtue of why they exist – the slowest things on the track.
This, of course, is all rather unfair on the poor beleaguered safety car. But fear not – there’s a groundswell subculture that celebrates these often-iconic creations, championing them for their mighty performance as much as the vital role they play in keeping motorsport ticking. This kind of thing’s been going on since the first appearance of a safety car in the Indianapolis 500 in 1911, while the first example in Formula One – a Porsche 914 – appeared in 1973. Classic NASCAR pace cars have taken on a life of their own as collectors’ items, and arguably the most popular safety cars of recent times are the BMWs used in MotoGP. 2016’s weapon of choice was the shiny new M2, and the series has variously used the M5, M6, X6 M and numerous others; each one has offered aggression in spades and, as you’d expect from an M car, blistering performance. All you need to keep a bunch of wildheart racing drivers safe!
This E90, then, is a tribute to BMW’s keenness to push the envelope of safety car desirability: a four-door missile, caricaturised in all the right places to create something that’s frankly rather quicker and scarier than quite a lot of race cars – or, indeed, race bikes. This project is the brainchild of Karl Jungmayer, who regular readers will remember as the mastermind behind our January 2017 cover car – a 1 Series with a V10 violently shoved into it. The third Karl in line within a #BMW garage in the sleepy enclave of Geiselhöring, southwest Germany (his grandfather, Karl, set it up; he passed it down to his son, Karl, and it then transferred to the incumbent Karl), he spends his days doing unseemly and frankly unhinged things to powerful cars with Bavarian propeller badges. And as bases for project cars go, you can’t really miss the target if you’re starting off with an E90 M3… You’ve got 420hp right out of the box, a sublime chassis and more ingrained passion than you could possibly know what to do with.
Unless you’re someone like Karl, that is. He knows exactly what to do with it. Refract it through a filter of insanity, collect the ensuing scattered beams of light, compress them into a diamond of pure retribution, and throw it full in the face of the tuning scene. “BMW is my life, my family, my hobby, that’s why they’re so special to me,” he says. “I’ve owned a lot of them, and they’ve all had modifications. And for this project? Well, I’m a big fan of the MotoGP, and I’m also a big fan of the E90 M3, so it made sense to combine the two.” There you are, that’s about as complicated as it needs to be. “It’s effectively my interpretation of a MotoGP safety car, with more power and bigger wheels!,” he grins.
That, we reckon, is the best kind of safety car, so let’s look at that power issue first. You see, while the formidable S65 4.0-litre V8 would be mighty enough for many, Karl merely saw this as a starting block, and got on the blower to G-Power to chew over the perennial carnival affair of forced induction. The result was the acquisition and subsequent modification of an SK II CS supercharger kit, a Stage 2 setup that requires its own chargecooler system as well as, of course, plonking a hilarious mass of orange mischief right there on top of the engine like some kind of malevolent jellyfish. characteristics of BMW’s own work, rather than to radically alter and transmogrify, offering (on paper, at least) a broadly similar feel to a standard car, but amplified by several orders of magnitude.
This, however, wasn’t enough for Karl. Too much is never enough. So you’ll also find another mischievous embodiment of modern high-octane lunacy under that freshly-stickered bonnet, in the form of a Snow Performance water/methanol injection kit. The science of this is to reduce inlet temperatures by up to a 100ºC, markedly increase fuel efficiency, eliminate detonation, and ultimately increase peak power by around 20%. Which is all good fun. It basically achieves this by squirting a finely atomised mist of water/methanol mix into the combustion chambers at just the right time in the fuelling cycle for tiny rabbits to be pulled out of hats and all manner of fi reworks to go off. So how does 650hp grab you? By the lapels, that’s how, and it shakes you around all over the place like a damn ragdoll. Just look what it’s doing to Karl’s rear tyres, for goodness’ sake.
You’ll be pleased to note that all of this effervescent combustion tomfoolery is being channelled through a manual gearbox – six on the floor, maximum attack – and the interior has come in for a racy makeover. “It’s got the BMW M Performance seats, pedals and steering wheel,” Karl points out, “and there’s also a Wiechers rollcage, which has been colour-matched in Alpine White.” The insides are neatly fused with the exterior aesthetic, and what an exterior it is; the E90’s lines are naturally brutalist, masterfully combining four-door sensibleness with the sort of cartoonish proportions that make it look like a bodypumped bouncer in a slightly-too-small suit, and Karl’s taken all of this to the next level with an authentic-looking set of MotoGP Safety Car decals. It is, for all intents and purposes, the real deal. Well, the real deal plus 50% or so, really. And it does make for a hilariously imposing presence on the road – think about it: if you’re dressing up a project car in a tribute livery, it is – for fairly obvious reasons – unlawful to mimic the look of a police car or, say, an ambulance. But a motorsport safety car? Sure, that’s pretty much fair game. And no-one will be suspecting the utterly, unspeakably vast quantities of extra horsepower that this canny tuner has shoved into it. At least, not until the lights turn green.
“The car is so powerful,” he muses, thoughtfully, “I like this car.” Coming from a man with a V10-powered 1 Series in his stable, alongside heavily tweaked F11s, E46s, E61s and a whole lot more, this is a stirring (if modestly stated) sentiment. “It does need more power though,” he adds, decisively. “And more boost.”
But of course. We couldn’t expect anything less from a man like Karl. Just remember – however nuts this car becomes, it’s a safety car, it’s there for your protection. If you see him up ahead of you, you’d better not attempt an overtake – although the reasons for that on the road may be very different to those on the race track…
“As bases for project cars go, you can’t really miss the target if you’re starting off with an E90 M3”
“BMW is my life, my family, my hobby, that’s why they’re so special to me”
DATA FILE #Supercharged / #BMW-E90 / #BMW-M3 / #BMW-M3-E90 / #BMW-M3-Supercharged / #BMW-M3-Supercharged-E90 / #BMW-3-Series / #BMW-3-Series-E90 / #S65-Supercharged / #G-Power / #Breyton-GTS / #Breyton-Race / #BMW-3-Series-M3-E90 / #BMW-3-Series-M3
ENGINE AND TRANSMISSION 4.0-litre #V8 #S65B40 / #S65 / #BMW-S65 , modified #G-Power-SK-II-CS supercharger kit with #Snow-Performance water/ #methanol-injection , custom home-made exhaust system. Six-speed manual gearbox
POWER and torque 650hp, 485lb ft
CHASSIS 8.5x20” (front) and 10x20” (rear) #Breyton-GTS-Race wheels, 15mm spacers, 245/30 (front) and 295/25 (rear) Continental ContiSportContact 5P tyres, #Brembo eightpot #BBK (front), stock E90 M3 brakes (rear)
EXTERIOR M3 CRT front spoiler with carbon fibre flaps, carbon fibre rear spoiler and diffuser, E90 LCI taillights, Safety Car livery
INTERIOR #BMW-Performance seats, pedals and steering wheel, #Wiechers rollcageStream item published successfully. Item will now be visible on your stream.
- Post is under moderationThis E36 M3 R is one of the rarest of the rare, but that didn’t stop one owner beefing it up to be a full-on track terror. Words and photos: Chris Nicholls.
