Toggle Sidebar
News Feed

Currently filtering items tagged with #BBS-LM


  • Post is under moderation
    FORCED INDUCTION FRENZY!

    BOOST MODE #Stunning 610 whp turbocharged E36 M3 turns up the heat. Cars are meant to be driven and it was that realisation that took this E36 M3 from mild to wild.

    JUNKIE BOOST Words: Elizabeth de Latour Photos: Patrick Lauder

    Dean Yarza never intended for his E36 M3 to turn out this way. He’d always wanted one, that much he did know, and finally owning one was the fulfilment of a high school dream, even though it followed a modified E46 M3 ZCP. You might have thought that his former car would have been the keeper, the big one, because it was an E46 M3 after all, but life’s not always that straightforward. That Dean has been dreaming about owning an E36 M3 since his high school days is no surprise; this is a man who, briefly, owned a hand-me-down E21 323i as his first car and who admits to having been interested in BMWs since first being able to drive.

    The Carbon black 2005 E46 M3 that he purchased in 2006 was where his BMW journey began proper, Dean having experimented with numerous vehicles prior to that. “I’ve basically modified everything I’ve owned since high school, giving in to the typical sickness the everyday car nut suffers from and I do not discriminate when it comes to the hobby,” he grins. This explains why his car ownership history includes an Acura Integra on nitrous, a couple of Saleen Mustangs and a Saleen Cobra, all of which ended up running over 500whp courtesy of aftermarket superchargers, a Ford F150 truck and even a couple of Yamaha R6 bikes. It’s a varied, colourful automotive past in which Dean has sampled all manner of modified machinery and that most certainly did not stop when the M3 entered his life. “I modified it with all the NA boltons including long tube exhaust manifolds, performance pulleys, air filter, 4.10 gearing and a performance tune. The exterior was also fitted with the full line of Vorsteiner VSL pieces – front bumper, rear deck lid and diffuser. 19” BBS LM rims and a Brembo GT brake kit were also installed,” completing what sounds like a thoroughly sexy and sorted M3. So why the switch from 46 to 36?

    “After parting with my E46 M3, I yearned for another M and, more importantly, something to give me purpose, spending hours on forums researching and purchasing parts. At the time, it was the perfect platform to satisfy the need to handle, perform, and modify while being fairly painless to attain,” explains Dean though, in truth, the E36 did almost put the brakes on his modding addiction but, as we all know, you just can’t fight it…

    “As many E36 owners know, it’s a bit tough to find them in a non-abused state in today’s market,” he says, and he’s not wrong. “After failing to find one to my liking for a few months, I put out a wanted add online and, amazingly, received a response for what was almost exactly what I was looking for. Prior to my search, I’d curbed my expectations, accepting the fact that these cars are close to 20 years old and I wasn’t going to find a gem. My initial want was just for a clean-titled, decent paint/interior M3 knowing that 90-110k miles would be the norm. What appeared in response to my add was a single-owner, excellent condition M3 with only around 33,000 miles, completely stock, still with the break-in instructions applied to the windscreen, as well as the original window sticker still in the glove compartment. It was far too pristine but in no way would be passed up.” That sounds like a once in a lifetime find to us and it would have been very silly of Dean to turn down the opportunity to own such an immaculate car, but it was the car’s virgin state and lack of miles that presented Dean with a bit of a quandary. “Prior to finding one with such low mileage, my plans were night and day from what the car is now,” he says.

    “I initially only wanted something I could drive every day and everywhere, occasionally having weekend duty for spirited driving in the hills. To do this, I planned nothing more than a capable coilover set and a nice wheel and tyre combo. In a way, I just wanted a cool car I could really beat on and not care too much about,” but obviously that couldn’t happen now and a different approach to the whole ownership and modding outlook had to be taken. In fact, as we mentioned earlier, Dean wasn’t even sure whether modifying was the right thing to do. “As I did not plan to find such a low mileage/collector type of car, it was a tough decision to modify,” he says, before adding “ but eventually the bug got the better of me,” and so things began to happen.

    Suspension and wheels came first, as per his original plans; “Knowing that I did not participate in high performance driving/autocross events, I was looking for something simple in terms of handling and comfort,” Dean explains. “The Bilstein PSS9 kit fits this bill as it is a basic coilover setup which is not too aggressive while offering, in my opinion, one of the most comfortable rides for a coilover while still improving handling capability. Along with this, I’ve also chosen a set of Dinan front and rear strut braces and a BMW X-brace, which is found as standard on the M3 LTW.” Handling benefits aside, the adjustable ride height of the PSS9s means that Dean has been able to dial-in his perfect stance and the drop he’s gone for is serious; those front arches are a hair’s breadth above the rubber while at the rear he’s got the tyres tucked just past the edges of the lips and the result is spectacular.

    As far as his wheel choice is concerned, for many BBS fans it’s the holy grail for both modern and classic BMWs alike and a wheel he has a lot of love for. “It was only fitting that for a classic M3 I’d want to stick with classic wheels. My favourite wheels for the BMW have always been BBS LMs, I feel you can put these on any car and drastically improve the look, especially European applications. I owned a set on my E46 M3 and had nothing but positive experiences with them in regards to looks, performance and strength. You get what you pay for with wheels and in my eyes, they are half of the car. I did consider other wheels but this was very short-lived, I was set on LMs for my build. It turned out to be very difficult to find a set, though, as 18s were much harder to come by than the typical 19” and above. Luck still was not on my side which forced me to become a little more creative and experiment with a set taken from a Honda S2000. This presented a bit of a challenge as the offset and PCD were different but after some research I found a local wheel customisation shop which was able to adjust bolt pattern as well as offset to get them to fit correctly.”

    It’s safe to say it was worth the effort as the LMs look so good on the E36, as they do on just about any BM, and here they’re finished off with a BBS stud conversion kit and those iconic red centre caps.

    That’s all well and good, but the real reason we’re here is for what’s under the bonnet and it took a bit of a personal revelation for Dean to make the huge leap from mild NA mods to off-the-scale, full-on forced induction fury. “I found deals on the basic bolt-ons such as a Dinan CAI and Dinan exhaust and the car stayed in this state for quite sometime as I did not want to overly modify it, risking an adverse affect to the car’s value considering its mileage.

    Eventually, realising that cars are meant to be driven and I would not be satisfied until I had it the way I wanted, I decided to open the floodgates and enjoy it while I have it,” he says and this is definitely the right philosophy. “After the basic bolt-ons, the turbo research began brewing and opened up a whole new world. For one whole year, I began researching and stockpiling the turbo components needed for my build, beginning with the actual turbo, a Garrett GT35R and SPA T3 manifold, fuel components, Cut-Ring head gasket, and Zeitronix data logging gauges and equipment, the essentials I needed to get started. After a year acquiring these components – and then some – it was all installed in one shop sitting, taking a few months to complete.

    “The car was taken to David Tran at 4B Auto in Santa Clara, CA; David is known to have built some of the fastest turbo E36s around with upwards of 1000hp, so I knew I was in good hands with this build,” says Dean. “The motor was disassembled, having to remove the head for resurfacing, while upgrading the head studs with an ARP2000 10mm stud kit. From there, the stock head gasket was also upgraded to an 87mm Cut- Ring head gasket. When the head returned from resurfacing, the SPA T3 turbo manifold was mounted while the Vanos was also rebuilt and the head was finally ready to install. Once the engine was reassembled, various changes were made including upgraded fuel components such as a Rally Road high-flow billet fuel rail, 115lb high impedance injectors, and an Aeromotive adjustable fuel pressure regulator. The intake manifold was also swapped for an M50 model for better flow. Impressive to say, the engine was able to fire up at first attempt with no hiccups. David’s engine work was one of the smoother processes throughout.”

    High praise indeed and there’s nothing better than a true turn-key conversion that just works, especially after such a huge amount of work. A quick glance at the engine spec is all you need to know that this is a serious performance project but all that research and time spent on it was absolutely worth it.

    It enabled Dean to pick the best components and the ones best suited to helping him achieve his end goal, and all that work has yielded some astonishing numbers. Peak power now stands at 610whp, which is around 700hp at the crank however you like to do your calculations, and is backed up by 571lb ft of wheel torque, both serious numbers and definitely plenty to be getting on with.

    Obviously, as well as the suspension upgrades that were carried out before Dean let loose, the chassis and transmission have received further modifications to be able to cope with that huge increase in output over stock. First of all, there’s a big brake kit in the shape of Brembo’s GT kit and before we even get onto the specs those red calipers are just killer and work perfectly alongside the red detailing on the LMs and against the white bodywork.

