- Post is under moderationSUPER SALOON
We get to grips with Awesome’s latest project car, a booted Audi S3 that punches well above its weight and has the bite to match its monster bark... Awesome's 500bhp, Stage 3 S3 saloon is unleashed...
S3 SALOON Awesome’s APR-tuned demo car.
Words Jamie Arkle. Photography Paul Cowland.
Automotive fashion is a funny and complex thing, and it often seems that there’s little logic in what is and isn’t cool. Want an example of this in action? Well how about the small, hatchback based saloon, a sector of the UK car market that’s recently enjoyed something of a resurgence, yet for many, many years has been in the doldrums. Utter the phrase ‘small saloon’ to folk of a certain age and the cars they’ll almost certainly call to mind could hardly be called automotive greats: the Ford Orion and the Vauxhall Belmont – not exactly a stellar lineup, we’re sure you’ll agree!
So what’s brought about this sea change, this upswing in popularity? Well, we think credit should lie squarely with Audi, specifically the team that signed off the latest S3 saloon. We think even Audi itself could’ve been forgiven for being ever so slightly taken aback by the overwhelmingly positive reception this variant has had, and there’s little doubt that it’s set to be a fixture of the tuning scene for years to come, particularly if the guys at Awesome have anything to do with it.
Awesome has been responsible for some of the most notable tuned VW Group cars in recent years, so when the Manchester based VAG gurus selected the new S3 saloon as the basis of their next demo car, well, we knew that the resulting car would be seriously special.
“There were a number of cars under consideration when we opted to take on the S3,” recalls Mark Ash, Awesome’s Director “but I spotted one at APR at the start of 2016 and instantly fell in love with it, with the colour and the graphics pack. The decision as to which car we’d buy was made there and then.”
Now it might sound like building a demo car is the simplest thing in the world, particularly for a VW Group specialist like Awesome with access to a wealth of aftermarket parts, but this isn’t strictly true. Granted, having ready access to big brake and coilover kits (more on those later) certainly speeds up the build process, but then that’s just the easy bit. No, for a company’s personal car to really earn its keep it needs to push boundaries in terms of tuning – and boy does Awesome’s S3 deliver in this respect. The team started off by buying a brand new S3 and wasted no time in getting back in touch with APR, a firm that Awesome actually beta test for, and a well known and trusted name within the scene.
“This build was never about squeezing every last bit of power from the car as that would’ve made it too extreme, too focused and a far less enjoyable prospect to drive on the road,” explains Mark. “A big part of what we do at Awesome is carrying out balanced, considered tuning, providing kits that up the power and increase the performance in every aspect, yet don’t overly compromise the car in question.”
See what we mean when we said demo car building is trickier than it sounds? The call to APR meant that it wasn’t long before one of its all new, Stage 3 tuning kits for the 2.0 TFSI was winging its way across the Atlantic to Manchester, a kit that’s since gone on to play a defining role in this particular S3. The kit includes a number of highly developed components, including a Stage 3 s-tronic tune, ECU tune, cast downpipe, carbon intake tract, front mounted intercooler with silicone hoses, fuel pump, and EFR7163 turbo system.
Factor in the other supporting hardware that’s essential for an advanced build of this nature, namely the resonated exhaust from Milltek, and it becomes all too clear why the close working relationship between APR and Awesome has proved so valuable.
“There were some niggles involved in the development of the kit, true, but nothing more than you’d expect of an advanced package of modifications like this,” Mark explains. “Again, that’s another key aspect of a car like this – we’d much rather bits went wrong during the development process.”
The upshot of all this work and an in-depth development phase? A kit that’s been proven to boost the power generated by the EA888 to approximately 500bhp, a massive jump from the stock figure of 300bhp and enough to enable this diminutive saloon to see off any hot hatch you care to mention. It’s true what they say, power really is nothing without control – yes it’s a cliché, but then cliches have a habit of ringing true most of the time. Of course performance Audis and their iconic four-wheel drive drivetrains have always been well equipped in this respect, but that hasn’t prevented the team at Awesome from raiding their parts stash for a selection of uprated transmission goodies, namely a pair of uprated DQ250 DSG clutches. These are essential for enabling the S3 to ladle out its new found power to all four wheels in as even manner as possible, plus the OE hardware would no doubt have started to show the strain after a few hundred miles if left in situ.
The S3’s chassis has also been given an overhaul, the stock suspension, wheels and brakes all having made way for far more capable aftermarket offerings from Racingline, Neuspeed and Vagbremtechnic respectively. The front brake kit in question features a pair of massive 8-piston Brembo calipers originally intended for the Audi R8/Lamborghini Gallardo (winning all potential pub boasts at a stroke), and was selected thanks to its relatively lightweight, capability and piston layout; all highly significant considerations on a 500bhp saloon like this. These now house Project Mu H16-03 brake pads, the firm’s competition grade offering and one known for its resistance to fade, high initial ‘bite’ and fantastic release characteristics.