FULL-ON BMW-E36 / BMW-M3 R Hardcore Australian special
GYM JUNKIE UNICORN Ultra-rare E36 M3 R from Oz
Just 12 E36 M3 Rs were made available to the public back in the mid ’90s by #BMW Australia. Built, as some of you may know, to be the ultimate non-GTR E36, the cars were basically Group N racers for the road. They came with full Motorsport Group N suspension, a tweaked engine putting out 325hp (more than any E36 M3 other than the GTR), AP Racing four-piston brakes all-round, the full M3 GT bodykit, plus Super Tourer wing and extendable splitter, and almost all creature comforts, such as rear seats, air-conditioning and fog lights, removed. Developed by the legendary Paul Rosche, then M GmbH’s head of motorsport, and team members from the famous Australian Frank Gardner’s outfit, including Ralph Bellamy - former F1 engineer and one of the men responsible for inventing ground effects at Lotus - the M3 R remains to this day arguably the greatest E36 variant you can actually buy, albeit one that required a racing license when purchasing it new and one that is, unsurprisingly, also climbing in value today.
Which makes it all the more bizarre that this M3 R’s previous owner, Alan Palser, decided to tune it so much there’s basically nothing left of the original car bar the little silver build plate on the centre console. To whit, there’s the DTM Fiber Werkz widebody kit, JRZ dampers with Eibach springs, Turner front and SM Motorsport custom rear anti-roll bars, SM Motorsport custom control arms, Alcon monobloc front and AP Racing rear calipers and two-piece slotted discs, AP racing twin-plate clutch, boot-mounted Speed Master fuel cell with Bosch 044 pump and swirl pot and a range of engine mods, including a very sexy CSL-style carbon airbox, which bring the power up to around 370rwhp. In a car running Hankook slicks on its 11x18” Apex EC-7 wheels, and weighing only 1220kg thanks to being completely stripped and caged, that makes this is one rapid racer indeed. But one that isn’t really much of an M3 R anymore.
So why did Alan do it? Well, there were two main reasons. The first is an all-too familiar story. Having fallen in love with BMWs as a lad growing up in the Group A era, Alan decided he had to have one, and eventually managed to fund the purchase of his third-hand M3 R ten years ago when it had just 40,000km on the clock. However, as one does, he started to chat more and more to people in the club scene and eventually got talked into attending a few track days. And that’s when the bug bit, hard.
“At the time I bought it, I would say the plan was to have it as a road car, but having started to talk to some people in car clubs, they said, ‘Oh, you should come down and join the club and have a go on the track on a club day’. Then once I’d done that a couple of times, I thought, ‘Oh yeah, I think I’m going to enjoy this’. So I once I’d done a couple of those, I started orienting the E36 more towards that and less as a car to drive on the road.”
And once Alan started, he found it hard to stop, spiralling down that route we all know of upgrading ever more bits and pieces. “Once I was on that path, it was easier to continue on it, rather than scrap it and go back to a start point again,” he says. Eventually, after entering a couple of tarmac rallies, Alan decided it was time to develop it fully and, having sent it off to BMW whiz Sam Markov at SM Motorsport in Wodonga on the Victoria/New South Wales state border, things just got even more extreme, eventually leading to a wilder state than it is in now (this engine is its second after the previous fully-built and E85-tuned beast blew prior to the sale to its current owner). As for the second reason, that was more to do with the used car market at the time. Although it might seem silly in today’s climate, despite its rarity, engineering pedigree and extremely finely-honed nature out of the box, the M3 R wasn’t actually all that valuable ten years ago. You could pick one up for less than AU$50,000 (around £25,000) and there wasn’t a sense that they would be a future collectible. Hence why Alan says “I didn’t feel like I was totally killing something that was worth a lot of money at the time.” Of course, thinking about it now, he agrees that were he to do it all again, he would have started with a basic 3 Series shell, but such is life.
Eventually, having arrived at a development crossroads, Alan was unsure whether to replace the engine with an S85 V10 or the like, or sell it to fund something like a Z4 GT3. In the end he decided to part with it, which is where current owner and Avis franchise holder (hence the stickers) Les Sears comes into the picture. A Holden man for much of his time in motorsport, one drive of an E46 back when it was new changed his life forever and after that, Les became a devoted BMW fan, building up quite an impressive collection that currently includes a stock E36 M3, three E46 M3s (one road car, one complete racer and another in the build) and an F82 435i daily. Hence why, when he found out this car was up for sale about a year and a half ago, knowing how rare it was and how much effort had gone into it, he pounced on it.
Of course there was still the matter of the blown engine to take care of before he could enjoy it at his local motorkhanas and track days, and given the previous highly-strung motor’s issues, and the fact the chassis set-up was good enough to ensure speed without huge power, Les decided to tone down the new power plant a little in order to keep it reliable. Thus, right now, it runs a completely stock 3.2-litre bottom end, and only the aforementioned carbon airbox with custom trumpets (on stock runners), K&N pod filter, ARP rod bolts, 296º Schrick cams, Vanos delete and Motec M600 ECU as mods. Despite this, thanks to Sam Markov’s nous (Les kept him on as the car’s mechanic, as unlike for Alan, Sam was local), the car puts down 367hp at the wheels, which as we said is still plenty in a circa-1200kg car, and easily enough to keep Les at the top of the time sheets at whatever event he enters. “Everywhere you take it, if it doesn’t win, it’s always second or third. It’s a quick little car. It’s very, very well balanced, and it doesn’t do it with horsepower, it does it with cornering speed,” he says.
Despite its pace and the fact it’s no longer much of an M3 R though, Les has no desire to risk such a rare car (even in its current state) in actual racing, saying “I’m a little reluctant [to race it]. I don’t mind doing the sprints in it, but once you get into a race meeting, I’d hate to damage it. I’ve got an E46 [an ex-Targa Tasmania machine, no less] which can take a bit of a hit and it’s easy to panel beat, but this thing with that body kit on it, it’s quite hard to start rebuilding that. I’ve got a new E46 being built as we speak too, and when that’s finished I’ll put this car up on blocks and leave it there and won’t race it at all”.
Now, given he’s only had the car for less than two years, such a plan might sound impossibly sad, but it’s actually part of a grander scheme to leave it in as good a condition as he can for his son, who also races. Essentially, Les says that he’ll take the M3 R out every so often just to keep it running until his son takes it over, and continue racing in the new E46 once that’s built. “It’s a new shell that we’ve got in another shed with a new cage through it and I’ve bought all the parts for it. I’ve just got to assemble it, basically,” he says. “I’ll do that the same way - it’ll have a 3.2-litre in it, but the bottom end won’t be stressed out and we’ll just get it to breathe.”
Hopefully both cars can see the use they deserve for many years to come, as although Les is now 69, he has no plans to stop racing anytime soon, and that’s the sort of thing we love to hear. If, however, he does eventually decide to give the game away, not only will he have his son to look after the cars, he’ll also still be able to enjoy them in other ways, saying that “I just get a kick of out of being in the shed and having a cup of coffee with the cars… And they’re not as noisy as the wife!”
S50B32 straight-six has been fitted with #VAC Vanos delete kit, among many other mods, and now makes 367whp.
Carbon blanking plates are most definitely at home in the stripped-out interior.
