Toggle Sidebar
News Feed

Currently filtering items tagged with #BMW-E36-Coupe


  • Post is under moderation
    LIFE ON BOOST
    Turbos make everything better, as demonstrated by this hardcore, stripped-out, 356hp, turbocharged E36 325i. Finished in stunning Atlantis blue and with a turbo strapped to the engine, this E36 325i is a serious piece of kit. Words: Elizabeth de Latour. Photos: Andy Tipping.

    Generally speaking, adding a turbo to something will only make it better. Except if it makes it blow up… But apart from that, from humble turbo diesels to mental turbo drag cars with many thousands of horsepower, turbos make everything better, make people happier and generally make the world a better place. Just look at Brad Wherrett. He started out his motoring life with a Honda Jazz, followed by a modified Polo and a tuned Honda Civic. Then he bought an E36 325i and, understandably, life got better, but then he added a turbo…

    The E36 is 21-year-old vehicle technician Brad’s first BMW, and his profession has endowed him with the skills that make this sort of project somewhat easier than for those of us who can just about tell one end of a spanner from the other. His move from Japanese metal to Bavaria’s finest was seemingly an inevitable one. “The love for BMWs has run through the family for years,” explains Brad. “Since I can remember my dad and brothers have had BMWs – standard ones and modified ones – so I’ve been interested in them from a young age. For my first #BMW I decided to buy an E36 because I always liked the look of my brothers’ ones and I developed a soft spot for them.

    “I found the car on Autotrader, in good condition for its age, but a few dings here and there,” says Brad, “and I quite liked the idea of ‘stancing’ the car on BBS wheels or something similar.” That idea never came to fruition, and we’re glad of it because the end result is something a lot more special. In our humble opinion, we reckon Brad has struck just the right balance between wild and tasteful with his E36. The striking shade of Atlantis blue and the GT spoiler are the most eye-catching elements of the build, even more so than the top of the turbo peeking out of the bonnet cut-out, but it’s actually a pretty subtle car. There’s a lot of matt black elements that tone down that hit of blue and it just looks like a really meaty, purposeful piece of kit, which it most definitely is.

    It wouldn’t seem right talk about anything other than what’s going on under the bonnet of this car first and, usefully, the whole thing lifts off to give an uninterrupted view of what’s happened in the engine bay since Brad took charge of this 325i.
    Six months of work have been poured into the engine you see here, made up of late nights and weekends, but this was not simply a case of strapping a turbo to an M50 and hoping for the best, this engine has been stripped down and fully built to deal with the stresses and strains that forced induction was going to place upon it.

    This recipe for a turbocharged E36 begins with single a Vanos M50B25TU to which you then add M54B30 pistons mated to non-Vanos M50 con rods plus an M52B28 crankshaft. At this point it is a good idea to completely rebuild the engine with new timing chains, guides, tensioners, gaskets and so on because you don’t want to spend all that time building up an awesome engine only to have it break on you. The next step is to add ACL race bearings, ARP head studs, a decompression plate, monster Siemens Deka 630cc injectors and our old friend, the Bosch 044 fuel pump. With all that done, you’re finally ready to add your turbo and Brad opted for a Garrett GT35 twin-scroll snail, sitting on a custom top mount twin scroll exhaust manifold, with a Tial 50mm external wastegate and 50mm blow-off valve, feeding air through custom 3” pipework to a 600x300x76mm FMIC and into the engine via a serious-looking custom intake plenum.

    Brad then handed the car over to JamSport to wire in the ECU Master DET3 engine management and put together a base map. The end result of all that work is 356hp at 10psi of boost, which is a massive 164hp increase over the standard engine’s 192hp, a gain of more than 85%. You can’t be attempting to put that much power down without some suitably beefy transmission upgrades and here Brad has opted for an E36 328i five-speed gearbox with solid mounts, a Clutch.net stage five paddle clutch, braided clutch hoses and a 2.93 limited-slip diff from an E36 328i to help put the power down/do massive burnouts with.

