Toggle Sidebar
News Feed

Currently filtering items tagged with #V8-swapped


  • Post is under moderation
    FIRST WORDS
    First things first, we begin this issue with an announcement: we have new bosses as PBMW now belongs to Kelsey Media Ltd, whereas before we were owned by Unity Media Plc. Obviously what you’re interested in is how this affects you, and it’s all good news. Most importantly, #PBMW isn’t going anywhere so you’re still going to get your regular modified BMW fix, no worries there, and while both cover and subscription prices have been adjusted you’re now getting 13 issues a year rather than 12, as the magazine will now be on sale every four weeks rather than once a month. This means even more modified #BMW goodness to wrap your reading gear around throughout the year. No complaints then!

    Hopefully January didn’t drag you down too far and you’re on the up, getting excited about the prospect of warmer weather and hitting the shows. Got exciting new plans? New wheels? New paint? Ready to go or still planning? Whatever your situation, we can’t wait to see what’s new on the BMW scene once show season kicks off.

    As for the right now, you’ve got the March issue in your hands to put a smile on your face and it’s packed full of awesomeness. Where to begin? How about with our cover car? Griot’s-Motors rocked SEMA with its insane E30 Touring and now it’s here to rock your world. This two-door, #V8-powered , M3-bodied machine is unlike anything we’ve ever seen and it’s an incredible build from top to bottom. We’ve also got 2M Autowerks’ awesome E46, which started out life as a 330Ci but now boasts a custom metal wide-body rear end, sits on HRE splits and then there’s the small matter of that S54 swap. Closer to home there’s an insane, #BMW-S62 #V8-swapped E34 drift beast, a wild 476hp 135i, and a super-clean E36 Touring for you to enjoy, plus our Car of the Year results!

    In fact, there’s so much to enjoy that we should stop wasting time with idle chat and let you get on with reading the issue. We’ll see you next month.

    Griotʼs-Motors two-door #BMW-E30 / #BMW-V8 / #BMW-Touring / #BMW-E30 / #BMW-3-Series / #BMW-3-Series-E30 / #BMW-3-Series-Touring / #BMW-3-Series-Touring-E30 / #BMW / #Griot's-Garage / #BMW-E30-Griotʼs-Motors / #BMW-Touring-2-door / #BMW-E30-M60 / #BMW-E30-V8 / #Getrag / #HRE /
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    PASSION WAGON #BMW-M3

    Griot’s Motors unleashes its V8-powered, two-door, #BMW-M3-bodied E30 #BMW-M3-Touring . Two-door, M3-bodied, #V8-powered E30 Touring.

    Astonishing in its vision, astounding in its execution, just plain awesome by its very existence, the Griot’s Motors two-door, #V8-swapped , #M3-bodied E30 #BMW-M3-Touring-E30 is quite unlike anything we’ve ever seen… Words: Elizabeth de Latour. Photos: Kevin Uy.

    What’s amazing about the modified BMW scene is that, just when you think you’ve seen it all, someone comes along and produces something the likes of which you’ve never seen before. It’s no mean feat, and you’re looking at one such creation right now. It is a two-door, #M3-bodied-E30-Touring powered by a 4.0-litre M60 V8. This creation is the brainchild of the Griot’s (pronounced Gree-oh’s) Motors team, itself the skunkworks division of Griot’s Garage – a car care manufacturing company based over in Tacoma, Washington, USA. If you’ve never heard of Tacoma, look up Galloping Gertie, an infamous bridge that collapsed in 1940 due to strong winds. And if you’ve never heard the term skunkworks before, it’s basically a name given to an experimental department of a company.