“Everywhere you take it, if it doesn’t win, it’s always second or third. It’s a quick little car”
DATA FILE / #BMW / #BMW-E36 / #BMW-M3-R / #Apex / #BMW-M3-R-E36 / #BMW-M3-E36 / #Motec-M600 / #Motec / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-M3-E36
ENGINE AND TRANSMISSION 3.2 litre straight-six #S50B32 / #BMW-S50 / #S50 , #K&N pod filter, custom carbon airbox with OEM runners and custom trumpets, #Schrick 296º cams (inlet and exhaust), #VAC-Motorsports Vanos delete kit, #ARP rod bolts, #NGK spark plugs, #Bosch-440cc /min injectors, Bosch-044 fuel pump, custom swirl pot, #Speed-master fuel cell, Evosport underdrive pulley, Turner Motorsport solid engine mounts, SM Motorsport stepped headers, custom 2.5” stainless steel exhaust and silencer, #Motec-M600-ECU . Five-speed manual gearbox, #AP-Racing twin-plate 7.25” clutch, stock M3 R flywheel, #OS-Giken-LSD
CHASSIS 11x18” ET25 (front and rear) #Apex-EC-7 wheels in Anthracite with 20mm spacers (front and rear) and 280/650 - 18 Hankook slicks (front and rear), #JRZ-RS dampers with #Eibach springs, #Turner-Motorsport (front) and SM Motorsport (rear) anti-roll bars, SM Motorsport custom front suspension arms to increase track by 100mm, #SM-Motorsport custom rear trailing arms, SM Motorsport custom bearings and rod-ends, Whiteline front strut bar, Alcon monobloc four-pot calipers with 355x32mm two-piece slotted rotors and Ferodo DS1.11 pads (front), AP Racing four-pot calipers with 330x28mm two-piece slotted rotors and Ferodo DS2500 pads (rear), AP Racing fluid, SM Motorsport custom braided lines and custom pedal box
EXTERIOR DTM Fiber Werkz wide-body kit (customised by SM Motorsport), custom Topstage Composites front bumper and carbon splitter, #APR-Performance rear wing
INTERIOR Brown Davis roll-cage, short-shift kit, RPM SL S/W Comfort suede steering wheel with quick-release hub, Velo Apex-XL seat, Sparco harnesses, carbon blanking plates for centre console and gauge pod, Racepak displayStream item published successfully. Item will now be visible on your stream.
- Post is under moderationDOUBLE DIP #BMW-E46 / #BMW / #BMW-M3 / #BMW-M3-E46
Ferocious 545hp supercharged and 715hp turbocharged carbon-clad E46 M3s tamed by one owner. Decisions are hard, especially when it comes to choosing between a supercharged E46 M3 and a turbocharged E46 M3, so why not just have both…? Words: Elizabeth de Latour. Photos: Andrew Thompson.
545hp supercharged and 715hp turbo E46 M3s
Decisions are never easy to make, especially when you’re faced with two equally appealing options. Chinese or Indian, for example, or cookies and brownies, or pizza and, well actually there’s no alternative option to pizza because pizza just always wins. Sometimes, you don’t even have to decide, like with cronuts, or a turducken, just have everything, because more of everything is always better. For example, why choose between a supercharged E46 M3 and a turbocharged E46 M3, when you could have both? That is exactly what Jaime Taylor did and we’d like to think that decision made his life immeasurably better in every way.
This man is a serial car buyer and modifier with a car history varied enough to make your head spin, including a midengined, RWD Peugeot 205 GTi and a Sierra Cosworth, a scattering of BMs and some serious big-power builds, such as a 511hp Skyline R34 GTR, a 670hp Skyline R32 GTR and a 513hp Audi RS4. Jaime is no stranger to going fast and is clearly hopelessly addicted and devoted to the modifying lifestyle, which makes him our kind of guy, and we guess answers the question: “What sort of person owns a pair of cars like this?”
What’s really interesting here is that this is really a tale of two parallel builds, which were happening alongside each other at virtually the same time. Spooky. We’ve got Jaime, who wanted to build a turbo E46 M3 but ended up going down the supercharged route, and Andy Bennett, who bought the turbocharged car and proceeded to put a huge amount of effort into getting it running as it should, then ended up selling it to Jaime, who’d actually wanted to buy it all along but was beaten to the punch by Andy all those years previously. It’s a twisting tale deserving of its own movie adaptation, so grab some popcorn, get comfy and we’ll begin.
When Jaime bought his M3 in 2014, it already had a long list of tasty bits on it, including carbon front wings and carbon bonnet, a roll-cage, BBK, CSL air box and Recaro RS seats but even better than that it had been fitted with a new engine from BMW and had covered less than 20,000 miles on it. “The new engine was a blank canvas to work on,” smiles Jaime. “At the time I didn’t know any UK company who could turbocharge the S54 but did know a company in the States. We were talking about shipping the car over there to get the job done, but it would have been gone for six months for all the new fabrication work to be done because they hadn’t done a right hand drive vehicle before,” he explains. “In the end, with a new car on the drive, we decided to go down the supercharged route so then the car could stay local,” and that’s a pretty sensible decision as the job could be done much more quickly and he’d have more time to actually enjoy the car.
The supercharger kit comes from VF Engineering, with Jaime opting for VF570 flavour, the company’s most powerful E46 M3 supercharger offering. At its core is a Vortech V3-Si supercharger, capable of running at 26psi and rated for 775hp, so producing the 570hp and 380lb ft that VF Engineering claims for this kit is a walk in the park. The kit also boasts a cast manifold with a slide-in air/water intercooler cartridge and is a serious setup, able to deliver a huge hike in power. Initially, though, that wasn’t the case, as once Jaime had got the car back from being mapped and stuck it on a dyno he found it was only making 499hp.
“On each of the five back-to-back dyno runs we did the power was going down about 20hp every time because of heat soak,” he explains. “The engine was pulling the timing and it couldn’t make the power. To fi x this we got Gary Adlington, who runs Eastwood Garage in Falmouth, to fit an AEM direct port methanol kit from the States. Gary is a genius,” enthuses Jaime, “he put a Cosworth engine in a boat and some other crazy stuff – incredible character and he also worked on Andy’s engine.” Yes, in a further coincidence, both Jaime and Adam used Gary’s services for their respective projects; it’s like fate brought everything together. With the meth injection kit on board it was time to head back to the dyno and this time the numbers didn’t disappoint. “On the first run it made 513hp, 530hp on the second and we finished with 545hp,” grins Jaime and that grin is fully justified as that’s a serious power figure. Of course, running monster power means you need plenty of supporting mods and this S54 has been treated to a Mishimoto electric fan coupled to a larger Mishimoto rad, a 55ºC thermostat, the secondary air pump has been removed along with the air con and it’s all finished off with set of sport cats and a Milltek rear exhaust section.
