Toggle Sidebar
News Feed

Currently filtering items tagged with #Prototype

  • Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Road to Daytona Ferrari Daytona Prototype. As Daytona model was a milestone for Ferrari so it was this car - the very first prototype of what became the 365 GTB / 4 "Daytona" - that started the process. Now it has regained its former glory after a ten-year restoration. Text: Jeroen Booij. Photo: Pieter E. Kamp.

    Leonardo Fioravanti, the man who created the name Pininfarina Ferrari Daytona. Even today, he considers it to be one of his masterpieces. Something that becomes particularly clear when trying to interview him about other things - and he still insists on talking about Daytonan.

    It was born more or less by accident. I saw a 275 GTS chassis, the open version of the 275 GTB, get on a truck. It was on the way to be fitted with a body, but the chassis was complete with wheels, engine, seats and steering wheel, albeit still quite naked. When I saw it I thought, "we are doing wrong - completely wrong." I started sketching and came up with a proposal for a new car.

    The boss said it was impossible to replace the 275 GTB already, the model was too new. But he liked what he saw and we showed it to Enzo Ferrari who fell for the profile and rear, but did not like the front. I had taken into account the very long wheel base of 275, something that had been done to the car felt like it had a little "too much" body. We changed the front and asked Ferrari once again - it was unusual that you had to do it - and now it was okay, he really liked it.

    So it was that 275 received a replacement after just over 800 built, but it was only after they felled a few prototypes to substitute. In fact, the very first of the six test series a completely different front than the Daytona we know, something Fioravanti had not told earlier. Neither he nor I had not any idea that the very unique car was about to be restored to original condition, and it is not far from my home in Holland. But you can not know everything. Something that also applies to the owner of the prototype. His name is Gerard van Bergen, is a 73-year-old car salesman who bought it in 2003 without knowing that it was a prototype! How can that be possible?

    Well, when is it going sometimes so fast that you do not have time to check the details, he says with a happy smile. Van Bergen has bought and sold the most during the greater part of his life, he started as a 17-year-old with dealing with livestock. When foot and mouth disease broke out operations in the second half of the 60s, he decided to switch to cars. Half a century later the Dutchman runs a small leasing company, has some properties and is still active as a car salesman, now with one of his sons. As a hobby, he has renovated several classics along with a friend, mostly Mercedes cars.

    We fixed a 300 SL Roadster, a brace, a pagoda and a 190 SL, which we turned into a 190 SLR. Slowly I became more and more interested in the Ferrari, too, he says. I bought a Testarossa, had a F512M and has repaired a crashed F40. But my dream was a GT-car from the 1960s. Then I came across this in Switzerland, it was in a sorry state but I managed to get it started and participated in a club rally in 2003.
    Do you have any idea about what it is? Asked one of the older members. Well, one item that needs an awful lot of work, I replied. Slowly it dawned on me that it really was a very special car and I had to find out its entire history. It took a year to sort out it.

    It was during the inquiries that van Bergen came in contact with the Ferrari expert Marcel Massini, who confirmed its prototype status. With chassis number 10287 proved to be the first of the six test cars, a 275 GTB-based creation that came into being in the spring of 1967. Scaglietti was commissioned to build the prototype of the Pininfarina and did so under the code name "Study 109". After it is mostly unclear. In fact, the car used for the test around the old aerodrome Modena, although it was never published.

    Since it was sold to an unknown owners even before the 365 GTB / 4 Daytona was unveiled in 1968. It then cost eight million lire (about the same price as for a new 275 GTB) and was recorded in Rome. The next owner, Gianpaolo Salgarella in Bologna, paid three million lira in 1972, but as the car is said to have been injured. Shortly thereafter, was exported to the US and found new homes, first in Georgia, then in Mississippi and Illinois, and finally in southern California.

    Somewhere in the chain got it a facelift, the colour changed from grey to red and headlights changed to some taken from a 275 GTB. Van Bergen believe it was to make the car more easily sold. - That it was a prototype did not mean much at the time. But the 275 GTB had been coveted for some time, so maybe it had something to do with it, he says.

    Rebuilt yet again, this time to Daytona with the hood over the headlights, the car was found in 1988 a new owner of Dutchman Henk van de Meene. He put it in his Swiss garage and sold it since the beginning of the 1990s to another man in Switzerland. Then it took another ten years before Van Bergen became the ninth owner. Shortly after he bought decided he decided to start a thorough restoration. The first idea was to do it in-house, along with his friend, but it soon became apparent that the job demanded specialists. - With lots of patience, we manufactured a manifold but when a Ferrari club member came to take a look, he said "what on earth are you doing? I know you like Mercedes, but this is totally wrong, and it must be easier. "

    It was only to begin anew. Of the few photographs we had revealed that the whole body changed slightly. And of the right headlamp, we had just left the house, but sat on the left side! The rear fenders were also bad and needed lots of new material. At the same time began to hunt for the headlights of the correct type. - Fiat 850 Spider have similar lights, but the glass on them are ribbed and the pictures we had we could see that Ferraris was not. It took me two years to find out what they were, Carello number so and so. Then I found a couple in the US and the guy wanted 1250 dollars for them. Sure, I could have let manufacture new but what it did not cost! In addition, I wanted the real thing, no copies. I always thought that it is worth the price in the end.

    Judging by the results, it is just as when it left Maranello. The leather-wrapped instrument panel, aluminium, paper mill used as insulation behind the door panels, the primer is applied to the body to a year before it had the grey colour - a cellulose lacquer to the original factory specifications ...

