Finding groups near you ...

Featured Groups

Groups

  1.   Porsche
  2.    Public
Porsche 912 Club first gen pre-impact bumpers 912 (1965-1969) In the early 1960s, Porsche was planning to discontinue the Type 356, which would leave them with the newly-introduced Type 911 as ...
Porsche 912 Club first gen pre-impact bumpers

912 (1965-1969)

In the early 1960s, Porsche was planning to discontinue the Type 356, which would leave them with the newly-introduced Type 911 as their only product. Concerned that the considerable price increase of a 911 with flat opposed six-cylinder powerplant over the 356 would cost the company sales and narrow brand appeal, in 1963 Porsche executives decided to introduce a new four-cylinder entry-level model. Like the 911 (original internal factory designation "901"), the four-cylinder 912 was originally known at Zuffenhausen by a number with a zero in the middle, but the "902" designation was never used publicly. ("912" as project number was used after 1968 to indicate the 12 cylinder flat opposed engine developed for Porsche 917 racing car)

In 1963, Porsche assigned Dan Schwartz, later Chief Departmental Manager for Development, Mechanics, a project to oversee design and construction of a new horizontally-opposed four-cylinder engine for the 902, utilizing components from the new 901 six-cylinder engine, that would produce higher performance than their 356SC engine, and be less costly and complex than their Carrera 2 engine. Another option explored by Claus von Rücker was to increase displacement of the 356 Type 616 engine to 1.8 liters, add Kugelfischer fuel injection, and modify both valve and cooling systems. Considering performance, cost, and scheduling, Porsche discontinued both of these design projects, and instead developed a third option, to tailor the 1.6 liter Type 616 engine to the 902.

Before 911 production commenced in 1964, the Porsche Vehicle Research Department had set aside chassis numbers 13328, 13329, 13330, 13352, and 13386 through 13397 for research testing of the 902; research vehicle Serial Number 13394 is the oldest 902 known to exist today. In production form, the Type 912 combined a 911 chassis / bodyshell with the 1.6L, four-cylinder, push-rod Type 616/36 engine, based upon the Type 616/16 engine used in the Type 356SC of 1964-1965. With a lower compression ratio and new Solex carburetors, the Type 616/36 engine produced five less horsepower than the 616/16, but delivered about the same maximum torque at 3,500 rpm versus 4200rpm for the 616/16.

Compared to the 911, the resulting production Type 912 vehicle demonstrated superior weight distribution, handling, and range. To bring 912 pricing close to the 356, Porsche also deleted some features standard on the 911. As production of the 356 concluded in 1965, on April 5, 1965 Porsche officially began production of the 912 coupé.

Styling, performance, quality construction, reliability, and price made the 912 a very attractive buy to both new and old customers, and it substantially outsold the 911 during the first few years of production. Porsche produced nearly 30,000 912 coupé units and about 2500 912 Targa body style units (Porsche's patented variation of a cabriolet) during a five-year manufacturing run.


Porsche 912 Targa

Production of the Targa, complete with removable roof and heavy transparent plastic rear windows openable with a zipper (later called 'Version I' by Porsche and the 'soft-window Targa' by enthusiasts), commenced in December 1966 as a 1967 model. In January 1968, Porsche also made available a Targa 'Version II' option ('hard window Targa') with fixed glass rear window, transforming the Targa into a coupé with removable roof.

The 912 was also made in a special version for the German autobahn police (polizei); the 100,000th Porsche car was a 912 Targa for the police of Baden-Württemberg, the home state of Porsche.

