- Post is under moderationThis E36 M3 R is one of the rarest of the rare, but that didn’t stop one owner beefing it up to be a full-on track terror. Words and photos: Chris Nicholls.
FULL-ON BMW-E36 / BMW-M3 R Hardcore Australian special
GYM JUNKIE UNICORN Ultra-rare E36 M3 R from Oz
Just 12 E36 M3 Rs were made available to the public back in the mid ’90s by #BMW Australia. Built, as some of you may know, to be the ultimate non-GTR E36, the cars were basically Group N racers for the road. They came with full Motorsport Group N suspension, a tweaked engine putting out 325hp (more than any E36 M3 other than the GTR), AP Racing four-piston brakes all-round, the full M3 GT bodykit, plus Super Tourer wing and extendable splitter, and almost all creature comforts, such as rear seats, air-conditioning and fog lights, removed. Developed by the legendary Paul Rosche, then M GmbH’s head of motorsport, and team members from the famous Australian Frank Gardner’s outfit, including Ralph Bellamy - former F1 engineer and one of the men responsible for inventing ground effects at Lotus - the M3 R remains to this day arguably the greatest E36 variant you can actually buy, albeit one that required a racing license when purchasing it new and one that is, unsurprisingly, also climbing in value today.
Which makes it all the more bizarre that this M3 R’s previous owner, Alan Palser, decided to tune it so much there’s basically nothing left of the original car bar the little silver build plate on the centre console. To whit, there’s the DTM Fiber Werkz widebody kit, JRZ dampers with Eibach springs, Turner front and SM Motorsport custom rear anti-roll bars, SM Motorsport custom control arms, Alcon monobloc front and AP Racing rear calipers and two-piece slotted discs, AP racing twin-plate clutch, boot-mounted Speed Master fuel cell with Bosch 044 pump and swirl pot and a range of engine mods, including a very sexy CSL-style carbon airbox, which bring the power up to around 370rwhp. In a car running Hankook slicks on its 11x18” Apex EC-7 wheels, and weighing only 1220kg thanks to being completely stripped and caged, that makes this is one rapid racer indeed. But one that isn’t really much of an M3 R anymore.
So why did Alan do it? Well, there were two main reasons. The first is an all-too familiar story. Having fallen in love with BMWs as a lad growing up in the Group A era, Alan decided he had to have one, and eventually managed to fund the purchase of his third-hand M3 R ten years ago when it had just 40,000km on the clock. However, as one does, he started to chat more and more to people in the club scene and eventually got talked into attending a few track days. And that’s when the bug bit, hard.
“At the time I bought it, I would say the plan was to have it as a road car, but having started to talk to some people in car clubs, they said, ‘Oh, you should come down and join the club and have a go on the track on a club day’. Then once I’d done that a couple of times, I thought, ‘Oh yeah, I think I’m going to enjoy this’. So I once I’d done a couple of those, I started orienting the E36 more towards that and less as a car to drive on the road.”
And once Alan started, he found it hard to stop, spiralling down that route we all know of upgrading ever more bits and pieces. “Once I was on that path, it was easier to continue on it, rather than scrap it and go back to a start point again,” he says. Eventually, after entering a couple of tarmac rallies, Alan decided it was time to develop it fully and, having sent it off to BMW whiz Sam Markov at SM Motorsport in Wodonga on the Victoria/New South Wales state border, things just got even more extreme, eventually leading to a wilder state than it is in now (this engine is its second after the previous fully-built and E85-tuned beast blew prior to the sale to its current owner). As for the second reason, that was more to do with the used car market at the time. Although it might seem silly in today’s climate, despite its rarity, engineering pedigree and extremely finely-honed nature out of the box, the M3 R wasn’t actually all that valuable ten years ago. You could pick one up for less than AU$50,000 (around £25,000) and there wasn’t a sense that they would be a future collectible. Hence why Alan says “I didn’t feel like I was totally killing something that was worth a lot of money at the time.” Of course, thinking about it now, he agrees that were he to do it all again, he would have started with a basic 3 Series shell, but such is life.
Eventually, having arrived at a development crossroads, Alan was unsure whether to replace the engine with an S85 V10 or the like, or sell it to fund something like a Z4 GT3. In the end he decided to part with it, which is where current owner and Avis franchise holder (hence the stickers) Les Sears comes into the picture. A Holden man for much of his time in motorsport, one drive of an E46 back when it was new changed his life forever and after that, Les became a devoted BMW fan, building up quite an impressive collection that currently includes a stock E36 M3, three E46 M3s (one road car, one complete racer and another in the build) and an F82 435i daily. Hence why, when he found out this car was up for sale about a year and a half ago, knowing how rare it was and how much effort had gone into it, he pounced on it.
Of course there was still the matter of the blown engine to take care of before he could enjoy it at his local motorkhanas and track days, and given the previous highly-strung motor’s issues, and the fact the chassis set-up was good enough to ensure speed without huge power, Les decided to tone down the new power plant a little in order to keep it reliable. Thus, right now, it runs a completely stock 3.2-litre bottom end, and only the aforementioned carbon airbox with custom trumpets (on stock runners), K&N pod filter, ARP rod bolts, 296º Schrick cams, Vanos delete and Motec M600 ECU as mods. Despite this, thanks to Sam Markov’s nous (Les kept him on as the car’s mechanic, as unlike for Alan, Sam was local), the car puts down 367hp at the wheels, which as we said is still plenty in a circa-1200kg car, and easily enough to keep Les at the top of the time sheets at whatever event he enters. “Everywhere you take it, if it doesn’t win, it’s always second or third. It’s a quick little car. It’s very, very well balanced, and it doesn’t do it with horsepower, it does it with cornering speed,” he says.
Despite its pace and the fact it’s no longer much of an M3 R though, Les has no desire to risk such a rare car (even in its current state) in actual racing, saying “I’m a little reluctant [to race it]. I don’t mind doing the sprints in it, but once you get into a race meeting, I’d hate to damage it. I’ve got an E46 [an ex-Targa Tasmania machine, no less] which can take a bit of a hit and it’s easy to panel beat, but this thing with that body kit on it, it’s quite hard to start rebuilding that. I’ve got a new E46 being built as we speak too, and when that’s finished I’ll put this car up on blocks and leave it there and won’t race it at all”.
Now, given he’s only had the car for less than two years, such a plan might sound impossibly sad, but it’s actually part of a grander scheme to leave it in as good a condition as he can for his son, who also races. Essentially, Les says that he’ll take the M3 R out every so often just to keep it running until his son takes it over, and continue racing in the new E46 once that’s built. “It’s a new shell that we’ve got in another shed with a new cage through it and I’ve bought all the parts for it. I’ve just got to assemble it, basically,” he says. “I’ll do that the same way - it’ll have a 3.2-litre in it, but the bottom end won’t be stressed out and we’ll just get it to breathe.”
Hopefully both cars can see the use they deserve for many years to come, as although Les is now 69, he has no plans to stop racing anytime soon, and that’s the sort of thing we love to hear. If, however, he does eventually decide to give the game away, not only will he have his son to look after the cars, he’ll also still be able to enjoy them in other ways, saying that “I just get a kick of out of being in the shed and having a cup of coffee with the cars… And they’re not as noisy as the wife!”
S50B32 straight-six has been fitted with #VAC Vanos delete kit, among many other mods, and now makes 367whp.
Carbon blanking plates are most definitely at home in the stripped-out interior.
“Everywhere you take it, if it doesn’t win, it’s always second or third. It’s a quick little car”
DATA FILE / #BMW / #BMW-E36 / #BMW-M3-R / #Apex / #BMW-M3-R-E36 / #BMW-M3-E36 / #Motec-M600 / #Motec / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-M3-E36
ENGINE AND TRANSMISSION 3.2 litre straight-six #S50B32 / #BMW-S50 / #S50 , #K&N pod filter, custom carbon airbox with OEM runners and custom trumpets, #Schrick 296º cams (inlet and exhaust), #VAC-Motorsports Vanos delete kit, #ARP rod bolts, #NGK spark plugs, #Bosch-440cc /min injectors, Bosch-044 fuel pump, custom swirl pot, #Speed-master fuel cell, Evosport underdrive pulley, Turner Motorsport solid engine mounts, SM Motorsport stepped headers, custom 2.5” stainless steel exhaust and silencer, #Motec-M600-ECU . Five-speed manual gearbox, #AP-Racing twin-plate 7.25” clutch, stock M3 R flywheel, #OS-Giken-LSD
CHASSIS 11x18” ET25 (front and rear) #Apex-EC-7 wheels in Anthracite with 20mm spacers (front and rear) and 280/650 - 18 Hankook slicks (front and rear), #JRZ-RS dampers with #Eibach springs, #Turner-Motorsport (front) and SM Motorsport (rear) anti-roll bars, SM Motorsport custom front suspension arms to increase track by 100mm, #SM-Motorsport custom rear trailing arms, SM Motorsport custom bearings and rod-ends, Whiteline front strut bar, Alcon monobloc four-pot calipers with 355x32mm two-piece slotted rotors and Ferodo DS1.11 pads (front), AP Racing four-pot calipers with 330x28mm two-piece slotted rotors and Ferodo DS2500 pads (rear), AP Racing fluid, SM Motorsport custom braided lines and custom pedal box
EXTERIOR DTM Fiber Werkz wide-body kit (customised by SM Motorsport), custom Topstage Composites front bumper and carbon splitter, #APR-Performance rear wing
INTERIOR Brown Davis roll-cage, short-shift kit, RPM SL S/W Comfort suede steering wheel with quick-release hub, Velo Apex-XL seat, Sparco harnesses, carbon blanking plates for centre console and gauge pod, Racepak displayStream item published successfully. Item will now be visible on your stream.
- Post is under moderationThe hottest E36 – the brilliant M3 R White Gold.
One of the rarest of all E36 M3s, and some might say the best, came from Australia: the brilliant M3 R. The very best E36 M3 didn’t come from Europe, or America… it came from a land Down Under. Words and photography: Chris Nicholls.
Mention special E36 M3 derivatives and most people’s minds will inevitably go to the M3 GT or Lightweight. After all, these sold in relatively large numbers and, thanks to being designed for BMW’s two largest markets (Europe and the US respectively), got the most media exposure. However, the rarest, most powerful E36 M3 ever made (GTR aside) didn’t come from either of those continents. It came from the relatively tiny market of Australia, where, in #1995 , a highly talented group of people from both within and outside the company came together to build 15 very special M3s. These came to be known as the M3 Rs.
Now, some of our regular readers may already know about the M3 R, especially as we featured another one back in (March 2006), but given the time gap, we thought it was best to look at it again because it is without a doubt one of the best factory M3s ever made.
The M3 R story first dates back to mid-1993, when BMW Australia investigated the possibility of building a near race-spec M3 for the road, the idea being that they could be sold to enthusiasts who tracked their cars on the weekend or even competed in state and national events. The payoff for BMW Australia being a homologation special that it could develop for Australian GT Production car racing.
Having been given the green light, the local BMW team worked closely with the legendary Paul Rosche, then M GmbH’s head of motorsport, and team members from the famous Australian Frank Gardner’s outfit, who ran the Australian M Team at the time, to help design, develop and spec the cars. It’s worth noting before we go any further that one of the Gardner staffers was Ralph Bellamy, whom older readers and F1 nuts may remember as chief engineer at Brabham, McLaren, Lotus (where he, along with Colin Chapman, Peter Wright and Martin Ogilvie invented ground effects), Lola and Fittipaldi, before moving onto BMW M to work on the international Super Tourer programme. So, as you can see, when we said a highly-talented group of people helped make this car, we weren’t lying.
As for the car BMW Australia ended up producing, it really was a road-going racer. The air conditioning and stereo were removed (although, as usual, owners could refit them) and sound deadening, central locking, foglights, rear seats and the on-board tool kit all went, too. Even with the standard twin fire extinguishers (although obviously not the optional bolt-in roll-cage) the end result was a car that weighed nearly 200kg less in its most hardcore form than a stock M3.
Of course, the modifications didn’t end there. The engine gained more aggressive camshafts, shorter intake trumpets and a different cold air intake that drew from where the driver’s side fog light used to be, as well as a Motorsport-designed sump and dual oil pick-ups to avoid the common S50 30B starvation issue. On top of that came a lighter flywheel (matched to either an AP Racing 7.25-inch sintered twin-plate racing clutch or a cerametallic twin-plate for road use) and new management software to yield an overall output of 325hp – more than any non-GTR E36 M ever sold elsewhere. It goes even harder than the weight and power would suggest, too, thanks to a shorter-than-standard 3.25:1 final drive ratio.
