Toggle Sidebar
Guide 1 to 8
In this photo - 1 With the car on a vehicle lift, remove the two bumper bolts to exhaust bracket. , 2 Before you remove any other bolts, support the system at the back box. , 3 Remove the two longer exhaust bolts. , 4 Remove the two connecting pipes to the back box bolts (one each side of the pipe). , 5 Remove four side bolts (two on each side). , 6 Remove two clamps – you may need to use silicone spray to loosen up the fittings. , 7 Remove original exhaust hangers from connecting pipes and back box and attach to new system. , 8 Remove original system and simply reverse procedure to fit new system.
11 November 2016