• BASKING SHARK

    The E24 6 Series is a masterpiece of classic design and one that with a just a few mods becomes something special. This classic CSi isn’t the sort of shark that’ll rip your leg off without hesitation or warning – it’s a mellow, low-and-slow cruiser. Although with 200hp-odd from the factory, you’d still do well to keep an eye on it… Words: Daniel Bevis. Photos: Henry Phull.

    “BMWs are in my blood,” says Henry Phull, as he nonchalantly rumbles to a halt before the photographer’s lens in his shimmering retro sharknose. This, of course, sets alarm bells ringing – you know what happens when you mix sharks with the suggestion of blood, you’ve seen Jaws. We step back cautiously and allow him to elaborate: “My dad had numerous Beemers when I was growing up, the most notable being an E24 M635CSi in red – that was his favourite car, and I’ve wanted a sharknose of my own ever since.”

    It’s a story oft-told, the my-dad-had-one-of- those aspiration, and it’s played beautifully into Henry’s hands as he strategised the long game. Starting out his driving career in an Audi runabout before graduating to an E34 525i, the stepping stones were inexorably leading him toward an old-skool 6 Series… although when it happened, it came out of left-field, as it turned out that the lure of the E34 5 Series distracted him somewhat. “I just fell in love with the noise and the leather of the 525i,” he grins, “and after that I had a V8 530i, with both cars receiving Throwing Stars, coilovers and M5 interiors. I was then on the hunt for a 540i – and I test drove a few which turned out to be lemons – when a 635CSi turned up at the right price, in the right place at the right time…”

    This move of celestial serendipity was enough to jolt Henry’s childhood dreams back on track. Receiving a message from a friend saying that a mate of theirs in the motor trade had just taken in an E24 in partexchange was enough to prick Henry’s ears up. He called the seller in question, who turned out to be vague on the details and sent over some low-quality photos of the car. Not a lot to go on, there – but it had one key hook: “It was white!” says Henry, triumphantly. “A white 635CSi is an uncommon sight, so I was interested.”

    From there on in the whole thing was inevitable, really. The cherry on the cake was that the vendor was planning to put it into his bodyshop to freshen up the front wings and sort out any rust the car may have, and this – combined with the low, low price (undisclosed here, but undoubtedly a once-in-a-lifetime deal) – was enough to twist Henry’s arm. Although to be fair, it was already pretty much twisted. The chance to own the car of his childhood dreams? Yeah, you’d have been right in there too.


    “I told him I would go up and view the car as soon as it was out of the paint shop,” he recalls. “A week later I made my way to Basingstoke to take a closer look. On first inspection the car was dirty and tatty, like it was in the photos I’d seen previously, but the paint was decent and they’d done a good job on the wings. It needed a few niggly things sorting; the floor was wet, the windows didn’t work properly, the indicators didn’t work, the engine had a couple of oil leaks and sounded tappy… but I decided that the car was being sold to me so cheap, it was worth the risk, and I could break it for more than I paid for it if the car turned out to be bad.” With no prior experience of owning M30-engined cars, this was something of a step into the unknown for Henry, but it represented more of the good sort of fear that you get from, say, rollercoasters than the bad fear you associate with axe murderers and PPI cold calls. And so a deal was struck.

    Such was the thrall in which the E24 held Henry that he kept it completely bone-stock for a year before any thoughts of modifying crossed his bows. But inevitably the dark thoughts crept in, as they’re always prone to do, and he found himself bolting on a set of Throwing Stars (hey, stick with what you know…) and chopping a few coils off the springs. Appearances at a few shows yielded universal praise, although at this stage he was focusing more on maintenance than modification. But with the car mechanically tip-top and aesthetically up-to-scratch, it was time to do things properly.


    “I’d always fancied split-rims, and this was the car that finally pushed me to do it,” he says. “I’d always gone with OEM+ wheels before, but I found myself scanning the internet, looking for the right splits.” He’d already decided that they had to be 17s or 18s, and initially favoured a mesh design that would evoke the CSi’s original metric wheels. But then a set of OZ Futuras popped up on Stanceworks and changed all of that.