    Griot’s Motors was started by Richard and Phillip Griot. “The garage buys, sells, restores and modifies a wide variety of classic cars,” says Nick Griot. “Our main restoration shop is actually part of the Griot’s Garage headquarters.” Skunkworks it may be but Griot’s Motors is an impressive operation in itself, with around 70 cars currently held in the company’s collection, which is constantly changing as cars are completed, sold on and new ones purchased. BMWs naturally make up a portion of this collection, with a number of modern and classic examples along with a couple of motorbikes. “BMWs have always been of interest to us as they represent a perfect blend of design and function which carries through to the people who buy them,” explains Nick.

    “BMW owners are passionate about racing, preserving, modifying and maintaining their cars – which is pretty much us in a nutshell. Griot’s Garage is also the exclusive Car Care Provider for the BMW Car Club of America so we are actively invested in the BMW community and do a lot with the club every year.”

    That’s all well and good but it doesn’t explain how this insane E30 Touring came about. “At Griot’s Motors we basically focus on modernising cars without losing any of their vintage attributes,” explains Nick. “And we are constantly looking for unique, hard-to- find cars. This was a car we wanted to own just because we finally could. E30 Tourings were never imported to the States and, generally, a car must be over 25-yearsold to be able to be imported and registered. We found this car for sale in Florida and it had made its way there from Germany via Japan. It was in good original condition, and very complete, so we bought it thinking it would remain relatively stock and would be enjoyed as it was. However, once we got the car and saw the wear and tear and significant paint degradation we knew it was in need of restoration, which is where we went a little mad and cooked up a crazy vision for the car – one that had never been done before.”


    The blame for everything that you see here can really be placed on Richard’s shoulders, as Nick explains: “After sitting in the car he stated that visibility was not up to his standards and he wondered aloud about the potential of longer doors from an E30 Coupé to improve visibility. That started the discussion of the two-door conversion, which led us all the way to M3 body work, an engine swap, and custom fabrication.”

    The bodywork didn’t come first, though, that honour goes to the engine, but it’s too big a deal for us not to get excited about it. The sheer amount of extensive custom fab work that’s gone into making the dream a reality is mind-boggling. With the seed sown, the Griot’s Motors team started exploring the idea of the two-door conversion and, after taking some measurements from their pair of E30 M3s, they realised that the M3 bodywork would work very well. With what might seem like an insane idea now looking eminently achievable the car was delivered to J-Rod & Custom who began the Herculean task of turning four doors into two and making it all look like a factory job.

    The B-pillar had to be moved back nine inches in order to be able to accept the longer doors. A completely custom frame had to be built into the space vacated by the rear doors. And new inner wheel wells were created to accommodate the wider M3 rear arches (the quarter panels having been sourced from Germany). The rear light housings had to be modified to fit the standard light clusters, new window trim was also created and the glass from the rear saloon doors was used between the B- and C-pillar. The front arches fitted straight on and all the remaining body parts are OE #BMW items with bumpers and side skirts acquired from local BMW enthusiasts. The finishing touch involved six coats of PPG Deltron Griot’s Red. The end result is nothing short of spectacular. Nick says the goal was to create a car that looked like a factory product, and that’s been achieved and then some. The bodywork is perfect, the paint finish flawless, and the combination of Touring body, two-door configuration, and M3 arches is breathtaking. No doubt there are plenty of Touring enthusiasts out there choking with rage right now but you’d have to be a fool to look at this E30 and think it doesn’t look anything less than perfect.

    As we briefly touched upon earlier, the engine was actually the first step in the build process and, when it came to the V8 swap, the Griot’s team worked to the same exacting, obsessive standards to ensure that, bonnet up, the engine bay would leave onlookers as floored as the rest of the car. Before all this madness began there was a 2.5-litre M20 under the bonnet but that simply wouldn’t do for a car of this calibre, which is why an engine swap was a necessity. The engine in question is from a #1995 E34 540i, purchased in its entirety to provide the E30 Touring with not only that lusty 4.0-litre #V8 but also a six-speed manual gearbox and engine wiring harness, making for an easy engine exchange, with the V8 sitting on custom mounts along with a fabricated transmission saddle and tunnel reinforcement to support it. But the engine swap itself isn’t the only impressive part, it’s the work that’s gone on around it, the attention to detail, that impresses the most. Prior to the insertion of the V8, the engine bay was shaved and smoothed to remove any and all holes and brackets. “The plan,” says Nick, “was to have an extremely simple engine bay that showed off the most beautiful aspects of the engine without the clutter of wiring and engine accessories.”