    They do, of course, deliver on the braking front too, but then you’d expect nothing less with four-pot calipers and 355mm discs stationed up front and only a fractionally smaller pairing located at the rear. As far as the transmission is concerned, Dean has bolstered the ZF five-speed manual gearbox with a selection of UUC components, including a twin-disc flywheel/clutch combo, steel clutch line, and short shifter, all of which combine to allow it to far better cope with all that power and torque.


    What we really love about Dean’s E36 M3, and we love everything about it, is the fact that, really, there’s no way for you to know just how much power is lurking beneath that pristine white bodywork. Obviously it’s not a stock car, but he’s kept all of the styling within the spectrum of normality and as a result there’s little to suggest that this might be nothing more than a lightly breathed-on older M3. “My intention for the exterior was something not too aggressive; basically maintain the stock look and body panels yet add some touches to give a slightly more aggressive look,” and we’d say it’s mission accomplished. Euro lights have been sourced from ECS Tuning and fitted all-round, along with a set of ZKW HID projector headlights; a Max Velocity RS front lip sits beneath the front bumper for a hint of extra aggression, while at the rear there’s a Mateo Motorsports diffuser and a sexy UUC adjustable carbon spoiler. The interior has been kept largely standard, bar the addition of numerous gauges and a few minor tweaks that enhance what was already there. The Vader front seats, finished in Mulberry-colour leather, have been left alone and Dean has added some M3-logo’d mats, a customwrapped Euro three-spoke steering wheel and MT Shift Boots alcantara gear lever and handbrake gaiters to complete the look.

    Four years of ownership are what it’s taken to bring the E36 to this level and while it has clearly been worth the effort, there has been a lot of it involved in getting the car to where it is. As Dean himself says “I currently have no plans for a next car, other than possibly a modern 5 Series daily driver. At this point, I may have exhausted all energy to even think about starting yet another project,” and that’s something we can all relate to it, that feeling of near-exhaustion when you’ve “finished” a project, or at least got it to the next stage of its evolution. Of course, this M3 has not finished evolving, not in the slightest. “A contingency plan is actually already in place,” says Dean.

    “Simultaneously with the turbo install, I have also been working on a fully-built spare motor capable of 1000hp, which was also completed about the time the turbo install was competed. Also on hand is a full drivetrain upgrade, which includes a Euro six-speed 420 Getrag transmission, DSS six-bolt 1000hp driveshaft, upgraded rear axles, and a large case 210mm limited slip differential from a 1990 BMW 750iL.

    The only future decision to be made now is which turbo and manifold configuration to fit. With the upgraded turbo and motor, the car should be able to generate and handle even more power with ease. If any mishaps were to occur, these components are ready, that is if impatience does not get to me first and I proactively go ahead with the swap.”

    That’s a very sensible approach to take with a completely unhinged project, and we whole-heartedly approve. Dean’s E36 is pure performance: there’s no frivolity here, it’s full-on, focussed and furious with it, and we love it.

    “After the basic bolt-ons, the turbo research began brewing and opened up a whole new world. For one whole year, I began researching and stockpiling the turbo components needed for my build”

    TECHNICAL DATA FILE #BMW / Turbo #BMW-E36 / #BMW-M3 / #BMW-M3-E36 / #BMW-M3-Turbo / #BMW-M3-Turbo-E36 / #Garrett / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-E36 / #BMW-3-Series-M3-E36 / BMW

    ENGINE 3.2-litre straight-six #S52B32 / #S52 / #BMW-S52 , Cut-Ring 87mm head gasket (stock compression), #ARP2000 head studs, #Garrett-GT3528R dual ball-bearing turbo, #SPA-T3-turbo manifold, 610x305x76mm front-mount intercooler, #Tial 50mm blow-off valve, Tial 44mm MVR wastegate, M50 intake manifold, #Mishimoto coolant overflow, Mishimoto performance aluminium radiator, #Steward high-performance water pump, RK Tunes E85 turbo tune and MAF, 115lb high impedance injectors, Rally Road high-flow billet fuel rail, Aeromotive adjustable fuel pressure regulator, Vibrant intake filter, custom fabricated 3” stainless steel down pipe and exhaust system, #Vibrant turbo muffler, #Radium-Engineering oil catch can, #Radium-Engineering 12 micron fuel filter, Racetronix Fuel Pump wiring harness, Walbro 485lph fuel pump

    POWER AND TORQUE 610whp, 571 lb ft wtq

    TRANSMISSION Five-speed #ZF manual gearbox, UUC twin-disc flywheel/clutch kit, #UUC steel clutch line, Rally Road clutch pivot pin, #UUC-EVO3 short shifter with double shear selector rod, #Vorshlag polyurethane transmission mounts

    CHASSIS 8.5x18” (front) and 9.5x18” (rear) #BBS-LM wheels with 235/40 (front) Hankook Ventus V12 Evo2 and 255/35 (rear) Toyo Proxes R888 tyres, BBS red centre caps, #BBS stud kit, #Bilstein-PSS9 coilovers, Vorshlag polyurethane engine mounts, #Dinan front and rear strut braces, #BMW OEM X-brace, #Brembo GT BBK with 355x32mm two-piece discs and four-piston calipers (front) and 328x28mm two-piece discs and two-piston calipers (rear), #Hawk HPS brake pads (front and rear)

    EXTERIOR Alpine white, ZKW HID projector headlights, ECS tuning European front clear corners, side markers and rear lights, Max Velocity RS front lip, Mateo Motorsports rear diffuser, UUC three-way adjustable carbon fibre spoiler

    INTERIOR Custom wrapped European three-spoke steering wheel, MT shift boots Alcantara gear lever and handbrake gaiters, Rally Road steering column dual gauge pod, LeatherZ centre gauge pod, Turbosmart Eboost2 boost controller/gauge, #Zeitronix ZR-2 wideband AFR, ECA-2 ethanol content analyser, ZR-2 boost and ZR-2 fuel pressure gauges

    Hard-pipe-mounted Tial blow-off vlave.
    Turbo is hidden away, only the air filter is visible in the engine bay.
    Interior home to various gauges plus Alcantara gear and hand brake gaiters.
    Gorgeous 18” BBS LMs and #Brembo-BBK .
    Up front, HID projector headlights with angel eyes.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    Double Dare

    Owning one street-and track-tuned M3 would be enough for most people. But not Chad Bates – he’s upped the ante with a matching pair. Words: Daniel Bevis. Photos: Peter Wu.

    DOUBLE IMPACT

    Fierce E92 M3 and F80 M3 tear up the Tarmac / Stunning twin M3s

    The two cars you’re looking at here – the E92 M3, and the F80 M3 – may be just a single generation apart, but they couldn’t be more different. The E92 features a thudding Goliath of an engine, a brutal, highrevving V8 with a soundtrack that can strip paint off cheap houses. It is (relatively speaking) an old-skool bruiser.

    The F80, conversely, is a smart representation of modern technological advances; a focus on combining performance with efficiency – plus the everpresent emissions Sword of Damocles – has seen to it that the motor is now a twin-turbo straight-six. Furthermore, this generation finally broke the M3 chain, hitherto being a badge glued to the two- and four-door variants: whereas the E92 M3 we have here is a coupé, the F80 is a four-door saloon. If you want a two-door coupé version of the F80, you will find yourself with an M4. Which is actually an F82. Such is progress, such is life.

    They are, of course, tied by an indelible bond, each an exciting chapter in the ongoing M3 saga, and their owner, Chad Bates, has artfully augmented these ties with tasteful upgrades to further accentuate their kinship: they both wear BBS wheels, they both roll on KW suspension, they’re both painted in subtle shades of grey. This measured approach is the result of a lifetime of modifying for Chad – although he admits that BMWs are, in the grand scheme of things, reasonably new territory for him.

    “I bought my first car, a 1984 Jeep Cherokee, at the age of 16,” he explains. “Ever since that point I have embarked upon making a personal statement with my cars.

    The Cherokee got stripped down and repainted, and received one of the most insane sound systems that money could buy. It was a fun little first car that got me around during my high school years! My second car was a heavily modified 1992 Honda Accord, which I kept for a couple of years before purchasing an Acura Integra GS-R – that, again, was heavily modified, although it got stolen and vandalised in 2002, and that left a horrible taste in my mouth.”