    It’s fair to say that, as good as the stock E36 chassis is, it would struggle to deal with all that extra power, but Brad has not neglected this area of his E36 build. “If I’m honest, I got the TA Technix coilovers cheap and couldn’t say no,” he says. “I do have plans to upgrade them but I’m unsure of what brand to go for yet. I polybushed the car as some bushes were showing signs of wear and I decided to upgrade rather than fit OEM bushes.” This is definitely the way to approach any repairs on a project car and in addition to this, Brad has also added front and rear strut braces. The stock front brakes have been replaced with E46 330mm Brembo discs and pads while the rear brakes have also been replaced with standard-sized Brembo discs and pads.

    “When it came to wheels, I decided on Rota Grid Drifts because I’ve always liked the look they give. I considered something a bit more eye catching but in the end I settled for the Rotas.” The chunky, concave sixspoke design really suits the E36, especially in black against the Atlantis bodywork, and they are wrapped in Yokohama rubber at the rear with Maxxis tyres up front.

    Brad’s approach to the styling was the OEM+ look and it was definitely the right approach as everything he’s done to this car looks good. The M3 body kit gives it the cleaner, more aggressive styling the standard car needs and is further enhanced with the addition of the GT front lip and aforementioned GT rear spoiler. The stock mirrors have been retained but now wear carbon caps and the bootlid has been painted gloss black to match the spoiler. Brad has removed the exterior covers from the headlamps, giving them a more pronounced appearance while at the rear there’s a single, massive, Japanese-style exhaust tip.

    With the overall look and feel of the car, there was only ever really one direction to take with the interior and that was the hardcore, stripped-out route. The rear seats have been given the heave-ho while the fronts have been replaced with a pair of single-piece Corbeau Clubsport buckets with four-point harnesses. Brad has also fitted a deep-dish steering wheel, metal gear knob, an EGT gauge and HKS turbo timer plus the carbon fibre triple gauge panel from a Mitsubishi Evo VIII showing volts, water temp and boost, which looks great mounted below the clock on the centre console. The interior really suits the character of the car and with this much performance on tap, those seats and harnesses are most definitely not for show.

    This E36 is an awesome car. Everything about it looks right, the colour scheme is killer and it’s got a real sense of purpose about it. But the cherry on the top of this delicious slab of Atlantis blue goodness, and Brad’s favourite mod on the car, is the turbo. The fact that so much work has gone into the engine means 356hp is barely scratching the surface of what this setup is capable of and that means there’s scope for more power in the future, a lot more power. Brad is aiming for 550-600whp when the car is fully finished and running spot-on, which is going to be utterly insane and absolutely awesome with it. Whichever way you look at it, one thing’s for certain: everything is better with boost.

    TECHNICAL DATA FILE #BMW-E36 / #BMW-325i-turbo / #BMW-325i-E36 / #M50B25TU / #M50B25 / #M50 / #BMW-M50 / #BMW-325i-turbo-E36 / #BMW-3-Series / #BMW-3-Series-E36 / #BMW / #ECU-Master-DET3 / #M50-turbo / #Garrett-GT35 / #Garrett / #BMW-3-Series-Coupe / #BMW-3-Series-Coupe-E36 / #BMW-E36-Coupe / #BMW-325Ci / #BMW-325Ci-E36 /

    ENGINE 2.5-litre straight-six #M50B25TU / , fully rebuilt including new timing chains, guide tensioners, gaskets etc. M54B30 pistons, M50 non-Vanos con rods, M52B28 crankshaft, #ARP head studs, ACL race bearings, decompression plate, #Siemens-Deka-630 630cc injectors, #Bosch-044 fuel pump, custom top mount twin-scroll turbo manifold, GT35 twin-scroll turbo, 50mm Tial external wastegate, 50mm blow-off valve, 3” custom exhaust, 3” intercooler hardpipes, 600x300x76mm intercooler, custom intake plenum, Toyosports oil catch can, solid engine mounts, ECU Master DET3 engine management

    TRANSMISSION E36 328i five-speed manual gearbox with solid mounts, Clutch.net stage five paddle clutch, braided clutch hose, 2.93 328i limited-slip differential

    CHASSIS 9x17” (front and rear) Rota grid drift wheels with 235/40 (front) Maxxis MAZ1 tyres and 245/40 (rear) Yokahoma Advan AD08R tyres, TA Technix coilovers with adjustable top mounts, front and rear strut braces, polybushed all-round, E46 330mm Brembo discs and pads (front), E36 325 brakes (rear) with #Brembo discs and pads