In the April 1967 edition, the Porsche factory's Christophorus Magazine noted: "On 21 December 1966, Porsche celebrated a particularly proud anniversary. The 100,000th Porsche, a 912 Targa outfitted for the police, was delivered." Porsche executives decided that after the 1969 model year, continuation of 912 production would not be viable, due to both internal and external factors. First, production facilities used for the 912 were reallocated to a new 914-6, a six-cylinder high performance version of the Porsche 914, Porsche-Volkswagen joint effort vehicle. Second, the 911 platform had returned to Porsche's traditional three performance-level ladder, including a most powerful 911S, a fuel-injected 911E, and a base model 911T, with pricing largely in line with market expectations. Third, more stringent United States engine emission control regulations also had a bearing on the decision; Ferry Porsche stated "It would have taken some trouble to prepare the 912 for the new exhaust rules, and with the arrival of the 914 we would have had three different engines to keep current. That was too many.
  1.   Austin
  2.    Public
Manufacturer Austin (BMC)
Production 1956–1959 (saloon)
1956–1962 (estate)
1956–1968 (van)
  1.   Jaguar
  2.    Public
Jaguar XF (X250) 2007-2015
  1.   Volkswagen
  2.    Public
Third generation 2008-2017 Volkswagen Scirocco Typ 13 MkIII
  1.   Ford
  2.    Public
Ford Cortina Mk3 /Taunus TC
  1.   Nissan
  2.    Public
Nissan Datsun Sunny Truck B120 series
  1.   Fiat
  2.    Public
2007 - 2014 Fiat 500
  1.   Mercedes
  2.    Public
Mercedes-Benz CLK C209
  1.   Land Rover
  2.    Public
Land Rover Defender
  1.   MG
  2.    Public
MG Q-Type 1934
  1.   Toyota
  2.    Public
Toyota MR2 Roadster W30 third-generation
  1.   Toyota
  2.    Public
Toyota Supra JZA80 MkIV 1993-2002
  1.   KIA
  2.    Public
Kia-Stinger
  1.   Vauxhall / Opel
  2.    Public
1970 - 1975 The Manta A was released in September 1970, two months ahead of the then new Opel Ascona on which it was based. A competitor to the Ford Capri, it was a two-door "three-box" coupé, and fea...
1970 - 1975 The Manta A was released in September 1970, two months ahead of the then new Opel Ascona on which it was based. A competitor to the Ford Capri, it was a two-door "three-box" coupé, and featured distinctive round tail lights, quite similar to those on the Opel GT and which in fact were used on the GT in 1973, its final model year. It took its name, and a few minor styling cues, from the Manta Ray concept car (1961), which also famously influenced the 1968 Chevrolet Corvette C3 (both Chevrolet and Opel have General Motors as their parent company).

In the UK market, the first Manta was sold only as an Opel: there was no Vauxhall-branded Manta (or Ascona) until after the launch, in 1975, of the Manta B1 and Ascona B. (In the UK the Ford Capri niche was contested, with only limited success, by Vauxhall's Firenza, based on the ageing Vauxhall Viva until 1975.)

The sales approach for the Opel line in the U.S. market was equally unusual. The Manta A was one of only a few Opel models sold in the U.S. Opels were imported by GM and sold through Buick dealerships and not their own dealership network, so they were limited in what makes and models they could sell there. Other Opel models sold in the U.S. were the 1956–1961 the Rekord P1 and Rekord P2, the Kadett A (1964–1966), Kadett B (1967–1971), GT (1969–1973), and the Manta / Ascona A (1971–1975). The Ascona A was the saloon version on the Manta A chassis and was sold in the U.S. under the "1900" name as a two-door and four-door saloon, and as a two-door "sport wagon". The only difference between the Ascona and Manta was exterior sheet metal, glass and trim. The frame, all the mechanicals, dash, front seats, and many other parts were shared between the cars. The Manta was even sold as the "1900 sport coupé" in 1971 and 1972, rather than as the "Manta". In 1973, the Manta nameplate was added to the U.S.-spec Mantas, but the Asconas kept the 1900 badge throughout their model life. The last year GM imported European-made Opels into the United States, under their marque, was 1975. In that year the only Opels imported were the Manta and Ascona A.