While hardly heavy, the OEM alloys were dumped in favour of a featherweight offering from Neuspeed, the RSE10. Not only do these look right at home peeking out from beneath the S3’s arches, they also tip the scales at just 21.5lb each, and therefore represent a significant reduction in unsprung weight – a true win-win scenario.
It’s fitting that we conclude this feature by discussing how this particular S3 looks, and that’s best summed up in one word – aggressive. Imagine a pit bull chewing up a wasp while being goaded by an especially foolhardy postman, and you’re still only halfway there! Audi has to take some of the credit for this of course, but it’s hard to deny that the styling work put in by the boys from Awesome has helped lift its looks far and above those of the standard car.
“The graphics package found on the original #APR car provided a lot of inspiration, but the livery our car now has is subtly different to APR’s, so it’s more of a homage.”
The livery means that this car can’t help but stand out wherever it goes, but we’re particularly fond of the more subtle additions Awesome has seen to factor in, like the splitter, diffuser, rear spoiler and door mirrors, all constructed from high grade carbon fibre.
So, what’s next? Well the life of a demo car is a hard one, so expect the S3 to be put to work drumming up support for the Stage 3 package (and much else) it now boasts, and there’s no denying that it represents the a great means of extracting massive power from #MQB platform cars with E888 engines. It means that though it might currently So there are almost certainly going to be further developments in the coming weeks and months – watch this space!
TECHNICAL DATA SPECIFICATION #2017 / #Audi-S3-Saloon / #Audi-S3 / #Audi / #Audi-EA888 / #Audi-S3-Saloon-ARP / #Audi-S3-8V #Audi-A3-8V / #Audi-8V / #Audi-A3 / #Audi-S3-Saloon-8V / #Audi-S3-Saloon-ARP-8V / #Audi-S3-Typ-8V / #Audi-A3-Typ-8V / #Audi-A3-Typ-8V / #Audi-S3-Saloon-Typ-8V
Engine 2.0 #EA888 Gen 3 DOHC I4 16v, #APR-Stage-3 tuning package comprising #EFR7163 twin scroll turbocharger, APR Stage 3 #DSG tune, #APR-Stage-3-ECU tune, #APR Stage 3 cast downpipe, APR carbon intake system, APR Front Mount intercooler with APR silicone charge hoses, APR low pressure fuel pump, resonated Milltek downpipe-back exhaust system with active valves
Transmission OEM Audi four-wheel drive system with front and rear differentials, #APR-DQ250 / #DSG clutches
Chassis #Racingline coil springs and stock dampers, #Vagbremtechnic front brake kit comprising #Brembo 8 piston calipers, 32x362mm two-piece discs and Project Mu H16-03 competition grade pads, 19x8.5in Neuspeed RSE10 wheels in satin gunmetal with ET45 offset
Interior Complete OEM Audi S3 interior
Exterior 2015 Audi S3 saloon in Misano red, carbon fibre front splitter, carbon fibre rear diffuser, carbon fibre door mirror covers and carbon fibre boot spoiler
Call: 0161 776 0777 www.awesomegti.com
Top: It’s a real head turner out on the road.
Above: Interior is nicely finished as standard.
Left: 19in Neuspeed wheel and Vagbremtechnic brakes.
Left: Shot inside Awesome’s HQ.
Below: Tasty carbon trim.
The APR turbocharger system
The twin-scroll EFR7163 turbo forms a key part of the Stage 3 kit, so it’s well worth taking a closer look at its capabilities. APR has extracted as much as 520bhp from #MQB cars fitted with this kit and has seen 10-second quarter-mile times, yet this hasn’t come at the expense of everyday drivability. Indeed, cars fitted with this turbo setup have been shown to retain OEM-levels of lag, while at the same time being devoid of the compromises many would expect of an engine of this size and with this state of tune.
“...increase the performance in every aspect ”
“I spotted one at APR and instantly fell in love with it”
Stream item published successfully. Item will now be visible on your stream.
- All mapped out. Interesting to read about the APR guys coming over from the US to map cars in the UK. I didn’t realise they made such an effort to ensAll mapped out. Interesting to read about the APR guys coming over from the US to map cars in the UK. I didn’t realise they made such an effort to ensure their software works exactly as is says, no matter where in the world the customer happens to live. Awesome’s Stage 3 S3 looks like a bit of a monster too – I’ve seen a couple of videos on Facebook where it looks properly quick. Do you plan to test this? Give me a call if you do – I’d love to ride shotgun! More ...
- Post is under moderation
No sleep 476HP 135i Wild 1 Series brings it on Most modified 135is we see are in sleeper guise. However, this boisterous example is loud and proud – and rightly so… Words: Elizabeth de Latour. Photos: Matt Richardson.