Unsurprisingly, the brakes also copped significant upgrades in the form of AP Racing four-piston callipers, two-piece vented rotors, Pagid RS 4-4 pads and front cooling ducts that ran from holes next to the now-deleted foglights. As for the suspension, almost every part was replaced with Group N Motorsport parts, right down to the hubs, which run different length studs (not bolts) front and rear to hold the unique 17-inch staggered BBS wheels. To ensure the looks matched the potential, the team also fitted the M3 GT body kit in its entirety, plus the Super Touring dual-level rear wing and a sliding front splitter. The whole lot was assembled at the BMW Australia Performance Driving Centre under the close supervision of M engineers and Ralph Bellamy himself. Three completed cars went to the local M Team for competition use and the remaining 12 were made available to the general public.
However, in keeping with the whole ‘race car for the road’ thing, only members of the general public armed with a CAMS (Confederation of Australian Motorsport) racing licence could buy one, unless they were willing to undertake the relevant training and tests before delivery.
As you can see, the M3 R is thus a rare and incredibly desirable special edition. One designed to maximise driving pleasure both on road and track, and in the sole colour available (Alpine white III), quite the stunner.
The owner of this particular example (number 14 of 15) is very well aware of just how special it is, too. Ian Burke has been a BMW enthusiast for many years, starting with an E46 323i in 2000, before moving up to an E46 330i three years later. These two impressed him enough that he bought an E92 335i sight unseen before they arrived in the country when the lease on his 330i expired, after which he upgraded to an E92 M3, which he still owns. Burke also has an original M Roadster, has done a factory tour and visited BMW Welt and would have bought an F80 M3, too, until a test-drive convinced him it was “a bit too boy racer-ish” for him. Thus, when he says it provides a special driving experience, you know he’s not wrong: “It’s a treat to drive. I would say on the open road it’s got better shock absorption and handling than my E92 M3. When you go over a bump the shocks absorb everything – they’re quite amazing. It handles extremely well, too. I’ve had it around Sandown Raceway a couple of times, and the performance is not like a modern-day car, although it’s still pretty quick, but the point is that it’s good around there because the braking is so superior to a modern saloon car. You can get the brakes red hot and really stamp on them into a corner and the whole suspension is race-tuned.”
How Burke came to own this car is a lovely piece of father-son serendipity as well. Burke isn’t really a tech guy – he has no social media accounts at all – but his son, Andrew, like most people his age, is on the web a lot. And unsurprisingly spends a large portion of that time looking at cars. Thus, a while after purchasing his M Roadster, Burke got an email from his son telling him about this example, which at the time resided in Sydney, complete with a link to the advert. “I looked at it and thought it looks pretty cool and that it could be a reasonable investment and a nice car to get around in so I went up to Sydney to see it,” he says.
The shop selling it was called Classic Throttle Shop, a renowned establishment which houses a huge number of special cars at any one time. Upon visiting, Burke senior was impressed enough by the car that he bought it on the spot and had it shipped back down to his home in Melbourne.
Not that the car was perfect, of course. The steering wheel leather had a small cut in it, which necessitated refurbishing, and many of the rubber seals were in such bad condition that they had to be replaced. This perishing and the fact the car had only done 17,000km at the time of purchase suggested that the car had previously spent a lot of time in a garage but as it ran fine and all the other components seemed alright Burke wasn’t bothered.
Once freshened-up, Burke made a couple of small changes to suit his personal taste and needs. First was swapping out the intake system for a lovely Gruppe M carbon number, purchased simply because he liked the noise. Second was the clutch. Apparently the original race-spec version was “virtually undriveable in the city”, so he changed it to a UUC model with a solid lightweight flywheel and an E34 M5 sprung disk.
Now, keen-eyed M3 nuts might also spot the car came with some non-standard modifications that Burke didn’t make, namely the Remus exhaust and an unknown brand thick alloy strut bar, as well as the original radio/cassette player and air-con, but all of these are minor changes and should he ever desire, Burke can always swap everything back to stock-spec pretty easily, especially as every component on the car has an official BMW part number.
Rather amusingly, there is one extra part Burke does own that he’d love the put on the car more regularly, but certain family members won’t allow it: a custom numberplate. “I’ve actually got a Victorian licence plate ‘E36 M3R’ but I’m not allowed to put it on because I’d look too much of a tosser,” he says. That said, Burke readily admits that “you’ve got to fly under the radar when you own a car like this”, so he isn’t too fussed – especially as he is allowed to bolt the private ’plate on when he attends the odd #BMW Car Club of Victoria meet.
“The BMW people know what it is without the ’plates,” Burke grins, “and, of course, when you lift the bonnet up, their eyes pop out of their head when they see the originality of the engine. It’s even got all the original stickers.”
Remarkably, given his penchant for regular spirited drives, Burke has only put about 4000km on it in the three year’s he’s owned it, but then he also has his M Roadster and E92 M3 on offer as toys, and his daily driver is a VF Holden ute (“it’s so damn convenient to throw all your rubbish in the back”), so perhaps the low number of kilometres travelled are less surprising in that regard.
As for the future, Burke says he plans to “just sit on it”, especially as S50 engines are so hard to come by these days, and eventually he’ll pass it onto his son. No doubt Burke junior will enjoy driving it as much as his old man.
“It’s a treat to drive. I would say on the open road it’s got better shock absorption and handling than my E92 M3”
TECHNICAL DATA #BMW-E36 / #BMW-M3-R / #BMW-M3-R-E36 / #BMW-M3-E36 / #BMW-S50 / #S50 / #S50B30 / #BMW-M3 / #Getrag / #BMW-3-Series-E36 / #BMW-3-Series-Coupe-E36 / #BMW-3-Series-Coupe / #BMW-M3-Coupe / #BMW-M3-Coupe-E36
ENGINE: 2990cc, DOHC S50 30B straight-six, cast iron block, 24-valve alloy head, 10.8:1 compression ratio, 264-degree inlet cam, 265-degree exhaust cam, oil restrictor in head, Motorsport sump, twin oil pick-ups, Motorsport air filter and intake pipe, Motorsport lightened flywheel (currently UUC solid lightened), Remus exhaust, updated engine management software
MAX POWER: 325hp @ 7200rpm
MAX TORQUE: 258lb ft @ 4400rpm
DRIVELINE: #Getrag-420G six-speed manual, #AP-Racing CP2961 7.25-inch twin-plate sintered (road/race) or #AP-Racing-CP4112 cerametallic twin-plate (road). Currently fitted with #UUC Stage 2 Ultimate clutch with E34 M5 sprung disk. Standard clutch master cylinder with travellimiting stop, E34 M5 driveshaft, 3.25:1 final drive ratio
SUSPENSION: Motorsport Group N Bilstein dampers, Motorsport Group N springs, Motorsport Group N upper and lower spring plates, Motorsport Group N struts (f), Motorsport Group N upper and lower wishbones (r), Motorsport Group N adjusting sleeves, Motorsport Group N damping sleeves, Motorsport Group N hubs with studs (f&r), aftermarket strut bar (f)
BRAKES: AP Racing four-piston front callipers with twopiece vented rotors (f&r), Pagid RS 4-4 pads (RS12 optional), front brake cooling ducts
WHEELS AND TYRES: 7.5x17-inch ET37 (f) and 8.5x17- inch ET41 (r) #BBS mesh wheels with 225/45 (f) and 245/40 (r) Bridgestone Potenza RE-11 tyres
INTERIOR: Anthracite M cloth/Amaretta suede trim, aircon delete, radio/cassette delete (both since re-installed), rear seat delete, central locking delete, sound deadening removed, twin fire extinguishers (driver’s side removed for convenience), spare wheel delete, jack and wheel brace delete, toolkit delete, boot floor mats and trim delete, limited edition plaque under handbrake
EXTERIOR: M3 GT body kit, Motorsport sliding front splitter, Motorsport Super Touring dual-level rear wing, foglight delete (driver’s side replaced with air intake vent)
“Their eyes pop out of their head when they see the originality of the engine. It’s even got all the original stickers”Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationNUMBER CRUNCHING 1040whp turbo E36 M3
We see a lot of modified cars here at PBMW but a 1000hp E36 M3 is something that never fails to impress… Words: Elizabeth de Latour. Photos: Andreas Wibstad.
They say that you shouldn’t chase numbers when building a car. You should build a car that will drive well and suit your needs rather than delivering big peak power but becoming undriveable in the process. Of course, if you happen to be building a car where big power is your need, then why not aim high and punch through the 1000hp barrier? It’s the sensible thing to do.
If we told you that Ole Ivar Seem, the owner of this E36, comes from Norway you probably wouldn’t be surprised because it would seem that Scandinavians have a predisposition for building stupidly powerful cars. And, unlike those of us having to find time during evenings and weekends to work on our cars due to our 9-5s taking up the vast majority of our time, Ole works on offshore oil platforms, which means he works hard but then has plenty of time to play hard when he’s back on dry land. And play hard he does.
Funnily enough Ole says that while he’d always liked BMWs he didn’t become properly interested in them until about 2003, when Vidar Strand from V.S Motor hit 1000hp with his E34 M5. That got his attention and got him thinking about the possibilities of what could be achieved with a BMW. And judging by one of his previous projects – a 426hp Sierra Cosworth, which was featured in our ex-sister title Performance Ford back in 2003 – it was clear that unless big power could be achieved Ole wasn’t interested. Of course, his first #BMW project was never going to make anywhere near that power output, being as it was an ’1986 E30 320i, but then again Ole only bought it for a bit of winter fun and threw a few mods at it. However, it started the sequence of events that mean we’re now standing here today with his 1000hp E36 M3.
With the Cosworth sold and a lump sum burning a hole in his pocket, Ole cast his car-catching net to see what he could snag. That’s when he came across this M3. “I found the car on a BMW forum here in Norway,” he explains. “It was a virtually completed street build with lots of good parts but that looked completely stock on the outside. Initially the plan was really to run with the parts that were on it but a thought crossed my mind about building a car for Gatebil Extreme [Gatebil’s own time attack and racing series]. After driving the car for a bit back in summer 2008, I got problems with water in the oil, leaking between the pyramid rings and water channels. So the real story of the car and engine you see today started when I picked up the phone to Vidar at V.S Motor.
“The motor building began with solving the problem of water in the oil. Vidar had a separate patent which, in principle, removes the head gasket and uses rings in a special metal. Vidar also fitted new custom cams from V.S Motor, new custom V.S Motor pistons, uprated Pauter con rods built to V.S Motor’s specifications, stainless steel valves, tighter valve springs and he did a general update of the whole engine. He then put it on the dyno bench at V.S to get it mapped properly. With it running perfectly we went for a power run and it made 772hp and 723lb ft of torque at 1.3bar, but tremendous back pressure on the exhaust side prevented any more power. The problem was an exhaust manifold that was not quite optimal and a Turbonetics turbo that was completely the wrong setup. I drove the rest of the summer and next spring running this setup but I was bothered by the fact that it did not deliver optimally when I knew I could get much more from the engine.
“After a few more conversations with Vidar we agreed that he should build a new manifold and a new turbo, then test it. The engine was ready in April 2011. This tested Vidar’s patience to the limit as it’s really cramped around the engine for building a manifold. You really need a lot of space. I think someone would have to pay him a lot of money to do this again!” laughs Ole. “On test day the engine really stood up to our demands, and on E85 fuel it delivered 1039hp and 817lb ft of torque at 2.1bar. You can say we were delighted with it.” And who wouldn’t be with over 1000hp on tap? But Ole and Vidar weren’t finished with the engine just yet. “In summer of last year we found out that we were going to start with new fuel as E85 was phased out from petrol stations in Norway, so we chose to use the Ignite E98 race ethanol fuel that Vidar sells.
We counted on a power increase so in July 2015, before going to the E30 meet in Rudskogen. I went with Vidar to Jonus Racing to run the car on the dyno. After roughly four to five hours of fine-tuning, the numbers that it put down really made our eyes pop! We got 1040whp and 855lb ft wheel torque which, when converted to power at the crank, becomes 1196hp and 959lb ft at 2.2bar. It goes without saying that were extremely pleased with this outcome,” smiles Ole.
We would be too. That’s an absolutely monstrous amount of power, especially considering he’s still running the 3.0-litre S50. That works out at 399hp per litre; that’s like the E39 M5, with its 4.9-litre V8, making all of its power from a 1.0-litre engine, which is a bit mental when you break it down like that. As far as engine spec is concerned, we simply haven’t got the space to go through all of it here, just take a look at the spec list and you’ll see it’s exactly as long as you would expect it to be on a powerful engine like this. Highlights include the Precision billet 7675 turbo – such a key part of this incredible build, adjustable cam pulleys, a Tial 60mm wastegate, 4.5” downpipe, 3.5” Edgeperformance exhaust, ARP bolts, a 26-row oil cooler, custom header tank, Griffin radiator, custom 6” thick intercooler, 580lph Aeromotive lift pump, twin A1000 fuel pumps, and a set of six absolutely ridiculous 1699cc flow matched fuel injectors. All of which is really just scratching the surface. It’s as heavy-duty a build as you can imagine.