The Manta was normally equipped with 1.6 or 1.9-litre CIH engine, although in Europe a small, 1.2-litre, motor was also offered. All Mantas sold in the U.S. had the 1.9 L and larger heavy duty radiator (an option on European models). It came with either a four-speed manual or an optional three-speed TH-180 automatic. The Manta was known to be one of the best-handling cars in its class and went on to win a large number of rallies in Europe and the United States.

In the U.S. market, there was a sport model known as the "Rallye" from 1971 to 1974. The Rallye model was, overall, an appearance and gauge package, the most noticeable difference was the addition of a black hood and, on 1970–1973 models, the addition of fog lamps. Mechanically, the only difference was the gear ratios in the models with manual transmissions, and the Rallye model came with standard stiffer suspension, a tighter turning radius, and very aggressive front caster adjustments. Both had dual rear sway bars, providing exceptional handling.

In 1973 and 1974 there was also the "Luxus" model, which included refinements like corduroy seats, colour-coded interiors (blue or burgundy), and faux wood panelling. The only special edition Manta ever produced for the U.S. market was the "Blue Max", in 1973. This amounted to a blue 1973 Luxus model, with a unique dark blue vinyl roof, mechanical sunroof, and automatic transmission.

In 1975, all Manta and 1900 models were equipped with the Bosch L-Jetronic fuel injection in the United States due to emission regulations. Yet in Europe this feature was only available on the high-end GT/E models, which also sported fog lamps and lower front spoilers, which were not offered on any of the U.S. spec Manta models. Also of note is that the 1974–75 Opel Manta models had large aluminium 5 mph (8 km/h) bumpers to comply with U.S. crash standards of the time; the European Mantas did not receive the large bumpers.

With the Deutsche mark becoming stronger, and with other costs also rising, U.S. imports of Opels ended in 1975. Instead, the Isuzu Gemini version of the T-car was imported from Japan and sold by Buick dealers as the "Opel by Isuzu", later "Buick Opel". The Opel name was last used in the U.S. in 1979.[2]

The European market had a number of different versions. Most were basic trim packages, the most popular being the "Berlinetta", which was similar to the Luxus but included rubber trim on the bumpers (standard on all 1973 U.S. Opel Mantas), vinyl roof, and other miscellaneous features. The one exception was the 1975 Opel, which offered the GT/E and a number of special editions based on the GT/E. The GT/E was a fuel-injected version of the European 1.9L and the performance figures were very impressive for the time. The most notable special editions models based on the GT/E were the "Black Magic" (with black and plaid interior) and the "Swinger" edition in white, also with an odd interior choice.

Special Opel Manta A-series cars

There were two different special models made of the Manta A. The primary objective was to increase the power of the car. Both projects started approximately at the same time (around 1972 or 1973). There was the Turbomanta and the TE2800.

The Turbomanta is the rarer of the two. Production was a total of 33 cars, with five of them being prototypes and the ones used for public relations.

The Turbomanta was actually a 1973 SR with a 1.9-litre "S" spec engine, originally putting out 90 bhp (67 kW). The British company Broadspeed was chosen to build the turbo cars, and eventually started building five left-hand drive cars for the German Opel AG. These cars were meant only as prototypes. Broadspeed came up with a somewhat special solution, and used a combination of a Holset 3LDG turbocharger, and a carburettor mounted inside a big plenum chamber. The engine itself was fitted with a thicker copper head gasket, and as such the compression ratio was lowered to 7.6:1. The outcome was a 1.9-litre engine which generated 156 bhp (116 kW), with acceleration of 0–60 in 7.6 seconds. All five cars were in GM's "signalgelb" sunflower yellow, and had large black stripes on the side, where a sign said "Turbomanta". The downside to this was fuel consumption. The turbocharger had halved the economy of the car, and building it was also costly. Therefore Opel closed the project, leaving the five cars as the total production number. However a British engineer at the Dealer Opel Team (D.O.T.), which was the British importer and builder of Opel cars in Britain, was so enthusiastic about the cars that he had D.O.T. build an additional 28 cars. The cars were all based on the 1974 luxury Berlinetta model, with full gauge packs, automatic transmissions, and alloy wheels. All 28 cars were black with vinyl roofing. The only thing identifying that the car was indeed a Turbo Manta was a small sign at the rear quarter of the rear wings saying "turbo". Very few of these cars still remain today.