    The brake booster, he says, was removed and has been replaced with a full pedal assembly inside the car and then reservoirs were fabricated in-house for coolant, brake/clutch, and power steering fluids.

    These were then machined with threads that corresponded with the factory reservoir caps, giving the custom parts a factory appearance. As a result of this painstaking attention to detail the engine bay is nothing short of a work of art. It’s clean enough to eat your dinner off and it ensures that all eyes are immediately drawn to that V8, itself embellished with red painted rocker covers and a classic BMW roundel on the engine cover. A custom cold air feed, utilising a large velocity stack located in the passenger side high beam hole and an in-line filter, supplies the big V8 with all the air it can ingest. Elsewhere the Griot’s team has fitted V8 X5 exhaust manifolds with a custom T304 stainless steel exhaust system, while a custom driveshaft and 2.93 LSD-equipped rear end have also been fitted.

    Killer one-off styling and a sweet engine swap are all well and good but it’s only a job half done where a major project like this is concerned. Now came the turn of the chassis to be comprehensively overhauled. Step one involved removing the front and rear subframes and completely refreshing them, with both being reinforced in key areas before being powdercoated satin black. The E30 received polybushes throughout and camber adjustment was added to the rear trailing arms. “The front strut assemblies were sent to Ground Control and the guys there worked their magic, shortening and reinforcing the strut housings so we could get the car as low as we wanted,” explains Nick. “They also provided us with the Koni shocks, front camber plates, spring perches, and new springs that would accommodate the increase in weight from the V8.”

    With the Ground Control coilover setup endowing the E30 with pretty much the perfect ride height, all that was needed now was the perfect set of wheels to adequately fill those swollen arches. You’ve no doubt been staring at the pictures for a while now so you’ve probably identified what the Griot’s Motors team decided to fit: HREs. Is it wrong to get excited about HREs? Like, really, really excited? They just look so good here. Choosing a flat-faced wheel rather than the default dished design is a bit of a ‘woah’ moment but, despite being a thoroughly modern wheel, the classic crossspoke design brings to mind the BBSs that the E30 M3 originally wore so well. And that’s exactly why these 501Ms were selected for this build. They allowed the Griot’s team to keep that factory look while giving them the modern size and width options they wanted for an aggressive stance. And while deciding on the final colour took some time, the brushed gold that was chosen is not only gorgeous but a perfect match for that bright red body.

    Right now, you’re probably reeling because, let’s be honest, there’s a hell of a lot to take in here, but Griot’s isn’t finished with you just yet because now we come to the interior. And, well, it’s a bit special. Up front, the M3 theme has been carried over from the outside with reproduction tricolour M Tech cloth applied to the doorcards and front seats, a retrimmed M Tech I steering wheel with tricolour stitching, and an M gear knob.

    In the back, however, well that’s where everything goes crazy. The rear passenger and luggage area has been transformed into a mobile product display and valeting station: this is a car that can wash itself.

    Well, not literally, but you know what we mean. The rear seats have been replaced with a custom aluminium water tank and hose while the entire boot has been fitted with a custom enclosure that allows the entire range of Griot’s Garage detailing products and polishers to be displayed. The whole affair has been beautifully finished and looks magnificent. It’s a very different boot build to the ones we’re used to seeing but no less impressive.

    The Griot’s Motors E30 Touring is the vehicular embodiment of what Griot’s Garage and its skunkworks outfit stand for. It’s an incredible creation, one that’s come about from the vision and imagination of a small group of guys and one that could only have been created by people with nothing less than absolute passion for cars and for modifying them – because what kind of person decides to build a two-door Touring?