You can’t just make a 1000hp engine, stuff it into an E36 M3 and hope for the best because things would go south in a big way almost immediately. You need to put in just as much work on the transmission and chassis fronts to make sure everything works in perfect harmony. There’s no messing about when it comes to the gearbox on this car, with Ole fitting a Sellholm MPG sequential ’box made specifically for this car and combined with a Tilton 7.25” threeplate, 26 spline rally clutch and Alcon hydraulic release bearing. A 3” chromoly propshaft rated to 1500hp delivers all that turbocharged power to a modified 210 diff from a 3.2 M3 sitting on reinforced mounts, and a pair of 38mm driveshafts.
As for the suspension, well, we’ll let Ole explain: “Everything under the car is solid mounted or uses aluminium uni ball components. I run custom road coilovers from Sellholm Tuning made specifically for the weight of the car and supporting chassis mods. These include: Sellholm Tuning front and rear fully adjustable blade anti-roll bars; custom front suspension turrets and custom adjustable top mounts; Turner Motorsport aluminium bushes and rear lower control arms; and PeeBee Motorsport adjustable rear upper control arms.
“When it came to choosing the parts, Vidar knew exactly what was required, having been involved in so many builds, not to mention his racing experience. I trust him 100% and he is the man to talk to when one is stuck with ideas or problems, although these phone calls can be expensive. That’s how I ended up with the sequential gearbox!” With over 1000hp on tap, you need some seriously big brakes to haul the E36 down from the sort of speed it can achieve, and Ole hasn’t cut any corners here. Up front, eight piston K-Sport calipers have been fitted, clamping 355mm discs, while at the rear sit six-pot calipers with 330mm discs and EBC’s BlueStuff track day pads have been fitted all-round. Wheel choice was guided by necessity rather than aesthetics, as you’d expect on a build like this. “The choice of rims came after lots of searching on forums and chatting with acquaintances in the racing world. To make most of the rubber on the ground, without extending the arches or anything like that, the wheels had to be lightweight, withstand a lot punishment and with widths matching the chassis. I chose the Apex EC-7 as there were really no other wheels that matched the car. They fitted well with the look that I had in mind for the car.”
The tough, lightweight wheels measure 9x18” up front and 9.5x18” at the rear and are mounted on the car via a set of NMS Racing 75mm studs.
Just by glancing at the outside of this E36 you’d really be hard pressed to tell what’s going on beneath the surface as Ole has kept everything looking extremely stock. “My goal has always been to retain the original lines that I like so much,” he says. “Generally original but sassy, a look with a little more muscle. There’s a fully removable carbon bonnet, a carbon sunroof blank and the only change to the body itself is that the rear wheel arches have been rolled.”
Of course, the interior is another matter entirely and there was only ever going to be one direction to take it in. “The choice was easy,” says Ole. “It should be for racing! It had to be as light as possible and, ideally, with parts that no one else in Norway or Europe had tried before. Plenty of time went into building the roll-cage, which was done by a colleague and myself with Vidar providing all the technical information. It is made from about 80 metres of chromoly 4130 tubes and has been built down towards the chassis to really get it rigid, to the suspension turrets, to the diff and many other reinforcements against the chassis, which you can’t see in the pictures. In reality it is a tubular frame inside the car.”
Beyond that there’s a QSP steering wheel mounted on a Sparco Group N quick-release steering boss, Cobra Suzuka seats with six-point harnesses and a Racepak UDX data logger dash with auxiliary Autometer gauges. To keep things as light as possible, the car has been fitted with ACM carbon fibre doorcards and even a carbon firewall, carbon dash and carbon centre console while the boot is home to fuel system, with a 60-litre Aeromotive aluminium fuel cell and aluminium swirl pot.
After a hell of a lot of planning and almost seven years of work, it’s unsurprising that the end result was so damn spectacular.
What is surprising, though, is that Ole sold the car not long ago but, he says, it’s gone to a man who really knows what he’s doing so it’s in good hands and will be used as intended by its new owner.
So, what’s next for Ole? Time to give up the modifying game and relax with pipe and slippers watching gardening programmes? In a word, no. “I already have plans going around in my brain but one thing is for sure, it gets wilder!” he exclaims. “This car will probably take a few years to finish. And I have a problem: I’m never satisfied until I have spent a lot of time on everything from planning to execution, so those who wait will see. The rest is a huge secret,” he adds with a grin. We’re instantly as excited as he is. Judging by his track record, it’s going to be something special.
Interior is slathered in sexy carbon panels.
Apex EC-7 wheels were chosen as they’re light and tough; massive eight-pot K-Sport calipers sit up front with six-pots at the rear.
That’s what you need for 1000hp. S50B30 has been fully built and features massive Precision 7675 turbo.
“My goal has always been to retain the original lines I like so much”
TECHNICAL DATA FILE Turbo #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #S50B30 / #S50 / #BMW-S50 / #V.S-Motor / #BMW-3-Series-Coupe-E36 / #BMW-3-Series-E36 / #BMW-3-Series-Coupe / #BMW-3-Series / #Precision / #Precision-7675-turbo / #Autronic / #Sellholm / #Aeromotive / #BMW-M3-V.S-Motor / #BMW-M3-V.S-Motor-E36 / #Pauter-Motorsport /
ENGINE 3.0-litre straight-six #S50B30, #Autronic-SM4 , MSD coil packs, #Autronic boost solenoid, V.S Motor custom exhaust manifold, #Precision-billet-7675-turbo , Edgeperformance Vanos block-off kit, adjustable cam pulleys, Tial 60mm wastegate, V.S Motor 4.5” downpipe, Edgeperformance 3.5” stainless steel exhaust, #Tial 50mm BOV, #ARP bolts throughout, Pauter Motorsport H-rods, V.S Motor spec valve springs, V.S Motor spec custom cams, JE custom pistons built to V.S Motor spec, original intake manifold modified for forced induction, Samco intake hose, head and block modified to remove head gasket, special head gasket replacement rings designed by V.S Motor, Turner Motorsport oil cooler hoses, Earl’s 26-row oil cooler, #GS-Performance oil distribution block, #Griffin aluminium radiator, AN-20 fittings, custom header tank, custom three-litre oil catch tank with AN-16 fittings, 2x12” Flex-a-Lite fans, V.S Motor design Precision bespoke 6” thick intercooler, Aeromotive fuel pressure regulator, 19-row Ethanol cooler with 10” fan, Edgeperformance fuel rail, 6x flow matched 1699cc E85 injectors, VEMS wide band lambda sensor and EGT
POWER AND TORQUE 1040whp and 855lb ft wheel torque at 2.2bar
TRANSMISSION #Sellholm-MPG sequential gearbox, #Tilton 7.25” three-plate 26-spline rally clutch, #Alcon hydraulic release bearing, 1500hp 3” chromoly custom propshaft, M3 3.2 210 diff modified by V.S Motor, 38mm drive shafts, reinforced diff mounts and suspension attached to roll-cage, Omega gearbox/diff oil
CHASSIS 9x18” (front) and 9.5x18” (rear) #Apex-EC-7 wheels with 255/35 (front) and 265/35 (rear) #Nankang Sportnex NS-2R tyres mounted on 75mm #NMS-Racing studs, custom Sellholm asphalt coilovers, #Sellholm adjustable suspension turrets, custom top mounts, Sellholm fully adjustable blade anti-roll bars (front and rear), Turner Motorsport aluminium trailing arm bushes, aluminium front control arm bushes, #PeeBee-Motorsport adjustable upper rear control arms, #Turner-Motorsport adjustable lower rear control arms, aluminium diff bushes, K-Sport eight-piston calipers with 355x32mm discs (front), #K-Sport six-piston calipers with 330x32mm discs (rear), #EBC BlueStuff pads (front and rear)
EXTERIOR Removable ACM carbon race bonnet, carbon sunroof blank, rear arches rolled
INTERIOR Full chromoly 4130 roll-cage connected to suspension turrets, diff and throughout the chassis, QSP steering wheel with #Sparco Group N quick-release steering wheel boss, OBP pedalbox, Sellholm hydraulic handbrake, Cobra Suzuka seats with six-point 3” harnesses, Racepak UDX dash data logger, Autometer Sport-Comp gauges for oil pressure, oil temperature, boost pressure, fuel level and water temperature, OMP 4.24-litre central fire extinguisher, ACM carbon doorcards, carbon fibre firewall, complete carbon dash and carbon DTM centre console, Fibervac carbon panels, 580lph Aeromotive SS series lift pump, 2x Aeromotive A1000 fuel pumps, Aeromotive fuel filter/holder, Aeromotive 60-litre aluminium fuel cell, aluminium swirl pot, Earl’s fittings and hoses
THANKS An extremely big thanks to Vidar Strand at V.S Motor, without him this car would not have been possible, he has always been cheerful and helpful no matter what time I’ve called. Thanks also to Robin, Kay Ove, Stig P, Kurt Magnar, Kjell Inge, Jørgen, Terje, and Thomas at EdgeperformanceStream item published successfully. Item will now be visible on your stream.
- Post is under moderationMODERN CLASSIC
The E36 M3 is fast becoming something of a modern classic and this bagged ’vert is as clean as they come. Alex Barnett’s E36 M3 proves that with simple, well-executed modifications and a clean base you can make your BMW a real modern classic… Words: Ben Koflach. Photos: Matt Dear.
What makes something classic? It’s an almost unanswerable question. While BMW’s own parts computer now designates the E36 as a classic model, is that a label that can truly be assigned to it? Looking over Alex Barnett’s E36 M3, though, you’d be hard-pushed to deny it of its status as something of a modern classic. So many E36s are left in a poor state of fettle, demonised for the track, or have been modified just that bit too far that the original ’90s feel they left the factory with has been lost. The E36 M3 was a special car and fortunately 24-year-old Alex’s retains its original nature yet with his own twist on it. Here’s a car that’s more about what hasn’t been done than what has. It has ‘cool classic’ written all over it.
“I’ve owned the M3 for around 18 months now,” explains Alex. “I had a 323i Coupé before which I was planning to turbo or S54 swap, but when I thought about what I wanted from a car in the long run, I thought an M3 might be a better bet. I looked at eBay and saw this M3 for sale at a good price in Colchester. I messaged the seller, Ross, and headed down there the same weekend to view it. I fell in love with it as soon as I saw it.”
One of Alex’s many talents is paint correction and detailing. He could see the potential in the M3 even though it wasn’t looking its best when he picked it up. “The car was in reasonable condition,” he says. “The paintwork was okay but really flat and the rear arches were starting to rot – which the E36 is known for. Other than being on some FK coilovers, it was standard. Once I’d bought it I got straight to work on getting the paintwork up to my standards.”
In the end every panel apart from the doors and boot was repainted before Alex was completely happy with it but, as you can see, it was worth it. Alex’s trusted bodyshop Chappell Coachworks (near Brands Hatch race circuit) has done a sublime job. “The plan was always to stance it; if it had been an M3 Coupé I’d most likely would have turned it into a track car but, being a convertible, I thought the right path would be to stance it… which I received a lot of hate for!” laughed Alex.
“I put my Borbet A wheels on the car, wound the coilovers right down and started attending shows,” he smiles. However, there was always a plan in the back of Alex’s mind. He didn’t want to ruin the E36’s undercarriage by running low and static. He knew air was the best way to go. “With it being an M, I think keeping it OEM+ is an investment so that one day I can turn it back to standard and sell it – not that I plan to do that just yet! After about a year of driving it static, Joey Hazell pointed me in the direction of Jamie Hitchcock, who was selling an E36 air-ride combo.”
The air-ride combo system is simple but functional and ticks all the boxes as far as Alex is concerned. It’s a two-way manual setup with the pump and tank stowed in the boot. The struts, meanwhile, are #GAZ units with matching front bags and Air Lift rears. Of course, a wheel upgrade was what was needed to make the most of the newfound lows, and Alex chose an all-time classic – the #BBS RF, which he found in Germany and had shipped over. “The wheels I got in June 2014 from Germany as I couldn’t find a set I wanted in the UK,” Alex tells us. “They’re 8.5x17” and 10x17” with 2.5” and 3” dishes, which I stripped down before Players Classic this year for a freshen-up.”
This reworking included the centres being powdercoated in the white you see before you, and the dishes were given a thorough polish, too. Finally, Alex consulted split-rim guru Dan Taylor at Wheel Unique for a complete set of gold spike hardware, black and red BBS badges and metal hex centre caps to replace the original plastic items.