The TE2800 was a totally different project that Opel refused to endorse. A Belgian company called Transeurop Engineering also wanted to increase the engine power of the Manta A. Opel had previously tried a six-cylinder engine layout in 1971 and 1972, but with no success. The cars were deemed too expensive to build, and the market was overwhelmed at the time with big engine cars. But Transeurop Engineering did not agree, and a 2.8-litre CIH-type engine was essentially taken from the Opel Commodore 2.8GS model and fitted into the engine bay of the Manta 1.9SR. The radiator, the bonnet, the entire front end of the car, the rear axle, and the transmission all needed to be changed. To solve this quickly, Transeurop Engineering tried to get Opel to join the project using Opel's earlier experiences with the transformation, but with no success. Even worse for Transeurop, Opel did not even want the Opel brand on the cars if the project ever got off the ground. Transeurop Engineering therefore turned to Opel's best tuner of the time, Steinmetz. They supplied a new fibreglass bonnet with a large bulge on it to make room for the engine, a set of widened arches, and a special front bumper integrated with the lower front spoiler, all to make room for the dramatic changes that needed to be made to the car's front end construction. Much of the front was cut out and replaced with other parts being mounted further to the ground in order to give room for the radiator. A closed radiator system was installed so that the radiator had a water tank in the engine bay (like modern cars). The engine was still the 2.8-litre unit from the Commodore GS and this was originally fitted with two Zenith carburettors. The output was 142 bhp (106 kW), and with the Commodore four-speed manual gearbox and a 3.18:1 rear axle the car went from 0–60 mph in 7.5 seconds. A total of 79 cars were made and sold through Steinmetz in Germany, branded not as Opels but as TE2800s. All Opel badging was removed from the cars and replaced by the "TE" logo.

Steinmetz offered a tune-up for rally and motorsport use. The tuning consisted of porting and flowing the head, a higher compression ratio, a race spec camshaft, and triple carburettors, giving the car up to 230 bhp (172 kW).

Although the TE2800 is the fastest Manta A ever made, it is not officially an Opel. It could outrun cars like the 911 Carrera of 1973 and the BMW2002 turbo from 1973, even though those cars had more engine power. The low weight of the Manta bodyshell and the combination of the right gear ratios was what gave the car its success. However, the cars were very expensive, almost twice the price of a 105 bhp (78 kW) GT/E in 1975. Very few of these cars exist today, as most were used in rally and motorsport events.
  1.   BMW
  2.    Public
BMW X5 G05 2018-2024
  1.   Audi
  2.    Public
Typbezeichnung F5 Audi A5 F5 second generation
  1.   Fiat
  2.    Public
Fiat Barchetta 1995-2002 / 2004-2005 The Barchetta was developed between 1990 to 1994, under the project name Tipo B Spider 176. It was designed by Andreas Zapatinas and Alessandro Cavazza, under t...
Fiat Barchetta 1995-2002 / 2004-2005

The Barchetta was developed between 1990 to 1994, under the project name Tipo B Spider 176. It was designed by Andreas Zapatinas and Alessandro Cavazza, under the supervision of Peter Barrett Davis and other car designers at the Centro Stile Fiat, and prototyping was carried out by Stola.

Production began in February 1995 and lasted until June 2005, with a brief pause, due to the bankruptcy of coachbuilder Maggiora. The Barchetta was based on the chassis of the Mark 1 Fiat Punto. The Barchetta has 1,747 cc DOHC petrol engine fitted with variable camshaft timing, used for the first time in a Fiat production car, after being patented in 1970.

