- Post is under moderationThis E36 M3 R is one of the rarest of the rare, but that didn’t stop one owner beefing it up to be a full-on track terror. Words and photos: Chris Nicholls.
FULL-ON BMW-E36 / BMW-M3 R Hardcore Australian special
GYM JUNKIE UNICORN Ultra-rare E36 M3 R from Oz
Just 12 E36 M3 Rs were made available to the public back in the mid ’90s by #BMW Australia. Built, as some of you may know, to be the ultimate non-GTR E36, the cars were basically Group N racers for the road. They came with full Motorsport Group N suspension, a tweaked engine putting out 325hp (more than any E36 M3 other than the GTR), AP Racing four-piston brakes all-round, the full M3 GT bodykit, plus Super Tourer wing and extendable splitter, and almost all creature comforts, such as rear seats, air-conditioning and fog lights, removed. Developed by the legendary Paul Rosche, then M GmbH’s head of motorsport, and team members from the famous Australian Frank Gardner’s outfit, including Ralph Bellamy - former F1 engineer and one of the men responsible for inventing ground effects at Lotus - the M3 R remains to this day arguably the greatest E36 variant you can actually buy, albeit one that required a racing license when purchasing it new and one that is, unsurprisingly, also climbing in value today.
Which makes it all the more bizarre that this M3 R’s previous owner, Alan Palser, decided to tune it so much there’s basically nothing left of the original car bar the little silver build plate on the centre console. To whit, there’s the DTM Fiber Werkz widebody kit, JRZ dampers with Eibach springs, Turner front and SM Motorsport custom rear anti-roll bars, SM Motorsport custom control arms, Alcon monobloc front and AP Racing rear calipers and two-piece slotted discs, AP racing twin-plate clutch, boot-mounted Speed Master fuel cell with Bosch 044 pump and swirl pot and a range of engine mods, including a very sexy CSL-style carbon airbox, which bring the power up to around 370rwhp. In a car running Hankook slicks on its 11x18” Apex EC-7 wheels, and weighing only 1220kg thanks to being completely stripped and caged, that makes this is one rapid racer indeed. But one that isn’t really much of an M3 R anymore.
So why did Alan do it? Well, there were two main reasons. The first is an all-too familiar story. Having fallen in love with BMWs as a lad growing up in the Group A era, Alan decided he had to have one, and eventually managed to fund the purchase of his third-hand M3 R ten years ago when it had just 40,000km on the clock. However, as one does, he started to chat more and more to people in the club scene and eventually got talked into attending a few track days. And that’s when the bug bit, hard.
“At the time I bought it, I would say the plan was to have it as a road car, but having started to talk to some people in car clubs, they said, ‘Oh, you should come down and join the club and have a go on the track on a club day’. Then once I’d done that a couple of times, I thought, ‘Oh yeah, I think I’m going to enjoy this’. So I once I’d done a couple of those, I started orienting the E36 more towards that and less as a car to drive on the road.”
And once Alan started, he found it hard to stop, spiralling down that route we all know of upgrading ever more bits and pieces. “Once I was on that path, it was easier to continue on it, rather than scrap it and go back to a start point again,” he says. Eventually, after entering a couple of tarmac rallies, Alan decided it was time to develop it fully and, having sent it off to BMW whiz Sam Markov at SM Motorsport in Wodonga on the Victoria/New South Wales state border, things just got even more extreme, eventually leading to a wilder state than it is in now (this engine is its second after the previous fully-built and E85-tuned beast blew prior to the sale to its current owner). As for the second reason, that was more to do with the used car market at the time. Although it might seem silly in today’s climate, despite its rarity, engineering pedigree and extremely finely-honed nature out of the box, the M3 R wasn’t actually all that valuable ten years ago. You could pick one up for less than AU$50,000 (around £25,000) and there wasn’t a sense that they would be a future collectible. Hence why Alan says “I didn’t feel like I was totally killing something that was worth a lot of money at the time.” Of course, thinking about it now, he agrees that were he to do it all again, he would have started with a basic 3 Series shell, but such is life.
Eventually, having arrived at a development crossroads, Alan was unsure whether to replace the engine with an S85 V10 or the like, or sell it to fund something like a Z4 GT3. In the end he decided to part with it, which is where current owner and Avis franchise holder (hence the stickers) Les Sears comes into the picture. A Holden man for much of his time in motorsport, one drive of an E46 back when it was new changed his life forever and after that, Les became a devoted BMW fan, building up quite an impressive collection that currently includes a stock E36 M3, three E46 M3s (one road car, one complete racer and another in the build) and an F82 435i daily. Hence why, when he found out this car was up for sale about a year and a half ago, knowing how rare it was and how much effort had gone into it, he pounced on it.