“Once I got the centres back I got straight on with building them back up in time for the all-important Players event,” Alex says. “The tyres were refitted and tested for leaks. They held pressure, which I was pretty stoked with, as it was my first time building split-rims and with all the horror stories I’d heard I was really worried in case I hadn’t done the job correctly.”
E36 geeks will also spot that there are a few additions to the exterior aside from those wheels but it’s been very much Alex’s plan all along to keep it as BMW intended but with his own touch. Therefore the foglights have been blanked and the orange indicators have gone in favour of subtly smoked versions. The rears lights Alex carefully painted red and, aside from a gentle arch roll, everything else is original and as perfect as can be.
“My favourite part of the car, I would have to say, is the air-ride system as I can have mad lows when parked up and still drive the car at normal height and keep the underside in good condition,” reveals Alex. “I still love the noise of the air releasing out of the solenoids and confusing people in traffic by making the car go up and down quickly.
“I plan to keep the car looking pretty similar to how it is now in future but eventually doing a nut and bolt rebuild, making it nice and clean underneath and inside. The shell is rot-free which is great for a 20-year-old car, so first up will be small changes like new bushes and a good lick of Waxoyl to extend its life. As the M3 is now becoming a classic it’s really in my best interests.”
Alex certainly considers the E36 M3 to be a classic, and with the way he’s treated his, it has every right to be titled as such. His masterful modifications have made it a car that draws attention for all the right reasons, even E36 purists will find plenty of details to enjoy, and yet the whole thing has been brought bang up-to-date with his own twists. This is a true modern classic.
M3 Coupé Vader seats replace the standard items. Below: manual air-ride setup uses a single air tank.
Far left: Milltek exhaust looks and sounds great.
Left: Front fogs have been blanked. #BBS RFs look fantastic on the E36. Below: Adjustable front top mounts.
DATA FILE #Air-ride #BMW-E36 / #BMW-M3 / #BMW-M3-Cabrio / #BMW-M3-E36 / #BMW-M3-Convertible / #BMW-M3-Convertible-E36 / #BMW-E36-Convertible / #BMW / #BMW-3-Series / #BMW-3-Series-Cabrio / #BMW-3-Series-E36 / #BMW-3-Series-Cabrio-E36 / #BMW-3-Series-M3-Cabrio-E36 / #BMW-3-Series-M3-Cabrio
ENGINE AND TRANSMISSION 3.0-litre straight-six #S50B30 / #BMW-S50 / #S50 , #Milltek decat centre section and backbox, five-speed manual gearbox, #AC-Schnitzer short-shift
CHASSIS 8.5x17” (front) and 10x17” (rear) #BBS-RF three-piece wheels (with white centres, red/gold caps, gold spike hardware and metal hex centres) with 205/40 (front) and 215/40 (rear) Nankang NS2 tyres, two-way manual air-ride using #GAZ-Gold shocks, #Gaz front airbags, #Air-Lift rear bags, adjustable front top mounts, #Powerflex trailing arm polybushes
EXTERIOR Avus blue paint, smoked front and side indicators, all-red rear lights, foglights blanked
INTERIOR Factory black leather interior with M3 Coupé Vader front seats
THANKS My girlfriend Jess for helping me throughout the show season with the car and putting up with me working on the car near on every evening, Dan Taylor at Wheel Unique for fulfilling all my wheel needs, Gary Chappell for doing all the bodywork and always squeezing it in, Auto Finesse for all of the products I use to get the car to the standard I like
I love confusing people by making the car go up and down quickly.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationSWEDE SPEED
With 1137hp, this turbo E30 is an absolute beast. After years of building cars renowned for being safe and steady, Sweden’s best modifiers have now gained a well-earned reputation for being fast and furious. Forget the Volvo, handy in the snow and with the shopping. With 1137bhp this E30 323i is a lot more fun, and is contributing to global warming a treat, we love it. Words: Louise Woodhams /// Photos: Anders Odeholm
POWER: Approximately 1137bhp (at the flywheel) @ 6850rpm
TORQUE: Approximately 880lb ft @ 5950rpm
TOP SPEED: 208mph
BEST QUARTER MILE: 9.78 seconds @ 153mph
KERB WEIGHT: 1340kg (including driver)
I do freelance work for various publications in Scandinavia and I have shot a few BMWs you might want to take a peek at,” read the email from a snapper based in Sweden. Admittedly I was feeling a little apprehensive - quite often a photographer's idea of a feature ear can be a little off the mark. To his credit, though, he found us the beautiful wide-body 2002 Turbo from February 2004 so there was a glimmer of hope. There’s also the fact Scandinavia is synonymous with designing and building cars with enough performance to make the finest of supercars feel slow and pointless, including the world’s fastest production car in the world, the Bugatti Veyron. So chances were it was going to be pretty wild.
When the post arrived a few days later I ripped open the envelope and sure enough one of them was an M3-bodied 323i packing a European-spec E36 M3 engine with a huge Schwitzer S400 turbo strapped to it. The end result? Approximately 1137bhp at 6850rpm (at the flywheel) and 880lb ft of torque at 5950rpm! This, ladies and gentleman is the planet's most powerful street-legal BMW, and probably one the most remarkable things a Swede has done with a car to date. The penny drops when I hear the man responsible, Daniel Liimatainen from Goteborg, runs a business that specialises in restoring and tuning cars called Linuuet Speedfactory (www.Hnimet.se), and prior to tills worked as a Peugeot mechanic.
The 27-year-olds love for the E30 blossomed in 1999 after he test-drove, and then subsequently bought, a lightly tuned 320i. Hooked on the combination of the glorious in-line six, relative low kerb weight and nimble rear wheel handling, it was apparently a lot more fun than his Audi 80. A few years later he then upgraded to this current 1984 BMW 323i E30. Having always been interested in modifying (his previous project was a yellow checker taxi - a party mobile apparently!) it was inevitable the car wouldn't slay stock for long. “A buddy of mine had a tricked-out Audi S2 and he literally blew the doors off my BMW. It made me realise that a hot cam and air filter were far from cool and a dead end. I knew forced induction was the only way to go - I wanted revenge,” he explained. First off though was an engine swap. Having parted with 8000 kroner (that’s just over £600 to you and me) for an S50B30 engine and transmission he then got to work; at this point in time however, the company wasn’t established, so amazingly the swap was carried out with the most basic of tools in a garage that stunk of manure, as it was next to a field of cows!
Daniel’s initial plan was to make 800bhp, but as is often the case, things got a little out a hand and having already bored out the engine to 3030cc he then compiled a monster shopping list of high quality, uprated internals, including a set of custom 8.0:1 JE oil cooled pistons, slightly longer than standard Carillo con-rods and 1600cc injectors to name a few. The cylinder head was, of course, ported and polished, the combustion chambers modified and then sealed with pyramid’ rings. The car's claimed 1137bhp output is primarily attributed to the modified and lightened Schwitzer S400 turbo, with two Tial 38mm external wastegates to regulate the massive boost and make the custom exhaust route more viable. To cool the giant a modified Volvo truck double cell intercooler with a 3” intake and 3.5” outlet and Volvo 940 radiator were bolted in place. The engine work took Daniel and the lads from Christer Next Level Racing six months to carry out. There were a few problems to get over, though, as he explained: ‘The exhaust manifold was a real bitch to fit, there wasn't a whole lot of space so we had to modify the floor pan. We also had a big setback with the Haltech E11 engine management system - it took a week to find the fault to stop it misfiring - and problems with the camshaft sensor, which took another week to solve. It nearly drove me crazy but the performance is better than I ever expected.” In fact, his exact words were, “it’s like being kicked hard in the arse”, later recalling a time he left a Yamaha R1 in his dust! Much to his bemusement, his friends stopped asking for passenger rides a while ago.
As well as using the car for track days and drag racing, it’s also driven on the road, Daniel having covered almost 12,500 miles in it. For the car to behave itself the power had to be harnessed. To prevent shredding the gears on power launches he employed an E36 M3 six-speed manual ’box with a 3.07 ratio mated to an E28 535i limited-slip. A more durable Tilton triple-plated clutch weighing a total of just 12 pounds helps to increase grip, whilst a custom NUKE Performance aluminium driveshaft is stronger and more reliable.
There’s no sense in making a car go if you can’t make it stop, so Daniel decided to factor in TarOx 355x28mm discs and 10-piston calipers up front and 284x22mm discs with 6-piston calipers out back. It’s all well and good being rapid in a straight line, but if you can’t sling it into corners it’s no better than an American muscle car. Other chassis upgrades include Bilstein shocks and custom IGMAB springs with E30 M3 struts and spindles and Powerflex urethane bushings to add further security within the suspension components. According to Daniel it’s like any other grocery-getter, well balanced and a pleasure to drive.
One glance over the interior tells you all you need to know about this car’s intentions. To improve the power-to-weight ratio, the rear bench, carpet, headlining and air-con were binned and while the original dashboard and door panels survived the cull, the original seats have been replaced by a pair of Sparco Pro2000 buckets with four-point Sabelt harnesses and a steel roll-cage welded in place. As well as the carbon dash display there is also a bank of Autometer metric gauges, including the speedo, rev counter, boost pressure, oil and coolant temperature and oil pressure, not to mention switches on the gear shift including launch control. The boot floor is now lined in diamond plating with a custom 30-litre fuel cell and battery.
As expected there are also a few external modifications to give the game away, the E30 M3 arches are the most obvious additions and have been extended a further 40mm to help accommodate the wider and taller than standard 8x18” (front) and 10x18” (rear) white Compomotive wheels shod in 215/35 and 265/35 Kumho tyres respectively.
Combined with the Rieger E46 M3-style bumper up front, vented bonnet and air inlet residing in the chasm where the left headlight was – the body styling not only looks the part but also serves a purpose, enhancing aerodynamics. Just for that added flair, Daniel had the car resprayed black with a satin clear coat, which in some lights looks like a matt finish. Certainly an improvement over the original metallic blue.
This car is simply as good, and as powerful, as it gets. Okay, so no one will insure you with your five years' no-claims, the fuel bill will be similar to a small plane and the plod would assign a new division just to keep stopping you around town, but who cares? It is a work of art and the very pinnacle of motor engineering - the owner should be incredibly proud of himself. Question is, where can he go from here? Despite working on it for over five years and spending over 30 grand he says the car will probably never be finished and is already talking of a bigger turbo to make it even quicker, so it seems things can only move forward. Keep your eyes peeled!
DATA FILE #BMW-E30 / #BMW / #BMW-E30-S50 / #Schwitzer-S400 / #Schwitzer / #BMW-3-Series-E30 / #BMW-3-Series / #NUKE-Perfomance /
ENGINE: 2997cc straight-six #S50B30 / #BMW-S50 / #S50 engine from the European-spec E36 M3 bored to 3030cc with NUKE-Perfomance dry sump and Barnes 6-stage pump, custom-made 10mm main bearing girdle, Peteterson 18-litre oil tank, 8.0:1 custom JE oil cooled pistons, Total Seal gapless rings, Carlllo custom con-rods with SPS MULTIPHASE bolts, #Kilander-Racing head studs (M11,12.9), head ported and polished by Christer NLR, modified combustion chambers, ‘pyramid’ rings to seal combustion, #K&N air filter, Schwitzer-S400 turbo modified and lightened by Christer NLR, 78mm compressor housing and 74.5mm exhaust housing, custom 4” downpipe, Ummet twin exit stainless steel 3.5” exhaust system with two Tial 38mm wastegates corrected for even distribution, 31.5mm stainless steel exhaust valves, Simons full flow mufflers with twin 2.5” tailpipes, 19 Row Setrab engine oil cooler, modified stock manifold, 1600cc injectors, Weldon fuel pump (5 bar) and pressure regulator, two 10" #Perma-Cool cooling fans, 1994 Volvo 940 radiator, modified Volvo truck double cell Intercooler (130cm wide, 20cm high, 18cm deep) with 3” intake and 3.5” outlet Haltech E11 engine management system, six MSD singletower coils, 4-channel AEM cdi Ignition, Taylor 10mm HT leads, Teknik Products engine mounts
TRANSMISSION European-spec E36 M3 six-speed manual ’box with 3.07 gear ratio, Tilton triple-disc clutch, E34 M5 drive joints with custom NUKE Performance 80x5mm air-craft quality aluminum driveshaft, M20 flywheel. E28 535 limited-slip
CHASSIS 8x18" (front) and 10x18" (rear) white Compomotive wheels (ET15) shod in 215/35 and 265/35 #Kumho tyres respectively. #Bilstein front and rear shocks, custom IGMAB front and rear springs, E30 M3 struts and spindles, #Powerflex M3 urethane bushings with eccentric offset, custom-made 40x2mm strut brace. Dual circuit brake system with Tarox 355x28mm discs with aluminum centre and 10-piston calipers (front) and 284x22mm discs with 6-piston calipers, copper and braided steal brake lines
EXTERIOR E30 M3 front and rear arches (extended a further 40mm), doors, rear bumper and spoiler, custom Rieger E46 M3-style front bumper, vented bonnet, left headlight removed and replaced with air inlet, E36 M3 mirrors, Hella rear lights, full respray in black with satin dear coat
INTERIOR #Sparco-Pro2000 bucket seats with four-point Sabelt race harnesses, rear bench, carpet and headlining removed, Memo steering wheel, IGMAB gear shift and pedals, GunnarsjG Svets and Smide AB seamless steel 45x3mm roll-cage, carbon dash display, Autometer Sportcomp metric gauges, including speedo, rev counter, boost pressure, oil and coolant temperature and oil pressure, NLR AMS-1000 boost controller, switches on gear shift including launch control, line lock, 3 AMS ON (activates boost controller), and AMS CLUTCH (activates clutch switch to boost controller), 5" Tacho white shift light, M3 rear view mirror, aluminium diamond plating in boot with custom-made 30-litre fuel cell and battery
TANKS Peter at Pelemaskinteknik, Peter at GIK Turbo, Svensk Turboservice Anders at PRO, NUKE Performance, Forza, Mocomp, IGMAB, PRO motorsport and all the others that helped make my car what it is today
With more controls than the Houston control centre (maybe) and stripped of all its luxuries this 323i is not your average E30.