Handily, the previous owner had done a lot of the groundwork on the chassis meaning the M3 was already in a good position to be supercharged, but Jaime has been upgrading things along the way over the past two-and-a-half years to make sure the car was the best it could be. The chassis has been enhanced with a set of KW V3 coilovers and is joined by Turner Motorsport top mounts and adjustable Turner anti-roll bars both front and rear. In addition to this there are adjustable rear camber arms, poly bushes fitted throughout and there’s also a 4.10 ratio rear diff. The brakes are seriously beefy and more than up to the task of slowing this powerhouse of an M3; up front there’s an Alcon BBK comprising 365mm discs, utilising Reyland brake bells, clamped by red six-piston calipers and braided hoses and Pagid RS-29 pads have been fitted allround while 710 racing brake fluid tops off the brake upgrades. When it came to choosing wheels, Jaime wanted something light and good-looking that would suit his track-orientated build. “Apex wheels were the weapon of choice,” he says, “they’re lightweight, concave and when I was searching for M3 track cars online everyone was running them so they were clearly the wheels to go for.” He’s gone for the Arc- 8, which looks great on the E46, and he’s running a square setup with 10x18s all-round wrapped in sticky Federal 595RS-R tyres.
No doubt a big part of the appeal of this M3 when Jaime was shopping was the fact that it looked so flipping fantastic, with the carbon bonnet, wings and boot lid really giving it a full-on track look and over the time he’s had the car he’s built on that, giving it an even more extreme appearance. “It was actually booked in to have all the carbon painted,” admits Jaime, “but I ended up going against it and kept the carbon on show for an aggressive track look,” and we’re glad he did. The car also wears a carbon front splitter and canards, plus Jaime has carried out a front foglight delete, and added a carbon rear diffuser, all of which combine to really make this M3 stand out and it’s got a lot of presence.
The interior had already been stripped out and caged-up when Jaime bought the car, but here too there was room for improvement and it all started with the seats. “On the first track day I took the car to I realised the seats were too high as we kept hitting our heads on the roof,” he explains. So out came the Recaro RS seats and in went in a pair of Corbeau Club Sport buckets, and Jaime was now far more comfortable and able to actually enjoy driving his M3. Other interior changes include the aforementioned roll-cage, a Safety Devices bolt-in item, an alcantarawrapped wheel from Royal Steering Wheels, full carbon door cards with red door pulls, an AEM hand controller for the methanol injection, a lightweight battery, fire extinguishers and a carbon blanking plate that covers the hole where the sat nav screen once sat. We love the fact that while it is stripped out and most definitely hardcore, it’s been finished to an incredibly high standard with some very high quality materials, and it all combines to make it even more special.
While Jaime was busy getting stuck into his supercharged E46 M3 project, Andy was well underway with getting his turbo E46 M3 up to scratch. Back in late 2013, having just sold a supercharged Range Rover Sport, Andy was flush with cash and looking to buy a second home to rent out. At least that was the sensible, grown-up plan, but one brief eBay session later it had all gone to pot as he’d spotted a turbo E46 M3, this very car, up for sale and, deciding that he couldn’t not buy it, he snapped it up with a sneaky bid in the final few seconds of the auction, unknowingly swiping it away from Jaime.
Not only did the car have a claimed 650hp, but it had also been on the cover of the March 2008 of PBMW, and came with a vented carbon bonnet, carbon bootlid, BBK and ticked just about every box that there was to be ticked. Quickly, however, it transpired that the car was not in rude health, making only 465hp on the dyno, not the figure Andy had been led to believe, as well as suffering from numerous issues to do with the turbo conversion. It was not a happy car. It was decided that a new intake manifold and stand alone ECU were needed, so Andy took the M3 off the road and put it into storage while he saved money for the work it needed. It was at this time that he learned about the infamous E46 subframe failure issue and, after inspecting the state of his M3, he discovered that, lo and behold, the subframe was not in a good way...
While we can’t imagine his mood was particularly good at this point, Andy had a turbocharged M3 and he was determined to make it the best turbocharged M3 he could; where Jaime started his project with a clean slate, Andy had the perfect opportunity to not just fix what was wrong with his M3, but improve everything as he went along, and he’s definitely done that and then some.
Before he could even think about getting the engine running at full capacity, that rear end needed sorting out so the old boot floor was cut out, a new one was welded-in and Redish Motorsport reinforcement plates were installed, along with a box section welded across the boot floor to eliminate any flex. At the same time, the whole back end was poly bushed and the propshaft rubber donut was replaced by an uprated Revshift polyurethane set up. The poly bushing extends throughout the chassis now and the suspension has been thoroughly upgraded throughout to ensure it’s up to the task of coping with a turbocharged S54 above. Naturally the car sits on coilovers but they’re not the usual suspects, this M3 having been fitted with Tein items complete with electronic damping adjustment, and these are joined by adjustable front camber plates and Eibach anti-roll bars front and rear and there’s also a Strong Strut front brace with a Schnitzer item mounted at the back. A Brembo GT BBK takes care of stopping duties, with six-pot calipers and monster 380mm discs up front and 345mm discs at the rear, the red calipers contrasting perfectly against the black spokes of the 19” CSL replicas, themselves fitted with Toyo R888 tyres for maximum grip and traction. When it came to the engine Andy admits that, without the help and knowledge of Gary Adlington, he probably would have given up on the car a long time ago, which would have been a shame as he would not have had the chance to experience the fury of a fully operational turbo M3. The main components required to get the S54 performing as it should were an AEM Infinity 8 ECU, Horsepower Freaks intake manifold and boost pipe, a pair of HKS SSQV4 blow-off valves and an AEM water/meth injection kit. The intercooler was also sent off to have the end tanks cut off and new ones made from thicker aluminium welded on. The final engine spec makes for some eye-widening reading as some serious work has gone into making this S54 as powerful as it is. The turbo kit itself comes from Savspeed Racing and uses a Turbonetics T70 turbo and the engine has been bolstered with a set of Wiseco low compression pistons, Pauter con rods, VAC Motorsports head bolts and a steel-lined head gasket while twin fuel pumps feed 750cc injectors via an Aeromotive fuel filter. The result of all that is pretty spectacular, with four different power maps to choose from: the mildest map offers a sensible 500hp, which we imagine is handy for popping to the shops for a pint of milk, while the wildest map delivers 715hp, which you’d probably use for getting a pint of milk and some toilet paper. Perhaps a cheeky Snickers as well. A Clutch Masters twin-plate paddle clutch has been added to cope with all that newfound power and there’s also a short-shift kit rounding things off.
As with the supercharged car, this turbo M3 is a riot of carbon fibre on the outside, which looks fantastic against the Steel grey bodywork. It wears a Vorsteiner carbon bonnet and carbon front bumper, carbon front wings, a CSL carbon bootlid, carbon rear bumper, carbon side mouldings, carbon roof spoiler, carbon Schnitzer mirrors, even a carbon fuel filler flap. There are more carbon panels on the car now than there are regular body panels, it’s really something, and makes the car utterly spectacular. The interior is has also been treated to a whole heap of carbon goodies, including dash trim, door pulls, steering wheel trim, steering column and gearknob, gear surround and handbrake lever. It’s a veritable feast for the eyes. In the early stages of the project, Andy picked up some rather sexy Cobra Daytona seats, which were already trimmed in black Mercedes leather and black Mitsubishi Evo X alcantara and finished with gold stitching, and they look great in the car, really filling out the interior and making it a rather more special place to sit. They’re mated to threepoint harnesses, which are mounted where the rear seats used to be, and naturally there’s also a host of gauges, we’d have been disappointed if there hadn’t been what with this being a turbocharged car and all. They include an Innovate AFR gauge, a trio of HKS gauges to monitor boost, exhaust temperature and pressure and there’s also a HKS turbo timer ensuring that the turbo stays healthy.