Last year saw this magazine nearly overrun with 1 Series feature cars. This was totally fine as far as we were concerned because a lot of you are clearly loving them, otherwise we wouldn’t have been inundated with such a huge variety of fantastic modded examples. The charms of the 1 Series are hard to resist and while some people might find the first generation hatch a little inelegant on the styling front, we reckon #BMW nailed it with the Coupé. And people clearly agree, as that’s mainly what everyone’s been modding. A quick glance at the classifieds shows that this iteration of the 1 Series is holding its value and while some people might think you’re not getting a lot of car for your money compared to what else you could buy, the appeal of a compact, sporty car that’s also practical and can be had with a huge range of engines is easy to see and hard to resist. It’s the perfect antidote to the supersizing epidemic that’s now a staple of the motoring industry. And it’s a car with plenty of potential. Just ask Dom C, because he took a fiery little 135i and turned it into a real beast. It’s most definitely not shy about what it’s capable of; with 476hp on-tap, why would you be? A sleeper this ain’t.
A glance at Dom’s car history shows you that the 135i fits right in with his taste in small, fast cars, which have included a Saxo VTR and VTS, a Toyota Glanza V turbo, a Civic Type R, and an Impreza RB5 – which is a little less small but was “mega”, according to Dom, so that’s fair enough. “I had a 120d,” he continues, “which was good on fuel. This was good for when I was going to business meetings, but I decided I wanted something really fast that would handle well and was exciting. There was nothing of this age with a six-cylinder engine and rear- wheel drive apart from a 135i, so I bought one.”
The car was purchased bone stock and the initial plan was just to fit a JB4 and an exhaust because these alone would amp up the performance in a big way. But after Dom had sampled the sweet taste of what the 135i could offer, there was no way he could go cold turkey. And he had a pusher.
“The car’s been sponsored by Hard Knocks Speed Shop,” Dom explains. “It saw that I was passionate about modding and we had a great relationship, so it offered to sponsor me. Badger there has done all the work.” With his sights set on some serious numbers, things were going to have to change…
That JB4 is now a Cobb, supplied by BW Chiptune with a custom remap by Litchfield. The exhaust is now a custom straight- through system from Hard Knocks Speed Shop, with no cats or silencing. There’s even a valve for increased loudness. There’s a video of it in action on our Instagram page (@pbmwmag) and, having heard it in person, we can confirm it’s very, very loud.
The path to 476hp is lined with a lot more than just a Cobb and a custom exhaust, though. Dom has been busy under the bonnet, with the resulting list of engine mods making for some impressive reading. The stuff you can see includes a set of BMS dual cone intakes and an HKS SSQV blow-off valve. And there’s much more going on
beneath the surface that you can’t see. The stars of the show are, without doubt, the Turbo Dynamics Stage 2 hybrid turbos that really help to push the power up. But they don’t have to go it alone; up front sits a beefy Pro Alloy intercooler, there’s a Fuel It Stage 3 uprated fuel pump, a VRSF metal charge pipe with meth bungs, VRSF cat-less downpipes, plus a BMS meth injection kit to help keep intake air temperatures down.
The end result of all that underbonnet wizardry is a very impressive dyno-proven 476hp and over 400lb ft of torque. That’s an awful lot of power to enjoy in a compact car such as this. And that dyno run took place on a really hot day with intake temperatures well over 80ºC and the ECU pulling the timing, so there’s potentially even more on tap than the figures suggest.
Of course, simply ramping up the power and hoping for the best is not the way to do things and most certainly not the way Dom was planning to do things. So those engine mods are joined by a supporting cast of chassis and drivetrain mods. The standard clutch would have been completely out of its depth with these sort of power figures so it’s been replaced with a much sturdier Spec Stage 3+ affair mated to a single mass flywheel. On the chassis front, BC Racing coilovers have been called to action, along with M3 lower control arms, and a strut brace. And that’s not all because Dom then took the car to FW Motorsport, run by Tom Walkinshaw’s son Fergus, who spent a day-and-a-half setting up the suspension after corner weighting the car. Dom is also planning to add some custom adjustable drop links.
The brakes haven’t been forgotten about either. With the 135i coming equipped with some pretty serious six-pot front calipers from the factory there was no need for a BBK, but grooved discs have been added and are clamped by Pagid RS29 race pads. Goodrich braided hoses and race brake fluid concludes the brake upgrades.
Somehow we’ve managed to make it this far without once mentioning the way this car looks – which isn’t easy because this is a 1 Series that stands out, and then some. A lot of this is to do with the Avery Denison Gloss Blue wrap. “The car was originally Monaco blue,” explains Dom, a colour that you can see lurking in the engine bay. “It had no presence and made the car not look as fast as it actually was. My neighbour had a GTR wrapped in this blue and I absolutely loved it, so I decided to get the 135i done in the same shade, and the bonnet and mirrors done in gloss black.”
With the 135i looking rather more rapid, Dom set about adding the aero addenda. This started off with the relatively subtle carbon front splitter, followed by the carbon bootlip spoiler, and then the bulging Seibon carbon bonnet with aero catches. But Dom refuses to take responsibility for that rear wing. “It’s all Hard Knocks’ fault,” he laughs. “They suggested I got a wing. I agreed and went online to buy it whilst in the pub… although I don’t actually remember buying it!” Oh dear. Still, while the APR rear wing would look out of place on many a car, the overall look of this 135i means it works here. It ties in nicely with the whole black and blue theme, as do the wheels, which are Apex Aero-7 18s, with the car’s arches having been rolled to help accommodate them. The wheels have been wrapped in super-sticky Advan AD08R semi-slick rubber for maximum grip.