    So much care and attention has been poured into not just making sure that the end result looks absolutely perfect, which it does, but also making sure that everything has been built to the highest possible standard and finished to absolute perfection. The goal was to make a car that looked like it could have rolled out of BMW’s own factory, and this car is that and so much more. And beyond showcasing what Griot’s Motors is capable of creating, the on-board valeting station showcases what Griot’s Garage is all about. This really might be the cleanest car we’ve ever shot. Best of all, this Touring isn’t about to be tucked away or sold, it’s going to be hitting the 2017 shows across the USA. And after that it’s going into rotation for regular driving whenever anyone wants to because, after all, that’s what it was built for. And that makes us very happy indeed.

    “We went a little mad and cooked up a crazy vision for the car – one that had never been done before”

    DATA FILE #Griotʼs-Motors two-door #BMW-E30 / #BMW-V8 / #BMW-Touring / #BMW-E30 / #BMW-3-Series / #BMW-3-Series-E30 / #BMW-3-Series-Touring / #BMW-3-Series-Touring-E30 / #BMW / #Griot's-Garage / #BMW-E30-Griotʼs-Motors / #BMW-Touring-2-door / #BMW-E30-M60 / #BMW-E30-V8 / #Getrag / #HRE /


    FILE ENGINE AND TRANSMISSION 4.0-litre #V8 #BMW-E30-M60B40 / #M60B40 / #BMW-M60 / #M60 , custom engine mounts, rocker covers painted red, engine bay shaved and smoothed, custom coolant and power steering reservoirs, tucked wiring harness, custom cold air feed from full beam headlight hole, X5 exhaust manifolds, custom #T304 stainless steel dual 2.5” exhaust, #Getrag six-speed manual gearbox, fabricated transmission saddle, tunnel reinforcement, custom propshaft, 2.93 LSD rear end

    CHASSIS 8x17” (front) and 9x17” (rear) #HRE-501M wheels in brushed gold with 215/40 (front) and 235/40 (rear) Falken Azenis RT615K tyres, reinforced subframes, fully polybushed, rear trailing arm camber adjustment, shortened and reinforced front strut housings, fully-adjustable #Ground-Control coilovers with adjustable #Koni struts, camber plates

    EXTERIOR Full OEM steel E30 M3 body panels including front and rear quarter panels, E30 coupé doors, side skirts, M3 bumpers (front and rear), full respray in #PPG-Deltron Griot’s Red

    INTERIOR Seats and door panels retrimmed in reproduction M Tech cloth, retrimmed M Tech I steering wheel, six-speed M gear lever, new OE carpet, rear seats removed, custom aluminium water tank and hose, water jet-cut product display area in boot

    THANKS Thank you to our sponsors, HRE Wheels, Brembo Brakes and Ground Control Systems. Thank you to J-Rod & Custom, McFarland Upholstery, Kassel Performance, Falken Tire and the hard work of Forrest Davis and Tim Willard of Griot’s Motors – without them, this project would have never been completed

    “The plan was to have an engine bay that showed off the most beautiful aspects of the engine”

    Shaved and smoothed bay ensures that all eyes are on that V8 when the bonnet’s up.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    V8 E36 6.2-litre LS3-powered Saloon. Subtle on the outside, brutal on the inside, this super-clean M3 packs a 500whp V8 punch. Words: Elizabeth de Latour Photos: Jordan Unternaher

    STREET FIGHTER 6.2-litre #GM-LS3 / #V8-swapped / #BMW-E36 /

    It would seem that if you wish to insert a large, American V8 into a BMW then the E36 is the vehicle of choice. While BMW never put anything bigger than a straight-six into that capacious engine bay, Alpina squeezed eight cylinders under the bonnet for its B8 4.6 way back in #1994 , showing everyone that not only could it be done but that it was definitely a good idea.