    Disheartened by this turn of events, Chad just didn’t feel his place in the modifying scene any more, so he pulled the ’chute and drifted out of it. Fast-forward to 2008 and he’d become a family man, so he acquired his first BMW – a shiny new 550i – to ferry the kids around in. It was wellequipped and had a bit of get-up-and-go, but he never felt any desire to modify it. But then, in 2011, the lease expired and Chad found himself yearning for something more… offbeat. And that’s when a voice in his brain reminded him what sparked the interest in Bavarian machinery in the first place. “My initial interest in BMWs began in 1996, when a friend of mine bought an E36 M3 and began modifying it,” he reminisces.


    “At that time, there weren’t a lot of young people from my hometown who could afford that type of vehicle, let alone modify them. So the car quickly became a local legend.” Chad felt that it was the right time to grab a handful of that stardust for himself, so he did the decent thing and ordered himself a brand-new E92 M3.

    “It started as a Jerez black 2012 E92 that I E92 M3 planned to keep pretty much stock, but thanks to magazines, forums and friends, that desire to keep it stock quickly passed,” he laughs. “I began modifying just about everything that could be touched on the car, and spent quite a bit of time on the track. After about three years owning the car, however, it was beginning to show signs of wear from all the track abuse, and I decided to make a pretty dramatic change. So I stripped it down in my home garage…”


    Yep, you read that right. No mucking about here, it’s all hands-on. In fact, Chad’s proud to explain that he’s carried out as many of the mods as he was physically able to on both cars. But we’ll get to the F80 in due course. First, we have a stripped down E92 to deal with: “All the body panels were removed and the entire interior was gutted,” he continues. “I shipped the shell to the guys at Strassesport in Irwindale, CA, where they painted it in Audi Nardo grey – something I hadn’t seen on a BMW before. Once the paint was finished the guys allowed me to work in their shop putting the entire car back together with my own hands.”

    The finished product, as you can see, is pretty meaty: staggered BBS E88s, copious carbon fibre touches, Recaro Sportster CS seats – and the rear bumper’s pretty jazzy too. Built up by Strassesport, it has aftermarket diffusers and flares smoothed right in, appearing like an OEM factory piece to all but those who know what they’re looking at. Classy, huh?

    After a year, however, Chad got itchy feet. He was loving the street racer thrills of the E92, but he wanted to add to his collection. Something unusual, something different. And the answer came in the form of, er, another grey M3.

    “A unique 2015 F80 M3 came up for sale,” he grins. “It had been ordered from BMW Individual and no expense was spared. It was the first of its kind to be painted in Fashion grey; a colour borrowed from Porsche. The interior was trimmed in contrasting Fjord blue and Silverstone leather. It was probably the most expensive M3 built at the time, with just about every option – and of course all the extra individual costs associated with the paint and interior. I knew that if I was going to purchase the new F8x model, the car had to be something special, and I knew that this car would fit the bill.” And, naturally, with those old modifying urges now firmly in overdrive, this was never going to be a case of simply finding a wellspec’d car and keeping it standard. Just like with that schoolboy Cherokee, Chad needed to make his personal statement.

    Like the E92, the engine’s had its management breathed upon, while the exhaust has been replaced with something that allows the brutal motor to bark with more ferocity. KW coilovers offer a neat balance between track prowess and streetable durability, and a handful of carbon-fibre exterior mods really set off that Fashion Grey hue in style.

    “Both of these cars were purchased to be promotional tools for my business, MotorRennGruppe, a manufacturer of titanium wheel hardware,” he explains, and that’s the logic informing the look-at-me wheels on both cars. The E92 wears 18” BBS E88s in staggered widths, while the F80 has a set of genuinely mighty custom-built BBS LMs, the rears measuring an eye-watering and arch-busting 12x20”. Just check out those Michelins, they’re a 305-section at the rear. That’s supercar wide!

    “For all my cars, I prefer very aggressive wheel setups that push the limits of the stock arches without making the cars look out of place or hacked up,” says Chad. “The E92’s E88s were rebuilt with new inner and outer barrels to widen the fronts to 10” and the rears to 11.5”, with offsets that brought the faces of the wheel nearly even with the arch lips. Then I knew I had to do something special with the F80, so I had a set of stock BBS LMs rebuilt to 10” and 12” widths. To my knowledge, this was the first set of 20” LMs done for the F80 M3.”

    What particularly strikes us about Chad when he’s describing his modifying journey with this grey duo is that it’s all very considered and thoughtful; he’s not the type to rush in and overdo things. Perhaps it’s the background of getting his hands dirty and doing everything himself, but there’s not an iota of effort wasted here.

    Take the engine tuning, for example. It’s easy to go a bit mad with M3s, but it’s good to remember that they’re pretty formidable in stock form, and sometimes less is more. “Both cars maintain stock engine internals, and were treated with tunes and bolt-on accessories,” he points out. “The E92 has a Stage II tune from BPM Sport, while the F80 has the E-Flash Tuner from ESS. Both cars have uprated intake systems from Macht Schnell and Maximum PSI, and the F80 has BMS charge pipes bolted up to the stock turbos. The ESS tune on the F80 bumps up the power considerably over stock with race fuel, and is extremely capable on the track – although I prefer driving the E92 over the F80 for the raw sound of the V8!”

    Ah, the agony of choice, eh? But despite the obvious similarities between Chad’s two M3s, there’s a clear ideological split: the E92 has been built to be sporty and trackfriendly, while the swankier F80 is the luxurious daily driver that just happens to have Continent-crushing GT potential as well as track-slaying physical drama. Between them, they tick a lot of boxes.

    So where does he go from here? “Well, I’d like a Porsche GT3 next,” he tells us. Yeah, he says that… but with two entirely different M3s to choose from – one modern, sensible and cosseting, the other an old-skool badboy track monster – we suspect he’s going to have his hands pretty full for a while.

    “The F80 is capable on the track, but I prefer the E92 for the raw sound of the V8!”
    “The car had to be something special… I knew this would fit the bill”

    “For all my cars, I prefer very aggressive wheel setups”

    TECHNICAL DATA FILE #BMW-E92 / #BMW-M3 / #BMW-M3-E92 / #BMW / #BMW-3-Series-E92 /

    ENGINE AND TRANSMISSION 4.0-litre #V8 #S65B40 / #S65 / #BMW-S65 , #Macht-Schnell-Stage-2 intake, #BPM-Sport-Stage-2 tune, #Megan-Racing exhaust system, seven-speed #M-DCT gearbox.

    CHASSIS 10x18” (front) and 11.5x18” (rear) #BBS-E88 wheels with 255/35 (front) and 285/30 (rear) Michelin Pilot SuperSport tyres, #KW-Variant-3 coilovers, #StopTech Trophy big brake kit with six-piston callipers and 380x35mm discs (front) and four-piston callipers with 355x35mm discs (rear).

    EXTERIOR Audi Nardo grey paint, OEM Euro-spec front bumper, iND grilles, bonnet vents and side gills, Mode Carbon GTS V1 carbon fibre front lip and side skirts, BMW carbon fibre mirror caps (painted Nardo grey), custom-moulded BMW M Performance spoiler, custom-moulded rear bumper with integrated diffuser.

    INTERIOR Recaro Sportster CS seats, BMW Performance steering wheel, Pedal Haus pedals, heel plate and paddle shifters.

    TECHNICAL DATA FILE #BMW-F80 / #BMW-M3 / #BMW-M3-F80 / #BMW / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-F80 /

    ENGINE AND TRANSMISSION 3.0-litre straight-six twin-turbo #S55B30 / #S55 / #BMW-S55 , #ESS flash tune, #Eisenmann valved exhaust system, #BMS charge pipes, #Maximum-PSI charge intakes, seven-speed #M-DCT gearbox.

    CHASSIS 10x20” (front) and 12x20” (rear) custombuilt #BBS-LM wheels with 245/35 (front) and 305/30 (rear) Michelin Pilot Sport tyres, #KW-HAS coilovers, M carbonceramic brakes, #MRG titanium stud conversion.

    EXTERIOR Individual Fashion grey paint, Mode Carbon carbon-fibre Trophy S1 front lip, rear diffuser and M4-style rear spoiler, iND cosmetic package, modified M4 #BMW-M-Performance side skirts.

