- GOING ON TOUR
BMW never made an #BMW-E91 M3 Touring, so this owner decided to build his own… BMW never built an E91 M3 Touring, but if it did, it’d probably look just like this… only not as low and on smaller wheels! Words: Andy Basoo. Photos: Antony Fraser.
It was back on the 22 February 2011 the euphoria started, at 1.15pm to be precise. A build thread began on the popular M3Post forum, which within a matter of days had 35,000 views from around the globe. A dozen or so photos and a handful of words was all it took to spark such excitement; the BMW community was witnessing something special.
The username was #63NP. The thread topic: ‘!!E91 M3 V8 DCT Estate / Wagon Full Conversion..!!’. We don’t need to tell you that BMW never built an E91 M3 Touring. In fact, the German manufacturer has never built an M3 Touring full stop. Coupés, Saloons and Cabriolets yes, but never a Touring. And that’s somewhat surprising considering how much we love estate cars here in the UK. The Audi RS4 has never struggled for sales and the majority of examples you see on the road are wagons. If Audi can make it work, why can’t BMW?
To be fair, BMW has tried its hand at highperformance estate cars in the past. The E34 and E61 M5s were available in Touring format, and BMW even tested the water with the E39, building a one-off Touring version.
They just weren’t big sellers though. It’s difficult to pin down exactly why not, but they didn’t capture the imagination of the public. Maybe it was because they didn’t look different enough from any other M Sportkitted model? The RS4 is wide, beefy, has distinctive aluminium mirrors and looks like it’s on steroids, while the M5s of the past have been much more understated.
The 5 Series was also significantly larger and perhaps that’s where the downfall lay? Audi produced a larger RS6, too, and while it’s admittedly a fine machine in its own right, it was never the big seller like the RS4. So maybe 3 Series Touring M cars would have been the way to go? Nicholas Pritchard (aka 63NP), the man who instigated that build thread certainly seems to think so, hence the reason he’s built his own example. And before we go any further, let us tell you, it’s truly OEM quality in its execution.
Nick’s a heavy goods vehicle driver and has always had a thing for estate cars. “I’ve had loads,” he confesses. “I’ve had a B7 RS4, an E61, an E36 and an E30 – that I fitted Montego Countryman roof rails to because the E30 never came with roof rails! I even had a Rover 400 estate. I just like estates!” Which is why when he saw this one, he simply had to have it.
“I was doing a 997 Porsche at the time,” he continues. “This was back in 2009. I used to pop down to a local bodyshop from time to time to see a mate of mine. The owner of the bodyshop had this car tucked away in the corner and covered in dust. It didn’t have any wings or doors or an interior. It was just a shell, although it did have an M3 V8 sitting in the bay but it wasn’t running.”
Nick was interested and asked the owner if it was for sale. He got a firm “no” in reply. The car was a 2007 318i auto, although the original engine and transmission were nowhere to be seen. The cabin was filled to the roof with parts and the wiring loom was in a heap in the corner of the bodyshop.
“Are you sure it’s not for sale?” Nick persisted. “Quite sure, thank you very much,” came the response.
Bearing in mind it was 2009 and this was a #2007 Touring, it was a relatively new car to be chopping about as extensively as this one had been. Not many of us would have the confidence to be so brutal to a BMW that was barely run-in. Nick was so taken with the car that he would drop in occasionally and the two would have the same brief but very polite conversation.
“I noticed towards the end of the year, that the guy’s enthusiasm for the car was waning,” Nick explains, “so at the start of 2010 I asked him again, and amazingly he said ‘yes’. He’d been slowly building it up, so by the time I got it the panels were back on and an M3 interior in it, but it still wasn’t running. I think one of the guys down there had put a jump pack on it to get it started, but a power surge had fried the ECU and a few other things. I would say it was probably three-quarters complete.”
The previous owner had sourced the V8 from a donor car, an E90 M3 Saloon LCI with a slick DCT gearbox. Amazingly, the platforms of the Saloon and Touring are virtually identical. In fact, from the nose right the way back to part way down the rear doors is the same. The rear ends of the rear doors are a slightly different shape to conform to the different boot layout. But apart from that, the layouts remain the same. So, despite there being countless views and rumours about the complexity of an E91 M3 conversion, it’s actually pretty straight forward.