    We must have featured more LS-swapped E36s than any other model of BMW that has undergone the heart transplant but we’re certainly not complaining. And how could you when you’re being stared down by an LS3 E36 M3 that’s as clean and downright sexy as Brian Cain’s example? The exterior exudes nothing but subtlety while the engine bay is clean enough to eat your dinner off. And the interior drives the point home that this E36 ain’t nothing to mess with…

    That Brian’s ended up with a hunk of American muscle in his E36’s engine bay is less of a surprise when you learn that his first car was a 1987 Pontiac Trans Am and that he currently owns no less than nine BMWs. This car is the perfect blend of home-grown V8 from his youth and the Bavarian marque that stole his heart ten years ago. “I was always fascinated by the engineering and the history of BMWs,” he tells us. “But I was never able to afford one while I was growing up. I love the history of automobiles and how they came to be. #BMW has always kept its roundel logo, the kidney grille design and the signature Hofmesiter kink on the rear quarter glass. Small details like that just speak to me.

    “My first BMW was actually this M3. As I was growing up, I remember the E36 M3 being released. It was such a great looking car. I had model cars of it and posters but I always thought it would be out of my reach. When I was finally able to afford one, I had to jump on it. I was searching for an E36 M3 Saloon. It had to be a Saloon. I wanted either Hell red or Dakar yellow and I found this red car in Las Vegas, about 2000 miles from where I live.” But when a car is good it’s worth travelling for, and this M3 was very good indeed. “It was a one-owner, low-mileage, flawless example,” Brian grins. “The next thing I knew, I’d booked a plane ticket and flew out to get the car. I drove it home over a three-day span, collecting a couple speeding tickets along the way!”

    Initially, the M3 served as Brian’s daily driver but, having grown up around hot rods, having owned a Trans Am, and having modified a selection of Hondas, the pieces of the puzzle begin to fall into place – although Brian never anticipated taking things quite this far. “I knew I was going to do coilovers, the exhaust, the wheels and other basic things,” Brian says. “And I drove the car as a daily driver for almost six years. It was always kept in amazing condition but after putting nearly 100k miles on it I wanted to redo it. I have always been into hot rods and V8 cars, so I knew I wanted to do an LS swap. This was still when LS swaps were relatively uncommon on these cars. I started to doing research on what I would need and how I would set everything up. I had a general plan on paper before I even started. I went to a local wrecking yard where I sourced an LS3 engine from a wrecked Corvette. I took it home and immediately stripped it back to a bare block.”


    Clearly the best time to add stuff that’s going to make even more power is while the engine is out of the car and no corners were cut when it came to slathering it in go-faster bits, as Brian explains: “Items I added included: Katech rod bolts; a high volume oil pump; CNC-ported heads; a custom grind cam; Comp push rods and rockers; LS7 lifters and seven-layer head gaskets; a ported intake manifold; a FAST 92mm throttle body and fuel rails; and 60lb injectors with Aeromotive Stealth fuel pump handle fuelling. The Vorshlag engine mounts are the only swapped parts used.

    Everything else was custom fabricated in-house at the shop Brian owns, MWorks Garage. The 4” intake was custom-made in-house and American Racing headers are mated to our custom dual three-inch exhaust. The cooling system utilises a Zionsville radiator with heat shrink hose clamps for a clean look and I made the entire engine harness from scratch; I wanted it clean looking to complement the shaved engine bay but still serviceable so the engine runs on a completely separate fuse box and control from the rest of the car. Everything under the hood is powdercoated by Killer Koatings in Covington, Kentucky. The transmission is a T56 from a 2002 Camaro SS which has been completely rebuilt as well. Pretty much anything you could do to strengthen the transmission has been done, and gears are changed through a custom MGW shifter. Mike at Proxses Tuning in Dayton, Ohio tuned the car and currently it produces 496whp and 477lb ft.” Brian says this with the sort of casual understatement you would not expect from someone with a V8-powered E36 putting out somewhere in the region of 550hp.