The engine has 132 PS (97 kW; 130 hp) and 164 N⋅m (121 lb⋅ft) of torque. The Barchetta weighs 1056 kg (2328 lb) without air conditioning and can accelerate to 100 km/h (62 mph) in 8.9 seconds and has a top speed of 200 km/h (124 mph).

It came in various trim levels which offered different features, for example, diamond cross stitch, patterned red leather instead of the standard black leather or fabric seats, alloy wheels instead of steel wheels, or fog-lights as an option. Arguably one of the biggest external cosmetic changes was made by the addition of the third brake light, first introduced by Fiat on the Lido and Riviera in 2000, and on sub models thereafter.

The Barchetta was revised in August 2003, for its relaunch the following year, with some alterations inside and out. The most notable changes were the revised front spoiler and rear bumper. Production of the car eventually stopped in June 2005.
  1.   Toyota
  2.    Public
XW20 Presented at the April 2003 New York International Auto Show, for the 2004 US model year, the Prius was completely redesigned. It became a mid-size liftback, sized between the Corolla and the Cam...
XW20 Presented at the April 2003 New York International Auto Show, for the 2004 US model year, the Prius was completely redesigned. It became a mid-size liftback, sized between the Corolla and the Camry, with redistributed mechanical and interior space significantly increasing rear-seat legroom and luggage room. The second generation Prius is more environmentally friendly than the previous model (according to the EPA), and is 6 inches (150 mm) longer than the previous version.

Its more aerodynamic Kammback body balances length and wind resistance, resulting in a drag coefficient of Cd=0.26. The development effort, led by chief engineer Shigeyuki Hori, led to 530 patents for the vehicle.

Production commenced in August 2003 at the Tsutsumi plant in Toyota, Aichi, supplemented in October 2004 with the Fujimatsu plant at Kariya, Aichi.

The Prius uses an all-electric A/C compressor for cooling, an industry first. Combined with a smaller and lighter NiMH battery, the XW20 is more powerful and more efficient than the XW10. In the US, the battery pack of 2004 and later models is warranted for 150,000 miles (240,000 km) or 10 years in states that have adopted the stricter California emissions control standards, and 100,000 miles (160,000 km) or 8 years elsewhere. The warranty for hybrid components is 100,000 miles (160,000 km) or 8 years
  1.   Ford
  2.    Public
Ford Fiesta Mk8 B479 2017-2021
  1.   Volkswagen
  2.    Public
2018-2024 Volkswagen Touareg III Third generation The third generation Touareg will use the Volkswagen Group MLB platform like its corporate siblings, the Porsche Cayenne and Audi Q7. The third genera...
2018-2024 Volkswagen Touareg III Third generation The third generation Touareg will use the Volkswagen Group MLB platform like its corporate siblings, the Porsche Cayenne and Audi Q7. The third generation Touareg will emphasize the latest in fuel saving technologies and will reportedly be significantly lighter than the first two generations. VW has discontinued the Touareg for sale in the USA after the 2017 model year onward, based on sales, and on the availability of the larger and less expensive Atlas model which was specifically designed for US consumers' tastes.
  1.   Audi
  2.    Public
Fifth generation C8 4H - 2018-2022
  1.   Volvo
  2.    Public
Second generation Volvo V60
  1.   Maserati
  2.    Public
Quattroporte III/Royale AM330, 1979-1990 The third generation Maserati Quattroporte (Tipo AM 330) was developed under the Alejandro de Tomaso-GEPI ownership. After the brief parenthesis of the Citr...
Quattroporte III/Royale AM330, 1979-1990

The third generation Maserati Quattroporte (Tipo AM 330) was developed under the Alejandro de Tomaso-GEPI ownership. After the brief parenthesis of the Citroen-era front-wheel drive Quattroporte II, the third generation went back to the classic formula of rear-wheel drive and large Maserati V8 engine. It was designed by Giorgetto Giugiaro.