Of course there was still the matter of the blown engine to take care of before he could enjoy it at his local motorkhanas and track days, and given the previous highly-strung motor’s issues, and the fact the chassis set-up was good enough to ensure speed without huge power, Les decided to tone down the new power plant a little in order to keep it reliable. Thus, right now, it runs a completely stock 3.2-litre bottom end, and only the aforementioned carbon airbox with custom trumpets (on stock runners), K&N pod filter, ARP rod bolts, 296º Schrick cams, Vanos delete and Motec M600 ECU as mods. Despite this, thanks to Sam Markov’s nous (Les kept him on as the car’s mechanic, as unlike for Alan, Sam was local), the car puts down 367hp at the wheels, which as we said is still plenty in a circa-1200kg car, and easily enough to keep Les at the top of the time sheets at whatever event he enters. “Everywhere you take it, if it doesn’t win, it’s always second or third. It’s a quick little car. It’s very, very well balanced, and it doesn’t do it with horsepower, it does it with cornering speed,” he says.
Despite its pace and the fact it’s no longer much of an M3 R though, Les has no desire to risk such a rare car (even in its current state) in actual racing, saying “I’m a little reluctant [to race it]. I don’t mind doing the sprints in it, but once you get into a race meeting, I’d hate to damage it. I’ve got an E46 [an ex-Targa Tasmania machine, no less] which can take a bit of a hit and it’s easy to panel beat, but this thing with that body kit on it, it’s quite hard to start rebuilding that. I’ve got a new E46 being built as we speak too, and when that’s finished I’ll put this car up on blocks and leave it there and won’t race it at all”.
Now, given he’s only had the car for less than two years, such a plan might sound impossibly sad, but it’s actually part of a grander scheme to leave it in as good a condition as he can for his son, who also races. Essentially, Les says that he’ll take the M3 R out every so often just to keep it running until his son takes it over, and continue racing in the new E46 once that’s built. “It’s a new shell that we’ve got in another shed with a new cage through it and I’ve bought all the parts for it. I’ve just got to assemble it, basically,” he says. “I’ll do that the same way - it’ll have a 3.2-litre in it, but the bottom end won’t be stressed out and we’ll just get it to breathe.”
Hopefully both cars can see the use they deserve for many years to come, as although Les is now 69, he has no plans to stop racing anytime soon, and that’s the sort of thing we love to hear. If, however, he does eventually decide to give the game away, not only will he have his son to look after the cars, he’ll also still be able to enjoy them in other ways, saying that “I just get a kick of out of being in the shed and having a cup of coffee with the cars… And they’re not as noisy as the wife!”
S50B32 straight-six has been fitted with #VAC Vanos delete kit, among many other mods, and now makes 367whp.
Carbon blanking plates are most definitely at home in the stripped-out interior.
“Everywhere you take it, if it doesn’t win, it’s always second or third. It’s a quick little car”
DATA FILE / #BMW / #BMW-E36 / #BMW-M3-R / #Apex / #BMW-M3-R-E36 / #BMW-M3-E36 / #Motec-M600 / #Motec / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-M3-E36
ENGINE AND TRANSMISSION 3.2 litre straight-six #S50B32 / #BMW-S50 / #S50 , #K&N pod filter, custom carbon airbox with OEM runners and custom trumpets, #Schrick 296º cams (inlet and exhaust), #VAC-Motorsports Vanos delete kit, #ARP rod bolts, #NGK spark plugs, #Bosch-440cc /min injectors, Bosch-044 fuel pump, custom swirl pot, #Speed-master fuel cell, Evosport underdrive pulley, Turner Motorsport solid engine mounts, SM Motorsport stepped headers, custom 2.5” stainless steel exhaust and silencer, #Motec-M600-ECU . Five-speed manual gearbox, #AP-Racing twin-plate 7.25” clutch, stock M3 R flywheel, #OS-Giken-LSD
CHASSIS 11x18” ET25 (front and rear) #Apex-EC-7 wheels in Anthracite with 20mm spacers (front and rear) and 280/650 - 18 Hankook slicks (front and rear), #JRZ-RS dampers with #Eibach springs, #Turner-Motorsport (front) and SM Motorsport (rear) anti-roll bars, SM Motorsport custom front suspension arms to increase track by 100mm, #SM-Motorsport custom rear trailing arms, SM Motorsport custom bearings and rod-ends, Whiteline front strut bar, Alcon monobloc four-pot calipers with 355x32mm two-piece slotted rotors and Ferodo DS1.11 pads (front), AP Racing four-pot calipers with 330x28mm two-piece slotted rotors and Ferodo DS2500 pads (rear), AP Racing fluid, SM Motorsport custom braided lines and custom pedal box
EXTERIOR DTM Fiber Werkz wide-body kit (customised by SM Motorsport), custom Topstage Composites front bumper and carbon splitter, #APR-Performance rear wing
INTERIOR Brown Davis roll-cage, short-shift kit, RPM SL S/W Comfort suede steering wheel with quick-release hub, Velo Apex-XL seat, Sparco harnesses, carbon blanking plates for centre console and gauge pod, Racepak displayStream item published successfully. Item will now be visible on your stream.