    Of course, putting together an engine that powerful is one thing but building a car that can handle it is another matter altogether, and no stone has been left unturned, no component left unmodified when it came to ensuring the chassis was up to the task. “The suspension has been completely overhauled,” says Brian, “with a combination of both stock and aftermarket parts.

    The coilovers are all completely custom and have been built using Ground Control custom valved double adjustable dampers and custom spring rate Eibach springs. We made the adjustable control arms in-house while camber is controlled through Vorshlag camber plates up front.” While the transmission had been suitably beefed-up to handle all that power and torque, Brian still had to ensure that it would actually reach the rear wheels without obliterating any components along the way, so the drivetrain has undergone some heavy modifications. Power is sent along a custom-made three-inch aluminium propshaft with 1350 U-joints to a Ford Mustang Cobra 8.8 IRS diff using a Detroit TrueTrac LSD with 4.10 gears and onto the wheels via DriveShaft Shop axles. “I went with the Ford differential after going through two 188mm BMW diffs and completely twisting up a subframe after the second differential broke apart,” says Brian.

    “Needless to say, it took some creative design, planning, and geometry to get everything working correctly together but it should be good for the 1000hp range.” This should provide ample future-proofing for whatever further mods Brian might have up his sleeve.

    With masses of power on tap, the importance of stopping cannot be overlooked and while this E36 hasn’t been fitted with a BBK, the brakes have been suitably uprated and are now more than up to the job. Brembo discs have been fitted along with Performance Friction pads and Bimmer World braided hoses. The ABS has been deleted and Brian has added a Tilton proportioning valve to adjust the brake bias.

    As far as the styling is concerned, Brian has opted to keep things subtle but, while at first glance this E36 might appear almost completely standard on the outside, there’s more going on here than meets the eye; there are lots of subtle modifications that are easy to miss. Up front, the foglights have been shaved to give the bumper a much cleaner, unique look and an AC Schnitzer front lip has been added to make the car look even lower. Euro headlights have been fitted and smoked indicators, markers and rear lights have been added. At the rear the boot spoiler has also been shaved.

    However, the most involved exterior modification, which also happens to be Brian’s favourite mod on the entire car, was a direct result of his wheel choice. “I have always been a fan of CCW wheels,” he says. “And I wanted a wheel that had my exact specifications and finish: 9x17” fronts and 10.5x17” rears. Killer Koatings of Covington, Kentucky did the powdercoating and I did this when black wheels were almost taboo, everyone was still running polished wheels. Now you see almost every company offering this look of gloss lips with matt faces. When we were fitting the wheels, we didn’t want excessive camber, so we cut the rear quarter panels under the rear bumper and pulled them out by almost an inch on each side. The result is factory-looking car (most people would never notice the wider rear arches) whilst still being able to fit an aggressive wheel with less than one degree of camber.” Once you know what he’s done here you know, but from anything other than the right viewing angle those pumped-up rear arches disappear completely, blending into that blindingly brilliant red bodywork. Even gazing down the car’s flanks you still need to know what you’re looking for to actually notice the subtle swelling.

    While the exterior is a picture of subtlety, the interior definitely means business and there are some choice mods in here. The original grey interior was swapped for an all-black one and Brian retrimmed the headlining and pillar panels in black suede. A pair of red and black Recaro Wildcat seats were added, along with red Scroth Racing harnesses, and there’s also a Nardi steering wheel and Euro M3 gauge cluster. The finishing touches are custom gear and handbrake gaiters made by Brian’s girlfriend Kaitlin, who runs StitchBoots and does custom automotive interior work.