    “They were up for sale in Germany, and it was a bit of a scary purchase as they were used and I would never know the true condition of them until they arrived,” he recalls with a grimace. “I wasn’t even after this sort of wheel design but this set had gold centres; gold on a white car was what I wanted. It’s just so period-correct. A quick photoshop later and it was clear that they would look amazing!”


    The specs were aggressive and Henry found that the judicious use of spacers would push them right into the arch lips in fine style. The next inevitable quandary, of course, was how to lower the thing…

    This was a weighty decision indeed, with Henry having recently devoted himself full time to Slam Sanctuary, the site he founded to showcase badass low-down rides. He had to walk the walk, right? But at the same time there was a tight budget to consider – going it alone employment-wise is a financial tightrope. This was the initial impetus that swayed him away from air-ride and toward rolling static, although we all know that this is more than a cost-based decision; air vs coilies is a lifestyle thing. They both have their merits, but it’s down to how you use your car and what sort of character you want to give it.

    A long chat with SS Autowerks resulted in a set of well-priced BC Racing coilovers winging their way to him, in drool-worthy Extra Low flavour with custom spring rates. To complement this new attitude to altitude, SSA also threw some engine raisers to get the M30 20mm further from the Tarmac which, brilliantly, raise the base of the sump above the subframe, so the car doesn’t even need a sump guard. Who says static rides are all oily heartache and tow trucks?


    The vagaries and mechanical complexities of the E24 (shall we just call it quality engineering?) meant that the fitment of coilovers wasn’t a walk in the park, so Henry entrusted the job to the irrepressible Paul of Coltech Classics, who set about ripping out the MacPherson strut setup and welding the Extra Low units to the hubs.

    “Paul said the BCs were a dream to work with,” Henry enthuses. “We couldn’t believe how low they allowed the car to run while maintaining drivability, I’d recommend them to anyone with an E24.”

    The nature of Henry’s sloped driveway meant that the centre exhaust box was catching with these new-found lows, which gave him the excuse to rip the thing off and replace it with straight-through pipes – a nifty little fringe benefit – while some trimming of the rear arches was the final job Paul needed to carry out in order to make the thing day-to-day streetable.

    And that, in a nutshell, was the realisation of Henry’s boyhood dream. You’ll note that the car’s exterior remains resolutely unmodified – “Why alter the body of an already beautiful car?” he reasons – and much the same is true of the factory interior, save from the addition of an MTech I steering wheel. This is textbook ‘stop, drop and roll’ stuff, and it’s all the better for it.

    “The first show I took it to with the new look was the Players Classic, and the attention it received was just on another level,” he grins. “And then the BMW Festival at Gaydon… people were constantly asking me if it was bagged, which just goes to show what the right sort of coilovers can achieve.” Such is the menace of the bona fide shark; you don’t need to be flash – you just have to bare your teeth.

    DATA FILE #BMW-E24 / #BMW-635CSi / #BMW-635CSi-E24 / #BMW-6-Series / #BMW-6-Series-E24 / #BMW / #OZ

    ENGINE AND TRANSMISSION 3.4-litre straight-six #M30B35 / #BMW-M30 / #M30 , engine raisers, centre exhaust silencer removed, four-speed auto / #ZF4HP / #ZF

    CHASSIS 8.5x17” ET13 (front) and 10x17” ET19 (rear) #OZ-Futura wheels with 25mm (front) and 30mm (rear) spacers and 205/45 (front) and 245/35 (rear) tyres, #BC-Racing Extra Low Type RA coilovers with custom spring rates

    EXTERIOR Stock

    INTERIOR Stock with full factory leather, M Tech 1 steering wheel

    THANKS Paul at Coltech Classics for going the extra mile to lower the car, Nick and Alex at SS Autowerks for supplying BC coilovers and engine raisers, Tom Etheridge for servicing and helping to maintain the car in his spare time, Paul at MVT Poole for general maintenance and always sorting me out at the last minute whenever there’s an issue, Simon and Nathan at The Wheel Specialist Bournemouth for assisting with fitment and tyres. Last but not least, my parents for letting me park the car in their garage!

    “The attention it received was on another level!”