    INTERIOR Individual Fjord blue and Silverstone extended leather interior with contrasting stitching, BMW M Performance steering wheel, factory carbon fibre interior trim, head-up display, Mode Carbon carbon fibre seat-back replacements (front and rear), P3 Cars digital boost gauge, Pedal Haus pedals, heel plate, and paddle shifters.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    / #BMW-E46 / #BMW-320d / #BMW-3-Series / #BMW-3-Series-Coupe / #BMW-3-Series-Coupe-E46 / #BMW-3-Series-E46 / #BMW-320Cd / #BMW-320Cd-E46 / #Aran-Ubhi E46 320d

    Here we have an exceedingly mean-looking E46 in the shape of Aran’s 320d which has enjoyed some extensive mods since he got his hands on it. On the outside the bonnet has been smoothed, the front bumper has been beefed-up with the addition of a #Pro-Sport lip spoiler, and electric folding mirrors have been fitted. The arches have been rolled to accommodate the genuine 18” #BBS-LM s, with red band stripes and red centre caps, and the car has been given a serious 60mm drop via a set of custom ERS Tender springs. In addition to the lowering springs Aran has added a custom anti-roll bar kit, Eibach top mounts and #Eibach rear arms. Finally, the ski hatch has been removed so that a custom sub enclosure could be fitted.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    IRISH CHARM

    Exceedingly clean and exceptionally well-modified, this supercharged BMW 325Ci E46 on BBS LMs is doing it right. Modifying is one thing, but bringing a car to a better than factory standard is something else; Darren Fennelly’s supercharged E46 proves beauty is more than skin deep. Words: Ben Koflach // Photos: Drive-My.


    This Irish E46 started life as a standard silver 323Ci but in less than a year owner Darren Fennelly transformed it into one of the most extensively workedover E46s out there.

    This wasn’t a cheque book build either. Oh no, much of the work was done by Darren and his close friends. “The build took nine months and nearly killed me and my friends,” Darren explains. “It’s one of the biggest things I have done in my life, but definitely one of the best and most enjoyable, even with all the late nights and hardships along the way.”

    So where do we begin? Well, first things first, it’s clearly no longer silver. The 323’s change to its glorious white hue wasn’t a quick and easy one, either. Darren wanted a really thorough spray over and so the 2.5- litre M52TU, along with its five-cog gearbox, was hauled out of the engine bay, thus giving the painter an easier job when it came to making sure the paint coverage was as complete as possible.


    The engine wasn’t simply put to one side, mind you. Darren had been speaking with Simpson Motorsport in England about getting more ponies out of it. “Simpson put me in touch with European Supercharger Systems (ESS) in Norway, from whom I bought the supercharger brand-new,” he says. “A genius friend of mine and myself installed it in around five hours without any real problems.”

    It’s an impressive bit of kit that uses a twin-screw compressor rather than the more traditionally used centrifugal configuration. Twin-screw superchargers have been used by American hot rods and drag racers for decades and this method really suits Darren’s E46 as it provides more low down torque; peak boost is delivered from around 2200rpm – perfect for his daily driver.

    Using a custom ESS-spec Lysholm 1.6-litre blower and an aluminium-alloy intake manifold, the ESS Stage 1 kit provides some healthy power figures. Larger Bosch injectors, CNC mounting brackets, additional idler pulleys and a heavy-duty drive belt all come as part of the kit, too, and it all works together to provide 7psi of boost along with quick throttle response.

    Although the ESS system is designed to fit with the factory air box, Darren has swapped that out for a Powertec cone filter and once the engine was back in the car, also fitted a manifold-back Supersprint exhaust system. “ESS claimed the supercharger would add another 110bhp and after mapping at Simpson Motorsport it put down 276bhp,” Darren reveals. “It is fast, not M3 fast, but not a million miles off either. The acceleration is very clean and it pulls real nice with the supercharger. And there’s a nice little whistle too, just enough so that you know it’s got a little something extra hidden away!”

    Before the engine was put back in, mind you, Darren cleaned it right up, and did the same with the gearbox, while also renewing the oil filter, rocker cover gasket, spark plugs, belt tensioner and sub-engine protection unit, as well as the clutch.

    Various components, from the washer bottle top to the ECU cover were then painted gloss black, and that’s before we even get to the carbon fibre that’s been added. Darren really has been thorough and the result is a truly stunning-looking engine bay.


    Coming back to the body, you’ll probably have spotted that the colour isn’t the only thing that changed. Darren also purchased a #Reiger M3-style front bumper and side skirts, as well as an M Tech rear bumper which he modified to sit level with the Reiger bits – a subtle touch that makes a world of difference. A CSL-style addition to the bootlid looks spot-on, as do the partsmoked LED rear tail-lights and smoked indicators all-round. More carbon fibre additions come in the form of a rear diffuser and kidney grilles, while a similar level of attention to detail has gone in to the exterior as the engine.


    Every clip, bracket, mount or fastener has been replaced with items from the dealer, as have many other items of trim, including the under arch liners and also the brake lines. The underside was also extensively cleaned and repainted. “We started off with a simple plan but got carried away!” laughs Darren.

    You name it, it’s been either replaced, renewed or repainted. The entire rear subframe was dropped out of the car, for example, enabling it and the area from which it was removed to be lovingly rubbed down and repainted. All the bushes were replaced, including the four subframe bushes, and Turner Motorsport limiters were fitted to the rear trailing arm bush carriers. The springs and shocks were binned in favour of #KW Variant 2 coilovers, offering Darren the adjustability he was after without being a harsh full-on race setup.

    With the extra power under the bonnet, you won’t be surprised to hear that the brakes have seen quite a substantial upgrade. Up front, 330mm grooved discs are clamped by AP Racing four-pot calipers, while the standard rear discs have been renewed and are accompanied by M3 calipers, which have had new pads fitted and been painted red to match the APs. Feeding these with the necessary fluid they need to operate is a set of braided hoses. The rolling stock is one of those additions that just seem to make this car, and rightly so. Many E46s sport replica BBS LMs, and in some ways we can understand why – they look good and go well with the E46 shape.


    However, any kind of replica wheel just wasn’t going to cut it for Darren’s project, and he managed to source a set of genuine staggered 19” LMs. Darren wanted them to be absolutely perfect, so they were sent to Nu-Luk Wheels in Carrickfergus. Every single nut and bolt was removed, with the dishes, barrels and faces coming apart for attention. The dishes were stripped of the lacquer they’d previously worn by a machine lathe, following which they were polished to an extremely high standard. The centres were then taken right back before being powdercoated gold, lacquered and built back up.

    Measuring 8.5” wide up front and a chunky 10” out back, the wheels not only look the business but mean that Darren is able to get a much bigger rubber footprint down for more grip at both ends. To that end, he’s fitted grippy 235/35 front and 265/30 rear Goodyear Eagle F1 tyres, which look absolutely perfect.

    Our final stop on our tour of Darren’s E46 is the interior – and what an interior it is. Much like the rest of the project, Darren’s approach is far from shy. The whole lot was essentially gutted, making things a little easier for the retrimmers, who were tasked with covering the lot in sumptuous red Nappa leather – not before Darren had added an OEM black carpet in place of the original grey one, mind you. The parcel shelf was also given a covering of black alcantara, while much of the plastic trim was replaced with black parts from the OEM catalogue, or repainted black. OEM mats and a selection of M goodies almost complete the spec, and it’s worth noting that Darren also renewed every single nut, bolt, washer, clip and bracket in the process. The cherry on the top of the awesome interior is the dash, which has been flocked for a motorsport feel and has benefited from a trio of gauges monitoring the boost, oil pressure and voltage. The factory dials have also been changed to white to match this trio, which is a neat touch.

    Truly unrecognisable as an early E46, Darren’s 323Ci is a real stunner. So thorough is his reworking that his Three looks and feels like something that’s just left the factory. Attention to detail like this is not seen often – no stone has been left unturned, and we’d happily go as far as saying it’s one of the best E46s in Ireland – or at least from what we’ve seen. Considering the enormous makeover the car’s had, to do it all in just nine months is amazing and just goes to show that you can do whatever you like with a bit of help from your friends.

    DATA FILE #BMW-323Ci-E46 / #BMW-323Ci / #BMW-E46 / #BMW / #BMW-323Ci-Supercharged-E46 / #BMW-323Ci-Supercharged / #M52/ #BMW-M52 / #M52-Supercharged / #BMW-3-Series-Coupe / #BMW-3-Series / #BMW-3-Series-E46 / #BMW-3-Series-Coupe-E46 / #ESS / #BMW-325Ci / #BMW-325Ci-E46 / #BBS-LM / #BBS /

    ENGINE & TRANSMISSION: 2.5-litre straight-six #M52TUB25 , #ESS-TS1 supercharger kit including inlet manifold and larger injectors, #Powertec air filter with custom heat shield and air intake hose, #Supersprint manifold-back exhaust system, ECU remap by #Simpson-Motorsport , carbon fibre rocker cover and fuel rail cover, custom ESS decal for rocker cover, chrome oil filler cap, new OEM: fuel filter, oil filter, rocker cover gasket, spark plugs, belt tensioner, sub-engine protection unit. Black painted: front air intake unit, ECU cover, expansion tank cover, battery unit box and more. Standard five-speed manual gearbox, ST1 short shifter, new OEM: clutch, flex disc, gearbox mounts.