As for that Gran Turismo sun strip: “I think it looks badass,” explains Dom, “and it makes a huge difference to the feel of the car when driving.” The interior has, for now, been left largely standard, bar the removal of the rear seats, but Dom was planning on fitting some bucket seats and a roll-cage, that is before he decided to sell the car…
We should be used to it by now, feature cars owners getting in touch not long after a shoot informing us that they are selling their BMW. That’s the way it is with projects, but it was still a little surprising to hear it from Dom considering just how much he’d put into the 135i. It turns out he’s gone and bought himself a Nissan GTR and, to be fair, the signs were there all along as we recall he mentioned it on the day of the shoot. We can’t really blame him either; the GTR is a hell of a car and probably one of the few things that could get his heart pumping the same way as his ferocious 135i. Could we, he asked, mention that it was going to be up for sale? Of course. But then, a month later, we received another email. The 135i was staying, a stablemate for the GTR, and Dom had, in his own words, “gone full circle”. In fact, he now plans to take the 135i to the next level: a roll-cage, bucket seats and steering wheel will transform the interior, while a race diffuser, a side exit exhaust, and a body kit will transform the exterior. “It’s come too far to go back…!” were Dom’s parting words on the email. We can’t wait to see him go all the way.
Custom-mounted meth injection kit helps keep inlet temps down and power up.
DATA FILE #BMW-E82 / #BMW-135i / #BMW-135i-E82 / #BMW / #BMW-135i-Tuned / #BMW-1-Series / #BMW-1-Series-E82 / #Turbo-Dynamics / #Apex / #BMW-135i-Tuned-E82 /
ENGINE AND TRANSMISSION 3.0-litre twin-turbo straight-six #N54B30 / #N54 / #BMW-N54 , #Cobb-V3-Accessport custom mapped by #Litchfield-Motors , #BMS dual cone air intakes, #HKS-SSQV blow-off valve, #Turbo-Dynamics-Stage-2 hybrid turbos, #Pro-Alloy front mount intercooler, Fuel It Stage 3 upgraded fuel pump, custom- mounted BMS meth injection kit, #VRSF metal charge pipe with meth bungs, VRSF cat-less downpipes, Hard Knocks Speed Shop custom Y-pipe , custom straight- through two into one 3” de-catted centre section, custom quad exit exhaust system with electronic valves. Six-speed manual gearbox, #BMWP short-shift, Spec Stage 3+ clutch and single mass flywheel
POWER & TORQUE 476hp and 400lb ft+
CHASSIS 8x18” ET45 (front) and 9x18” ET50 (rear) #Apex-Aero-7 satin black forged wheels with 225/40 (front) and 255/35 (rear) Advan AD08R tyres, #BC-Racing coilovers, M3 lower control arms, strut brace, car corner weighted, Pagid RS29 race brake pads, grooved discs, #Goodrich braided hoses, race brake fluid
EXTERIOR Wrapped in Avery Denison gloss blue with gloss black roof and gloss black door mirrors, tinted windows, rolled arches, gloss black kidney grilles, carbon front splitter, #Seibon carbon #Powerdome bonnet with AeroCatches, carbon rear spoiler, #APR carbon wing, custom carbon diffuser, #BMW Darkline rear lights
INTERIOR Factory grey M Sport leather, Cobb V3 Accessport controller, rear seats removed
THANKS Chris Bourton (Badger) at Hard Knocks Speed Shop, Fergus Walkinshaw at FW Motorsport, #Litchfield motors for mapping, #SSDD-Motorsport , and Amber performanceStream item published successfully. Item will now be visible on your stream.
- Post is under moderationVW mk6 GOLF R / Is this tastefully upgraded Golf R the ultimate all-rounder?
HIGH STANDARD / #Volkswagen-Golf-Mk6 / #Volkswagen-Golf / #Volkswagen-Golf-VI / #VW-Golf / #VW-Golf-Mk6 / #VW-Golf-VI / #VW / #Volkswagen / #Volkswagen-Golf-TFSI / #Volkswagen-Golf-2.0TFSI / #Volkswagen-Golf-2.0TFSI-Mk6 / #Volkswagen-Golf-2.0TFSI-VI /
After cutting his tuning teeth on #JDM metal Stan Kowalski thought he would try a Dub or two. We think he made a wise decision… Words: Sean Matthews. Photos: Neil Sterry.
It’s fair to say that not all journeys that start from A necessarily find their way to B. Even with the best intentions, the route we take in life (whether it’s career, serious life decisions or, in Stan Kowalski’s case, his favoured car scene obsession) can naturally digress and before we know it we’re travelling in the opposite direction. Fortunately, this doesn’t have to be a negative thing, as Stan’s stunning Mk6 clearly demonstrates…
You see, the New York native started out favouring brands from the ‘Land of the Rising Sun’, having owned a few Mitsubishis. “When I was younger I was a JDM guy,” he admits.
