Toggle Sidebar
Recent updates
  • Post is under moderation
    MARK B’S E30 M3 #BMW-E30 / #BMW-M3 / #BMW-M3-E30 / #BMW-3-Series / #BMW-3-Series-E30 / #BMW / #BMW-S14 / #resto-mod /

    There are some events that simply stand head and shoulders above the rest and the Retro Rides Gathering is one of them. Despite a few location changes over the years, it continues to be the class of the field as far as I am concerned. This year saw a multitude of cars descend upon Shelsey Walsh where, set in the hills of Worcestershire, is one of the UK’s premier hill climb tracks. Established in 1905 it has seen a glorious array of cars and drivers, stopping only for the two world wars. I had been before, so knew what to expect and although this was very much a ‘for fun’ event, it doesn’t stop you trying once the light goes green.

    In the days before Retro Rides I was able to get Joe Geach of ARM BMW and Motorsport to spanner check the car and change the oil. I had already backed off the KW suspension to full soft, so as to afford as much compliance as possible. It’s still very firm but allows for some roll and better grip on the slower, tighter corners. In the quick stuff the M3 still felt totally planted and gave me loads of confidence to push on. Now, I’m no natural talent and certainly haven’t missed out on a career in the BTCC or DTM, but I’ve driven a fair few race cars (including an outing in a Formula Opel Euroseries car. A genuine slicks and wings formula) and my personal best in a race-prepared E30 325i is a 59.7. Now considering I’m built for comfort and not speed, I was pretty happy with that.

    I usually leave Cornwall at 3am and make my way up to Shelsey, but this time I went all posh and got myself an Air BnB in Hereford. This meant I could have a lie-in till 7am, grab a shower and enjoy some of the beautiful roads that area has to offer. I’d driven up the day before and crossed the Severn Bridge for some B road fun en route. I even managed to find a jet wash close to Shelsey and got the M3 pretty clean considering the 250+ miles I’d covered and beat the queues to boot. Driving from Hereford to Shelsey, with the sun shining, windows down and the S14 singing, is a cracking start to any Sunday, let alone one with the Gathering to follow.

    One of the great things about Retro Rides is the eclectic mix of cars, with nothing newer than 1995. It really doesn’t matter what you drive so long as it’s old enough, and the atmosphere is terrific. On a personal note, I’m always made to feel so very welcome and it’s a real pleasure seeing the many familiar faces year-on-year. It’s that which keeps me going back time and again.

    As those of you who read my ramblings will know, it has been a tough year or so with my M3. It seemed that every time I left Cornwall the engine would let me down, and not in a small way. Much as I love the S14, it is extremely expensive to rebuild and I’ve been chasing reliability issues for months now. The biggest problem has been with the bearings and the supply of OE quality from independent suppliers. Hopefully, it appears to have been third time lucky and the M3 is now running better than it ever it has. Even with some of the hottest ambient temperatures of 2018, power was a strong 250hp+ on ARM’s dyno, with the rev limit set at 8.5k for engine longevity. It sounds absolutely glorious, especially now there are a few miles on the Eisenmann/Supersprint exhaust system. The pops and crackles on overrun are epic and, along with the induction noise from the carbon air box, it almost sounds like a proper DTM car.

    The mix of cars at Shelsey included a selection of Bavaria’s finest, including a ’60s 1600-2 with a supercharged M42 that was owned and built by James of JFi Classics in Brecon. There was also an S54-powered E28 flying up the hill and sounding glorious. Very much a home-brewed M5 and one of my personal favourites of the day.

    As well as having fun on the hill at Shelsey Walsh, I have been working with Thomas Garner Films and Mumbo Vlogs, who were shooting on behalf of Petrolicious. I’m going to hazard a guess that if you’re reading this, you’ll know Petrolicious and the content they put out on YouTube. If you don’t, you’re in for a real treat. The video will be up in October so just search for ‘Petrolicious BMW E30 M3,’ sit back and enjoy. You’ll also find relevant content on Instagram at mark_e30m3 and official-mumbo.

    Finally, if you’re in Cornwall around mid September, be sure to pay a visit to Watergate Bay and see what is billed as being the UK’s first closed road speed event. It takes place over the weekend of the 15/16th September 2018 and you’ll see a brace of E30 M3s being driven as they were designed to be. There are some very special cars and drivers entered so check out www.watergatebayhillclimb.co.uk for further information. Feel free to come say hello if you visit the pits too! If you can’t make it, I’ll try and bring you an in depth report after the event.