    Then it was the engine. If perchance thought that the body was the oddest of this unique car, it's time to reconsider. Under the bonnet sits namely the world's only #Lampredi-V12 engine of the "243-type". There is an experimental machine with dry sump, two spark plugs per cylinder and three instead of four valves per cylinder. The foundation is a 330 GT-block taken up to 4380 cc, yet it is the cylinder heads, which is the most unique of the machine. Engine Builder Alex Jansen of Forza Service claims that the engine is experimental and probably made the competition department.

    The cylinder heads are completely flat, which means that the combustion chambers located in the piston tops. That, and the tight angle between the valves, makes the dual camshafts can fit in a single cam housing. To fit the dual plugs has moved to the outside of the peaks. The only thing unchanged is the assembly of the six dual Weber 40 DCN carburettors, but the characteristic air filter box is missing and instead sits six pairs of open intake trumpets on Ferrari racing cars. The only engine I've seen that, in addition to the spark plug placement, similar to this is the race car 330 P4! And as it sounds! Van Bergen hit at the gas pump and turn on the small key. The starter motor turns slowly and it takes a few laps before the twelve cylinders filled and the engine slams started with a characteristic metallic sound. - This is hardly the perfect car for the winding back roads, he says, trying to drown out the rumbling V12. It needs a little turns and thrives best if you wait to switch to at about 7000 revolutions ... First he warms up gently. When the temperature reading is 90 degrees his pedal and the prototype as well as lifts, starts dancing back and leave everyday traffic in the rear-view mirror. At lower speeds it spits a little, "camshafts" said engine builder Jansen and refers to machine racing shield.

    But as soon as a straight pop up, things happen. As the lap increases the beast begins to breathe properly and it is then, when the needle on the tachometer suddenly shoots up, you get goose bumps. Compared with all modern sports and GT cars is its position in the leather, contoured seat remarkably high. That, along with the narrow A-pillars, gives a great overview. The long hood stretches out along the way and the main four instruments are all gathered behind Nardiratten. The large tachometer graduated up to 8000, but the red mark begins in 7000, meaning that van Bergen is not afraid to use the unique machine and he revving happily past the 7000.

    The instrument panel itself is simpler than in the later production cars that had the eight instruments combined. Here are some conditioned place in the middle along with six toggle switches. Moreover, there is a very Italian cigarette lighter - no longer will be used ...

    The odometer shows 32,400 kilometres - have resisted the temptation to set it back to zero and van Bergen has only driven a few mil since the car's restoration was completed.

    Ferrari, however, has been traveling back and forth to Italy a few times, but then in a covered trailer. First, it was taken to the manicured lawns of the Villa d'Este. From van Bergen made a small detour to Maranello on the way back to see the car for Marco Arrighi at Ferrari Classiche.

    The only thing missing was the car namely the coveted Classic. There appeared, however, up an unexpected problem, namely Arrighi found some sketchy pictures of the car, but they were still clear enough to show that it originally had three instead of two tail lights! After an eye Spirit showed it to be true, and Van Bergen looked forced and compelled to cut new holes in the stern of the newly restored car!

    When offered Ferrari Classiche to help him, they had even hired an old retired guy from Scaglietti bodywork which once installed these light units!

    It was great, but even if it was #Ferrari-Classic felt nervous. It was like handing over one of my children to an unknown surgeon. It was almost as if I persisted in getting to sleep next to the car...

    Finally, after seven sorrows and eight afflictions almost ten years, is the van Bergen pleased with the end result. And it is also the Ferrari, which is well proven to be borrowed car over the summer and put it in his museum in Maranello.

    The question is what Gerard van Bergen dream car now, when this is done? He thinks, and shines up: - A Daytona Competizione - a standard Daytona is just too "normal" for this project...

    TECHNICAL DATA #Ferrari-Daytona-Prototype / #1967 / #Ferrari-Daytona / #Ferrari
    Engine: V12, 3 valves per cylinder, dual ignition, dry sump, capacity 4380cc
    Maximum power DIN 352 hp at 7500rpm
    Maximum torque DIN 300 Nm at 5000rpm
    Transmission: Five-speed, manual gearbox fitted together with the diff - transaxle-type
    Body and Chassis: Steel Body on steel frame, double wishbone and coil springs and anti-roll bars front and rear.
    Dunlop disc brakes all around.
    Tyres Michelin XWX 205/70 VR14
    Weight 1,350kg.
    0-62 MPH 0-100 kph about 6.5 seconds.
    Top speed of about 280 kph
    Price: New 1968 8 000 000 lire.
    Today, it is invaluable.

    Probably only gone as little as 3240 miles, but in that time it has had a number of different fronts.

    Ferrari Daytona #Prototype #V12

    With two tight overhead camshafts under the same cover is unique cylinder heads. Furthermore, the plugs located on the exterior and the entire combustion chamber can fit in plunger tips when the tips are completely flat underside. According to the experts, the engine is based on a 330-drilled block and reminiscent of the one in the racing car 330 P4, even if it is not quite like. Probably, it is built as an experiment.

    Under the bonnet will we as expected V12 machine.
    But this time it is completely unique to this copy.
    Decor is your own mix of different Ferrari models of time. Dashboard is quite different from the one that came in Daytona.
    Front remind me of the 275 GTB, but my party is definitely Daytona. And the three rear lights is only remarkable.
    Stream item published successfully. Item will now be visible on your stream.