Huge #Schwitzer S400 turbo supplies the boost, whilst the rest of the power comes from the E36 M3 lump and uprated internals. No rubber or jubilee clips here – all motorsport-spec fittings and hoses.
M3 body styling, white Compomotive wheels and compressor housing sticking out of the bonnet, it doesn't gel any sexier than this.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationTRUE INDIVIDUAL
The E36 M3 GT Imola Individual is a rare beast and modified examples, like this slick machine, are rarer still. The E36 is fast becoming the appreciating #BMW classic of the moment, and you’ll struggle to find one finer than Mikey Townsend’s M3 GT Imola Individual. Words: Ben Koflach. Photos: Scott Paterson.
Things at the upper end of the E36 market have seen a sea of change in the last few years. After some time spent as perhaps the least desirable models of the 3 Series range, they’re now on the up in terms of resale values – for a good one at least. And the most desirable of all the models? The ultra-rare M3 Evolution Imola Individual.
With just 50 examples produced for the UK (and only a further 200 for the entirety of mainland Europe), the M3 GT II, often labelled the GT2, was a final hurrah for the E36. It built on the legend that had been forged with the M3 GT. However, rather than being based on the 3.0-litre M3 and being coloured British Racing green, the GT II used the 3.2-litre six-speed M3 Evo as a base and came in stunning Imola red.
M3 GT Class II front corner splitters and a rear wing to match, an interior combination of Imola red Nappa leather and anthracite Alcantara and plenty of the usual options boxes ticked as standard made the GT II special. Mikey Townsend was lucky enough to pick this one up at the beginning of last year and proceeded to put his own stamp on the ultra-rare M3.
Mikey’s far from a stranger to BMWs. As an ex-paratrooper stationed in Germany for a number of years he was lucky enough to have an E30 M3 as his first one, bought for just DM6500 – less than £3000. “If only I knew what I had back then!” laughed the 32-year-old. “I’d have put it away in storage instead of driving it like a loon everywhere.” Sure enough, by the age of 18 Mikey was an ex-E30 M3 owner, having written it off, but he was hooked on BMWs from then on. An E46 M3 followed later, with an E36 M3 Coupé and a Convertible spliced with countless non-M Three and Five series models – you name it, Mikey’s probably had one. However, his latest purchase is the most special of them all.
“My brother has an M3 GT II, number 16, which he got in 2007, and I’ve wanted one ever since he got it,” Mikey told us. “It was inevitable that I would end up with one, it was just a matter of when. Then this one popped up and was only half-an-hour from me, so I had to take a look.”
What Mikey had before him was M3 GT Imola Individual, number 48 of 50. It was an immaculate, carefully restored piece of Bavarian history which had been given a select range of modifications to boot including KW V3 coilovers and a number of small touches. Along with those it came with all of the original parts so that it could be restored to its rare original guise if required.
“I’ve been choosy as to what I do with it,” Mikey explained. “That’s why I’ve only really gone for Schnitzer styling and the best replacement parts available. Everything I’ve done is totally reversible as I’ve got all of the original parts in the garage. Everyone says: ‘you can’t modify it, it’s too rare!’ Well, tell me it doesn’t look good!”
When he bought the car it was sitting on three-piece Hartge wheels. These were not purchased as part of the deal and so the first thing Mikey did was get the standard wheels refurbished to a better-than-new condition before bolting them up to the car and rolling it home. Once the wheels were on and shod in brand-new Michelins, Mikey got the car home and didn’t hang about with his plans to get it looking the way he wanted.
“The body had already been recently resprayed and fully rust treated and Waxoyl’d underneath, so everything I got for it had to be mint. This meant new or completely refurbished parts throughout,” Mikey explained. His private plate was purchased and transferred onto the M3, while a Storm Motorwerks weighted gear knob was fitted alongside the previous owner’s addition of Amaretta Anthracite Alcantara gaiters.
Another upgrade for the interior was a selection of genuine BMW Motorsport International door sill trims and a matching carbon fibre glovebox trim. The badge on the back of the rear wing was also swapped for one that Mikey had made by Taylor Made Decals, denoting the car’s 48/50 production number.
Mikey’s next trip out in the car was to go and get a special little something for under the bonnet, as he explains: “I took her for a blast over to Luton to see Bilal and Imran at Evolve. I had been speaking to Bilal for a while about an Eventuri intake for the E36 but he said that there hadn’t been enough interest in them to warrant producing them.
However, he said to bring the car down for them to have a look at anyway. No sooner had I got there and spoken to Bilal was the car in the workshop, with the old air box being stripped off and measurements being taken for a custom kit. Dyno runs were done before and after, both with standard mapping. It was hitting 306/307hp as standard but with the Eventuri it was hitting at least 315hp on each run with much stronger and consistent torque gains!
Gaining an extra 10hp from the kit was really surprising and the sound it makes is awesome, especially on wide open throttle.”
A neat touch is that Eventuris all feature a serial number, and Mikey managed to bag number 48 to match his car. It a little plaque on the carbon heat sheild and is just one example of the painstaking detail he goes to in his pursuit of perfection.
Mikey’s next addition to the car was, again, to the engine bay in the form of a genuine AC Schnitzer carbon fibre strut brace. However, the carbon’s clear coat had aged badly and gone slightly yellow in places. Of course, that wasn’t good enough for Mikey’s GT II and so it was sent off to be carefully re-lacquered, with the engine cover being colour-coded at the same time – a neat touch.
With the M3 looking and feeling better than ever, all that was left was for Mikey to put a couple more of his own touches on the exterior. This started with a set of anthracite M3 Contour wheels – mint, of course – and some AC Schnitzer Cup 2 wing mirrors.
However, the biggest change was yet to come, as Mickey explains: “I stumbled across the current wheels by chance really. I was looking for something else but got chatting to this guy with an Estoril blue E36 M3 Evo. He sent me a few photos of it and said that he had these rims on it but wanted to go back to the originals. These wheels are my favourite. I’ve always loved them and have always said that if I could have any wheels on the E36 it would be them. He was after cash quick so I got them for £1000 with new tyres, too,” Mikey told us. “It was a case of being in the right place at the right time – literally three weeks before Gaydon BMW Festival last year, so it was all good!”
With the AC Schnitzer theme that Mikey already had running throughout his GT, those final touches were the perfect additions. However, the only worry he now had was that it was all becoming a little too ACS-themed and might detract from just how special the GT is; not the worst problem to have, you might be think, but it was easily solved by simply swapping back to the original M3 mirrors, which has worked a treat.
The final addition was an AC Schnitzer exhaust – another rare part, which makes the S50 a little more vocal and brings a welcome lift to the rear end. It was bolted up with Hack Engineering billet exhaust hangers, too. No stone has been left unturned with this M3.
“Because of the size a few people were saying that the wheels would never fit – but that’s the beauty of having the KW V3s: I could get it stanced perfectly! With a few goes it was spot-on, with no rubbing,” concluded Mikey. With a thorough polish up and some fresh AC Schnitzer graphics for them, the wheels were the perfect addition to set the car off.
Undoubtedly Mikey has more plans for the GT but you can rest assured that each and every addition will be as carefully considered as all of those so far. E36s are on the up, and with something as rare and as special as his GT Imola Individual it would be too easy to damage it with the wrong modifications. Premium parts, great taste and a respect for the rarity have culminated in one very special M3.
DATA FILE #BMW-E36 / #BMW-M3-GT-Imola-Individual / #BMW-M3-GT-Imola-Individual-E36 / #BMW-M3-E36 / #BMW-M3-GT / #BMW-M3-GT-E36 / #BMW / #AC-Schnitzer / #AC-Schnitzer-Type-1 / #BMW-Motorsport / #BMW-M /
ENGINE AND TRANSMISSION 3.2-litre straight-six #S50B32 / #BMW-S50 / #S50 / , #Eventuri carbon fibre intake with build number matched to chassis number, #ARP con-rod bolts, colour-coded engine cover, AC Schnitzer exhaust, #Hack-Engineering billet exhaust mounts. Standard six-speed manual gearbox, #Rogue-Engineering gearbox mounts, braided clutch line, standard 3.23 final drive LSD
CHASSIS 8.5x17” (front) and 10x17” (rear) #AC-Schnitzer-Type-1-Racing three-piece wheels with 215/40 (front) and 245/35 (rear) Hankook V12 tyres, #KW-V3 coilovers, #AC-Schnitzer carbon fibre strut brace. Standard brakes with drilled and grooved discs front and rear, braided brake lines
EXTERIOR Full respray in original Individual Imola red, Class II front spoiler removed, factory Class II rear spoiler, BMW Motorsport Individual side moulding badges, custom build number plaque
INTERIOR Individual upholstery (including Imola red door inserts and seat centre sections, Amaretta Anthracite seat bolsters), Amaretta Anthracite-trimmed steering wheel with Imola stitching by Royal Steering wheels, extended Imola leather by Bespoke Leather, Storm Motorwerks gear knob, Storm Motorwerks cigarette lighter blank, AC Schnitzer alloy pedal set, AC Schnitzer door pins, BMW Motorsport International carbon fibre glovebox trim, BMW-Motorsport International door sill trims, Harman Kardon speakers
THANKS Bilal and Imran at Eventuri, Jim at Vines, Steven at Taylor Made Decals, Ben at Hack Engineering, friends and familyStream item published successfully. Item will now be visible on your stream.
- Post is under moderationACCEPTABLE IN THE EIGHTIES
This super-clean, white, S50-swapped, two-door E30 is a perfect slice of modified ’80s motoring.
William Green’s E30 harks back to a time when such cars had to be tuned a certain way, and rock a certain look. But he’s given it a modern twist, and a whole lot more horsepower… Words: Daniel Bevis. Photos: C3Photography.
The 1980s have a lot to answer for. Shoulder pads, Filofaxes, music with synths, Fox-body Mustangs, Grease 2 – there was a lot going on, and much of it was made of brightly coloured plastic. However, the decade wasn’t without its charms; it brought us Cheers, Appetite for Destruction, perestroika, and the charmingly infuriating Rubik’s Cube. And while the TV shows of the era seemed to represent a society eager to eulogise about the easy-going nostalgia of the 1960s – Happy Days, The Wonder Years and so on – the man on the street was firmly on the cutting edge of up-to-the-minute 1980s fantasticality, the sleeves rolled up on his pastel-hued suit, a pair of Wayfarers atop his slicked-back hair, and the keys to an icewhite E30 in his hand.
Oh yes – in the 1980s, the secondgeneration 3 Series was very much where it was at. From South London to South Central LA, there was one aesthetic that anyone who was anyone aspired to: a white E30, preferably a 325i, low-slung over big wheels, with an M-Tech II spoiler proudly adorning the bootlid. That was the real deal. Sure, Magnum P.I. had his Ferrari 308, Miami Vice was all about the Testarossas, and Michael Knight had his sentient Trans Am, but this was the real world. Real people dreamed of Beemers.