So, man builds supercharged E46 M3 and buys turbocharged M3, drives off into the sunset, lives happily ever after etc, right?
Well, not quite… “It’s a good job Andy pipped me to the post on the turbo car,” admits Jaime, “as he spent a lot of money on this M3, so I really reaped the benefits of all his hard work. It was a pleasure to scratch that turbo M3 itch that I’ve had for years, watching all those turbo M3 videos on YouTube, and it is fricking awesome,” he grins, but after buying the car from Andy last July just one month passed before Jaime had put it up for sale himself. “I needed to try it out for a while to see if I was happy to make this my new track car, and after testing it back to back with my supercharged one I decided it wasn’t for me. I have a bond with my supercharged one and prefer everything else about it, as does my other half, Terrie, and I have to live with her so she has a big say in what I do,” he laughs. Unsurprisingly the turbo M3 sold very quickly but surprisingly Jaime has now put his supercharged M3 up for sale as well, and as we put the last of these words to paper it looks like it may have found a new home… “I’ll be very sad to see it go,” he says, “and so will Terrie as we’ve both done a lot of track days in it and she’s learned a lot from driving it and really enjoys it,” but that’s just how it goes with modified cars, we suppose, it’s very rare for them to have any sort of permanence and selling the cars we’ve poured so much of everything into is a just part of the life we lead. They do say that it is better to have loved and lost than never to have loved at all, though, and while we’re not sure if Jaime is planning to go as far as this with the E92 M3 he’s thinking of buying next, he can at least say that he’s been the owner of both a turbocharged and a supercharged M3, and there’s not many people that can.
TECHNICAL DATA FILE #Turbocharged E46 / #BMW-M3 / #Turbonetics / #BMW-M3-Turbocharged / #BMW-M3-Turbocharged-E46 / #BMW-M3-Turbo / #BMW-M3-Turbo-E46 / #HKS / #BMW-M3-Tuned / #BMW-M3-Tuned-E46 / #BMW-3-Series / #BMW-3-Series-E46 / #BMW-3-Series-M3 / #BMW-3-Series-M3-E46 /
ENGINE AND TRANSMISSION 3.2-litre straight-six #S54B32 / #S54-Turbocharged / #S54-Turbo , #Savspeed-Racing turbo conversion with #Turbonetics-T70 turbo, #Wiseco low compression pistons, #Pauter con rods, #VAC-Motorsports head bolts, steel-lined head gasket, 750cc injectors, twin fuel pumps, #Aeromotive fuel filter, #AEM Infinity 8 standalone ECU with E46 plug and play harness, AEM water/methanol injection kit with 1000cc and 500cc injectors, #HPF intake manifold and intake piping, custom front mount intercooler, 2x #HKS-SSQV4 blow-off valves, HPF five-way traction control system, custom exhaust system. Six-speed manual gearbox, Clutch Masters twin-plate paddle clutch, short shift kit
CHASSIS 19” #CSL-replica-wheels in gloss black with 235/35 (front) and 265/30 (rear) Toyo Proxes R888 tyres, Tein-coilovers with electronic damping adjustment, adjustable front camber plates, Strong Strut front brace, AC-Schnitzer rear brace, Eibach anti-roll bars (front and rear), fully poly bushed, Brembo GT BBK with six-piston calipers and 380x32mm discs (front) and four-piston calipers with 345x28mm discs (rear)
EXTERIOR Steel grey, #Vorsteiner carbon bonnet and front bumper, carbon fibre front wings, side mouldings, AC Schnitzer carbon fibre door mirrors, CSL carbon fibre boot, carbon fibre rear bumper, roof spoiler
INTERIOR Cobra Daytona seats re-trimmed in black leather and alcantara with gold stitching, three-point harnesses, rear seat delete, black alcantara gear and handbrake gaiters with gold stitching, Innovate AFR gauge, HKS boost, exhaust temperature and pressure gauges, HKS turbo timer
TECHNICAL DATA FILE #Supercharged / #BMW-M3-Supercharged / #BMW-M3-Supercharged-E46 / #S54-Supercharged / #VF-Engineering / #Apex
ENGINE AND TRANSMISSION 3.2-litre straight-six #S54B32 / #S54 / #BMW-S54 , #VF-Engineering-VF570 supercharger kit, AEM water/methanol injection kit, #Mishimoto electric fan, Mishimoto bigger radiator, 55ºC thermostat, secondary air pump removed, airconditioning removed, sport cats, Milltek rear exhaust. Six-speed manual gearbox, 4.10 rear differential
POWER AND TORQUE 545hp, 383lb ft
CHASSIS 10x18” (front and rear) #Apex-ARC-8 wheels with 265/35 (front and rear) Federal 595RS-R tyres, stud conversion kit, 12mm rear spacers, #KW-V3 coilovers with Club spec springs, Turner Motorsport top mounts, #Turner-Motorsport adjustable anti-roll bars (front and rear), adjustable rear camber arms, fully poly bushed, #Alcon BBK with six-piston calipers and 365mm discs with #Reyland bells (front), standard calipers (rear), Pagid RS-29 pads (front and rear), braided brake lines (front and rear), 710 racing brake fluid
EXTERIOR Carbon fibre canards, splitter, front wings, boot, bonnet, rear diffuser, carbon wrap on roof, fog lights removed
INTERIOR Stripped-out, full bolt-in Safety Devices roll-cage, alcantara steering wheel by Royal Steering Wheels, solid steering wheel coupler, full carbon door cards with red pull tabs, RTD short shifter, AEM hand controller for water/methanol injection, Corbeau Club Sport seats, Willans harnesses, water/methanol tank in boot, Odyssey PC950 lightweight battery, fire extinguishers, stereo removedStream item published successfully. Item will now be visible on your stream.
- Post is under moderationGorgeous E46 M3 / Slick E46 slammed, styled and tuned
THE PEOPLE’S CHAMPION / Words: Elizabeth de Latour / Photos: Sunny Ryait
With a perfect blend of styling and tuning mods, this E46 M3 really is the modified package that everyone can enjoy the people’s.
Oh yes, this is what we’re talking about. As much as we love all the air ride, the big wings, the engine swaps, the turbos, superchargers and wild wide-body kits, sometimes you just want something a bit more down to earth, a bit more achievable, affordable, a people’s champion that we can all get behind and enjoy, and Richard Ansari’s E46 M3 is that car. It looks great, that’s going to be your first reaction, because it really does, but as with many seemingly simple builds, there’s a lot more going on here than you might first notice and Richard has really put a lot of love and hard work into his M3 over the past five years.
The E46 M3 dream must have seemed almost unattainable back when Richard passed his test and got behind the wheel of a mighty 1989 Mazda 626. A BMW was going to happen though, there was no doubt about it, thanks to his dad’s decision to run a string of Bavaria’s finest when Richard was growing up, but what really sowed the seed deep down into his brain was the blue E30 325i his dad once owned. “I couldn’t get into BMs right away as soon as I passed my driving test as insurance was one roadblock as well as being a student in my younger years,” he laughs and it wasn’t until he turned 23 that he could finally make that dream a reality. “By pure chance my mate had decided to sell his E30 325i Cabriolet and gave me first dibs on it before advertising it. I knew the car and while it did have some very questionable mods, underneath it all was decent, having had a full respray, no rust, was structurally sound and had cream interior to complement the Zinnober red exterior. It was almost like reliving my childhood with those memories sat in my dad’s E30, but this time I was behind the wheel,” he grins.
