- Post is under moderationThis may have been Sean Clark’s first car in high school, but it’s all grown up now, with a level of refinement fit for a whiskey lounge. Words: Marcus Gibson / Photos: Adam Croy
BODY-SLAMMED BMW E30 TEST LEARN THE FUNDAMENTALS OF BUILDING A DRIFT CAR / #1987 / #BMW-318i-E30 / #BMW-318i / #BMW-E30 / #BMW / #Toyota-1UZ-FE / #BMW-E30-Toyota-1UZ-FE / #Toyota / #Accuair-i-Level / #BMW-E30-V8 / #V8
Purchased as his first car in high school, Sean Clark’s E30 is all grown up now with a class that belongs in a whiskey lounge. V8 powered, with Accuair i-Level, one-off Rotiforms, candy paint and a killer interior, this E30 ticks all the boxes.
As the NZPC team members stood around with our tongues out, drooling over Sean Clark’s #BMW E30 during the photo shoot, in walked the guys from our sister magazine NZ Classic Car, who proceeded to make tongue-in-cheek remarks about how the suspension must be broken and ask where the hell the tyres were. Now, these guys know their way around an E30, but, given that the IS front lip was literally sitting on the ground while its rim lip was touching the guard, we could see how those old boys would be somewhat perplexed by what they saw in front of them. This car is a statement made with no apologies — it was engineered this way, what with its millimetre-perfect fitment and extremely deep candy paint, which grabs and holds your attention long enough to take in all the custom touches that can be found.
It all began during Sean’s high-school days (actually, four years ago, to be exact), when he came across an E30 already fitted with a Toyota 1UZ-FE 4.0-litre V8. A fan of the German ’80s icon, Sean hadn’t been looking for V8 power, but, when this popped up already cert’d, he saw it as a good base on which to build his dream E30. It was in need of some TLC, but, being a high-school student, he would have to wait until he got his first full-time job before he could sink some coin into the project. In the meantime, though, he was probably only the only kid at his high school rocking a V8 on a daily basis.
The air-management system runs a set of polished custom hard lines to feed the tank, AccuAir A4, and Air Lift air bags. The system has a wireless remote and can even be controlled by an iPhone app.
It doesn’t take a genius to figure out that Sean is mainly influenced by mostly European-based E30s, which led to the first of the big modifications, as he told us: “All of my favourite E30s are on air. That was the first major modification I did. Simon from Get Low imported and installed the kit.” Getting the E30 down was a simple bolt-in affair using Air Lift struts with adjustable dampers. Like most of the latest air-ride kits we feature these days, Sean opted for a complete height-management system, in this case, AccuAir. With three preset heights — low, lower, and slammed — it’s a no-brainer over the finicky switch box and separate valve blocks of the past.
Those kits were loud, high maintenance, and it was a battle to get the height perfect. Having the control that Sean now does is a good thing when the lip of the rim actually sits square on the guard when fully deflated.
It was around that time that the E30 received its first set of rims, though those BBS Rs were soon replaced with custom fifteen52 Tarmacs, then, more recently, with a set of custom Rotiforms. To say Sean has a thing for wheels would be a gross understatement — but his size preference certainly made it hard. “I get bored of wheels pretty easy, and wanted to go three-piece and have something that would pop against the paint more,” he explained. “I talked to just about every wheel company out there, but the problem is that no one really makes three-piece 16s any more. I ended up getting James from 360 Link to convince Brian from Rotiform to produce these.” We are unsure what James from 360 Link said — perhaps he has a stash of questionable photos of Brian, or maybe Brian thinks all Kiwis are like Jake the Muss; either way, Rotiform obliged and put together this one-off set using BBS lips and gold hardware.
To further customize them once they landed in New Zealand, the boys at GT Refinishers laid down some candy and gold leaf on the centre caps.