    CHASSIS: 8.5x19” (front) and 10x19” (rear) #BBS LMs fully rebuilt with powdercoated gold centres and polished dishes, shod in 235/35 and 265/30 Goodyear Eagle F1 tyres respectively. #KW-Variant-2 coilovers, new OEM: wishbones, bushes, track rod ends and all nuts, bolts and washers. #Turner-Motorsport RTAB limiter kit fitted, all components cleaned and repainted including underside of shell, new jacking rubbers. #AP-Racing front brake kit using four-pot calipers and 330mm grooved discs, new OEM rear discs and M3 calipers painted red, new brake lines with braided flexi-hoses, new OEM handbrake shoes, Ferodo brake fluid.


    EXTERIOR: Full respray in white with a black roof, #Reiger M3-style front bumper and side skirts, Reiger front splitter, CSL-style rear spoiler, customised M Sport rear bumper, carbon fibre kidney grilles, carbon fibre diffuser, carbon fibre badges, smoked front and side indicators, LED rear light units with smoked indicators and reverse lights, new OEM foglights and surrounding M-tech mouldings, new OEM arch liners, new OEM brackets and clips throughout, new factory stickers throughout.

    INTERIOR: Full retrim in red Nappa leather, parcel shelf retrimmed in black alcantara, full black OEM carpet, most of remaining trim replaced with new black components or new grey components sprayed black, ST1 footrest and pedals, new OEM door and boot rubbers, M Sport gear knob and handbrake handle, new OEM floor mats, flocked dashboard, custom gauge pod (also flocked) holding Stuart Warner 52mm boost, oil pressure and volt gauges, white Lockwood dials, new OEM speakers all-round
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation

    AMERICAN AT HEART
    A supercharged #LS1 has created a monster of an E36. Whilst many E36 owners might dream of M3 straight-six or M5 V8 conversions, Ian Sutton has gone down a whole different route by fitting a supercharged LS1 V8… Words: Ben Koflach. Photos: Gary Hawkins.

    Engine options on the E36 from the factory were fairly plentiful – from the 102bhp 1.6-litre M40 to the 321bhp 3.2-litre S50 M3 Evo powerplant, BMW had it pretty well covered. But for some people – especially once you start talking modified car owners – too much is never enough, and we’re seeing E46 M3 straight-six, E39 M5 V8 and even some E60 M5 V10 conversions taking place more and more often. But while Bavarian horsepower is all well and good, why not think out of the box?

    The General Motors LS-series of engines, or #Crate-V8 s as they’re often known, are a common choice for those wanting a simple, effective and proven way of reliable horsepower. There’s simply no denying it – there’s no replacement for displacement – and these engines are being seen fitted to all manner of cars, from Corvettes to Camaros, trucks to 4x4s, and (most importantly in this story) even the Holden Monaro, otherwise sold as the Vauxhall Monaro and Pontiac GTO. Far from the small block Chevrolet V8 many people seem to mix it up with, most LS engines have an all-aluminium construction, fuel injection, and are generally a far more modern proposal than you might think. And considering their displacement, they’re pretty compact units too.


    Rewind just over five years, and you’d find BMW technician Ian Sutton thinking just the same – why doesn’t someone put the well-proven LS engine into an E36? He had the first part of the recipe, an E36 328i Sport, already, which he’d bought when he finished his apprenticeship at Coventry BMW and used for a couple of years before the Yank engine idea came up. Ian is also lucky enough to have a good friend who specialises in breaking the aforementioned Holden/Vauxhall Monaro, so you can see where the inspiration came from.

    Ian’s engine of choice was the 5.7-litre LS1 from early Monaros, his in fact coming from the US-spec Pontiac GTO. And once it was in his hands it was time to get to work.

    Not wanting to risk damaging his 328i in the process, he bought another one from work to use as a test shell for all the fabrication that would be involved. It was separated from its engine and the bay removed of all its clutter. Ian makes it sound so simple, but the next step was to hoist the GM V8 into the position he wanted it to sit and then fabricate mounts on the E36’s crossmember to suit – albeit after a bit of sump alteration to get it to fit behind the crossmember. At the same time it seemed the perfect opportunity to baffle it to avoid oil starvation during hard cornering. With the sump being off at that time, Ian decided to replace the standard con rod bolts with ARP items for added strength and durability.

    With that done and the engine positioning perfected, the gearbox mounts could be fabricated, and stage one of the build was complete. Of course, the engine and gearbox weren’t hooked up to anything other than each other, but at least they were positioned in the car.

    A full M3 Evo rear axle was to be used, so as with any engine transplant of this kind, a custom propshaft had to be manufactured first. Custom gear linkage was also created so that the gearstick could remain in the original position in the cockpit while governing the Tremec T56 six-speed gearbox from the Pontiac. Not content with leaving it standard though, Ian fitted a lightweight Spec aluminium flywheel, LS7 clutch, XRP braided clutch line and a GMM Ripshifter for faster revving and shifting.

    Around the same time, Ian’s Monarobreaking friend was over in Australia and had got talking to Scotty at Capa Superchargers, which is well known Down Under for offering forced induction for many different cars, including the Holden Monaro. It didn’t take long for Ian to be convinced, and before he knew it, the Vortech-based ’charger kit was sitting on his doorstep.

    Adding a whole new dimension to the build, it was soon discovered that the supercharger simply wasn’t going to fit the E36’s relatively narrow engine bay – not with the standard supercharger bracket anyway. With the help of good friend Gary, and with Ian having been part-trained as an engineer before becoming a mechanic, a plan was made, and the pair got straight on with measuring up the engine and bay (a painstaking process in itself, making sure all the pulleys lined up absolutely perfectly), then designing thier own bracketry for a variety of the components and having a local engineer construct it from billet aluminium. To keep the whole lot cool, Ian had Allisport fabricate the radiator, intercooler and oil cooler to his specifications, which all sit just behind the front bumper.

    The exhaust was yet another challenge, as not only did it need to take the gases from the V8 as efficiently as possible, it was a pretty tight squeeze between the E36’s chassis legs, too. The only solution was to go custom, and Wye Valley Garage – where the project spent much of its time – was able to help. A fully TIG-welded stainless steel exhaust system from the manifolds to the tailpipes is the result of their hard work, and we have to say it looks absolutely perfect, and the silencers are repackable too. Finishing off the installation itself is an almost headache-inducingly well planned combination of parts. From the custom power steering fluid tank (with a #BMW cap mind you), to the E46 M3 header tank, OEM (but not necessarily 328i, in case you start thinking this is the easy bit) hoses that can be found all around the engine bay, to the XRP aeroquip fuel and oil lines used throughout, it doesn’t lack in attention to detail. Such was Ian’s quest to make it all look as factory as possible, he’s even used OEM BMW hose clips rather than Jubilees! When the time came to move the engine, gearbox, supercharger, exhaust, crossmember and gearbox mounts over to his prized E36 – he wasn’t going to do it by halves either.

    They say a picture tells a thousand words, but let me tell you, even a thousand pictures couldn’t tell the story of just how immaculate this E36 is; Ian has rebuilt it bolt-for-bolt, using new components throughout, and powdercoating every part he could. You name it, it’s been uprated, replaced, or painted. The M3 Evo rear subframe and axle, M3 Evo front wishbones and hubs and brakes all-round, all new bushes, balljoints, links, Bilstein PSS9 coilovers, Eibach anti-roll bars… the list goes on. And it’s not just the underside that’s better than new, the bodywork is too, thanks to a bare metal respray. It really is astonishing, and it perhaps is only justified by seeing it in the metal.

    Fuelling and management was dealt with surprisingly simply – being an engine so popular for transplants, especially over the Pond, management solutions are very well catered for. First, the ECU was sent over to Capa to be unlocked, having all of its security limitations taken off and being given a base map on HP Tuners software. To match the airflow that the supercharger was bringing to the table, a Walbro fuel pump rated to 255 litres per hour pushes the fuel through a Fuel Lab filter and adjustable fuel pressure regulator, before being flung into the engine by 42lb injectors. It’s certainly a promising sounding combination.

    Rolling stock duties are put to #BBS LM replicas – Ian had originally wanted black centres with a polished lip, but there were differences between the 8.5”- and 9.5”-wide variants, so he went for all black rims with a subtle red line around the edges, and measuring 19” in diameter. The rest of the styling is a very much OEM affair, with a combination of M3 GT components, AC Schnitzer mirrors and subtle rebadging; the front and rear roundels having been swapped for carbon items, while the side rub strip badges – which Ian had custom-made by a local signwriter – now read supercharged.