Over the next three years the E30 underwent a transformation that saw it ending up with a 2.7 conversion and receiving a feature in these very pages back in March 2007. The E30 was then followed by an E46 330Ci and that path could only lead in one, inevitable direction... “The E46 M3 was a dream car for me,” says Richard, “and when my mate bought one in late 2010 and let me drive it, I made a plan there and then to own one in 2011. I had originally wanted one in Techno violet but, being a very rare colour, it was mission near-impossible to find one, so I started to look at a few other colours as a second option,” he says. That led him to Pistonheads, where he stumbled across this Steel grey Coupé, with a manual gearbox and just 50,000 miles on the clock. Richard grabbed his friend Dips, from Custom Cars, headed over to take a look at the car and ended up buying it. “I wanted to keep this one fairly standard except for a couple of subtle mods, keeping away from doing any more big modifications,” he laughs, “unfortunately, though, once I fitted a set of CCFL angel eyes and black kidney grilles, it was a bit like opening Pandora’s box,” and so we begin…
With the angel eyes and black grilles being joined by a pair of black wing vents, Richard decided to carry on with the styling mods, adding smoked Depo indicators and repeaters and tinting the outer rears to match with Lamin-X film, then sourcing and fitting a set of facelift smoked inner lights. At the rear there sits an AC Schnitzer-style carbon fibre diffuser, which fills out the bumper nicely, along with a genuine CSL bootlid, while up front, a Strassentech-style lip adds an air of menace to proceedings and is joined by a set of Hamann foglight covers, with smoked fogs. Richard says that his plan was to enhance the car’s looks without going crazy, and we have to say he’s most definitely achieved his goal. The styling additions he’s chosen give the M3 a more pumped-up appearance, accentuating its aggressive styling, but without going too far or overwhelming the looks. And, while his first choice of colour may have been Techno violet, we’ve got to say that Steel grey looks really good on the E46 M3.
The suspension has been through a few changes during Richard’s time with the car. He started off small, with just some Apex lowering springs but it wasn’t long before he found himself wanting more adjustment and decided to take the plunge with some coilovers. His first set were from D2 but the car now runs BC Racing coilovers, which offer all the adjustability he could ever want and have allowed him to achieve the perfect ride height. “With the suspension sorted I was looking at big brake kits as the next big upgrade,” he tells us. “For the M3 there are a lot of options and routes you can go down and then, one day, an ad came up for a complete set of AP Racing brakes from Imran at Evolve Automotive. After a quick think, and after checking the piggybank, we did the deal and I picked them up. It did occur to me, not long after that, what would I do if my wheels didn’t have enough clearance, without having to resort to using big spacers, but figured I’d worry about it later. One way or another there was not going be any compromise, so I dropped the calipers over to Dips at Custom Cars to work his magic, turning them from red to orange.
I really like the way they look behind the wheels but beyond that the stopping power is so consistent compared with the OEM setup. I mounted the front wheels to check for clearance and luckily to my surprise only a 5mm spacer was needed,” he says.
As far as the wheels are concerned, Richard didn’t start off small and work his way up to something impressive, he went big right away, kicking things off with a set of AC Schnitzer Type 3 Racing splits, which are a great-looking classic wheel design. But that wasn’t enough for him, he wanted more… “I wanted something a bit special,” he says, “it had to be a three-piece wheel and my ideal choice was a set of Hartge Design C splits, but not only are they rare they also command a huge premium. I wanted something that you don’t see everyday and it had to have friendly offsets, with the aim of building a set of wheels wide enough, without needing any major work to fit straight on and not needing any camber.
After missing out on a set of Oz Futuras, I found some Oz Mitos on German eBay just before whisking my partner off to Marrakech for her birthday; I had an idea of what they looked like on a normal E46 but couldn’t find a set fitted to an M3 anywhere, so I knew this was my opportunity to run something fairly unique. Midway through the holiday, while she was getting ready in our hotel room, I placed a bid just before the auction finished and won,” he grins. Best. Holiday. Ever.
“They were 18s with the right offsets and being the Type 1 version, which are reverse mounted, are pretty rare in a BMW fitment. As soon as they arrived I went down to Dips for a test fit and we worked out what lip sizes to run front and rear. Originally they came as 8.5x18s and 9.5x18s and I really wanted to run an 11” wide wheel at the back, so Dips started the strip down of the wheels for a full refurb. He ordered 3.75” lips for the rear and moved the 2” lips to the front making the new setup 9x18” and 11.25x18”.
We knew an arch roll was needed, so Dips got that sorted and, with fresh Continental tyres fitted, we mounted the wheels. Seeing them built up and fitted on the car I knew I had made the right choice,” he grins. “They just completely changed the way the car looks, but not only that, the fitment is perfect too, with no rubbing or any negative camber required to aid with clearance.”
With the car looking on point as far as styling was concerned, Richard popped his bonnet and took a good, long, hard look at the engine bay. “At first I had no real plans on doing any engine mods,” he admits, “that is until a group buy came up for some Geoff Steel Racing air boxes on the M3 Cutters forum. After reading the feedback on it and with a bit of encouragement from forum members I went ahead and placed a pre-order.”
Usefully, as part of the group buy, Evolve joined in with a special offer on Alpha N remaps to go with the air boxes so, with his sexy new carbon air box fitted, Richard headed up to the company’s Luton HQ to get the car remapped. “These cars make anywhere between 320-330hp on average,” he explains, more than a few ponies shy of BMW’s 343hp claim, “and originally mine made 321hp. After fitting the airbox and mapping it, we saw 349hp, which was a very nice gain and was noticeable on the road. As well as that is the induction noise you get as soon as you floor it. It makes such an awesome roar you never get tired of it and want to hear it more and more,” he says with a grin. “To complement the airbox for sound and for a little extra power, I fitted a set of 100 cell cats paired with an Eisenmann Race rear box, which has given a better throttle response through the rev range. To finish off I got the holy grail of exhaust manifolds, with a set of Supersprints, which very rarely come up for sale. They were brand new but never fitted and I soon snapped them up to complete the setup.”
While he may have been sorted for power, that carbon air box was showing up the rest of his engine bay, so action needed to be taken. Obviously carbon was the way forward, and Richard began to develop a little bit of an obsession with the mesmerising weave. First came an intake cover that fits over the existing item but also partially covers the front of the air box, and once that had been fitted, obsession became unstoppable addiction. Desperate to feed his habit, Richard read up on and briefly considered having a go at carbon skinning, before he found Prapan, who runs NVD Motorsport, and saw his carbon-skinning talent. Quick as a flash, Richard had removed his emissions pump, xenon ballasts and ECU cover and handed them over for skinning in 2x2 weave to match the air box and also asked for a pollen filter cover. The six week wait to get the parts back was absolutely worth it but when it came to getting the rocker cover skinned, the cost of postage and import duty was proving prohibitive.