    E30 looked the part at Shelsey Walsh. BMW M3 E30 will be a YouTube star very soon. M3 received plenty of attention.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Matt Petrie
    Matt Petrie joined the group BMW E30 Club
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Matt Petrie
    Matt Petrie joined the group BMW X5 F15
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    SUPERCHARGED E39 M5 Business class just got faster

    STRICTLY BUSINESS This executive saloon may look unassuming, but don’t be fooled, Matt Benson’s supercharged E39 M5 will easily cash any cheques your right foot can sign. Words and photos: Matt Petrie.

    Don’t judge a book by its cover” is an age-old adage instilled in us during our youth. While it is one of the earliest morals taught, it is too often forgotten as we grow old. Taking past experiences and using them to make prejudices towards a result which we expect to be true can get us into trouble and that is the case with Matt Benson’s E39. What looks to be a civilized saloon is in actuality a complete and utter lunatic. Don’t be fooled – this unapologetic M5 will leave you scratching your head when launching from a red light or as it commands curves, winding through the mountains.

    Maintaining a balance of ferocity and modesty is not an easy task and while on paper it might be contradictory, we assure you that Matt’s E39 M5 is a textbook example of a proper business saloon. The key to retaining modesty is doing without the wild colours, aggressive aero, and flashy wheels. Aesthetically, it has to be something to simply get you into work without being the topic of conversation among co-workers gathering around the water cooler. However, that commute to and from the office is a different, exhilarating story. In order to fully appreciate the final product, we need to briefly highlight the evolution of Matt’s mods and previous cars.

    Matt Benson has always had an affinity for V8 muscle and taking the more subtle approach is something of second nature for him. His first car was a Ford Mustang 5.0 LX “Fox body” which, in a sense, was a sleeper in its time compared to its sister version, the Mustang GT. He drove that LX into the ground with over 200,000 miles on the odometer. After many advancements up the automobile food chain, Matt traded some American torque for German refinement as he found himself in another V8, but this time in the form of a 2000 E39 540i Saloon.

    Though Matt was satisfied with the graduation to the European sports saloon and recognized it as a big improvement, the horsepower bug bit him hard. Dinan parts made their way all over the 540i to increase the performance in both the handling and the engine, pushing it to 350hp. Knowing his reasonable limitations had been met with the 540, yet still wanting more out of his car, Matt set his eyes on his current ride – this 2000 Carbon black on Caramel leather M5.

    He found this car over a decade ago, desirably, with one previous owner and only 13,000 miles logged. Immediately, the performance difference was prominent between the 540i and the M5; the torque off the line and the way the car hooked in the corners didn’t leave him with seller’s remorse over the 540i. While he was tacking on roughly 50,000 miles of his own back and forth to the office and on spirited drives, Matt was continuously adding mods to enhance the performance even further. As superior as he felt the car was in comparison to his previous cars, it wasn’t quite enough. Relentless and back with a vengeance, the mod bug bit hard this time, and it did not let go.

    Matt’s first modification to the M5 didn’t lead to horsepower gains per se. Back in 2005 he sourced a Dinan 3.55 differential and while it is one of the biggest improvements that you can make to a naturally aspirated car, ironically, it has nothing physically to do with the engine. Over the years it served its purpose, but as Matt says “I guess I modded a mod” and changed the rear end out to a 3.62. The tight gear ratio shifts the power band, launching the car and virtually making first gear useless in the best way possible. Surrounding the differential in the rear is a matching Dinan high performance exhaust, which flows out back from a Supersprint four-into-one stepped exhaust manifold system. Above the manifolds, under the bonnet, lies a Dinan cold air intake and Evolve Alpha-N tune with MAF delete and while this combination achieved Matt’s 450 horsepower goal, it was time to raise the bar yet again.

    Chasing greater horsepower and maximising the NA bolt-ons, he crossed the threshold into the forced induction world. Matt commissioned Autocouture Motoring in northern NJ, well-known for its work with BMW and supercharging the E9x platform specifically, to do the work. The team installed an ESS Tuning VT1-560 supercharger system along with an Aquamist meth injection kit. To handle the horsepower increase and fight the ravages of age, Autocouture also installed a Dinan subframe reinforcement kit at the same time as the performance upgrades. The combination of the Dinan differential chewing through first and second gear with the pull of the ESS supercharger and meth higher up the power band is a visceral experience that delivers an exceptional one-two punch.

    In fact, when Matt was asked what his favorite modification to the car has been, he responded happily, “I have two favourites, the first being the supercharger, which brought the biggest smile to my face, and second would be the shorter diff, it’s like a 50hp equivalent increase!”

