- Post is under moderationWILD 600HP E36 Elite D’s turbo’d 3 Series
This Elite Developments 600hp E36 is the result of years of development and a love for all things turbocharged… Words: Ben Koflach. Photos: Steve Hall.
Elite Developments’ turbo E36
THE BOOSTED ELITE
The E36 328i Sport is a car that’s been appreciating in value of late. However, six years ago they didn’t quite have the same worth and so made the perfect project base for Steve Dixon, owner of BMW-specialised tuning shop Elite Developments. Steve’s plans soon escalated from a simple reworking to a complete overhaul, complete with a 600hp turbocharged heart…
“I bought the car off eBay completely unseen. It was down in Bognor Regis,” Steve explains. “At the time it was really difficult to get a 328i Sport as there wasn’t many of them for sale. I contacted the guy and made him an offer based on his description of the condition and the pictures on eBay. I then took a four-hour train journey from Essex to go and get it. It was a completely mint, standard car, as described. I was looking for one to convert into a drift car.
“Initially my plans were just to weld the diff and put some coilovers on it, and that was it. I fitted the coils while my mate welded the diff. It was just going to be a daily drifter but then we went to Gatebil 2012 and saw that nearly every BMW there was running a turbo M5x engine. That got me thinking…
“After speaking to a few of the locals about how they’d done it, I came to the realisation that building a turbo #BMW wasn’t as hard as I first thought. Then came the process of pricing up all the bits I needed.”
The 328’s alloy-block M52 isn’t the perfect base for turbocharging as they tend to allow the head to lift and generally aren’t as strong as iron block variants, so Steve sourced an #M50B25-non-Vanos engine and set about making a hybrid of the two. This meant using the M50 block, head and pistons but with the M52’s crank and rods, creating a 2.8-litre M50 – an ‘M50B28’ as they’re often known. The bottom end was tied together with coated big-end bearings and ARP bolts, with #ARP studs and a Cometic 0.140” multi-layer steel head gasket used up top for a drop in compression and an increase in reliability.
The end result is an engine about as strong as it’s possible to get without going for fullon aftermarket forged rods and pistons – perfect for Steve’s plans for big boost.
“The hardest part was trying to source a right-hand drive turbo manifold as nobody seemed to sell one,” Steve explains. “This is why we started to design what is now the Elite Developments cast RHD turbo manifold. It took three years to create but we are now very happy with the final product.”
The Elite Developments manifold was formulated to fit all M5x engines that use a four-bolt-per-cylinder pattern, fitting around all of the steering and usual headache areas and allowing bottom-mount fitment of any T3-flanged turbo along with an external wastegate. Steve’s particular setup uses a Garrett GT3582R turbo and a Tial 38mm wastegate, pushing boost through a 600x300x80mm intercooler and into the M50 intake manifold.
Air is sucked into the turbo through a K&N filter, while fuelling is taken care of with Siemens 60lb injectors and a Walbro 255lph pump. To keep oil temperatures in check, Steve’s used an S50 oil filter housing converted to run AN lines, which are linked to a Mocal oil cooler. A neat product from Elite Developments allowed the intercooler and oil cooler to be bolted into the E36’s front end without any troubles. To control the whole thing Steve’s used a VEMs standalone ECU with the result being a dyno-proven 495hp and 480lb ft at 0.8bar. Steve has since had it mapped to run at 1.5bar which should be good enough for around 600hp.
All that power is well and good but without being able to transmit it to the ground, it’s useless. Steve retained the strong five-speed ZF gearbox that came with the 328i, with a six-paddle ceramic clutch sandwiched between it and the boosted M50. Out back is a 328i Sport 2.93 LSD, rebuilt for a 40% lockup and braced into position to guard against failure.
The final step of getting power to the ground is, of course, the wheel and tyre setup. The E36 isn’t always the easiest car to get a wide tyre onto but Steve solved that with a set of ABS plastic rivet-on arches from US firm Hard Motorsport. These have allowed the comfortable fitment of 8.5x18” front and 10x18” rear Rota Grids wrapped in grippy 235/40 and 265/35 Yokohama Advan AD08s respectively. Not only do they look great but they enable fast progress when the M50 comes up on boost. The arches offer a rub-free fit, too.
The chassis setup has seen plenty of work to get it all working happily, both when travelling in a straight line and sideways. Before anything was bolted underneath it Steve took care of the usual E36 weak spots using parts raided from the Elite Developments stock room. Subframe mounting and trailing arm pocket reinforcement plates were welded into the shell, with the front crossmember reinforced to stop the engine mounts tearing themselves free.