Richard found himself a slightly more local carbon skinner by the name of Jaydee Customs, over in Poland, who duly skinned the aforementioned rocker cover, leaving Richard with virtually nothing left to cover in carbon. The finishing touch here in the engine bay is a rather sexy and substantial Rogue Engineering strut brace. And now we come to the interior, because of course Richard couldn’t leave that alone either, and we’re glad he didn’t.
Originally, his M3 had been fitted with the black leather interior, nice but a bit plain and, for Richard, lacking contrast against the Steel grey exterior. “I didn’t want to settle for red,” he says, “so I searched for a year until a rare Cinnamon interior came up on E46 Fanatics. It wasn’t a sale but a straight swap for black leather, offered by a chap called Mark who was working for Nitron Racing at the time. So after a brief chat on the phone we arranged for me to come down to him one day and we both swapped out our interiors at the premises. For me it made such a huge difference, not just the fact it was a nicer place to sit in now, but it goes so well with the car.” We have to agree as we’re big fans of coloured interiors, they make such a nice change from the usual dour shades, and Cinnamon is seriously lush.
It’s further complemented by matt dark myrtle wood trim, an unusual choice for an M3 and an extremely rare trim option, but it’s absolutely gorgeous and looks so good here. The steering wheel has been re-trimmed by Royal Steering wheels, with extra padding, cinnamon stitching and a cinnamon centre stripe while the gearknob has been replaced with an illuminated F10 M5 item with matching gaiter, mounted on an E60 short shift for crisper gear changes. Finally, Richard’s most recent interior mod, is the Awron gauge mounted in the driver’s-side centre air vent. “It was a bit of an impulse buy,” admits Richard, “I saw a demo of it on YouTube and when I saw they had made them for the E46 I got one ordered. It goes nicely with the dash and it’s a nice bit of kit, displaying various parameters from intake temperatures to O2 sensor voltages along with a G force meter and loads more functions.”
It’s taken Richard four years to get his M3 to where it is now, and he couldn’t be happier with the result of all that work. “I think where it is now I have found that place where I wouldn’t change much else,” he smiles. “A full respray is on the cards next, in the original colour, and I want to get the map tweaked with the addition of the exhaust mods. But my long term plan if I can is to keep the car and hopefully one day give it to my son,” which would be an amazing gift, and something very special for that young man to hold onto. So, does that mean Richard’s hanging up his modding hat for now? No… “I have an E30 325i Cab which I bought over four years ago as a project car so, with the help of Dips, there are some big plans for it. Watch this space!” he says with a smile and you can be sure we will be.
“… I think where the car is now I have found that place where I wouldn’t change much else”
/ #BMW-M3-E46 / #BMW-M3-Tuned-E46 / #BMW-3-Series / #BMW-3-Series-E46 / #BMW-3-Series-M3 / #BMW-3-Series-M3-E46 / #BMW-M3-tuned-E46 / #BMW-M3-tuned / #Evolve / #BMW / #BMW-3-Series-Coupe / #BMW-3-Series-Coupe-E46
TECHNICAL DATA FILE #BMW-E46 / #BMW-M3 / #OZ
ENGINE AND TRANSMISSION 3.2-litre straight-six #S54B32 / #S54 / #BMW-S54 , #Geoff-Steel-Racing carbon fibre air box, #Evolve-Alpha-N remap, #Supersprint-V2 exhaust manifolds, 100 cell race cats, #Eisenmann Race rear exhaust section with 83mm tail pipes, carbon fibre engine cover, emissions pump cover, ECU cover, xenon ballasts and pollen filter cover, Matt Haley billet aluminium oil filter cover, #Rogue-Engineering one piece strut brace. Six-speed manual gearbox
CHASSIS 9x18” (front) and 11.25x18” (rear) three-piece #Oz-Mito wheels with 225/40 (front) and 255/35 (rear) Continental ContiSportContact 3 tyres, #CA-Automotive stud conversion kit with Motorsport Hardware wheel nuts, BC Racing BR series coilovers, Revshift 80a subframe bushes, #AP-Racing-BBK with six-pot calipers and 356mm discs (front) and four-pot calipers and 328mm discs (rear), custom orange calipers
EXTERIOR Original Steel grey paintwork, Strassentech-style front lip with carbon fibre insert, Hamann fog light covers, smoked fog lights, black kidney grilles, black wing vent grilles, 4000K CCFL angel eyes, Depo smoked indicators and side repeaters, carbon fibre black and white bonnet and boot roundels, AC Schnitzer carbon fibre rear diffuser, OEM CSL boot lid, Lamin-X smoked rear lights, Eagle Eyes smoked inner boot lights
INTERIOR Full cinnamon interior swap, matt dark myrtle wood trim, re-trimmed padded steering wheel with cinnamon stitching and cinnamon centre stripe, F10 M5 gear knob and gaiter, E60 V8 short shift kit, Awron digital vent gauge
THANKS Dips at Custom Cars for his input and direction over the years, Teddy at SSDD Motorsport, Prapan at NVD Motorsport, Jaydee Customs, John at carbolts.co.uk, Evolve Automotive, Alex at Elite Car Care, Jack at Royal Steering Wheels, all my friends, family and my understanding wife for supporting my passion for cars over the yearsStream item published successfully. Item will now be visible on your stream.
- Post is under moderationFIRE LIGHT
Shafique Bhimani’s E36 M3 has been on an extensive fitness programme, fusing the philosophy of BMW’s fi nest lightweights with properly capable road-and-track ability. This thing is fi t, legit, and fully lit… Words: Daniel Bevis. Photos: Courtney Cutchen.
S54-swapped E36 M3 wide body bruiser
The love child of a Euro-spec E46 M3 CSL and a #US-spec E36 M3 Lightweight. That was Shafique Bhimani’s over-arching vision for this Alpine white E36. Sound lofty? Ambitious? Unachievable? On paper, perhaps, but his clarity of perception has led to a unique creation that more than justifies the ‘CSL E36’ license plates.
“I fell in love with the E36 M3 before I could even drive,” he enthuses. “It’s the car that took me into the deep end, and caused me to waste so much unproductive time learning about cars and modifying them! Something about the boxy, sharp lines that portrayed an aggressive yet elegant look - plus the fact that it punched above its weight and outperformed more powerful cars was hugely appealing. Once I learned of the E36’s DNA and how it came it to be from all of BMW’s motorsport history, I was hooked on the brand. BMW became my team, and you don’t just change teams.”
Yes, we can fully understand that, and having got a bit of modifying practice in with a variety of other cars, Shafique felt that the time was right in 2009 to take the plunge and buy himself an E36 M3 of his very own. The example in the crosshairs had 54k on the clock and was in pristine condition… Oh, and it just so happened to have 380whp with a Vortech supercharger hanging off it. A quick once-over was all it took to get the grey cells banging together, and the lightweight concept was already forming in his mind – so shortly afterwards Shafique bought an ’07 335i as well, just to use as a daily driver so that there was no doubt as to the E36’s fate. This was going to be done properly, entirely without compromise and so, eyes open, he dove in.
“For what these cars cost me, I could have easily purchased a heavily modified E46 M3, or even a new E92 M3 at that time,” he points out, “but I wanted to fulfil a dream I had held for so long. When time, money and opportunity presented themselves, all I wanted was a white, straight-six E36 M3.” Heart, we reckon, should always rule head. Life’s too short to let your dreams die.