History

During 1976, Giorgetto Giugiaro presented two Italdesign show cars on Maserati platforms, called the Medici I and Medici II. The latter, based on Maserati's Kyalami coupé, had features that would make it into the production version of the third-generation Quattroporte.


Maserati Medici II

A pre-production Quattroporte was introduced to the press by Maserati president Alejandro de Tomaso on 1 November 1976, in advance of its début at the Turin Motor Show later that month. It was only three years later though, in 1979, that the production version of the car went on sale.

Initially, the "4porte" badging was used, but changed in 1981 to Quattroporte. Two versions of the V8 engine were available: a 4,930 cc one producing 280 PS (206 kW; 276 bhp), and a smaller 4,136 cc engine producing 255 PS (188 kW; 252 bhp) — later 238 hp (177 kW; 241 PS), which was phased out in 1981. The interior was upholstered in leather and trimmed in briar wood. The Quattroporte III marked the last of the hand-built Italian cars; all exterior joints and seams were filled to give a seamless appearance. From 1987 the Royale superseded the Quattroporte.

Maserati Royale

On 14 December 1986, Maserati's 60th anniversary as a car manufacturer, De Tomaso presented the Maserati Royale in Modena, a built-to-order, ultra-luxury version of the Quattroporte. It featured a higher compression 4.9-litre engine, putting out 300 PS (221 kW; 296 bhp). Besides the usual leather upholstery and veneer trim, the passenger compartment featured a revised dashboard with analogue clock, four electrically adjustable seats, retractable veneered tables in the rear doors, and a mini-bar. Visually, the Royale was distinguished by new disc-shaped alloy wheels and silver-coloured side sills. De Tomaso announced a limited run of 120 Royales, but when production ceased in 1990 only 53 of them had been made.

In all, including the Royale, 2,155 Quattroporte IIIs were produced.

Specifications

Interior

The third generation Quattroporte used an all-steel unibody structure. The chassis was related to that of the Maserati Kyalami, in turn derived from the De Tomaso Longchamp and therefore ultimately related to the De Tomaso Deauville luxury saloon. Front suspension was of the double wishbone type, with single coaxial dampers and coil springs and an anti-roll bar. The rear axle used a peculiar layout very similar to Jaguar independent rear suspension. Each cast aluminium hub carrier was linked to the chassis only by a single lower wishbone, the half shafts doubling as upper control arms, and was sprung by twin coaxial dampers and coil springs units. Rear brakes were mounted inboard, the callipers bolted directly to the housing of the differential. The entire assembly was supported by a bushing-insulated crossbeam. Initially a Salisbury-type limited slip differential was used; in 1984 it was replaced by a more advanced Gleason-licensed Torsen - or "Sensitork" in Maserati parlance.

The engine was an evolution of Maserati's own all-aluminium, four overhead cam V8, fed by four Weber carburettors. The automatic transmission initially used was a three-speed Borg-Warner automatic transmission, soon replaced by a Chrysler A727 "Torqueflite" gearbox. Manual gearboxes were ZF S5 five speeds. When leaving the factory all 4200 Maseratis were originally fitted with Pirelli Cinturato 205VR15 tyres (CN72)
  1.   Chevrolet
  2.    Public
The Chevrolet Corvette C4 was a sports car produced by Chevrolet from 1983 to 1996. The convertible returned, as did higher performance engines, exemplified by the 375 hp (280 kW) LT5 found in the ZR-...
The Chevrolet Corvette C4 was a sports car produced by Chevrolet from 1983 to 1996. The convertible returned, as did higher performance engines, exemplified by the 375 hp (280 kW) LT5 found in the ZR-1. In early March 1990, the ZR-1 would set a new record for the highest 24 hour-5,000 mile land-speed by going over 175 mph (282 km/h).