The lusted-after look of the era is pretty much as you see here, in the form of William Green’s retro-styled throwback. The exterior is so ’80s it hurts, white-on-white-on-white, with merely a whisper of clearance between those crisp glacier-like arches and the broad, chunky five-spokes beneath. All of the requisite M-Tech II accoutrements are in place. If you can ignore the crowds of excitable teenagers Instagramming the thing with their iPhones and tune out the chemtrails from all the wi-fi signals, you could almost be glimpsing into an authentic late-1980s scenescape.
Ah, but there’s a twist. All’s not as periodcorrect as you might think here – when you peel back the skin and scratch around among the pulpy flesh below, you’ll discover that William’s got one or two restomod tricks up his sleeve…
“I’ve always been a car modifier,” he says, enigmatically. “It all started with my first car, a 1986 VW Golf GTI with a supercharged G60 Corrado engine swap; BMWs came second to VWs at the time, as I then went on to own a ’92 GTI and a ’95 GTI.”
‘Yes,’ I can hear you shouting into the magazine, ‘but when do we get to the E30?!’ Alright, chill out – we’re coming to it. But before we reap the rewards of patience, we need to sow the seeds of an entirely different 3 Series.
“I came across my first E30 when I was in college,” William reminisces, an orchestral James Horner soundtrack swelling in the background. “It was a gunmetal grey 1988 325ix – two-door, five-speed – that was completely refurbished, it looked like a brand-new car. Being a broke college student, I begged my mother to get me that car; she did, and it was the best gift I ever received! I brought it back to college in the Catskill Mountains of NY and the ix really lived up to its name – the all-wheel drive system was flawless.” A handful of wellchosen modifications followed – a custom exhaust, chip tune, intake and coilovers – but nothing too extreme. This wasn’t like that first, manic, engine-swapped project, this was a super-tidy base so he was taking baby steps. The quality of the car spoke for itself really, as three years later a chap drove two thousand miles to make William an offer he couldn’t refuse. And with that chapter behind him, it’s safe to say that he’s firmly made the ideological leap from Wolfsburg to Bavaria. A 2006 530i followed, and then a 2002 M3, but it wasn’t too long before our protagonist began once again hankering for the old-skool. His retro yearning was twofold; firstly after the nostalgia of the 1980s that so many of us of a particular age are unable to escape from, but secondly due to the absolute perfection of his first E30. It was time for history to repeat itself.
Okay, people may say ‘never go back,’ but that’s a load of old toffee. ‘Once bitten, forever smitten’ – that’s more of an appropriate mantra here (ignoring the fact that it comes from an old Vauxhall advert, obviously), and William was more than ready to dive back into the rose-scented waters of E30 ownership.
“I found this ’80s baby in a high-end luxury car dealer just south of Los Angeles,” he explains, effortlessly reeling off a phrase that you could imagine on a T-shirt in H&M. “The car was being sold on consignment, and belonged to the son of the owner’s best friend. It was an unfinished project, and the exterior was probably an 8/10 – and that’s what sealed the deal on buying the car! I knew that everything still left to do was stuff I could take care of myself.”
The car was already fitted with an S50 motor – y’know, like you’d find in an E36 M3 – but it was, shall we say, well used, having chalked up over 140,000 miles. William’s initial plan was to swap it out for an S54, although having weighed up the costs and taken an objective view, he decided to persevere with the S50 and give it a refresh and rebuild. After all, they’re robust old lumps. Hell, 140k is barely run in, right?
“It needed a rebuild pretty much straight away,” he reasons. “The compression was off on two cylinders, so I went ahead and had the head rebuilt and that took care of the engine problems. I also went with the M50 manifold and the S52 exhaust manifold, custom pulleys, injectors, high-flow MAF, and 3.25 LSD. There were a lot of modifications made along the way but these were the initial mods to get the car the way I wanted it.”
The fact that the previous owner had made inroads into the project helped out a lot, as it was already wearing a fresh, periodperfect, ice-white 1980s paint job when William took delivery. He was able to augment this with the oh-so-cool M-Tech II goodies to create that retro style, and it has created what William describes as ‘a neck-breaker’.
“This car has always been a conversation starter at pretty much every car meet or gas station I go to. People love the body kit and the Magnum 17s. Most people go with BBS rims so I decided to stick with a wheel that’s different and displays all the inner workings. I recently started doing autocross too, and this build is perfect for the courses.”
You can imagine how that newergeneration M3 motor helps out when it comes to sporting endeavours, but this car is far from a laser-focused track build; indeed, the interior is something quite special. Up front are a pair of E36 M3 Vaders in black leather, with an E30 M3 bench out back trimmed to match. The E30 M3 gauge cluster was painstakingly rebuilt by an Instagram user by the handle @e30_dad, while the vacuum-of-space effect of all the blackness (the seats, the carpet, the headlining, it’s everywhere) is neatly complemented by a cunning custom audio install that, among much else, features a pair of 8” subs hidden inside the rear panels.
William, like so many feature car owners we talk to, has an obsessive and completist eye for the details, manifested here in the fresh lights, the commitment to the Stormtrooper black/white colour-coding, the OEM+ interior embellishments of disparate provenance, and the cherry picked chassis parts that comprise E36 M3 suspension and brakes, some M Coupé bits and bobs, and a super-tight Z3 steering rack.
In fact, it’s fair to say that this is more than just a car to him. “This car has also inspired me to start my own small business, www.e30head.com,” says William. “I designed an E30 centre console cupholder that was once an old BMW idea that I brought back to life. The enthusiasts love it! And yes, the S54 swap is still a plan that will get executed – I put that build on hold last time because we were having our first child and those funds needed to go to more important purchases, but the timing will be right one day.” And in the meantime, he gets to enjoy a nice thick slice of aspirational nostalgia, rolling the kind of ride that everybody looked up to back in the good ol’ days. Acceptable in the Eighties? Ah, it was more than acceptable. It was rad, def, way cool, totally tubular. And it still is.
The exterior was probably an 8/10 and that’s what sealed the deal on buying the car!
DATA FILE S50-swapped #BMW-E30 / #BMW-E30-S50 / #BMW
ENGINE AND TRANSMISSION 3.0-litre straight-six #S50B30US / #S50B30 / #S50 / #BMW-S50 / , custom 3” #Magnaflow exhaust system with high-flow cat and resonator, TMS underdrive pulleys, custom underdrive crank pulley, TMS Jim Conforti remap, new water pump, thermostat, alternator, intake, oil pump, gaskets, TPS, radiator and hoses, E30 M3 wiring harness cover, OBDII E36 exhaust manifolds, E30 Motor Werks skid plate, E36 M3 five-speed gearbox, E30 M3 propshaft, E36 M3 guibo, 3.25 LSD with M Coupé cover, M Coupe halfshafts
CHASSIS 8.5x17” (front and rear) #MVR-Magnum wheels with 215/40 (front and rear) Falken 512 tyres, TC Kline S/A coilovers, #Vorshlag front camber plates, #K-Mac rear adjustable camber/toe bushings, E36 M3 front suspension and brakes, E36 M3 five-lug rear conversion including brakes, #Zimmerman drilled discs all-round, ’96 Z3 2.7 lock-to-lock steering rack, E32 750il brake master cylinder, custom brake booster
EXTERIOR Full respray, #M-Tech II bumpers, side skirts, lip and spoiler, replica #M-Tech II front valance, 6000K Xenon headlights and foglights, new tail-lights, smoked front indicators, black kidney grilles, colour-coded door handles, headlight wipers
INTERIOR E30 M3 gauge cluster, E36 M3 gear knob, E32 leather handbrake handle and gaiter, E36 M3 Vader seats, E30 M3 rear seats, black door panels, M-Tech II steering wheel, black carpet, black headlining, #Alpine CD head unit, 2x custom hidden #MTX-Thunder6000 8” subs in rear panels, Rockford Fosgate 250 two-channel amp and 600 four-channel amp, Kicker speakers
THANKS I’d like to give special thanks to my wife, Ashleigh, who inspired me to start E30Head. To Raphael with Ore Photography Group – without his excellent shots of my car, I don’t think we’d be doing this interview. Diego, the E30 Cluster Master @e30_dad, my biggest supporter from the start. Scott with Renown USA for being one of the first to support my E30 centre console cupholder design
S50-swap is so neat it looks like it could have been a factory job and it gives this E30 some serious go.
This car has always been a conversation starter at pretty much every car meet or gas station I go to.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationNOTHING IS IMPOSSIBLE 720hp turbo #BMW-E36 hardcore British built M3. We revisit an insane turbo E36, now pushing 720hp. Ignoring conventional routes, Steve Will has created a turbocharged E36 M3 that performs like no other… Words: Stav Neophytou. Photos: Andy Starkey.
While turbocharging in-line six #BMW engines has been the norm in Europe and the USA for decades, until recent years it’s been a rarity in the UK due to our cars being righthand drive. BMW sixes are canted towards the exhaust side, which also happens to be the driver’s side on right-hand drive cars. This means a severe lack of room for not only the turbo and manifold but getting a suitably large exhaust downpipe past the steering column is a real nightmare, too. However, despite these fitment headaches, turbocharging is finally taking off in the UK BMW scene.
A man clearly ahead of the times, though, is UK resident Steve Will. This incredible E36 M3 is his, and it’s been turbocharged for the best part of a decade now! While it’s been a long road, full of pitfalls and learning experiences, the end result is jaw-dropping.
Steve bought this car back in 2005 and turbocharging it was always on his mind since driving a turbocharged 635CSi many years previous. Despite the perceived impossibility of a RHD Turbo E36 M3 back then, it was barely two years later before it had its first incarnation as a turbocharged engine. This first setup used a cast log manifold by South African BMW expert Savspeed, a Turbonetics T70 turbo, and a fully-forged engine with a compression ratio of 9.5:1. Unfortunately, while clearly incredibly powerful, the combination of the high compression ratio, pump fuel and suspect mapping meant the engine expired due to severe detonation while still being tested and mapped at Bruntingthorpe Proving Ground.
Thankfully this initial disaster was covered under the tuner’s warranty, so the engine was rebuilt with a more pump-fuel friendly 8.5:1 compression ratio.
Sophisticated Motec engine management was fitted and the car was finally dyno’d at a ballistic 670hp and 500lb ft of torque. While we really don’t need to tell you how incredibly fast a 670hp E36 is, due to the big turbo and basic log manifold it wasn’t the most efficient setup in the world. In fact, even Steve will be the first to tell you it was actually very laggy. While it hit the 350hp mark at 5500rpm the power then literally jumped up 100hp every 500rpm from then onwards, pulling hard until over 7500rpm. It was an absolute animal; insanely fast but far from controllable!
The engine stayed in the above spec for a number of years but as the car was primarily used as a drift car, both for fun and competition, outright power became less important than response and drivability. So, when the engine finally failed in 2011, plans were made for a more user-friendly engine spec. While the cast log manifold was still seen as the only option, Steve increased the compression ratio to 9:1 and fitted a smaller PT5862 turbo – Precision’s equivalent of the popular Garrett GT35R.
After some expert mapping from Greg at Protuner the way the car drove was transformed, with 350hp now coming at just 3500rpm. At the same rpm the engine was also making well over 500lb ft of tyredestroying torque. Peak torque was incredible, 650lb ft, and response was instant, too. Compared to the original larger turbo, however, peak power was down over 100hp at 560hp, and peak rpm was much lower, too, with the graph flat-lining from 5000rpm until just over 6000 when it started to drop.
There’s no doubt 560hp and 650lb ft are supercar-smashing numbers in most people’s eyes, and if Steve knew no differently he’d no doubt be over the moon with the performance but despite the amazing torque and response, his previous experience of having a huge 670hp and a screaming high rpm performance was impossible to forget. In fact, he was so used to the insanity of the old setup he called this one “boring”, which leads us to where we are today…
What Steve ideally wanted was the best of both engines: the insane power of the big turbo engine but with the torque and response of the small turbo engine. Pretty much everyone he spoke to said that was impossible. Undeterred Steve employed the services of someone who sees the word ‘impossible’ as a challenge: Thomas Zurawski of Zurawski Motorsport in Ledbury, Herefordshire.
While the engine itself was bulletproof, and it’s hard to beat a #Motec-M800 ECU, Zurawski Motorsport is an expert in custom turbo setups and could see the existing design left a lot to be desired. Not only was the cast log turbo manifold considered a poor design but the inlet plenum, intercooler, exhaust system, and air filter setup were all on the list for improvement. Tubular twin scroll turbo manifolds didn’t previously exist for RHD BMWs due to the lack of room but the Zurawski design fits perfectly. And not only does it flow far better than a restrictive log manifold but the twin-scroll design drastically improves turbo spool up, allowing a bigger turbo to be used without losing drivability.
To further aid spool and throttle response, twin WRC anti-lag valves have been fitted, allowing huge amounts of airflow to go direct from the compressor to the exhaust manifold which, along with fuel and ignition adjustments from the Motec ECU, give the engine the ability to stay at full boost even when the throttle is closed, not to mention the rapid-fire bangs and huge flames from the side exit exhaust!