    One of the final steps was the interior, which Ian wanted kept as stock as possible. Again, nothing but the best would do, so perfect black leather and as little clue as possible as to what engine lies beneath. M3 gauges are cleverly hooked up to work with the new engine, made possible by the HP Tuners software, and to keep a really close eye on what’s going on underneath the bonnet, Ian’s installed a trio of Autometer gauges in the centre console, monitoring oil pressure, fuel pressure and boost. Not only are they installed neatly, but Ian took a long time researching to find a range of gauges that matched the factory orange lighting so as not to look out of place – his attention to detail really is mind-blowing.


    The car made it’s debut at Santa Pod last year with great success, and on the strip it managed a 12.7 quarter-mile at 110mph – impressive, especially considering it was on a base map, and Ian was taking it easy. Of course he was keen to have it fully mapped to see what it could do, though, and John Sleath Racing was put in charge of the mapping, and the results were mightily impressive. A peak of 530.4bhp is only half the story – 550lb ft of torque is the kind of figure hardly any tuned BMW engine can boast, and especially not delivered in the same effortless way as the ’charged LS1, making it the ideal road car.

    While the engine may not be a traditional choice for an E36, Ian’s more than proved it’s a good one. With power and torque in abundance, as well as an incredible V8 soundtrack, an overall feel of OEM quality (and then some!) and increased driveability and performance, he’s really shown that it doesn’t have to be a BMW engine to feel original. So the purists may hate it, but there’s no denying that it’s incredible. If for some reason BMW had made its own LS1- powered E36, I can’t help but think it would struggle to beat the perfection that Ian has struck upon. Thinking out of the box? Pah, he’s blown it to bits.

    DATA FILE #Vortech / #BMW-E36 / #BMW-328i / #BMW-328i-E36 / #BMW-328Ci / #BMW-328Ci-E36 / #BMW-E36-Coupe / #BMW-3-Series / #BMW-3-Series-E36 / #BMW-3-Series-Coupe / #BMW-E36-V8 / #BMW-E36-LS1 / #BMW-E36-GM-LS1 / #GM / #BMW / #Tremec /

    ENGINE: 5.7-litre #V8 #GM-LS1 / , #Vortech-V2 supercharger, #ARP con rod bolts, custom #ZF-PAS pump and mounting bracket, custom billet aluminium supercharger bracket and auto tensioner, custom baffled oil pan, #Earls-Performance oil thermostat, #Allisport custom front mount oil cooler, radiator, PAS tank with #BMW cap, front mount intercooler and pipework and oil catch tank, E46 M3 header tank, #Vortech-Maxiflow blow-off valve, 42lb injectors, #Walbro 255l/h fuel pump, #Fuel-Lab fuel filter and adjustable fuel pressure regulator, #XRP-Aeroquip fuel and oil lines, custom front cross member and engine mounts, custom fully TIG-welded exhaust including manifolds and repackable silencers, custom engine wiring harness, GM ECU with 2bar map and fully remappable HP Tuners software

    TRANSMISSION: #Tremec-T56 six-speed gearbox, custom gearbox mounts, Spec lightweight aluminium flywheel, LS7 clutch, custom propshaft, #XRP clutch lines and remote bleeder, #GMM-Ripshifter with custom gear lever, full E36 M3 Evo rear axle

    CHASSIS: 8.5x19” (front) and 9.5x19” (rear) #BBS-LM replicas shod in 225/40 and 265/30 Falken FK452s respectively. Bilstein PSS9 coilovers, #Eibach anti-roll bars, M3 Evo front wishbones and hubs, AC Schnitzer carbon front strut brace, custom lower strut brace, Z3 M quick steering rack; full nut and bolt rebuild including all new bushes, balljoints and links with all new components powdercoated. E36 M3 Evo brakes all-round (315mm discs front, 312mm discs rear) with Performance Friction pads all-round and XRP braided lines

    EXTERIOR: Full bare metal respray in original Arctic silver, face-lift nose cone, M3 Evo front splitter, M3 GT corner splitters and M3 bumper mesh, M3 GT two-piece rear spoiler, AC Schnitzer mirrors, carbon fibre front and rear roundels, supercharged badges in rubstrips

    INTERIOR: OEM full black leather interior, #AC-Schnitzer short shift gear knob, E36 M3 clocks with oil temperature gauge, #Autometer boost, fuel pressure and oil pressure gauges, Alpine CDA 105 RI head unit

    THANKS: www.wyevalleygarage.co.uk for the exhaust, fabrication, workspace and storage (01989 565001), www.lsxv8.co.uk for LS spares and conversions, Allisport (01452 751187), Scotty at Capa Superchargers (006 1885 823499), John Sleath Racing for the mapping (07976 751742), Nic J Racing (07970 192715), Gaz, Slim and Zip, Sytner BMW Birmingham Parts Department

    Ian and the friends that have helped him make it look easy – modifying and baffling the sump and fabricating engine mounts, the exhaust and the supercharger bracket as well as many other parts. There’s also the tuning itself to consider, with the lightened flywheel and other uprated transmission components,
    the supercharger and intercooler, and of course all the pipework and hoses, which all look OEM. A dimple had to be made in the inner wing to fit the ’charger too.

    Combine that with practically rebuilding the entire car with everything renewed and powdercoated, and you can see what makes the car quite so amazing.

    Other than the noise, the average passenger wouldn’t know the difference.
    Unshakeable power – 5.7 supercharged American litres worth of it in fact – oof!
    There’s simply no denying it – there’s no replacement for displacement.
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    EASTERN PROMISE Japanese wide-body Z8

    THE BODY BEAUTIFUL

    Japan loves BMWs and isn’t afraid to do things a bit differently when it comes to modifying them, like turning a Z8 into a wide-body masterpiece, for example… Considering less than 6000 Z8s were ever made, would you have the confidence to chop one up? Fortunately for us Yasuaki ‘Bob’ Suzuki did, thus creating something rather special… Words and photos: Chris Nicholls.

    Modifying a low-volume car is always a scary proposition. After all, if you mess it up it’s not like you can simply go to online and find replacement parts easily. It may take weeks, months or even years to source the right components and restore things to their former glory. Such is the case with the Z8, as only 5703 were produced over its four-year life span. Okay, it may not be an E46 GTR but it’s still a low-volume car by most people’s standards. It’s also arguably among the most beautiful BMWs ever made. With its flowing compound curves and classic roadster proportions, the Henrik Fisker-designed exterior is a future classic. Which makes it all the more nerve-wracking to think about altering those lines.

    Thankfully, the confidence and skill to do that is not something Yasuaki ‘Bob’ Suzuki has ever really lacked. The founder of Japan’s largest BMW tuning chain – Studie AG – and creator of a string of high-profile cars that act as both his personal vehicles and demo cars for his business, Suzuki-san has seemingly never had an issue altering cars (some in quite extreme ways) to suit his needs.

    Take, for example, the cars Suzuki-san built after selling the Z8 to its current owner. First there was a bright blue E87 130i complete with factory Motorsport wide-body kit. Then there was a neon pink wide-body E46 M3. Then a bright green Z4 M Coupé with another genuine Motorsport wide-body kit. Currently, Suzuki-san drives a bright orange i8, with a matching i3 for city duties and while they’re not wide-body cars, there’s no guarantee it’s off the cards.

    So it’s clear, Suzuki-san likes the wide-body look; in fact, you could say he really, really likes them. However, the issue with making one of the world’s only wide-body Z8s was that, unlike Suzuki-san’s future creations, there wasn’t a factory kit available to do so. This meant that he and his team had to make it themselves.

    They started by designing a kit that would add width but look factory. After all, while Suzuki-san clearly has a penchant for loud colours, judging by his later cars, the body panels themselves were almost always OEM. That level of integration was the goal. Next, they made the one-off moulds, then laid up all the fibreglass and painted it white.

    It’s hard to argue with the results. Those guards draw your eye initially, of course, adding real muscularity to the Z8’s clean lines. Next, your gaze is drawn down to the flowing side skirts and towards the widened and tweaked front and rear bumpers, complete with aero additions. If you linger long enough you might also notice the stock bonnet has gained some added raciness via custom vents.

    The design’s crowning achievement, though, is that level of seamlessness. If you had never seen a Z8 before, you’d never think it wasn’t factory. Yes, the 19” BBS LMs, Brembo six-pots up front (four-pots out the back) and lowered stance on one-off Studie coilovers are a dead giveaway the car’s been tuned but the unsuspecting might only think Suzuki-san had dropped it and added some extra grip and braking. The kit is that natural.