“When I got my license I got my first second-gen Mitsubishi Eclipse. After that I thought I’d try a Subaru out. I actually crashed the Subaru 18 days after having it. I then got myself back into another Eclipse straight after, then onto an Evo. It wasn’t long before I blew up the stock motor.
I rebuilt it and then decided to take it on the track. However, I ended up blowing up the rebuilt motor due to a fuel injector failure. I really liked to race cars but after all I was getting older, and thought better about getting into trouble getting caught doing street racing. So I figured I’d try the show scene instead…”
A factor that gave Stan the direction to change the scene he was involved in was actually his mum. “She had always told me that she saw me driving a GTI,” he explains. “With that I decided to go on the hunt for a Mk4 R32.
I sold the Evo with the blown motor, which I ended up getting good money for.” Looking through all the standard avenues, such as Craigslist and cars.com, yielded no clear or promising results for the right Golf so the next step was to hit the ‘wanted’ section on Vortex and post up details of his dream R32. A reply from Massachusetts arrived, with the seller needing his car gone fast. Stan went to see the car in question and fell in love with it instantly.
This may have been assisted by the fact it had a Stage 2 Vortech V9 supercharger! With 333 all-wheel- horsepower and 320lb ft of torque the R32 had more than enough go to see off many cars and keep its new power-obsessed owner happy.
Whilst owning the R32 Stan and some friends started the #VW club ‘VolksNation’, whom you may have seen on Instagram and which has a healthy following across the world. “Me and my friend Joel started the group. We have a whole bunch of different members, some in New York, some in Pennsylvania, and some in New Jersey. We are about 65 strong but we are continuing to grow.” To say he fell into the dub scene hard is clearly an understatement!
However, another reroute was about to occur and it wasn’t long before Stan was already feeling the pull from another über Golf. “I was going to all these shows in the R32 and all it had was the supercharger, wheels and suspension. Everyone else was going crazy with all they do to their cars and I wanted some of the action… but this time I wanted to seriously modify a Golf R. So, even though it was hard to give the R32 up, I put it up for sale for sheets and giggles at $23,000. It was a steep price but I could afford to as I didn’t need to sell it. And what do you know? Someone came and gave me $23,000 for it!”
So by June 2013, with his back pocket full of cash, Stan ventured to his local VW dealer and put a down payment on a Tornado red Mk6 R. Whilst waiting for his ride to turn up, other money was being ploughed into parts waiting to grace the Golf ready to take it to the next level. “I bought a downpipe, a cat-back exhaust, a high pressure fuel pump and an intake – basically everything United Motorsports (UM) suggested I need to get the car to Stage 2+. I haven’t had it on the rolling road yet but I have seen in many places that 330whp and 400lb ft is normal.”
Stan trusted United Motorsports’s guidance already as he had found the guys there to be a great help when he owned his ’charged R32 previously, as it had not been running right when he first bought it. “As I had a lot of trust with Jeff when he worked on the R32, I only wanted him to work on the R,” Stan explains.
Stan’s next plan of action was to work on the chassis of the R, and it was his chance to fulfil a long held ambition to ride on air. Through more recommendations Open Road Tuning in Nashville came up trumps and was contacted to provide Stan’s car with Air-Lift Performance struts and the ubiquitous V2 auto-pilot management. “I went to them for the hook-up because they gave it to me at a pretty good price. Originally, the boot build and the installation I did myself but then a friend of mine from our VolksNation club opened a shop in Astoria, Queens and suggested we do the trunk setup differently, so I took it to him.” The boot received a subtle tweak, the tank being painted in the same shade of red as the R and some vinyl work was added in for good measure.
An Autopower Industries roll-cage, cordially powdercoated body colour, was then bolted-in, and this completes the rear. The forged Watercooled Industries three-piece MT10 wheels add the finishing touches to the look of the car, giving it a real concept sports car-style that wouldn’t look out of place at an international autoshow.
And the best part of the build for Stan? “Ah man, I just love the whole car. I take it to shows and everyone else seems to love it just as much as I do. People come up to me and take pictures of the R and ask how I got so much done in such a short time. It helps to have a garage full of parts whilst you wait for your car to be delivered! I used to go to shows and never win but in the past year I’ve taken first place at Volkswagen Show New Jersey and first place at Waterfest. I went to H2O International and ended up getting nominated for ‘Top Dawg’ which was a great feeling. But when I saw what I was up against, I was like ‘damn…’ as they all had shaved bays and crazy swaps. But it was a real honour to be in the ‘Top Dawg’ competition.”
Most recently Stan was representing Volksnation at Dub Expo in Atlantic City, winning ‘best in category’ and the coveted ‘best of show’. Stan and his fiancée Nicole are planning to get married this summer, so the changes that are still to come will have to be done on a slightly tighter budget. These will include hydrodipping the wheel centres and bumper plastics, shaving the badges and side markers to give it a subtle makeover.