The boys were also charged with a complete facelift conversion last year. Now, it might be a bolt-on conversion up front, but the rear took a little more commitment, as the team had to graft in the in the rear sheet metal from a later E30 around the boot and tail lights.
This required a facelift E30 to donate its life to the cause. The tail lights Sean chose are rare BMW Motorsport items imported from Germany, along with the Bosch smiley headlights and an MTech wing. The last job at GT was the reshaping of the rear guards to suit the super-low ride height. It was then on to deciding a colour — a job we wouldn’t wish on our worst enemy. A four-month internal battle ensued as Sean went back and forth with his decision, eventually landing on custom candy red, sprayed over a silver base coat. “There are 10 coats all up I think, as I kept wanting it darker and darker. I was actually out of the country when he was spraying it so it was a little nerve-racking,” he said.
But, needless to say, Sean is hyped with how the exterior has turned out, and he has since shifted his focus inwards. First up, he went for a full interior retrim from Midnight Upholstery. Taking cues from the king of refinement, Singer, the front and rear seats were trimmed in a similar fashion to those beautiful Porsches. The front seats are actually Recaro fishnets from an Isuzu Bighorn that Sean scored for $100, and the rear is a not-so-common E30 variant with a centre armrest. As for the rest of the interior, it was kept all class in black — simple yet effective. The finishing touch, a vintage Momo Prototipo wheel.
Next on his hit list is attacking the engine bay. While the build has never been about all-out power or speed, and with the four litres there’s more than enough juice to decimate the factory equivalent, Sean still feels there is room for refinement, and he’s currently considering his plan of attack — individual throttle bodies (ITBs)? A supercharger? Who knows what he’ll end up with? We guess we will all have to wait and see. But, in the meantime, there is a long hot summer ahead of us, and Sean is ready to make the most of it with one push of the e-Level.
SEATS: (F) Retrimmed #Recaro LX, (R) retrimmed factory
STEERING WHEEL: #Momo Prototipo 350mm
INSTRUMENTATION: AccuAir e-Level
EXTRA: Custom headliner and carpet, custom boot set-up.
PAINT: Custom candy red by GT Refinishers
ENHANCEMENTS: Facelift conversion, IS front lip, IS sideskirts, custom front splitter, MTech 1 wing, German smiley headlights, German MHW tail lights, custom round Condor door handles.
GEARBOX: Toyota four-speed auto
DIFF: BMW E30
The body has recieved a facelift alongside some subtle upgrades such as the IS front lip and #MTech rear wing. Although it was bagged long before the facelift, yet the lip sits perfectly flush on the ground.
DRIVER/OWNER: Sean Clark
BUILD TIME: Four years
LENGTH OF OWNERSHIP: Four years
THANKS: A huge thanks to GT Refinishers; Get Low Customs; Midnight Upholstery; Rotiform New Zealand; my mate Daniel, for listening to me stress over the smallest of things and helping out
Discovered in an Isuzu Bighorn bought for $100, the Recaro fishnets have been retrimmed by Midnight upholstery in a Singer style, with bronze rivet vents.
ENGINE: #Toyota-1UZ-FE , 4000cc, eight-cylinder
EXHAUST: Custom headers, dual 2.5-inch pipes into single muffler
COOLING: Fenix radiator
STRUTS: Air Lift Performance air ride, KYB rear shocks, #AccuAir-E-Level , #AccuAir #iLevel
BRAKES: (F) #Wilwood four-pot calipers, #StopTech rotors, Wilwood pads, braided lines; (R) factory
WHEELS: (F) 16x8.5-inch #Rotiform three-piece forged CCV, gold hardware; (R) 16x9.5-inch Rotiform three-piece forged CCV, gold hardware
TYRES: (F) 195/40R16 Falken, (R) 205/40R16 Falken
Fitting the Lexus into the engine bay required a set of custom headers and has left little room for anything else, which could become a problem if Sean does decide to supercharge down the track.Stream item published successfully. Item will now be visible on your stream.