    EXTERIOR Full Atlantis blue respray, M3 body kit, GT front lip, GT rear spoiler with risers, delensed headlamps

    INTERIOR Corbeau Clubsport bucket seats, four-point harnesses, stripped-out rear seats, dished steering wheel, exhaust gas temperature gauge, Mitsubishi Evo VIII carbon fibre gauge panel, HKS turbo timer

    THANKS The Paint Shop in Bruntingthorpe and JamSport in Northampton
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation

    AMERICAN AT HEART
    A supercharged #LS1 has created a monster of an E36. Whilst many E36 owners might dream of M3 straight-six or M5 V8 conversions, Ian Sutton has gone down a whole different route by fitting a supercharged LS1 V8… Words: Ben Koflach. Photos: Gary Hawkins.

    Engine options on the E36 from the factory were fairly plentiful – from the 102bhp 1.6-litre M40 to the 321bhp 3.2-litre S50 M3 Evo powerplant, BMW had it pretty well covered. But for some people – especially once you start talking modified car owners – too much is never enough, and we’re seeing E46 M3 straight-six, E39 M5 V8 and even some E60 M5 V10 conversions taking place more and more often. But while Bavarian horsepower is all well and good, why not think out of the box?

    The General Motors LS-series of engines, or #Crate-V8 s as they’re often known, are a common choice for those wanting a simple, effective and proven way of reliable horsepower. There’s simply no denying it – there’s no replacement for displacement – and these engines are being seen fitted to all manner of cars, from Corvettes to Camaros, trucks to 4x4s, and (most importantly in this story) even the Holden Monaro, otherwise sold as the Vauxhall Monaro and Pontiac GTO. Far from the small block Chevrolet V8 many people seem to mix it up with, most LS engines have an all-aluminium construction, fuel injection, and are generally a far more modern proposal than you might think. And considering their displacement, they’re pretty compact units too.


    Rewind just over five years, and you’d find BMW technician Ian Sutton thinking just the same – why doesn’t someone put the well-proven LS engine into an E36? He had the first part of the recipe, an E36 328i Sport, already, which he’d bought when he finished his apprenticeship at Coventry BMW and used for a couple of years before the Yank engine idea came up. Ian is also lucky enough to have a good friend who specialises in breaking the aforementioned Holden/Vauxhall Monaro, so you can see where the inspiration came from.

    Ian’s engine of choice was the 5.7-litre LS1 from early Monaros, his in fact coming from the US-spec Pontiac GTO. And once it was in his hands it was time to get to work.

    Not wanting to risk damaging his 328i in the process, he bought another one from work to use as a test shell for all the fabrication that would be involved. It was separated from its engine and the bay removed of all its clutter. Ian makes it sound so simple, but the next step was to hoist the GM V8 into the position he wanted it to sit and then fabricate mounts on the E36’s crossmember to suit – albeit after a bit of sump alteration to get it to fit behind the crossmember. At the same time it seemed the perfect opportunity to baffle it to avoid oil starvation during hard cornering. With the sump being off at that time, Ian decided to replace the standard con rod bolts with ARP items for added strength and durability.

    With that done and the engine positioning perfected, the gearbox mounts could be fabricated, and stage one of the build was complete. Of course, the engine and gearbox weren’t hooked up to anything other than each other, but at least they were positioned in the car.

    A full M3 Evo rear axle was to be used, so as with any engine transplant of this kind, a custom propshaft had to be manufactured first. Custom gear linkage was also created so that the gearstick could remain in the original position in the cockpit while governing the Tremec T56 six-speed gearbox from the Pontiac. Not content with leaving it standard though, Ian fitted a lightweight Spec aluminium flywheel, LS7 clutch, XRP braided clutch line and a GMM Ripshifter for faster revving and shifting.

    Around the same time, Ian’s Monarobreaking friend was over in Australia and had got talking to Scotty at Capa Superchargers, which is well known Down Under for offering forced induction for many different cars, including the Holden Monaro. It didn’t take long for Ian to be convinced, and before he knew it, the Vortech-based ’charger kit was sitting on his doorstep.