It seems that Stan’s journey from JDM fan to serious Dub player has found its true course, with no end to this route in sight. We have a feeling we will be watching him as he continues to weave his way through the VW tuning scene for a long time to come.
“People come up to me and take pictures of the R and ask how I got so much done in such a short time”
ENGINE: 2.0-litre four-cylinder TFSI #VW-K04 , #CTS-Turbo intake, #Forge-Motorsport intercooler, coolant hoses, and diverter valve, #Integrated-Engineering valve cover, R8 coil packs, #NGK spark plugs, #BSH engine mounts, #Magnaflow cat-back exhaust, #APR downpipes, #Performance-Haldex controller, #Southbend Stage 3 endurance clutch, #Tyrolsport solid shifter bracket bushing, #ECS-Tuning cross-drilled/slotted discs with Hawk pads, Tyrolsport brake caliper stiffening kit, #Tyrolsport Master Bracket
CHASSIS: 9.5x18” #ET41 10x18” #ET38 WCI MT10 wheels, 205/40/18 and 215/40/18 Nitto Neo Gen tyres, #Air-Lift-Performance Series fronts and Double Bellow Bags rear, #AutoPilot-V2 air management, #H&R anti-roll bars, #Tyrolsport-Deadset subframe collar kit, Tyrolsport Deadset rear subframe kit
EXTERIOR: ECS Tuning carbon fibre front lip and rear diffuser, CS Tuning carbon fibre side skirts, black vinyl wrapped roof, rear wiper delete, carbon fibre side view mirror caps
INTERIOR: Cipher Auto racing seats, Takata racing harnesses, Autopower four-point bolt-in cage, rear seat delete, carbon fibre interior trim work, Forge shift knob, custom suede trunk setup, Rennline door straps, LED lights
SHOUT: Mike and the guys at Tyrolsport, Chris and the guys at #C&M-Performance , Brett and the guys at The Custom Shop, My fiancée Nicole, My Volksnation teamStream item published successfully. Item will now be visible on your stream.
- Post is under moderationBRIGHT IDEAS DRIVEN: MK3 TTS ROAD TEST #2016
Words Jarkle / Photography Chris Wallbank
MILLTEK TTS 382bhp and big fun
The Mk3 TTS is a great looking and highly capable car – but with some simple upgrades it can become so much more…
The #Audi-TT is a deceptively brilliant car with a flexible range of engines and transmissions that mean it really can be all things to all men. Think about it, there are very few sports cars that can claim to be every bit as suited to hammering around the Nürburgring as they are pottering around town, and the TT manages both of these with ease. This amazing spread of abilities became more apparent with the recent launch of the third generation TT, a car that managed to well and truly banish any cruel associations about it being ‘nothing more than a Golf in a frock,’ going on to sell in huge numbers – and it’s only been on forecourts for a handful of months!
One firm with an intimate knowledge of Audi’s iconic sports car is Milltek, the builder of beautifully balanced and exceptionally sonorous exhaust systems. The TT has long been a part of their product portfolio and the team at Milltek have built up something of a reputation for churning out well modified Audis; the TTS you see here being the latest example. “It’s hard to overstate just how good a car the latest TT is in standard guise; it’s balanced, tight and pretty much the ideal sports car. Making it even better without going too far and compromising one aspect was always going to be a challenge, hence why we spent so long perfecting every aspect,” muses Steve Pound, Milltek’s MD.
This reluctance to dive right in is more than understandable and explains why the spec of Milltek’s TTS doesn’t include a massive aftermarket turbo, air suspension or wheels big enough to make a West Coast rapper blush. It’s devoid of these things because fitting them would almost certainly push it in one set direction, compromising its overall capabilities and rendering it a less capable car in the process.
Don’t for a minute go thinking that this car is all show and no go though, because that’s far from the case. Key to this TT’s renewed performance is the Milltek system that now snakes its way out from the engine bay and under the car, before splitting into two and ending with an attractive twin tailpipe design. Even this could have been taken to extremes far too easily. Milltek could’ve opted for a massive diameter pipe with no baffles and boxes, an exhaust that would’ve been the automotive equivalent of tying sticks of dynamite to a bull’s horns, showing it a red rag, then chucking it into the proverbial china shop, before locking the door.
“Making an exhaust that bellows and makes a huge noise, no matter how much throttle is being applied, is all too easy,” explains Steve with a chuckle. “Making one that actually suits the character of the car that it’s attached to, well, that’s a bit more involved!”
The system consists of a 3-inch downpipe, high-flow sports cat, a Milltek Sport cat-back system, plus the previously mentioned twin tailpipes. The system manages to tread the fine line between sporty and fabulously vocal, with the resulting noise being aggressive without ever becoming intrusive. Put simply, you’ll have no problem using Milltek’s TTS on a daily basis, and quiet Sunday trips to the supermarket won’t suddenly give way to a noise not heard since the late ’90s, when the likes of the Subaru Impreza and Sapphire Cosworth were kings of the UK scene.