Shafique’s shopping list had been quite specific: the additional displacement of the 3.2-litre engine narrowed his search to ’96-’99 cars, and it had to be either Alpine white or Estoril blue – preferably the former, for the BMW Motorsport look. Forced induction was also preferable, whilst still being realistically streetable. This car, located in SoCal rather than his Bay Area hometown, ticked all the boxes. “It quickly became obvious, however, that I wouldn’t be able to exploit all that power on the street without risking either other people or my driving license, so I went on a track day at Sonoma Raceway and I was instantly hooked,” he recalls. “It was an eye-opening experience, and I realised the track was the safe, responsible playground for my car. I also quickly realised the car was not set up for track duty!” Coolant leaks and slipping belts convinced Shafique that his game needed tightening up, and he devoted time to wandering around the paddocks and seeing how the other gearheads approached things. And you know what he discovered? Big boost and stratospheric power levels were nobody’s main angle of attack – it was all about setup, usability, tactility, and durability. He felt very strongly that a naturally aspirated straight-six was the way to go. And what better choice than the E46 M3’s S54?
With this seismic decision made, the E36 was shipped off to Castro Motorsport in Los Angeles to swap in the later motor, and subsequent setup was taken care of in painstaking increments by Dublin, CA-based Performance Technic. “We methodically upgraded each system of the car over the years, and today she is a fully-prepped track weapon that can be driven to and from the track with A/C and tunes blasting,” Shafique beams. “It’s my definition of an uncorrupted driving experience, front-engine/rear-drive, hydraulic steering, limited-slip diff, and a screaming straight-six.”
So let’s take a closer look at just how this mighty spec has been achieved. This S54 produces a solid and reliable 341hp at the wheels, its stock internals being complemented by Epic Motorsport race headers and a custom Performance Technic 3.5” exhaust system, along with a Bimmerworld carbon-fibre air box. Thanks to some ones-and-zeroes tickling in the form of an RK-Tunes Alpha-N tune, power and reliability are both baked right in. It’s not scary-fast, it’s useably fast, and a lot of that swiftness is thanks to a favourable power-to- weight ratio. MCS two-way adjustable suspension and big StopTech brakes combine with a welded-in six-point half-cage with rear strut tower braces, while a rear seat delete, grippy Recaros and a tasty Renown USA steering wheel serve to create a fabulously focused office for Shafique.
“My motto for the build has been to go fast, but look good doing it,” he says. “Function plus form. It was a team member from PTech who introduced me to the Felony Form overfender kit and, well… This is a sensitive subject for me: I love the OEM lines of a stock-body E36, they’re clean and simple, and more often than not aftermarket companies ruin what engineers spent millions to design. Over the years there have been a bunch of wide-body options, but I never loved any of them until I saw the Stanceworks feature on Oli’s yellow E36.
After spending days staring at this kit, I was in love with the E30 M3-esque box flares in the rear, and the OEM-looking front flares. It’s exactly what I was waiting for, OEM on steroids! PTech handled the delicate task of cutting up and re-welding the factory arches to accommodate the flares and big wheels, and RJ’s Paint Shop in Pleasanton, CA did a fantastic job of paint-matching the factory Alpine White.”
The form-and-function approach is very much in evidence from the outside, the Felony Form extensions blending in harmony with the M3 Lightweight aero addenda. The Lightweight, if you’re not familiar, was a limited-run E36 distinguishable by its tall rear spoiler, modified and lightened for motorsport purposes; the door skins were aluminium, there was no radio, carpets were thinner, speed limiter removed, revised axle ratios, forged wheels… It was as much of a legend Stateside as the iconic E46 M3 CSL was in Europe, and it’s the ethos of these two superlightweight factory-modded offerings that Shafique’s sought to emulate. This M3 now weighs 1440kg wet, and that includes the 40kg roll cage. This offers a power-to-weight ratio akin to a Lotus Elise, and remember that it still has a stereo and air con for the journey home.
“The interior is a driver-centred style,” Shafique says. “‘Track setup’ was the priority, then adding what flair I could with the Alcantara steering wheel, armrest, and handbrake. There’s a #BMW Nav Pro head unit by Becker which offers the OEM navigation system only available in the Euro market, Bavsound speaker upgrade, and useful mods like a shift-light from MSD to help keep things in check; the car uses the factory E36 gauge cluster, the redline beginning at 6500rpm and going to 8000rpm, which has effectively become my power band - so having a light flash you in the face is very helpful during hot laps! And the CAE shifter from Hard Motorsport is epic – it transforms the shift feel to something very firm and notchy with zero slop, and the tall knob becomes especially fun on track when you are grabbing the wheel and gears back and forth.”
It’s taken seven years for the car to get to this point, through its various stages of evolution, from schoolboy dream to hardcore track beast, and Shafique’s still making plenty of plans for it. Once you get this deep into a project, there’s just no pulling yourself out, even if you wanted to. Which, of course, he doesn’t, as he’s fully living the dream with this considered approach to road-and-track fireworks.
With so much altered on the car, what do you suppose is his favourite element of the build so far, then? The S54 swap? Those wide three-piece Livery wheels? The unique arches, slathered in Alpine White? “No, I think the party piece is the induction roar,” Shafique smiles. “The S54 loves to rev, and combined with the carbon-fibre air box creates a deep roar that turns into a scream from 7-8k rpm, and no other engine on the planet sounds anything like it!” You see, this is a driver’s car. That’s the point of it. And when it enraptures all of the senses at once like this, you know the job’s been done right.
DATA FILE #S54-swapped / #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #BMW-M3-Performance-Technic / #BMW-M3-Performance-Technic-E36 / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series-Coupe / #BMW-3-Series-M3
ENGINE AND TRANSMISSION 3.2-litre straight-six #S54B32 / #S54 / #BMW-S54 , stock internals, Bimmerworld carbonfibre air box, #Epic-Motorsports race exhaust manifolds, custom #Performance-Technic 3.5” exhaust system, #RK-Tunes #Alpha-N tune. #ZF five-speed manual gearbox rebuilt by #Bimmerworld , rebuilt OEM diff with 80% lock and 3.64 final drive, #Rogue finned diff cover
POWER & TORQUE 341whp and 268lb ft wtq @ 8,200rpm redline (on 91RON fuel)
EXTERIOR Alpine white, Felony Form wide-arch kit, M3 Lightweight front splitter, DTM #BMW-M3-FiberWerkz carbon fibre side skirt extensions, #Mateo-Motorsports rear diffuser, carbon fibre replica M3 Lightweight rear wing, roof vinyl-wrapped flat black, fog lamp delete
INTERIOR #Recaro-SPG driver seat, Recaro PP passenger seat, Schroth sixpoint harnesses, Renown USA Alcantara and M-stitched steering wheel with quick-release, custom PTech rear seat delete, custom weld-in six-point half-cage painted flat black with subframe and strut tower reinforcements, sunroof cassette removed, custom black cloth headlining, MSD shift light, CAE shifter, RallyRoad.net Alcantara armrest and handbrake, custom PTech carbon-fibre shift plate
THANKS Special thanks to Performance Technic, the team there has been so integral in bringing my build to where it is todayStream item published successfully. Item will now be visible on your stream.