    Adding a whole new dimension to the build, it was soon discovered that the supercharger simply wasn’t going to fit the E36’s relatively narrow engine bay – not with the standard supercharger bracket anyway. With the help of good friend Gary, and with Ian having been part-trained as an engineer before becoming a mechanic, a plan was made, and the pair got straight on with measuring up the engine and bay (a painstaking process in itself, making sure all the pulleys lined up absolutely perfectly), then designing thier own bracketry for a variety of the components and having a local engineer construct it from billet aluminium. To keep the whole lot cool, Ian had Allisport fabricate the radiator, intercooler and oil cooler to his specifications, which all sit just behind the front bumper.

    The exhaust was yet another challenge, as not only did it need to take the gases from the V8 as efficiently as possible, it was a pretty tight squeeze between the E36’s chassis legs, too. The only solution was to go custom, and Wye Valley Garage – where the project spent much of its time – was able to help. A fully TIG-welded stainless steel exhaust system from the manifolds to the tailpipes is the result of their hard work, and we have to say it looks absolutely perfect, and the silencers are repackable too. Finishing off the installation itself is an almost headache-inducingly well planned combination of parts. From the custom power steering fluid tank (with a #BMW cap mind you), to the E46 M3 header tank, OEM (but not necessarily 328i, in case you start thinking this is the easy bit) hoses that can be found all around the engine bay, to the XRP aeroquip fuel and oil lines used throughout, it doesn’t lack in attention to detail. Such was Ian’s quest to make it all look as factory as possible, he’s even used OEM BMW hose clips rather than Jubilees! When the time came to move the engine, gearbox, supercharger, exhaust, crossmember and gearbox mounts over to his prized E36 – he wasn’t going to do it by halves either.

    They say a picture tells a thousand words, but let me tell you, even a thousand pictures couldn’t tell the story of just how immaculate this E36 is; Ian has rebuilt it bolt-for-bolt, using new components throughout, and powdercoating every part he could. You name it, it’s been uprated, replaced, or painted. The M3 Evo rear subframe and axle, M3 Evo front wishbones and hubs and brakes all-round, all new bushes, balljoints, links, Bilstein PSS9 coilovers, Eibach anti-roll bars… the list goes on. And it’s not just the underside that’s better than new, the bodywork is too, thanks to a bare metal respray. It really is astonishing, and it perhaps is only justified by seeing it in the metal.

    Fuelling and management was dealt with surprisingly simply – being an engine so popular for transplants, especially over the Pond, management solutions are very well catered for. First, the ECU was sent over to Capa to be unlocked, having all of its security limitations taken off and being given a base map on HP Tuners software. To match the airflow that the supercharger was bringing to the table, a Walbro fuel pump rated to 255 litres per hour pushes the fuel through a Fuel Lab filter and adjustable fuel pressure regulator, before being flung into the engine by 42lb injectors. It’s certainly a promising sounding combination.

    Rolling stock duties are put to #BBS LM replicas – Ian had originally wanted black centres with a polished lip, but there were differences between the 8.5”- and 9.5”-wide variants, so he went for all black rims with a subtle red line around the edges, and measuring 19” in diameter. The rest of the styling is a very much OEM affair, with a combination of M3 GT components, AC Schnitzer mirrors and subtle rebadging; the front and rear roundels having been swapped for carbon items, while the side rub strip badges – which Ian had custom-made by a local signwriter – now read supercharged.

    One of the final steps was the interior, which Ian wanted kept as stock as possible. Again, nothing but the best would do, so perfect black leather and as little clue as possible as to what engine lies beneath. M3 gauges are cleverly hooked up to work with the new engine, made possible by the HP Tuners software, and to keep a really close eye on what’s going on underneath the bonnet, Ian’s installed a trio of Autometer gauges in the centre console, monitoring oil pressure, fuel pressure and boost. Not only are they installed neatly, but Ian took a long time researching to find a range of gauges that matched the factory orange lighting so as not to look out of place – his attention to detail really is mind-blowing.


    The car made it’s debut at Santa Pod last year with great success, and on the strip it managed a 12.7 quarter-mile at 110mph – impressive, especially considering it was on a base map, and Ian was taking it easy. Of course he was keen to have it fully mapped to see what it could do, though, and John Sleath Racing was put in charge of the mapping, and the results were mightily impressive. A peak of 530.4bhp is only half the story – 550lb ft of torque is the kind of figure hardly any tuned BMW engine can boast, and especially not delivered in the same effortless way as the ’charged LS1, making it the ideal road car.