Prices rose and sales declined, in spite of a completely new chassis, modern sleeker styling, and other improvements to the model. The last C4 was produced on June 20, 1996
  1.   Maserati
  2.    Public
2003-2012 Maserati Quattroporte V M139 The fifth generation of the Quattroporte (Tipo M139) was unveiled to the world at the Frankfurt Motor Show on 9 September 2003 and made its U.S. première at the ...
2003-2012 Maserati Quattroporte V M139 The fifth generation of the Quattroporte (Tipo M139) was unveiled to the world at the Frankfurt Motor Show on 9 September 2003 and made its U.S. première at the 2003 Pebble Beach Concours d'Élégance; production started in 2004. Exterior and interior design was done by Pininfarina. Built on an entirely new platform, it was 50 cm (19.7 in) longer than its predecessor and sat on a 40 cm (15.7 in) longer wheelbase.

The same architecture would later underpin the GranTurismo and GranCabrio coupés and convertibles. Initially it was powered by an evolution of the naturally aspirated dry sump 4.2-litre V8 engine, mounted on the Maserati Coupé, with an improved output of 400 PS (294 kW). Due to its greater weight compared to the Coupé and Spyder, the 0-62 mph (0–100 km/h) time for the Quattroporte was 5.2 seconds and the top speed 171 mph (275 km/h).

Over 5,000 Quattroportes were built in 2006
  1.   Ford
  2.    Public
Ford Model B, Model 18 & Model 40 / V8 Club - Ford produced three cars between 1932 and 1934: the Model B, Model 18 & Model 40. These succeeded the Model A. The Model B continued to offer Ford's prove...
Ford Model B, Model 18 & Model 40 / V8 Club - Ford produced three cars between 1932 and 1934: the Model B, Model 18 & Model 40. These succeeded the Model A. The Model B continued to offer Ford's proven four cylinder and was available from 1932 to 1934. The V8 (Model 18 in 1932, Model 40 in 1933 & 1934) was succeeded by the Model 48. It was the first Ford fitted with the flathead V8. In Europe, it was built slightly longer. The same bodies were available on both 4 cylinder Model Bs and V8 Model 18/40s. The company also replaced the Model AA truck with the Model BB, available with either the four- or eight-cylinder engine.
  1.   Smart
  2.    Public
Smart roadster coupe R452 and Smart roadster cabrio C452 / W452 2003-2006
  1.   SAAB
  2.    Public
Saab 99 1968-1984
  1.   Lotus
  2.    Public
Lotus Elan M100 1989-1995
  1.   Triumph
  2.    Public
Triumph 1300 / TC / 1500
No groups are currently available. Be the first to create one today!
Unable to load tooltip content.

Drive-My.COM MEDIA EN/UK based is United Kingdom’s top cars/retro/classic/modern/tuning/moto/commercial news, test drive, classic cars and classifieds. For car advertisement be it an RETRO/CLASSIC/OLD-TIMER/NEW-TIMER, Coupe, MPV, SUV, Luxury Car, Commercial vehicle, OPC car or even an auction car. We update you with latest information on new car prices from both parallel importers and car authorised dealers with brands such as Aston-Martin, Bristol, TVR, Bentley, Ford, Porsche, Jaguar, Land Rover, Citroen, Tesla, DS, Alfa Romeo, Subaru, Toyota, Acura, Honda, Nissan, Audi, Kia, Hyundai, Volkswagen, Volvo, Mitsubishi, BMW, Mercedes-Benz. Find new car pricelists, new car promotions, new car reviews, latest car news, car reviews & car insurance UK. We are also your information hub for parking, road tax, car insurance and car loan, car audio, car performance parts, car discussion, motor insurance, car grooming, car rental, vehicle insurance, car insurance quotation, car accessories, car workshop, & car sticker, tuning, stance and Cars Clubs

Our Drive-My EN/USA site use cookies