The other big change to the engine is certainly the most controversial: the inlet plenum. The shape and design of it is certainly a world away from typical designs and, due to this, many naysayers claimed it would be restrictive or simply not work. The reality is, however, it’s actually a commonly-used design in turbocharged race engines, as found in WRC, RallyCross, and LeMans. The unusual design gives equal airflow to each cylinder, something that’s a big problem on turbocharged cars, especially on in-line six engines, and by allowing the cylinders to receive equal amounts of airflow improvements are seen in power, spool up, reliability, and to safe boost limits.
In addition to the manifolds, the entire turbo system – from air filter to exhaust tailpipes – was custom-made from scratch by Zurawski Motorsport for maximum flow and efficiency. It includes a huge grillemounted air filter, an enormous intercooler that necessitated the rear mounted radiator conversion, twin external wastegates, and a full custom exhaust system, with a very cleverly designed downpipe that somehow manages to snake past the dreaded RHD steering column!
Of course, the most important part of any turbo system is the turbocharger itself, which is a BorgWarner S300SX 9180 turbo, with a twin scroll T4 turbine and billet compressor. This turbo is actually bigger than the previous original laggy unit, so surely this new engine can’t be very responsive? Think again…
With the car once again in the expert hands of Greg at ProTuner, the new setup made a touch over 600hp at just 1bar boost, and 700hp at 1.5bar, 30hp more than the traditional-style turbo setup using the log manifold. While the power is impressive, what really makes it special is this time he also had an insane 730lb ft of torque, with over 500lb ft of that by just 3700rpm. Yes, it spools as fast and makes even more torque than the small turbo did but makes more power than the big laggy turbo! The currentspec engine actually makes more power and torque than the original engine right across the rev range, from 2500rpm until over 7000rpm. In fact, at 4000rpm it now has 375hp and 490lb ft more!
Buoyed on by these incredible results, the car recently returned to the dyno with 109 Octane race fuel where it made 720hp and over 800lbft at 1.4bar boost. The new fuel gave such incredible response and torque that, by the time of writing at least, Steve’s been unable to get traction at any higher boost than that. Once he finds a traction solution, though, he’s hoping for 800hp plus. Considering the current results, even over 1000hp looks to be easily achievable with only a slight increase in turbo size.
While we make no apologies for concentrating so much on Steve’s groundbreaking engine, the rest of the car is no less wild, both in looks (thanks to the M3 GTR wide bodywork and Team Dynamics motorsport wheels) and in performance (thanks to a spec that is truly world class).
On the inside there’s a comprehensive custom roll-cage that ties in to the diff mounts, a sophisticated rear mounted radiator setup that draws air through the side window ducts and exits via the rear diffuser, while underneath there’s a drift- specific front suspension design with incredible amounts of steering angle.
What’s perhaps most impressive is the thought put in to all the various parts fitted to this car. While you will no doubt have read the comprehensive spec list and recognised most of the parts’ manufacturer names, Steve has built this car more like a Works race car than a typical privatelyowned car, with the reliability and strength of all components being the primary consideration. This doesn’t just mean strong and effective parts but even things like the fuel and oil pressures are continuously logged by the ECU, which shuts down the engine if something deviates from the specified parameters.
So now the car is complete, what does Steve want to do with it? Well, despite being used for competition drifting for some time now, he’s more interested in just having fun in it without the stresses of trying to win trophies. On the rare occasions this car isn’t on masses of opposite lock, Steve’s actually very keen to take it back to where the original turbo engine expired, Bruntingthorpe Proving Ground, this time to break the 200mph mark – something it should do with ease.
For a car built with nothing but Steve’s own enjoyment in mind, the progress of this build over the years, and especially the final result, is a lesson for all of us. Not only is this sort of unbelievable, best-of-all-worlds, engine performance perfectly possible (and reliable if done correctly) but putting true thought in to what you are doing, taking influence from world-class race cars rather than simply following the crowd, really pays off in the long run.
The rest of the car is no less wild, both in looks and performance.
DATA FILE Turbo #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #Motec / #BorgWarner /
ENGINE 3.2-litre straight-six #S50B32 / #S50 / #BMW-S50 , standard crank, #Pauter steel rods, 9:1 JE forged pistons, Cometic multi-layer head gasket, ARP head and rod bolts, standard head and cams with #Vanos enabled, #Motec-M600-ECU with an E888 expander, #Zurawski-Motorsport twin scroll tubular manifold, twin Turbosmart external wastegates, #BorgWarner-S300SX-9180 twin scroll T4 turbo with uprated billet wheel, full turbo-back Zurawski Motorsport exhaust system with side skirt exit tailpipe, twin WRC-style anti-lag valves, heat wrapped turbine housing and downpipe, #Zurawski-Motorsport equal flow inlet plenum, custom boost pipes and front mount intercooler, Zurawski Motorsport grille mounted air filter, high flow fuel lines, high flow alloy fuel filter, twin #Bosch-044 fuel pumps, 25ltr ProAlloy fuel cell, uprated fuel pressure regulator, Titanium oil catch tank, switchable ECU maps for Shell V-Power and Sunoco race fuel, switchable anti-lag and launch control systems, #Mocal oil cooler, uprated engine mounts, custom rear mounted radiator system, additional electric water pump, full fire extinguisher system, interior and exterior emergency cut-off switches, Petronas 10W60 oil. 720hp and 800lb ft
TRANSMISSION #ZF five-speed gearbox, #Helix twin-plate paddle clutch, custom lightweight steel flywheel, M3 Evo rear diff with shimmed LSD plates for 70% lock, E46 M3 crownwheel and pinion, uprated gearbox mounts, #ATF Racing gearbox, diff mounts integrated into roll-cage
CHASSIS 9x17” (front) and 10x18” (rear) #Team-Dynamics 1.2 wheels with 225/45 (front) and 265/35 (rear) Pirelli PZero tyres, BC coilovers, IRP drift front suspension setup, lightweight alloy adjustable lower arms, rosejointed lower arm bushes, custom adjustable top mounts, Mocal power steering cooler, polybushes, standard M3 brakes, hydraulic handbrake, Wilwood incar brake bias adjuster
EXTERIOR #BMW-M3-GTR front bumper, front wings and rear spoiler, E46 M3 GTR-style vented bonnet, custom rear arches, custom alloy rear diffuser, roof vent, rear window ducts, #Plastics4Performance lightweight windows
INTERIOR Full custom FIA-approved multi-point cage, Motordrive bucket seats, TRS harnesses, OMP steering wheel, Stack AFR, EGT and oil pressure gauges, Autometer boost gauge, carbon doorcards, custom ducting and shrouding for the rear mounted radiator
THANKS A-Frame Engineering (www.aframeengineering.co.uk), County Alarms (www.countyalarms.co.uk), ProTuner (www.protuner.co.uk), Zurawski Motorsport (www.zurawskimotorsport.com)
Steve wanted the power of his big turbo engine but with the torque and response of his small turbo engine.
Everything about this extreme E36 M3 means business. Side-exit exhausts look and sound awesome. Custom alloy rear diffuser allows hot air to be pulled away from the boot-mounted radiator, itself fed by pipes attached to side window intakes.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationMASTERCHEF
Simple on the outside, exciting on the inside, this sexy Aegean blue E30 has been treated to a 3.2 S50-swap.
SLICK S50 E30
Awesome 3.2-litre two-door. With some seriously tasty mods and an S50 under its carbon bonnet, owner Nicholas Arnold has rustled up one cooking E30. Words: Elizabeth de Latour. Photos: Matt Woods.
Could the E30 be the most engine-swapped #BMW of all time? Judging by the number of feature cars we run that have been fitted with something other than their standard engine, it’s got to be up there. While V8s are a great and popular choice, sometimes you’re just not in the mood and fancy something more traditional where the 3 Series is concerned, like a howling, high-output straight-six, and that’s exactly what we’ve got here.
Chef Nicholas Arnold is its custodian and the man behind the swap. He’s no stranger to modified cars and BMWs, having worked his way up from a Vauxhall Nova 1.2 through to a selection of Hondas, including an EG Civic that he performed a full DC2 conversion on, and on to a number of BMWs, starting with an E34 525i (as it was cheap and RWD), and including a previous E30, which met an untimely end… “I wrote it off on black ice and I just felt I had to own another one. I found this car on eBay, located in Scotland – it was in good condition and had just had a respray,” says Nicholas. There was also the small matter of it already being endowed with an M52 under the bonnet. “It had a straight-through exhaust, was on cheap Jom coilovers and had an open diff. I changed the inlet manifold and ECU before making bigger plans,” he says – those plans being the swapping in of a more potent powerplant.
“I put a S50B32 in it as the M52 wasn’t fast enough,” explains Nicholas. “I bought new AKG engine mounts, custom wiring loom, aluminium triple core radiator, Ramair air filter, got a custom-built manifold, ACL race bearings, ARP con rod bolts, M3 3.0-litre oil pump with an E34 baffle sump and a Simons race silencer with a full stainless steel system. It took me six months to put together all the parts for the build and a week’s-worth of work to put it all together. The only problems I had was the servo had to be moved across by 45mm and I had to have a brake linkage bar made up.”
They say that the waiting is the hardest part and we have no doubt that was definitely the case here as six months to go from capable M52 to 321hp of ferocious #S50B32 goodness must have felt like an age. Let’s not beat about the bush here – the E36 M3 Evo is not a slow car, so just having that rev-hungry lump in the lightweight surroundings of an E30 would result in an absolute rocket ship. But that’s not all, the transmission has also been beefed-up to suit and there’s a five-speed Getrag ’box mated to an E34 M5 Sachs clutch with a 4.5kg billet steel flywheel, E36 propshaft and an E36 2.8 LSD in an E30 medium diff case.
With some serious power on tap, Nicholas turned his attention to the chassis as it needed some upgrades to be able to cope with the massive increase in engine. “I went for a set of BC Racing coilovers as they’re mid-range and suitable for road and track, Purple Series polybushes with E30 M3 lollipop bushes, again suitable for both roadand track-use, fitted all-new drop links, H&R uprated anti-roll bars, Ultra Racing strut braces to stiffen the chassis and I also had the subframes powdercoated and the rear subframe reinforced due to the increase in power.” The car no doubt drives spectacularly and sits beautifully low. It just looks right, especially on its black 16” Rota Grid Vs, which tie in perfectly with the numerous black details across the bodywork, and make a change from the usual suspects when it comes to E30 wheel choice, as Nicholas explains: “I have the Rota Grid Vs as I like to be different. I also like the Jap, aggressive look rather than following the crowd and having Borbets or #BBS reps.” The wheels are wrapped in Toyo Proxes tyres and sit on a stud conversion, while Ferodo DS2500 pads and EBC discs sit behind the spokes.
In terms of looks, the E30 really doesn’t need much help – subtle is often best to enhance the styling and that’s definitely been the approach here. The Aegean blue paintwork looks stunning, rich and deep, and the unpainted carbon bonnet is no less gorgeous. Other exterior additions include an eyebrow, crosshair headlights and all-red tinted rear lights. The interior, on the other hand, has received a bit more attention, as Nicholas tells us. “The car started off with a plain standard non-Sport interior but I’ve always had Sport seats in my previous E30s and knew how comfy they were so wanted another set in this car.”
He spent months searching for a pair of Sport seats but, having drawn a blank, he changed tactic and bought a pair of OMP buckets instead. Of course, no sooner had he installed them in the E30 than a pair of chequered Sport seats appeared at a good price, so he snapped them up and got rid of the buckets. And, as luck would have it, a few weeks later a rear bench, complete with headrests, and in the same pattern, popped up so Nicholas jumped on it, so to speak, and in a very short space of time had put together a rather lovely Sport interior.
In addition to that he’s fitted a suederimmed #OMP steering wheel with snap-off boss, AC #Schnitzer short-shift gear knob plus a rear blind-equipped parcel shelf. It’s smart, clean, period and suits the rest of the car, with a few subtle hints to suggest that there’s more going on here than meets the eye. We are well and truly in love with Nicholas’ E30, he’s really built himself an amazing machine. From the outside it looks so right – the colour is stunning, the carbon bonnet is spectacular and it really delivers the perfect blend of subtlety and aggression, with no single element feeling over the top or out of place, and that too can be said about the engine. It sits in the bay perfectly, looking so at home, and it’s turned this E30 into an absolute weapon.
