Fiat clubs and pages
- Post is under moderation/ #Fiat-130-Coupe / #Fiat-130 / #Fiat
I got the call in June to take the Fiat over to Mark Devany at Dino Twenty Four Hundred for new struts. That happened fairly quickly, but no word on improvement yet because Mark is also sorting the handbrake, rear flexi hoses and pads. Meanwhile, I’ve ordered a set of engine hoses and I’m looking forward to getting it back any day now.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationFIAT 130 COUPÉ
/ #Fiat-130-Coupe / #Fiat-130 / #Fiat /
RUN BY Martin Buckley
OWNED SINCE 2009
PREVIOUS REPORT Nov 2018
I want to make #2019 the year in which I get everything – and I mean everything – sorted on the 130. It is 90% there but, as usual, the final 10% is proving the hardest. The problem with getting a car up and together piecemeal and ‘on the hoof’, as it were, is that as soon as you get one item right it tends to highlight all the other issues. What seemed acceptable last year now irritates the hell out of you.
Top of my list for quite a while has been the suspension; every time I drive the Coupé, my overriding impression is that it wallows like a pig if driven with anything even approaching enthusiasm. Standards have moved a long way in 40 years, but these cars were fairly highly rated for their cornering capability. Yes, they rolled – everything did in the ’70s – but not quite as dramatically as this.
It can only be dampers, really, but the odd thing is that when you bounce the car on each corner it feels rock-hard. I have mentioned this to Mark Devaney at Dino 24 Hundred several times, but we have now decided to galvanise ourselves. Mark has found a set of donor 130 Coupé struts and sent them off to Gaz Shocks in Essex which, as the name implies, builds custom gas shock absorbers. These take about four weeks to do (they are busy), so hopefully by the time you read this I’ll have a 130 that doesn’t want to scrape its doorhandles on the floor.
Depending on how successful this proves to be, Mark is talking in terms of a thicker front anti-roll bar as well. The dampers will be adjustable, so hopefully we’ll be able to tweak them to best advantage without losing the good ride quality.
The brakes are pretty decent, other than the fact that the vacuum in the servo disappears overnight so you have a solid pedal for the first minute or so; maybe it’s time to look at the booster. I still like the idea of finding an alternative disc and/or caliper to future-proof the car a little, because certain parts are getting rare and pricey. The way forward here may lie in the realm of the Stratos replica, because the genuine cars used a variety of 130 bits, possibly including the hubs and wheel bearings.
I spent some time at the end of last year cleaning the engine bay with fairly good results. It was just a matter of some laborious elbow grease in every corner, making good use of the Polti steam-cleaner and the Gunk, then going over it again until you either get bored or realise you can’t get it looking any better unless you want to take the engine out – which, to be honest, is probably the only real way of doing the job properly. But still, it looks better than it did.
As for the rest of the car, visually the only things I find irksome are the tired and faded window channels. I now have some samples of possible replacements from trim specialist Woollies to look at.
Ace mechanic Gus Meyer sorted the fan-switch issue that cropped up on the Le Mans Classic trip, but we still need to look at the wipers (there’s only one speed when there should be two), the driver’s-side door lock (it won’t unlock) and fit the correct Marelli air horns: the Fiat’s American Edelweiss ones really should be on my #Oldsmobile-Toronado .
It seems the 130 is going up in the world at last, because I’ve been contacted by two separate parties looking for parts for ground-up rebuilds; one the subject of a car restoration programme on the TV. This indicates that they are either climbing in value (they are, but only a bit and it’s never been about that with these cars for me) or, with the youngest now more than 40 years old, there just aren’t enough really nice ones to go around.
This is true in the case of the right-hookers, but I seem to get offered left-hand-drive Coupés all of the time. Most are described as ‘rust-free but in need of recommissioning’ – an estate agent-style euphemism for ‘knackered’.
Mark Devaney, Dino 24 Hundred: www.dinouk.com
Plenty of elbow grease has got the 130’s engine bay looking a whole lot more presentable.
The Coupé looks good, but now Buckley wants to get it driving just as well; once rebuilt, the replacement dampers (right) should help.
Stream item published successfully. Item will now be visible on your stream.
- Post is under moderation
Fifty years almost to the very day I’m writing this, Fiat announced its new 130 saloon at Geneva. Few details were given, and the single car on display kept disappearing into the floor – probably so that people couldn’t linger on the wonky pre-production panel fit.Stream item published successfully. Item will now be visible on your stream.
- Load previous stream items