To get the steering lock that Steve needed for drifting, TND extended lower arms and modified hubs were fitted, along with BC Racing coilovers and an E46 330i brake setup. At the rear Steve used BC Racing again to convert the suspension from a shock and spring setup to a true coilover one, adding adjustable camber arms to get the setup dialled-in. Finally the whole lot has been polybushed and Steve’s added a BMW front lower crossbrace as well as GCFabrications front and rear strut braces to stiffen the shell.
Another element that adds stiffness is the Safety Devices roll-cage, nicely painted in contrasting Porsche GT3 RS green – aside from that the interior doesn’t contain a great deal as weight reduction has been the main aim. The rear firewall has been nicely blocked off with an Elite Developments plate and there’s a supportive Recaro bucket for the driver, complete with four-point harness.
Recent additions to the exterior have included a genuine Rieger carbon-fibre GT splitter and a new Elite Developments product: a huge rear wing. However, sadly, since our shoot Steve has actually broken the car for parts, moving his M50 turbo experience onto a cool new project – a Techno violet E34 525i.
Steve’s E36 goes to show that we can all get carried away – even the simplest intentions can turn into a far bigger project than originally planned, especially with a little inspiration from overseas. It also shows how experiencing a problem can turn up a great solution – Elite Developments’ turbo manifolds have now been selling for almost a year, helping RHD BMW drivers all over the UK solve the somewhat historic issue of steering clearance when running a turbo. From a hardcore E36 drifter Steve’s now looking to add some turbocharged flair to his old-school Five, and we can’t want to see what happens next.
“We saw that nearly every BMW there was running a turbo M5x engine. That got me thinking”
DATA FILE / #BMW-Elite-Developments / #BMW-E36 / #BMW / #BMW-E36-Elite-Developments / #BMW-328i-Sport / #BMW-328i-E36 / #BMW-328i-Sport-E36 / / #BMW-328i-Elite-Developments / #Elite-Developments / #BMW-328i-Elite-Developments-E36 / #Rota-Grid / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series-Coupe / #BMW-3-Series-Coupe-E36
ENGINE ‘ #M50B28 ’ #non-Vanos , #M50B25 block and head, #M52B28 / #M50 / #BMW-M50 crankshaft and con rods, M50B25 pistons, performance coated main bearings, performance coated big-end bearings, ARP rod bolts, #ARP head studs, #Cometic 0.140” MLS head gasket, Elite Developments RHD turbo manifold, #Garrett-GT3582R turbo, #Tial 38mm wastegate, #K&N filter with #GCFabrications heat shield, ram air feed from foglight, AC #Schnitzer exhaust, #Siemens 60lb injectors, #Walbro 255lph fuel pump, #VEMS-ECU , Mocal oil cooler with AN lines, S50 oil filter housing, #Vorschlag nylon competition engine mounts
TRANSMISSION E36 328i five-speed #ZF-manual-gearbox , six-paddle ceramic clutch, Elite Developments bolt-through polyurethane gearbox mounts, #IRP shifter, 328i Sport 2.93:1 LSD fully rebuilt with 40% lockup, diff brace
CHASSIS 18x8.5” (front) and 18x10” (rear) #Rota-Grid-Drifts with 235/40 (front) and 265/35 (rear) Advan Neova AD08 tyres, Elite Developments wheel stud conversion, full #BC-Racing coilover setup with 12kg front and 8kg rear spring rates, TND modified hubs for extra lock, TND extended lower arms, adjustable camber arms, polybushed throughout, Elite Developments front subframe reinforcement kit, Elite Developments rear subframe reinforcement kit, Elite Developments rear trailing arm reinforcement kit, Elite Developments rear topmount reinforcement kit, #BMW-Motorsport front crossbrace, #GC-Fabrications front and rear strut braces, E46 330i front brakes, E36 M3 Evo brake servo and master cylinder
EXTERIOR Rieger carbon fibre GT splitter, Hard Motorsport rivet-on wide arches, Elite Developments rear spoiler, foglight air intake
INTERIOR Safety Devices roll-cage painted in Porsche GT3 RS green, Elite Developments rear firewall block-off plate, Recaro driver’s seat, AEM wideband AFR gauge, Defi boost gauge
CONTACT www.elite-d.co.ukStream item published successfully. Item will now be visible on your stream.