    Inside, though, things are a little less discrete. The red leather trim is all stock, but the custom-trimmed Recaro SPG buckets certainly aren’t. Neither are the Atiwe wheel and Schnitzer shift knob. And that completely unique silver carbon dash trim? Yeah, that’s pretty obvious, too. It also highlights a specific need for navigational assistance when driving in Tokyo – something the Z8 never came with from the factory. Again demonstrating the skill and care with which the car was built, though, the Pioneer Carrozzeria headunit looks stock. If the dash was the regular silver plastic, the average Joe would probably think it had been installed in Munich prior to Suzuki-san’s purchase.


    Under the bonnet we see a return to the exterior’s integrated theme. The S62 V8 never lacked power but the Okada Projects Plasma Ground secondary spark enhancer and Plasma Direct coils ensure the driver gets the most out of the air/fuel mix, while also remaining invisible to the casual observer. The near factory-looking AFE intake kit and well-hidden Hamann exhaust manifolds, which eventually connect to a one-off Studie silencer, ensure the engine now breathes a little easier and makes a much nicer noise, too. There’s the mandatory performance car bark at start-up and a well-controlled rumble at idle, followed by a lovely smooth roar as the revs rise. It reminds you there’s a reason why so many small performance car makers have used this engine over the years.

    Essentially, looking at the car as a whole, it’s clear that what Suzuki-san and the Studie team have done is to take everything that made the Z8 great and made it better. That’s some skill.

    Sadly, though, in space-poor Japan, Suzuki-san had to sell the Z8 in 2005 in order to move onto his aforementioned later projects, so this is where current owner Kohama-san comes in.

    Kohama-san initially got into the scene after being taken to watch street drag racing many years back, when these things were still a relatively common sight on Japanese roads. He decided then and there that he wanted to drive fast cars. Initially, he started out with classic JDM metal, like an SA22C RX-7 (which apparently burnt to the ground after an engine fire on the Wangan post-sale) and a 3.1 litre ‘full-tune’ L28-engined S130 Z, but soon moved onto BMWs. “They’re just really well-balanced, well-rounded cars,” he says.

    Despite his sports car roots, Kohama-san’s first BMW was actually rather sedate, even if it didn’t stay that way for long. An E39 530i Touring, he modified it so it sported Alpina suspension, a Supersprint silencer, #BBS RGRs and M5 body parts. After that came an E61 530i Touring, this time with ACS body parts, ARC suspension, Arqray muffler, 20-inch BBS LM-R wheels and enormous eight-pot Brembos. He did head back to his sports car roots eventually, though, with a Z3 and E85 Z4, both modified with Bilstein suspension, Recaro seats, Schnitzer aero etc. before shifting back again to practicality with his current ACS F31 320i Touring.


    All this BMW history meant he spent a lot of time at Studie’s Tokyo HQ, and not just as a customer. Like many of Studie’s clients, Kohama-san spends a lot of spare time there just hanging out and chatting with the staff (when they’re not busy with other work), as Studie stores tend to be more like car culture centres rather than just dreary retail and tuning outlets. Because of all this time spent at Studie, Kohama-san was among the first to know that Suzuki-san was selling his pride and joy. And as soon as he heard about it, he was off to the bank. “It was love at first sight,” he says.

    Even better, the car’s timeless beauty and evocative driving experience means he falls “more in love with it every passing year”. “My favourite thing about the car is how exhilarating it feels when you drive it,” Kohama-san says. “It blows away the cobwebs so, of course, I drive it whenever I can.” That means the Z8 is more of a daily driver than a garage queen. Cruising through the city or blasting up mountain roads, this is one #Z8 that gets used. In a world where more and more high-end sports cars are squirreled away for investment rather than enjoyment, it’s refreshing to hear.

    Further proving just how special this Z8 is, it’s worth noting that out of all his other BMWs we mentioned earlier this is the only one Kohama-san has held onto over the last ten years. Of course, it’s easily the most unique and rare, but uniqueness and starvalue haven’t stopped others around the world from selling amazing cars after only short periods of time, so it suggests there really is something special about this particular car.


    Sadly, not everyone seems to agree, though, as the one negative experience Kohama-san has had over his ten-year ownership period is that the paint ended up being deliberately damaged by some low-life a few years back. Thankfully, Kohama-san got it fixed and, as mentioned, isn’t any more cautious about driving it. He has, however, “become obsessed with applying protective coatings to it” ever since. Of course, this unfortunate event does suggest the ‘lucky’ numberplates Kohama-san has on there (which have been blanked out for privacy purposes), and that he religiously puts on every car he owns can’t protect him from all calamities; but then, what can?

    As for the future, the car is now 15 years old so some parts are due for replacement. Specifically, Kohama-san is thinking about refreshing the suspension components, although given the car runs custom coilovers right now, finding off-the-shelf replacements might be difficult. He might just have to go back to Studie Tokyo and ask the helpful staff there if they can make him some new ones. No doubt they’d be happy to oblige, especially as it will mean keeping this unique stunner on the roads for a few more years.

    DATA FILE #Studie-AG wide-body #BMW-Z8 / #BMW-Z8-E52 / #BMW-E52 / #BMW-Z8-Studie-AG / #BBS-LM / #Getrag / #BBS /

    ENGINE AND TRANSMISSION 4.9-litre #V8 #S62B50 / #S62 / #BMW-S62 / #BMW / , #AFE intake kit, #Hamann exhaust manifolds, Studie one-off silencer, #Okada-Projects-Plasma-Ground secondary spark enhancer, #Okada Projects Plasma Direct coils. Stock #Getrag-420G six-speed manual, short-shift kit.

    CHASSIS 9.5x19” (front) and 11x19” (rear) #BBS LM wheels with 255/35 (front) and 305/30 (rear) Continental ContiSportContact 5P tyres, Studie custom coilovers front and rear with Studie custom springs, Brembo six-piston brake calipers (front), Brembo fourpiston calipers (rear), two-piece #Brembo discs front and rear.

    EXTERIOR Studie one-off wide-body front and rear arches, wide-body side skirts, front and rear bumpers with front splitter and rear diffuser, bonnet ducts in stock bonnet

    INTERIOR Custom retrimmed #Recaro-SPG one-piece bucket seats, Atiwe steering wheel, OEM aluminium pedals, AC Schnitzer shift knob, #Studie one-off silver carbon interior trim panels, #Pioneer-Carrozzeria navigation headunit

    My favourite thing about the car is how exhilarating it feels when you drive it.
    • Z8s are rare enough but this Japanese custom wide-body beast is a true one-off. With its massively pumped-up arches, 19” BBS LMs and stunning interio Z8s are rare enough but this Japanese custom wide-body beast is a true one-off. With its massively pumped-up arches, 19” BBS LMs and stunning interior, it was an incredible machine.  More ...
    Stream item published successfully. Item will now be visible on your stream.
  • Post is under moderation
    LIVING THE DREAM #Audi

    Our Finnish photographer, Jape Tiitinen, creates some stunning images of cool Audis, but he also owns one – this immaculate, 592hp RS4…

    Finland has produced an extraordinary number of world class rally drivers. In fact, the list is seriously impressive when you consider the country is so diminutive. In no particular order, there’s Markuu Alen, Marcos Gronholm, Mikko Hirvonen, Jari-Matti Latvala, Timo Salonen, Ari Vatanen and WRC Champs Tomi Makinen and Juha Kankkunen. Then there’s the small matter of F1 World Champions Kimi Raikkonen and Mika Hakkinen. They must put something in the water in Finland to breed so many outstanding wheel men.

    But, when you think about it, growing up in the kind of hostile landscape that sees snow for half the year, it’s not surprising that so many Finns can pedal a bit. After all, if your daily commute involves icy stretches of road that require left foot braking and power slides to stay on the road, then you’ll quickly learn to become a bit tasty behind the wheel.

    But there’s more to it. These guys are passionate about cars and going fast, and Audis have always figured highly in the list of tuned machines. Now, Finland is a bloody long way to travel to see these quality cars. Fortunately, we have our own man on the scene, Jape Tiitinen (pronounced ‘Yapay’). His main job is taking awesome images of cool cars (as well as weddings and pretty much anything you want to pay him for – within reason!). But when he isn’t behind the camera, you’ll find him in his own, stunning Audi – a B5 RS4. Jape takes up the story...