    In case you couldn’t tell, we are big, big fans of Brian’s E36. The engine swap is awesome but it’s all the other performance upgrades that take this car to the next level. It’s the level of dedication that has been applied to every aspect of the build that makes it so special. A lot of work has been poured into this build and you can see it everywhere you look, it’s the sort of build you aspire to. There’s more to come, too, as Brian explains: “The car was recently sponsored by Vortech Superchargers who sent me a V3 setup. I hope to have it on soon, set in the 22-26lbs of boost range. It should make for a pretty wild ride.” Considering how wild this E36 already is, we can’t wait to see it.

    DATA FILE BMW #BMW-LS3 / #V8 / #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #BMW-M3-LS3-E36 / #BMW-M3-LS3 / #BMW-3-Series / #BMW-3-Series-E36 /

    ENGINE 6.2-litre V8 / #GM-LS3 / #Corvette-engine , #Katech rod bolts, Telling high volume oil pump, LS1 oil pan, LS1 accessory drive, SLP crank damper, CNC-ported heads, custom grind #Comp-Cams camshaft, Comp Cams pushrods, rockers and timing chain, #LS7 lifters, LS7 seven-layer head gaskets, #ARP head bolts, ported LS3 intake manifold, FAST 92mm throttle body, #FAST fuel rails, #DeatschWorks 60lb injectors, #Aeromotive-Stealth 340gph fuel pump, AN-6 fuel lines, Vorschlag engine mounts, MWorks Garage wiring harness, MWorks Garage throttle bracket, MWorks Garage full V-Band exhaust, American Racing Headers exhaust manifolds, Zionsvile radiator, #MWorks-Garage expansion tank, MWorks Garage four-inch intake

    TRANSMISSION 2002 #GM-Camaro-SS-T56 six-speed manual gearbox, #MGW shifter, steel shift forks, bronze shift pads, hardened steel bearing spacers and sleeves, #McLeod-RXT twin-disc clutch, Cincinnati Driveline propshaft, Ford 8.8 rear differential, Detroit TrueTrac LSD, 4.10 Ford Racing ring and pinion gear set

    CHASSIS 9x17” ET20 (front) and 10.5x17” ET20 (rear) #CCW-LM20 wheels with matt black centres and gloss black lips, 235/45 (front) and 255/40 (rear) Falken tyres, #Ground-Control double adjustable coilovers, #Eibach custom rate springs, Vorshlag camber plates, Ground Control rear upper shock mounts, MWorks Garage rear lower control arms, Treehouse Racing front LCA bushings, MWorks Garage LSx power steering setup, Tin Soldier Race Cars modified subframe, Performance Friction brake pads, #Brembo discs, Bimmer World braided brake hoses, ABS delete, Tilton proportioning valve, MWorks Garage ABS delete hardlines

    EXTERIOR Rear quarter panels widened one-inch, shaved front foglights, Shadowline grilles, Euro face-lift headlights, smoked corner lights, smoked side markers, smoked taillights, shaved rear spoiler, AC Schnitzer front lip, CQuartz Finest paint coating

    INTERIOR #Recaro-Wildcat seats, MWorks Garage seat brackets, #Nardi steering wheel, Euro M3 gauge cluster, Schroth Racing harnesses, #Bavarian-Sound-Werks speakers, suede headliner, A-, B-, C-pillars and rear deck, black interior conversion, #StitchBoots gear and handbrake gaiters

    THANKS I want to thank my parents first and foremost – they always told me to follow my dreams and supported me 100% in my decisions. Unfortunately, my mother passed away three months before we did this photoshoot. My girlfriend Kaitlin, owner at StitchBoots Automotive Interiors. She is with me every day at the shop, wanting to participate in all our projects. Eddie Wright and Greg Huber at Fast Eddies Auto Salon. Paul Montgomery at Eastside Auto Spa. Mike Pirnia at Proxses Tuning. Kenny Meade and Mike Karwath at Killer Coatings. Everyone at 1310 Motorsports
    Stream item published successfully. Item will now be visible on your stream.