The donor car had been stripped. We mean, completely stripped down to its shell. Engine, gearbox, prop, body panels, interior, dash the lot. The same had then been done with the Touring. As you’d expect, priority had been given to the fitment of the M3’s beautiful 4.0-litre 32v V8 ( #S65B40 ) and its #DCT gearbox. It’s hard to comprehend and perhaps it sounds like we’re dumbing the process down, but there was no fabrication or adjustment made to any brackets. Using the S65’s OEM mounts, the V8 slotted easily in to place, the gearbox aligned perfectly, too, as did the driveshafts and propshaft, and all bolted straight in.
Even the standard Saloon exhaust system fitted. All that the previous owner had to do was to add two thread bolts for the rear box hangers, readily available from BMW, and the quad exhaust sat perfectly.
With the intention being to swap over and utilise every possible optional extra fitted to the M3 donor car, the complete Saloon wiring loom, fuse box and dash were fitted. This meant the all-important iDrive system was also available to the driver.
Regarding the body panels, the complete front end is M3 Saloon. The front bumper, kidney grilles, vented bonnet, and wider front arches were all bolted straight on, and the shut lines matched perfectly. Obviously, a wider front end meant the Touring’s original undertrays and arch liners no longer fitted, so these had been swapped over from the M3, too. Incidentally, before the all of the panels were fitted, the V8’s ancillaries had all been set in their rightful place, including the relevant coolers and bottles being placed in the wings. The goal had been to make this car as OEM as possible.
As you can imagine, this was harder to achieve at the rump end of the Touring. With the car having a wider track, the rear arches needed widening, so M3 Saloon rear quarters had been grafted in and expertly reshaped to meet the lines of the Touring.
The rear bumper is a combination of M3 Saloon and M Sport Touring. It would have been easier to modify an estate bumper, but the previous owner aimed at retaining as much M3 styling as possible, and as such the central vent, angles and lines had all been adopted from the Saloon parts.
Inside the cabin, the Touring’s carpet and panoramic roof had been retained as neither of these were available in M3 guise, but just about everything else you can see and touch is M3 Saloon. Even the rear bench bolted straight in. The rear seat back, however, is Touring, well… kind of. The seat foam had been reshaped to fit and match the bench, and then M3 Saloon covers added.
It was in this overall state that Nick bought the car. “As I said, it was about three-quarters complete when I got it,” he continues. “He’d done a great job. But, obviously the car wasn’t running and it felt tired and a little loose.
So the first thing Nick did was to order a new ECU and cache unit from BMW. After sorting the coding, to his joy the V8 barked into life, enabling Nick to turn his attentions to tightening the whole car up. “There were so many little things that needed sorting,” he explains. “I half stripped the car back down again. As I said, it didn’t feel tight. Things like the doorcards felt a bit loose, some of the trim was slightly squeaky, that kind of thing. As I was taking it apart, I started noticing that a lot of the clips were missing or broken. Some of the trim was scratched or damaged, the screws didn’t match, as you’d expect I guess. That’s what happens when you take a car apart.
“For me though, the whole point of the car was for it to be OEM quality, so I ordered about £1000 worth of clips, screws and trim from BMW. I’ve also got a friend who works in a BMW dismantlers and he was able to help me out with various other parts that were missing or damaged. Things like the membranes in the doors weren’t sealed, so they would have leaked and filled with water if I didn’t seal them. Essentially, the car needed finishing. The bulk of the work was done, but I think it’d been rushed back together when the guy lost interest.”
Nick has therefore invested heavily in transforming this car from the one that he bought. He primarily concentrated on the chassis, replacing the Touring’s factory-fit suspension with a full set of top-spec Variant 3 KW coilovers. He then ordered a set of gorgeous 20” Breyton Race GTS RM forged wheels to tuck under the wide arches, with M3 offsets, of course. Sizeable 9.5x20” wheels fill the fronts, shod in 245/30 Continentals, with broader 10x20” versions out back wrapped in 285/25 rubber by the same brand. He’s is considering nudging the front suspension down just a fraction more, but we have to say the E91 sits beautifully.