    While the engine may not be a traditional choice for an E36, Ian’s more than proved it’s a good one. With power and torque in abundance, as well as an incredible V8 soundtrack, an overall feel of OEM quality (and then some!) and increased driveability and performance, he’s really shown that it doesn’t have to be a BMW engine to feel original. So the purists may hate it, but there’s no denying that it’s incredible. If for some reason BMW had made its own LS1- powered E36, I can’t help but think it would struggle to beat the perfection that Ian has struck upon. Thinking out of the box? Pah, he’s blown it to bits.

    DATA FILE #Vortech / #BMW-E36 / #BMW-328i / #BMW-328i-E36 / #BMW-328Ci / #BMW-328Ci-E36 / #BMW-E36-Coupe / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series-Coupe / #BMW-E36-V8 / #BMW-E36-LS1 / #BMW-E36-GM-LS1 / #GM / #BMW / #Tremec /

    ENGINE: 5.7-litre #V8 #GM-LS1 / , #Vortech-V2 supercharger, #ARP con rod bolts, custom #ZF-PAS pump and mounting bracket, custom billet aluminium supercharger bracket and auto tensioner, custom baffled oil pan, #Earls-Performance oil thermostat, #Allisport custom front mount oil cooler, radiator, PAS tank with #BMW cap, front mount intercooler and pipework and oil catch tank, E46 M3 header tank, #Vortech-Maxiflow blow-off valve, 42lb injectors, #Walbro 255l/h fuel pump, #Fuel-Lab fuel filter and adjustable fuel pressure regulator, #XRP-Aeroquip fuel and oil lines, custom front cross member and engine mounts, custom fully TIG-welded exhaust including manifolds and repackable silencers, custom engine wiring harness, GM ECU with 2bar map and fully remappable HP Tuners software

    TRANSMISSION: #Tremec-T56 six-speed gearbox, custom gearbox mounts, Spec lightweight aluminium flywheel, LS7 clutch, custom propshaft, #XRP clutch lines and remote bleeder, #GMM-Ripshifter with custom gear lever, full E36 M3 Evo rear axle

    CHASSIS: 8.5x19” (front) and 9.5x19” (rear) #BBS-LM replicas shod in 225/40 and 265/30 Falken FK452s respectively. Bilstein PSS9 coilovers, #Eibach anti-roll bars, M3 Evo front wishbones and hubs, AC Schnitzer carbon front strut brace, custom lower strut brace, Z3 M quick steering rack; full nut and bolt rebuild including all new bushes, balljoints and links with all new components powdercoated. E36 M3 Evo brakes all-round (315mm discs front, 312mm discs rear) with Performance Friction pads all-round and XRP braided lines

    EXTERIOR: Full bare metal respray in original Arctic silver, face-lift nose cone, M3 Evo front splitter, M3 GT corner splitters and M3 bumper mesh, M3 GT two-piece rear spoiler, AC Schnitzer mirrors, carbon fibre front and rear roundels, supercharged badges in rubstrips

    INTERIOR: OEM full black leather interior, #AC-Schnitzer short shift gear knob, E36 M3 clocks with oil temperature gauge, #Autometer boost, fuel pressure and oil pressure gauges, Alpine CDA 105 RI head unit

    THANKS: www.wyevalleygarage.co.uk for the exhaust, fabrication, workspace and storage (01989 565001), www.lsxv8.co.uk for LS spares and conversions, Allisport (01452 751187), Scotty at Capa Superchargers (006 1885 823499), John Sleath Racing for the mapping (07976 751742), Nic J Racing (07970 192715), Gaz, Slim and Zip, Sytner BMW Birmingham Parts Department

    Ian and the friends that have helped him make it look easy – modifying and baffling the sump and fabricating engine mounts, the exhaust and the supercharger bracket as well as many other parts. There’s also the tuning itself to consider, with the lightened flywheel and other uprated transmission components,
    the supercharger and intercooler, and of course all the pipework and hoses, which all look OEM. A dimple had to be made in the inner wing to fit the ’charger too.

    Combine that with practically rebuilding the entire car with everything renewed and powdercoated, and you can see what makes the car quite so amazing.