“The huge engine is my favourite mod on the E30,” smiles Nicholas, “because the car is very inconspicuous looking.” He’s going to keep it looking that way, too, when he carries on with the mods this year: “I plan to add some fatter tyres and beef up the brakes as I’m only currently running 2.5 brakes allaround with DS2500 pads and EBC discs which fade after a couple of minutes of hard driving, and supercharge it,” he says, which is really going to turn the heat up on this E30 and take it to the next level.
Gorgeous Aegean blue on the outside, sexy Sport seats on the inside.
The S50 fits perfectly in the E30 engine bay and took owner Nicholas a week of work to get it fitted and running.
The engine is my favourite modification on the E30 because the car is inconspicuous looking Nicholas Arnold.
DATA FILE #BMW-E30-S50 / #BMW-E30 / #BMW / #Rota-Grid
ENGINE AND TRANSMISSION 3.2-litre straight-six #S50B32 / #S50 / #BMW-S50 from E36 M3 Evo, #ACL race bearings, #ARP con rod bolts, #Ramair filter, Millers Nano Drive oil, custom manifold and steering linkage, Simons race silencer and full stainless system with single dolphin tip, custom plug and play wiring loom, #AKG engine mounts, M3 3.0-litre oil pump, E34 sump, sump baffle.
TRANSMISSION Five-speed #Getrag gearbox, #Racing-Dynamics short shift kit, E34 M5 Sachs clutch with 4.5kg billet steel flywheel, E36 prop, E36 2.8 LSD in E30 medium diff case.
CHASSIS 8x16” (front and rear) black #Rota-Grid-V wheels with 195/40 (front and rear) Toyo Proxes T1-R tyres, stud conversion, fully polybushed except Z3 diff bush, #H&R anti-roll bars, #BC-Racing coilovers, #Ultra-Racing strut braces, M3 eccentric lollipop bushes, reinforced rear subframe, E30 91mm brakes and hubs, #Ferodo-DS2500 pads, #EBC discs.
EXTERIOR Respray in Aegean blue, Lite Tuned carbon fibre bonnet, crosshair headlights, eyebrows, red tinted rear lights.
INTERIOR Chequered Sport cloth interior, OMP steering wheel with snap off boss, #AC-Schnitzer short-shift gear knob, rear blind parcel shelf.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationPURPLE HEARTS
Built to commemorate its owner’s late father, this Daytona E36 Cab is a poignant purple project. Kevin Love’s dear departed father used to rock a boisterous purple muscle car. So what better way to celebrate his memory than with a fresh new build in the same vein? Words: Daniel Bevis. Photos: Kevin Love.
From 1969 to 1973, American muscle car enthusiasts were treated to a stimulating palette of glistening new colours in the Dodge, Chrysler and Plymouth model ranges. These new HIP shades (standing for High Impact Paint) came to aggressively assault the retinas of passers-by with a lurid and shocking take on the generally considered conventions of the car hue genre.
And the best thing about all of this corporate playfulness was the names that were chosen for these paints: Top Banana, Go Mango, Sub-Lime, Panther Pink, Citron-Yella, and of course Plum Crazy. These were extrovert cars, they deserved extrovert colours.
“My father had a 1968 Dodge Charger in Plum Crazy,” recalls Kevin Love, as he casts a fond eye over his own purple toy. “It was his Purple Haze, and when he passed away I wanted to create my own personal tribute to him, my own Purple Haze.” And that’s just what you see here – a #1995 E36 M3 in Daytona Violet. Sure, its origins lie on the other side of the Atlantic to his father’s old car, but the ethos of the project is the same: a beautiful, aggressive, eye-catching machine with far more horsepower than necessary and race track DNA clearly on display.
“Following the success of my M3 convertible, I was ready to hit the ground running with another unique build,” Kevin continues. “That was my first BMW project and it was ten years in the making, culminating in a feature in DRIVE-MY in August 2014.” He’d set the bar high then, having already appeared in these hallowed pages. So, how might one ensure that lightning strikes twice? Presumably by getting things off on the right foot and starting with a solid, decent project base, yes?
“Er, no!” he laughs. “When I bought this car it was in rough shape. I had two choices at that point – either I make it a track rat and just gut it, or turn it into another beauty queen. I did a little research and found the M-Cross interior, and that was the moment I knew which direction I wanted to go with the build. I am an OEM fanatic and I strive to find the rare parts to make the car that little bit more noteworthy.” He’s not kidding – seasoned DRIVE-MY readers may recall how Kevin transformed his convertible 318i auto into an M3-powered show-stopper with an Anthrazit Rain interior and all manner of rare original-equipment bits. If it’s obscure and Bavarian, Kevin will find it.
“I’d created the Colorado BMW Groupë on Facebook, and a fellow member had listed this car for sale,” he recalls. “I liked the car but I wasn’t in the position to pull the trigger at that time. A few months later it was listed once again; the more I thought about it, the more I wanted it. The colour is what truly sold me – we arranged to meet up, and when I saw the colour in person I was convinced. And I didn’t waste any time in tearing into the thing either… pretty much as soon as I got it home I went through the car on all the maintenance, refreshing all the suspension components, and I detailed it inside and out. Then I started replacing weather-stripping and seals; I knew exactly what I needed to do right away to make this car have a great starting point to build from.”
The thing with talking to Kevin about his #BMW love affair is that it’s like flicking the switch on a Duracell bunny, you just set him going and he’s off for hours, absorbed in his own passion. It’s endearing – this is a guy who just can’t restrain himself from spending countless hours online, on the phone, in lock-ups and breaker’s yards, and on social media hunting down rare parts, garnering and giving advice, just living the BMW dream. It swims in his blood. Passion that his beloved Charger-toting father, Rodney, would surely be hugely proud of.
“I wanted to challenge myself, I never wanted to look back and be known from my previous build and fall short,” Kevin asserts. “Most of all, this car is my own build and not built for others’ approval. I consider myself an OEM fanatic, but I also appreciate the stance movement, and at the end of the day this is just my perfect M3.
“The first big modification was the Air Lift V2 suspension,” he continues. “I wanted reliability, and not to have to plan my route around town in advance.” Wise sentiment indeed, and something we hear time and time again from owners who’ve made the switch to air-ride – there will always be people hating on the format, but it really can be an all-things-to-all-men solution.
Kevin’s next big decision, having got those arches markedly closer to the ground, was to figure out what to fill them with. “I got in contact with a vendor in Germany selling Carline CM6 wheels – easily my favourite wheel style that I always dreamed of owning,” he enthuses. “With that life goal ticked off, and the wheels’ hardware swapped for 24-carat gold items for good measure, I then fitted my very rare and obscure Dove Alcantara M-Cross interior. In fact, throughout the build I sourced every Motorsport item I could, ending with the strut brace.”
It’s been, as we’ve come to expect from Kevin, an exhaustive exercise in partshunting, touching on such desirable treats as the red Motorsport seat belts, the door handles and, most noticeably from outside, that outrageous GT2 Class II boot spoiler. “I wanted to keep the car as clean and classy as I could make it,” he assures us. “I wanted everything to be as OEM as possible. That Class II spoiler is my favourite and most noticeable exterior modification, and I’ve added lots of little touches to make it my own – for example the headlight retrofit and M-colour pinstriping. I don’t want them to be immediately obvious, more that they’ll be picked up on by people who know what they’re looking for. This is how I feel BMW should have released the M3 from factory!”
Of course, a healthy outlook toward increased thrust is key to a build such as this, not least because we’re talking about an M3, but also in the interest of authentically continuing the Love family line of Purple Haze tuning. Under the bonnet you’ll find the #S50B30 US, based on the M50 with that engine’s less complex head design and twostage Vanos, and lower compression than its European counterpart plus a normal throttle body rather than ITBs, making 240hp.
However, improvements can be made to get the engine feeling a little healthier. The brawny six now enjoys an M50 manifold with an AFE intake, and Kevin’s a sucker for a Rogue Engineering exhaust – possibly, we speculate, because the back box looks a bit suggestive when viewed from behind – so you’ll find one of those under there too. It’s all been electronically tickled by RK-Tunes, with the package finished off neatly by a 3.38 LSD at the rear. Show and go in one brightly coloured and slightly frightening package – much like a ’68 Charger, really. A little more technologically advanced, perhaps, but certainly on the same page.
It’s easy to be blasé about a car such as this, and maybe assume that it’s a chequebook build, particularly coming hot on the heels of another equally detailed project, but it’s important to bear in mind the sheer effort that Kevin’s put into this. His BMW obsession is an all-consuming force in his life; the engine work, for example, was all carried at by Kevin in his garage, along with his buddy Brandon, and he wears the results as a deserved badge of honour. And his focus on the aesthetics is well on par with his mechanical nous.
His description of the interior work is modest, but implies so many hours of work: “The interior was in real bad shape to begin with – typical 20-year-old wear and tear. Dove seats just never look clean, and it had the usual saggy headliner and wilting doorcards. I stripped the whole interior down in order to swap over to Grau Alcantara M-Cross cloth. I also added in the Euro three-spoke wheel wrapped in new Alcantara, along with the shift and e-brake boots matched with M-stitching. It’s finished off nicely with Motorsport door seals, seat belts and OEM carbon-fibre trim pieces.” That he makes it sound like all in a day’s work tells you more about his modesty than anything else.
“I have found parts for this car from all over the world,” he continues. “Luckily the interior was purchased from a seller in California, so shipping wasn’t as dramatic. The wheels came from Germany as well as a lot of the Motorsport items; I started with a clear idea of what I wanted to do with the build, and the only thing that really slowed me down was sourcing all the parts I wanted on the car. I made lots of contacts though, and was fortunate enough to have smooth transactions. And there are so many things I love about my car now – the body lines just work so well together, and I focused a lot on the interior as that’s where I spend most of the time. It has a calming, yet sporty feel. The reliability of the air-ride really makes a big difference too; I can go for my stance for daily driving, then turn the car into a weekend track warrior, beefing up the suspension with a push of a button!”
Kevin has much to be proud of here. The fruits of his labours shout loudly about a man who knows whereof he speaks. There’s an inherent conflict of approach in that, on the one hand, he’s eager for it to have all of the correct parts and look just-so, and on the other hand that he doesn’t do shows and would rather just be out driving the thing… but it’s safe to say that he’s balancing the whims of the two demons effectively. While he describes his kinship with the car as being ‘a love-hate relationship’, he’s fooling no-one. This car is all about love. It’s baked right into it, a Love family tradition. And you can be sure that Kevin’s old man would be proud to see his Purple Haze legacy living on in such fine, muscular style.
Carline CM6 wheels look stunning; DJ Auto headlights with projector retrofit are one of the many smart, subtle additions on this car.
“I can go for my stance for daily driving, then turn the car into a weekend track warrior, beefing up the suspension with a push of a button!”
US-spec S50 has been treated to an M50 manifold and tuned by RK Tunes.
DATA FILE #BMW E36 M3 / #BMW-E36 / #BMW-M3-E36 / #BMW-M3
ENGINE AND TRANSMISSION 3.0-litre straight-six #S50B30 / #S50 / #BMW-S50 / US tuned by #RKTunes , #Rogue-Engineering DMS exhaust, UUC poly engine mounts, #Mishimoto radiator with electric fan, M50 manifold, #AFE 2 intake, #ZF fivespeed gearbox, #UUC poly transmission mounts, #Autosolutions Ultra Short Shift Kit, 3.38 LSD
CHASSIS 9x17” ET14 (front) and 10x17” ET20 (rear) polished Carline-CM6 wheels with gold hardware with 205/45 (front) and 215/45 (rear) tyres, #Neo-Chrome lugnuts, #Air-Lift-V2 / #Air-Lift digital air-ride, #BMW-Motorsport strut brace, ECS-Geomet cross-drilled and grooved discs, PBR-Axxis-Ultimate brake pads
EXTERIOR Daytona Violet, M Power-coloured pinstriping, #DJ-Auto headlights with FX-R 3.0 projector retrofit, Lux bumper grille, foglight covers, BMW Motorsport door handles, shaved filler cap lid, GT2 (Class II) spoiler with risers, LTW spoiler tray, carbon fibre side skirt splitters, modified GT rear splitters
INTERIOR Alcantara Grau M-Cross seats and panels, OEM carbon fibre centre console and glovebox trim, Motorsport International door sills, #BMW-Motorsport red seatbelts, Alcantara-wrapped Euro three-spoke steering wheel with Tri stitching, Alcantara gear and handbrake gaiters with Tri stitching, Alcantara armrest, E39 autodimming rear view mirror, #ZHP gear knob, #BSW speakers with subwoofer
THANKS Big thanks to my beautiful wife Cori, for supporting me through my builds, and my great buddies Brandon and James for helping me with all the maintenance and retrofits. I call this build my Purple Haze – a tribute to my dad and his Plum Crazy purple 1968 Charger.Stream item published successfully. Item will now be visible on your stream.