    With all of this newly-added power he now addressed the other areas of importance: brakes and suspension. Matt went top shelf when choosing suspension, opting for the JRZ coilover kit and set the car up slightly lower than the stock ride height, maximising suspension travel and comfort while optimizing the performance that the JRZs offer. StopTech ST60/ST40 brakes at all four corners enhance the stopping power tremendously, with six-piston calipers up front and four-piston calipers in the rear, both sets finished in silver to keep the M5’s modified appearance at a minimum.

    Matt loved the car’s aesthetics, especially its finely crafted, unadulterated exterior however, he needed a wheel that would clear his brakes and be lighter in weight than stock, while still maintaining the M5’s factory appearance. Wanting to mimic the style of the OEM M5 wheel, Matt, along with the crew at ACM, carefully selected the HRE Classic 301 monoblocks. Taking it a step further, he went with HRE’s gorgeous, custom, hand-brushed finish with a darktinted clear coat, tying them in with BMW’s factory chrome shadow finish on the M5’s original wheels.

    This M5’s interior is straight out of a #BMW catalogue with the smooth caramel-coloured hide flowing from the seats onto the extended leather lower dashboard, with just the right amount of wood trim. Nothing is out of place nor unnecessarily added. Under close examination, only an aluminium pedal set and short shift kit can be spotted in here and even at that point the SSK is still capped off by the stock wood knob to maintain the factory look and feel. Matt was highly selective with every modification made to his M5, and held the highest of standards for how this on-going project was executed.

    “While the car is more than 16-years-old, it rivals anything on the road currently,” Matt says and we’d have to agree with him, it is completely relevant in every way to any of the European sports cars of today. The gentleman’s executive saloon is one that does not cry out for attention, but rather discretely delivers to those who know what they’re looking at. Each modification was carefully considered and completed with one goal in mind, which was to make the car perform at its full potential. His car takes everything that was incredible about the E39 M5 and sharpens it to to modern standards, making this one of the most fun cars you will ever drive.

    “Autocouture Motoring installed an #ESS-Tuning-VT1-560 supercharger system along with an Aquamist meth injection kit”

    TECHNICAL DATA FILE Supercharged #BMW-E39 / #BMW-M5 / #BMW-M5-E39 / #BMW-M5-Supercharged / #BMW-M5-Supercharged-E39 / #ESS-VT1 / #ESS / #Vortech-V3 / #Vortech / #Howerton / #BMW-5-Series / #BMW-5-Series-E39 / #BMW-5-Series-M5 / #BMW-5-Series-M5-E39 / #BMW / #ESS-Tuning

    ENGINE AND TRANSMISSION 4.9-litre #V8 #S62B50 / #S62 / #BMW-S62 , Supersprint four-into-one exhaust manifolds, #ESS-VT1-560 #ESS-Supercharger kit with #Vortech-V3 supercharger, #Howerton-Aquamist-HFS-3 system, Dinan performance velocity stacks, #Dinan high-flow performance exhaust, high capacity electric fan, oil separators. Six-speed manual gearbox, #CNS-Racing 10.5 Kevlar clutch and dualmass flywheel, Dinan short shifter kit, 3.62 LSD with three clutch ramps and polished ring and pinion gears

    CHASSIS 8.5x19” (front) and 10.5x19” (rear) #HRE-301 monoblock wheels with 245/35 (front) and 275/30 (rear) Continental tyres, Dinan subframe reinforcement kit, Dinan front tower strut brace, Dinan camber plates and monoball front ball joint kit, #JRZ-Stage-3 suspension system from Dinan, #Beast-Power heavy-duty anti-roll bar brackets, #StopTech-ST60 BBK with six-piston calipers and 355x32mm discs (front) and ST40 BBK with four-piston calipers and 355x32mm discs (rear)

    EXTERIOR Tinted windows, Depo angel eye upgrade kit, front lower bumper grille with aluminium mesh brake ducts

    INTERIOR Black carbon fibre trim, aluminium pedal set, widescreen nav upgrade

    THANKS Autocoulture Motoring (Tom Limatola, Sal Benanti, Matt Petrie and team) for bringing it to the next level, Northeast Motorsports (Mike O’Neill and team) for all their expertise, Motorsports West (Dave Bogert and team) for being the source of my performance BMW “condition”

    Caramel Heritage leather adds a dash of luxury.

    Gorgeous #HRE-301 monoblocks and #StopTech #BBK all-round.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Matt Petrie
    Matt Petrie joined the group BMW E39 5-series Club owners
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Matt Petrie
    Matt Petrie joined the group BMW M4 F82
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Gitter
    Gitter is now friends with Matt Petrie
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Matt Petrie
    Matt Petrie is now friends with Phil Bell
    Stream item published successfully. Item will now be visible on your stream.