The system also provides proven exhaling benefits for the deep-breathing inline four that dominates the space between the Milltek TT’s wings. What Milltek don’t know about performance enhancing systems really isn’t worth knowing, and the one strapped to the TT embodies a good portion of their hardwon knowhow. The high-flow sports cat is particularly impressive as it allows the TT to stay on the right side of UK emissions regulations without strangling performance or sound.
That same four pot also features a VWRacing R600 intake and a Stage 2 APR remap. Both fall squarely into the ‘quality over quantity’ bracket, and both offer up demonstrable performance benefits thanks to their clever design and the careful nature in which they’ve been applied.
The Volkswagen Racing cold air intake is especially trick, and features a double sized filter housed in a giant air box, the latter fed via a pair of carefully developed inlet tracts. The material inside the box itself is equally sophisticated thanks to a triple layer of TriFoam, a substance that’s commonly found inside the airboxes of F1 teams. Not only does the ‘domed’ design of this material provide increased surface area and contamination capturing properties, it provides even more airflow with lower restriction. The result is a high volume and unbroken supply of cold air funnelled directly from the atmosphere (i.e from outside the TT’s engine bay) to the engine itself, and as all good engineers know, cooler air in the cylinder equates to more power and more bang for your buck.
“It’s easy to get stuck in the trap of thinking that all induction kits do the same job and therefore are the same, but that’s just not the case,” explains Steve. “We were careful to match the induction tract to the car and its eventual purpose and rough power output. The R600 is good for 600bhp, so we’re more than covered for the foreseeable future!”
Those three innocuous sounding changes have left the Milltek TTS able to call on a thumping 382bhp of power and 387lb/ft of torque, but there’s far more at play here than mere grunt. Kneel down to inspect the front brake setup and you’ll be greeted by the welcome sight of eight-piston Brembo calipers and imposing 362mm drilled and grooved discs, with Project Mu high friction brake pads sandwiched in between. Not only does this give the TT the stopping power to match its newly hiked power output, it does so without making hauling it to a stop in any way daunting or ‘snatchy.’ Partly that’s down to the brakes themselves, but the fact that the whole car has been expertly corner weighted and balanced certainly doesn’t hurt either.
We’ve said it before and doubtless we’ll say it again, but building a car like this TT, one that subtly balances performance with everyday, real world usability, takes a staggering amount of thought, planning and considered execution. As we’ve already said, humongous aftermarket turbo setups and other bolt-ons associated with massive power projects are notable by their absence and for once this is a good thing. Driving this car now is an utter joy, a brilliant way to get ‘back to basics’ and to re-connect with what makes hustling a well tuned car such an involving experience. The addition of the Milltek system, Stage 2 remap and VWRacing inlet lends the TTS a hit of extra aggression without ever becoming intimidating or intrusive, while the extra power that these modifications have gifted the car with is available across the rev range.
A few short minutes behind the wheel are all that’s needed to confirm that Steve, the Milltek team and the guys at Bilstein, APR and VWRacing have more than delivered. Perhaps the ultimate proof of the transformation that’s been wrought is just how balanced everything is, and in this respect it doesn’t feel like a tuned car, certainly not in the traditional sense. Power comes in smoothly and all 382bhp is usable; the exhaust note is sporting at idle and raucous when you want it to be – i.e. when you’re pushing on – and there’s a pleasing induction ‘roar’ to be had when you plant the throttle. It handles well, (the comprehensive corner weighting and balancing evidently having worked a treat), and those beefy Brembos make short work of any excess speed carried into the corners. In short, it’s the ultimate all round, fast road car, one that’s utterly complete in every respect. Impressive? Sure. Fun? Absolutely!
SPECIFICATION / #Milltek / #Audi-TTS / #Audi-TTS-Milltek / #Audi-TT / #Audi / #Audi-TT-8S / #Audi-TTS-8S / #Quattro
Engine 1984cc DOHC16v 82.5 x 92.8 bore x stroke and 9.3:1 compression ratio, OE single turbo system, #Volkswagen-Racing-R600 cold air intake with high capacity air box, twin air induction tracts and fullyenclosed filter housing, Stage 2 #APR-ECU remap, #Milltek large bore downpipe and hi-flow sports cat, stainless steel cat-back system with twin tail pipes
Power 382bhp and 387lb/ft
Transmission OE six-speed manual with #Quattro four-wheel drive system
Chassis OE suspension setup with springs and dampers, #Brembo eight piston front calipers with 362mm drilled and grooved discs, #Project-Mu brake pads, OE alloy wheels
Interior Complete Nappa leather OE interior
Contacts Millteksport www.millteksport.com / #APR www.goapr.co.uk
Milltek TTS is a lot of fun Virtual cockpit
Opposite page: Quad pipes look great / Left: Interior very well equipped.
“...the resulting noise being aggressive without being intrusive”Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationUNDER THE RADAR S3 8V 380bhp sleeper
From Imola yellow daily driver, to matt grey stealth bomber; this 380bhp S3 has packs an unexpected punch… Words Davy Lewis. Photography Dave Jack.