    Other than the noise, the average passenger wouldn’t know the difference.
    Unshakeable power – 5.7 supercharged American litres worth of it in fact – oof!
    There’s simply no denying it – there’s no replacement for displacement.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation

    PERFECT EXAMPLE #BMW-E36 / #BMW-328i / #BMW-328i-E36 / #BMW-328Ci / #BMW-328Ci-E36 / #BMW-E36-Coupe / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series-Coupe /

    This full-on E36 328i combines aggressive styling with serious turbocharged performance. Many have tried, and many have failed. The quest for the perfect modified #BMW is an arduous one, but our US contributor thinks he may just have found it. Words & Photos: Eric Eikenberry.

    In the days of yore, men of differing opinions used to gather in remote locations to shout vociferously at one another, clash shield upon shield, sword upon sword, all in the name of settling the score. In today’s infinitely more modern arenas, the shields and swords have been discarded in favour of wings and air dams, ICE and carbon fibre. The battle cry is far different too. ‘JDM’ or ‘DTM’. Where do your allegiances lie? If you’ve picked up this magazine, that choice is pretty clear. As such, we present to you your champion, Ryan Castro’s #1997 E36 328i. All hail your king!

    At a recent JDM-DTM shootout held in California, Ryan not only laid to rest the JDM dragon, he also captured an overall show trophy for Best Modified. With his comprehensive and well thought out modifications, not only is this ride an incredible showpiece, it packs the punch necessary to decimate its rivals on the strip or track.

    Ryan has a dream job that allows him a great deal of leeway in his choice of transportation. Sure, it’s not as grand as what us motoring journalists do for a living – testing cars for you, our readers – but still it’s the tops. Ryan is one-third owner of DP Engineering (www.dpengineering.cc). This means he gets to play with forged wheels all day long – just like the wheels you see here on this car.

    These gorgeous 8.5x19” and 10x19” two-piece, fully-forged R06VS beauties are produced by DP Engineering, and are wearing 235/35 and 275/35 Falken Azenis rubber. The black anodised centres are polished to a high gloss. Since he prefers the deep-dish look, the fronts feature a 3” lip, while the rears sprout a staggering 5” shelf.

    Tucked away inside are front and rear Brembos, silver-painted and the size of dinner plates. 15” cross-drilled front rotors ride on floating pins, while 11.6” rear rotors are gripped by two-pot, lightweight calipers; fronts by four-pot F50 units. Looking a bit further under the car reveals a KW Variant II coilover suspension setup and Racing Dynamics roll-bars. These six-way adjustable suspenders, with ride comfort adjustment, ensure that Ryan gets the look he wants without the need to keep his chiropractor’s number on speed-dial.

    Helping him achieve that look is the überrare (here in the US) Esquiss’ Rafale Widebody kit with carbon fibre inserts. Very subtle E30 M3-style flares are combined seamlessly with wild arches to cover the massive wheel/tyre combo. Over the top of that Ryan laid the BMW Chrome Shadow concept paint. This trick paint is composed of a base layer which is black, while the top layer is ultra-smooth silver. In full sunlight, the finish is like a pewter-coloured mirror.

    At night, it becomes a dark grey. “I wanted the car to have a clean, classic look that would always be in fashion,” he explained. “Kind of like an Armani suit, it will always look good.”

    But what would any good suit be without the additional accessories to top it off? Browsing through the supplied spec sheet, we wondered if it would be easier to just list the items Ryan didn’t modify! The emblems have all been shaved and there are carbon fibre mirrors, side skirt inserts, front splitter and rear wing. There’s a custom roof spoiler, bonnet vents, E46 headlight eyebrows and an aviation-style fuel filler cap. A set of Kool Kustoms E46 M3 painted mouldings and M-Tech side mouldings complete the look, while Euro Clear’s custom smoked clear marker lights fill the corners. On top of all of this, there are no windscreen wipers! Clearly, this is a testament to the car’s enviable Southern California residence.

    Ducking one’s head inside provides a plethora of extravagant eye candy in every direction. We particularly liked the Blitz DC turbo, oil pressure, and temperature gauges mounted directly to the windshield and cabled to a Blitz Live Unit controller. Just like on the outside of the car, if you can find an original part here, we’ll give you a big pat on the back.