Nick then approached Reyland Motorsport for help sorting the front brakes. “I sourced a set of six-pot Brembo calipers from a C63 Mercedes,” he relates. “They’re basically the same as the BMW Performance calipers, just with different mounts on the back. I dropped them off at Reyland along with an M3 suspension leg so they could get all the brackets right and come up with suitable discs and pads. They used 380mm discs in the end and had my car in for a few days fitting everything up and testing it for me. All the brake warning sensors are still connected and functioning. I want to get a kit for the back now.”
We could go on all day about the fact Nick’s retained the Touring’s loom from the rear doors back because certain things are wired differently; how he’s removed individual pins from the loom plugs to ensure nothing is in place that isn’t needed; how he’s retro-fitted a CIC sat nav system that now runs ‘DVD in Motion’; details of the countless trips to the bodyshop to have blemishes removed, lines redefined and exhaust tips powdercoated in black; and why he’d only settle for BMW Performance front seats, but hopefully by now you’ve realised what an exceptional build this is.
Learning how identical the platforms are, it would appear relatively straightforward to swap all the parts across from one car to another. And to his credit, the previous owner has done phenomenally well in doing just that, but it’s finishing the job properly that takes time and patience to get right, and Nick has those qualities in abundance.
Without his input, this would feel like a fast, yet slightly tired, rattly estate. Thanks to Nick’s input it now possess a true OEM quality. It feels like a genuine M3 with full M car pedigree, not simply a modified 3 Series and that’s a difficult feat to achieve. Despite the photos posted on M3Post, some members still questioned whether or not this car was real, and demanded further evidence. Even the official #BMW staff and technicians at Nick’s local dealer were left puzzled when he first popped in to pick up a few parts. Other impressive E91 Tourings have been built around the world and yet more are in the pipeline, but Nick’s M3 converted example is by far the most wellknown.
Over 100,000 views of his build thread prove that. If you get the opportunity to see this machine in the flesh try and find fault with it. After we spent the day with car, we can assure you, you won’t find any.
DATA FILE #BMW-M3-Touring / #BMW-M3-Touring-E91 / #BMW-M3-E91 / #BMW-E91 / #BMW-M3 / #BMW-3-Series / #BMW-3-Series-E91 / #BMW-3-Series-Touring / #BMW-3-Series-Touring-E91 / #BMW-M3-DCT-E91 / #DCT / #V8 / #BMW-3-Series-V8 / #Breyton-Race
ENGINE: #S65B40 4.0-litre 32v V8 from E90 M3 LCI Saloon / #BMW-S65 / #S65 / #BMW , standard #BMW-M3-DCT transmission and LSD, full M3 Saloon manifolds and exhaust system with Saloon hanging threads added to back box
CHASSIS: 9.5x20” (front) and 10x20” (rear) #Breyton-Race-GTS-RM wheels shod in 245/30 and 285/25 Continental tyres respectively, Bimmerworld bolt-to-lug conversion, fully adjustable #KW-Variant-3 coilovers all-round, six-pot orange #Brembo calipers from Mercedes C63 with 380mm discs
EXTERIOR: Complete E90 M3 Saloon front end comprising wings, inner arches, bonnet, front bumper, undertrays and headlights, rear arches widened using E90 M3 Saloon quarter panels, custom rear bumper fabricated from M3 Saloon item and E91 M Sport Touring bumper
INTERIOR: #BMW-Performance seats, M3 Saloon dash, consoles, trim and wiring, M3 Saloon door cards and rear bench with Touring rear seat back foam modified and retrimmed in black nappa leather to match, M3 Saloon steering wheel, M3 Saloon iDrive with CIC sat nav, AC Schnitzer pedals
THANKS: Reyland Motorsport (0121 458 6010 or www.reyland.co.uk) TRS Motorbodies (0121 4548300)