    “I am quite a passionate Audi enthusiast. I bought my first quattro in 2004 and all my cars have been quattros ever since. The first one was B5 A4 1.8T. It got a total makeover and I sold it a year after. Next in line was a C5 A6 2.7 biturbo in 2005. This is where my OEM game kicked in; I bought an RS6 front bumper and sideskirts to make it look fresh. Eventually we replaced the turbos with B5 RS4 ones to make it faster. My hunger for power kept on growing, so I sold the A6 in 2007 and bought this B5 RS4 which was already tuned for 550hp – but the work was very poor. So I took it to my friend Mikko “Okkim” Välitalo who rebuilt the engine with stock internals to make it even faster than what the previous owner had done.” Jape ran it with this spec – a Supersprint cat back exhaust and a remap – for a couple of years, but the need for speed soon took hold of him.

    “The RNS-D navigation started to feel kinda old, so I bought an RNS-E unit from my friend’s A3. I also ordered a Kufatec digi TV tuner from Germany with OEM kit, which gives you an opportunity to use RNS-E original buttons to operate the TV,” he says. Very trick. “The brakes were upgraded to RS6 calipers with B7 RS4 discs in January 2009 when my front discs came to an end. “I ordered a pair of brand new RS6 turbos from Germany. Okkim did the labour and installed them. He also manufactured me his signature 3in downpipes from stainless steel.”

    With a fresh mapping session, the RS4 made a very healthy 592hp with 802Nm of torque. A 3.25in straight through exhaust is key to helping it breathe, while Wagner intercoolers keep the charge temps down, and there’s a methanol injection system to further cool things and aid reliability.

    With a fully rebuilt and reliable engine that made significant power, Jape could have been content to leave it at that. But our Finnish correspondent likes to drive his B5 hard, and in 2012 his engine blew. “Obviously even the RS can’t take super-hard driving for too long!” he laughs. “An exhaust valve snapped and went through a piston damaging the whole engine. It took a year and a half to get all the parts and build the engine to where it is today,” he shrugs. “This current set-up is still looking for the final touches in software from Richard Weir at Viper Tuning. I just love the fun that flatshift and launch control brings me with all the bang, bang.” Jape is a bit of a perfectionist, to say the least, so his own car had to be something extra special.

    “I’ve had lots of different wheels on my RS during the years. The latest, which are also my favourite, I bought from eBay – BBS LMs in 10 and 11x19in. I knew they would fit in the arches of the RS, so I bought them with no hesitation,” he laughs. “They needed a 30mm spacer at the front to clear those massive C5 RS6 calipers and 15mm at the rear to sit right,” he adds. Some may question the logic of staggered wheels on a quattro, but Jape is happy with the set-up and has experienced no adverse effects. The wheels really do make the car and it’s hard to find anything that offers the same classy looks, and motorsport pedigree of these sublime splits rims. “I am a true wheel whore,” confesses Jape, “there must have been at least 20 sets of different wheels on my RS. In my garage I have two sets of Audi OEM wheels in 9x19in and 9.5x20in and Rota Grid 9.5x18in for winter. The BBS LMs are my favourite wheel of all time.”

    When it came to the exterior, Jape was well aware that with a B5 less is definitely more. The wide arches and subtly aggressive front bumper, with vents, combine to give the avant a stealthy, but purposeful look. The factory colour is a very shiny and well maintained black, but Jape wanted decided to try it with a white wrap. “My brother-in-law, Eero, from Eteippi.fi wrapped it in 3M 1080 gloss white.” This high-quality vinyl wrap was very carefully applied and transformed the B5. It’s great to see something that’s not matt and the gloss really works with the lines of the car. In fact it was so effective, it left Jape with another problem.

    “After the car was wrapped my faded headlights started to look really old,” he smiles. “I found a right side light from a local Audi forum, but the left one was a bit harder to locate. Eventually I found one in Germany but the seller didn’t want to ship to Finland. Big thank you to Patrick Hille in Germany for taking care of this and shipping the missing light for me.”

    With a fresh wrap and sparkling new headlights, Jape had the grille surrounds plastidipped to de-chrome it. Then some very subtle touches were added such as the Polo rear wiper, SEAT Leon Cupra front splitter and some carbon mirrors. The overall effect is stunning – an immaculate white RS4, with some serious power to back it up. Inside this B5 was given a full refresh, including a set of Corbeau seats. A self confessed gadget freak, Jape has also fitted a Kufatec OEM+ TV tuner and upgraded the navigation unit from a newer A3. It really does give the B5 a contemporary feel.

    So what’s next for this stunning white B5? “This car has been with me for eight years now. For the first four years it was my daily ride. After I jumped into the RS6 turbo game, I had to get another car to be my daily. The RS needs so much care, it can’t be a daily any more!” Wise words – how many B5 RS4 owners are nodding sagely at this comment..?

    Since the photoshoot, the 3M wrap has been removed, but even this brought out the sense of fun in Jape. “We had Audi club Finland’s ice track day and I felt like doing something different. I thought that if I just peeled off some of the wrap and added some graphics and lights to the car, it’d look like a US police car, with my own funny twist. So I peeled off the wrap just leaving the doors, bonnet and the roof white. Eero at Eteippi.fi cut some stickers and voilà quattro Trooper was born! Now that’s one police car you’d struggle to outrun!

    With its stint as a police trooper at and end, Jape fully removed the wrap and the B5 is now back to its original and some might say best colour. “After I peeled off the wrap Antti Piri from Shineld came to my garage with his crew and polished the beast for 2 straight days.

    So there we have it. Our man in Finland is not only an ace lensman, and genuinely nice fella, he’s also a massive Audi tuning fan. Living the dream? You bet!

    CALL THE COPS

    Rather than simply remove the entire wrap, Jape thought it’d be fun to take some off some of the 3M gloss white vinyl to reveal the original black paint underneath. He then decided it’d be funny to create an RS4 police car, and project RS4 Trooper was born. A set of lights from eBay, some graphics and he was done. The car is running its winter wheels in this pic, some 18in Rota Grids (even his winter wheels are cool!).

    Far Left: The golden arches beckon! Above: The V6 biturbo powerhouse.

    Above: Corbeau RRS seats Right: Moody, ‘golden hour’ shot is stunning.

    Above: Upgraded navigation and Kufatec TV.

    “Even the RS can’t take super-hard driving for too long”

    Top: A vest in Finland? He must be nails! Above: It’s all about the details.

    SPECIFICATION #Audi-RS4-B5 / #Audi-RS4 / #Audi-A4-B5 / #Audi-A4

    ENGINE 2.7 V6 biturbo, RS6 turbochargers with #Fin-Turbo custom made billet wings, #Autospeed exhaust manifolds, Schrick stainless over size valves, 2.8L heads, 3in stainless downpipes by Okkim, Supersprint 3.25in cat back exhaust, cats replaced with straight pipes (v-band), Devil’s Own methanol injection, 630cc #Deka-injectors , #Bosch-044 fuel pump, #Wagner intercoolers, #034-Motorsport carbon intake kit with big ITG air filter, TFSI coils, 034 snubmount front bushing

    POWER 592hp and 802Nm

    TRANSMISSION 034 Motorsport carbon synchro kit, Stern engine and gearbox bushings, #JHM short shifter

    BRAKES B7 RS4 discs, C5 RS6 8-pot calipers, braided steel hoses, VW Phaeton cooler kit for brakes, stock brakes rear with braided steel hoses

    SUSPENSION #KW Variant 1, #H&R stiffer springs, hard bushes

    WHEELS AND TYRES #BBS / #BBS-LM 10 & 11x19in, Continental 5 235/35 and 265/30 tyres, 30mm spacers in front, 15mm in rear, red/gold Japan edition centre caps.

    EXTERIOR Wrapped in #3M 1080 gloss white by Eteippi.fi, brand new headlights, front grille surrounds #Plastidipped in black, fog light delete, front licence plate recess delete, Cupra R front lip, carbon side mirrors with RS4 logos sandblasted, VW Polo rear window viper, tinted windows.

    INTERIOR Corbeau RRS seats, OEM Alcantara steering wheel and gear knob, custom made Alcantara gear gaiter, #RNS-E navigation system, Vems EGT & AFR in pod gauge on steering wheel, another EGT gauge with warning light moulded into trimming left side of the steering wheel, #Kufatec OEM + TV tuner, #Audison 3-way speakers in front doors, garage door opener in cigarette lighter, interior lights replaced with LEDs.

    TUNING CONTACTS JTmedia.fi, Audiclub.fi/audifinns, cdlc.co, instagram.com/ jap3, fb.com/jtmedia.fi, eteippi.fi
    Stream item published successfully. Item will now be visible on your stream.