    Like the rest of the interior, the front Cobra Sidewinder fully adjustable seats have been retrimmed in grey and black with red trim by Kreative Interiors. Wedge Engineering seat rails ensure a safe place to park one’s bum while Sabelt three-point safety harnesses keep you there during even the most hair-brained manoeuvres.

    A custom chrome, four-point roll-cage helps to stiffen the already rigid BMW coupé’s chassis. Carbon fibre again abounds, noticeable in the dash, gauge surrounds, gauge rings, airbag lid, centre console, door inserts and rear panels. Not to be outdone, aluminium puts on a good show as the BMW gear knob, UUC pedals and left footrest, UUC handbrake handle, and custom diamond-plate Legend 5 floor mats are all made of the polished metal. Ryan’s hands grip a Momo Champion steering wheel during the rare occasions he actually gets to drive this stunning ride to the local McDonald’s.

    Where a rear seat once resided, there’s a chromed Nitrous Oxide bottle and two 12” Massive Audio subs. Naturally, they’re mounted in a carbon fibre enclosure. In fact, there’s so much of the stuff in this one car we’re afraid Ryan’s driven the price of the world’s supply to a new peak!

    The centre console is home to a 7” NESA screen, and there are even Game Port plug-ins for Ryan’s favourite video games. A Pioneer DEH-840MP DVD/VCD/MP3 head unit drives the tunes to the three 600W Massive Amps amplifiers and the Diamond HEX 500 S components.

    Hidden somewhere are two Optima Blue Top batteries and two 1.5-farad Massive capacitors. Ryan’s also installed a High Tech RV Isolator to keep the current clean and noise-free. In the boot, his carbon fibre (yes, still more) amp rack is topped by custom Plexiglass amp surrounds lit by glowing blue neon.
    Of course, all of this show gear would barely be enough to turn heads here in the States if there was no power backing it up. A wise man would think twice before picking on this car in a drag race. A polished Turbonetics 60-1 T3/T4 Turbocharger boosts the 328’s engine into orbit, placing 430hp on the tarmac at the rear wheels.

    Carbon fibre and polished aluminium again rule supreme, providing a wicked silver/black appearance throughout the compartment. The fully custom Stage 2 turbo setup utilises an Aquamist water/alcohol injection system, a Blitz SBC-iD sequential boost controller, along with an HKS Super-Sequential blow-off valve and a Turbonetics Deltagate external wastegate to keep the hyped-up airflow under tight control.

    The Nitrous Express Stage 2 kit purges the intercooler while a high flow fuel pump, boostsensitive fuel pressure regulator and RC Engineering 35lb injectors feed the beast.

    Billetwerks black anodised engine caps keep all fluids in their intended locations. The DME is reprogrammed and there’s a Euro mass airflow meter, and yet, surprisingly, the car remains emissions-legal as far as expelling gases is concerned.

    Speaking of exhaust, Ryan had a custom 3” piping system constructed with a custom race muffler and Borla carbon fibre tips. It seems that he has a CF fetish (Nothing to be ashamed of ~ Ed): Vortiel CF engine cover and fuel rail cover, CF fusebox cover, and a CF radiator cover ensure that the entire compartment is appropriately dressed. Sun Auto supplied its Hyper Ground and Hyper Voltage systems, keeping the current flow more than adequate. Ryan is even planning a Standalone ECU upgrade in just the next few days.

    The car’s original five-speed transmission (one of the few non-modified items on the car) is in fact surrounded by helpful bits. A UUC short-shifter keeps the gears on target while Delrin bushing hold it securely in place. Redline synthetic lube swishes around inside, keeping the gears happy under the abuse dished out by the motor. The rear differential has been upgraded to a limited-slip item with 3.15:1 ring and pinion. A UUC aluminium 8.5lb racing flywheel and a 1993-95 M5 clutch ensure that horsepower isn’t needlessly wasted.

    In the end, is it indeed a rolling Armani suit? Let’s crunch the facts and see. Classic pre-Bangle Germanic good looks? Check. Tasteful accessories integrated flawlessly into the package? Check. Outrageously good-looking black shoes? Check. An ICE system so intense it could host movie premieres? Check. Rocket-ship acceleration and ‘hand of God’ braking? Check. Yep, it’s the real deal. If Armani made clothing for Robocop, this is probably what it would look like, and that has Ryan’s JDM competition running scared.

    “not only is this ride an incredible showpiece, it packs the punch to decimate its rivals on the strip or track”

    DATA FILE / #Turbonetics / #Turbonetics-60-1-T3 / #Turbonetics-Deltagate / #Apexi-GTR / #M52B28 / #BMW-M52 / #M52 / #M52-Turbonetics / #DP-Engineering /

    ENGINE: 2.8-litre six-cylinder with polished #Turbonetics 60-1 T3/T4 turbocharger, Turbonetics Deltagate external wastegate, #HKS super sequential blow-off valve, HKS Type I turbo timer, #Blitz SBC-iD sequential boost controller, polished AA intake elbow, custom turbo manifold, chromed downpipe and intercooler piping, polished #Apexi GTR intercooler, Turbonetics custom end tanks, #RC-Engineering 35lb injectors, custom #K&N turbo intake. Custom Aquamist water-alcohol injection kit, #Nitrous-Express-Stage-2 kit for custom intercooler purge, NX bottle warmer. NGK race plugs, high flow fuel pump, boost sensitive fuel pressure regulator, HKS air/fuel ratio control, Vortiel carbon engine cover and fuel rail cover, carbon fusebox and radiator cover, Euro mass airflow meter, BMP oil filter cooling fins, reprogrammed DME, custom race exhaust with carbon fibre #Borla tips, 3” racing exhaust piping, Billetwerks black anodised engine caps, Sun Auto hyper ground system and hyper voltage system. Standard five-speed manual with UUC short-shifter, Delrin bushings, Redline fluids. Upgraded LSD to 3.15, UUC aluminium 8.5lb lightweight flywheel, E34 M5 clutch, custom tranny mounts

    PERFORMANCE: 430bhp at the rear wheels

    CHASSIS: 8.5x19” (front) and 10x19” (rear) #DP-Engineering-R06VS alloys with 3” lip (front) and 5” lip (rear) shod in 235/35 and 275/30 Falken Azenis tyres respectively. #KW-Variant-II coilovers with ride comfort adjustment and six-way height adjustment, Racing Dynamics sway bars and strut tower bar. 15” #Brembo four-pot brakes (front) and 11.5” two-pot brakes (rear) with silver calipers all-round, cross-drilled rotors, stainless steel brake lines, Brembo pads, racing DOT 5 brake fluid

    EXTERIOR: Full Esquiss’ Rafale Widebody kit with carbon fibre pieces painted in Chrome Shadow #BMW concept paint, carbon fibre mirrors, side skirt inserts, front splitter, roof spoiler and bonnet vents. Fibreglass inner wheel wells, E46-style headlight eyebrows, de-badged, aviation-style fuel filler cap, Kool Kustoms E46 M3-style painted mouldings, M-Tech side mouldings, de-wipered. Euro front clear lights and side repeaters, custom smoked rear lights, 4300K HID low beams, custom H7 foglights, angel eyes with fibre-optic lighting, Showoff Krypton bulbs, H1 high beams

    INTERIOR: Full Kreative Interiors interior retrim in grey/black with red trim, two Cobra Sidewinder fully adjustable seats, Wedge Engineering seat rails, #MOMO Champion steering wheel, custom four-point roll-cage, Sabelt three-point safety harnesses. Carbon fibre dash, gauge surround, airbag lid, centre console, door inserts and rear panels, silver gauges, chrome gauge rings, custom painted centre console, BMW OEM aluminium gear knob, UUC pedals, clutch stop and handbrake handle, Legend 5 aluminium chequerplating floor mats, Blitz DC turbo, pressure and temperature gauges, Blitz live unit

    ICE: 7” Nesa monitor, Pioneer DEH840MP, DVD/VCD/MP3 player, pair of Massive Audio 12” subs, 3x600W Massive amps, Diamond mid-bass, Diamond HEX 500S components, pair of Massive farad capacitors, pair of Optima Blue-Top batteries, High Tech RV isolator, game port plug-ins, custom carbon fibre box enclosure and amp rack, custom Plexiglass amp surrounds, blue neon lighting, Accessories 12V transformer, sandblasted ‘Kinetix’ sign-board

    “I wanted the car to have a classic look that would always be in fashion; like an Armani suit, it will always look good”
    Stream item published successfully. Item will now be visible on your stream.