I have a confession to make: I like yellow cars. There’s something about the bright hue that just does it for me – especially when it’s freshly polished on a bright sunny day (not that this happens much in the UK). I almost bought an Imola yellow B5 S4 avant a few months back, which I neither needed, nor could really justify – but it was the fact it was yellow that had me sorely tempted.
So, why on earth am I banging on about yellow, when the car you here is clearly, grey? Well, I’ll let you into a little secret: this S3 was once yellow (technically still is, it’s just hidden under an immaculately well applied 3M wrap).
“I fancied a change from yellow and the matt grey appealed as it’s subtle and understated – the complete opposite to how it was originally,” says owner Richard Steele. It’s refreshing to see someone wrap their car in this way – many do it the other way round – adding bright vinyl to a black or grey car.
“Prior to the S3 I had a slightly modified A3 Black Edition. I loved everything about the car, until I test drove an S3 and had to have one!” says Richard. With his heart set on an 8P, he set about searching for the perfect car. He quickly found the Imola yellow example, which ticked (almost) all the boxes – it was a Black Edition with DSG and sat nav – the only things missing were the wing back Recaros.
“My goal with the S3 was to give it RS3-inspired looks and performance as this is the car I ultimately hoped to own eventually; at the time I wasn’t really in a position to afford an RS,” recalls Richard.
The upgrades began slowly at first with a Stage 1 remap, some new wheels, and lowering springs. But it wasn’t long before things progressed somewhat…
Richard continues, “After about a year of ownership I ended up with a 380bhp, mini monster that would give most big fish a run for their money. The 0-60 was recorded on a Racelogic box at 3.7-seconds. It’s fair to say that with launch control, it went like a stabbed rat!” he laughs. With relatively simple engine upgrades, it’s testament to just how good the S3’s 2.0 TFSI unit is, that it can be persuaded to make almost 400bhp and deliver supercar levels of acceleration.
An APR Stage 2+ map is key to the power, which has been calibrated to work with the full Milltek turbo-back exhaust system with de-cat. With the restrictive cat and downpipes replaced, there’s so much more potential in these cars. A Loba high-pressure pump gets the super unleaded in fast, while a CTS carbon intake takes care of feeding cool air to the engine. With 380bhp and 559Nm, this is one rapid S3. Any more than this would require turbo and supporting upgrades, but for bolt-on tuning on OE engine and turbo, it’s certainly effective.
Part of the appeal with this particular S3 was the fact it had an S-tronic box. The stock unit offers fast shifts – but these can be ramped up further still with a gearbox map. Ecotune have livened things up so that Richard can hold onto gears for longer; take advantage of faster, crisper shifts and, of course, use the launch control function – which was key to the blistering 0-60mph time he achieved.
When it comes to wraps, the matt grey look always seems to work well, especially when teamed up with some gloss black details. The window surrounds and rear badges are all gloss, as well as the RS-style honeycomb grille and air intakes in the front bumper. It all looks very classy. But there’s a nod to the OEM paintwork with the bright yellow brake calipers and S3 badges.
Wheel choice is something that’s very personal and even slight differences in offset or design can have a big impact on the overall look of a car. In this case, Richard has stayed true to his OEM roots and gone for a set of 8x18in multi-spokes from an A4 DTM. They look like they were made for the 8P; subtle, classy and offering plenty of room to show off the bright yellow brakes (with some 3mm spacers added). Incidentally, the calipers are RS3 units, painted to match the original Imola yellow paintwork – but they look just as at home alongside this matt grey wrap. These high-spec OEM brakes also do a grand job of hauling this 380bhp 8P down from big speeds.
The final chassis tweak came in the form of the suspension. Not wanting to go for uncompromising coilovers, Richard fitted some quality H&R sports springs which bring the ride height down nicely, which not only looks much better also tightens up the handling. With less pitch and roll, the S3 feels more planted through turns, allowing more spirited progress to be made. Thankfully there’s plenty of grip from the quattro drive system, powering Goodyear Eagle F1s at each corner.
Inside, this immaculate S3 is already well equipped with a flat-bottom wheel, Bose audio and sat nav, but that hasn’t stopped Richard putting a personal touch on it. Some neat yellow stitching has been added to the wheels and the gear gaiter – another nod to this car’s Imola yellow roots.
A large part of the fun for Richard, like many others, is being able to meet a network of like minded Audi enthusiasts. “I’ve made good friends with local enthusiasts,” he says, “they all had a part to play in the build; we always help one another with tuning each other’s cars and sharing advice/opinions. It’s this aspect of the build I’ve enjoyed the most.”
With the S3 pretty much where Richard wants it; that is, a credible RS3-chaser; he’s decided it’s time for a change... “Just as I was getting to the stage where I was happy with the build, a perfectly spec’d and priced Daytona grey RS3 came along, so I ended up parting with my beloved S3. The RS3 build is currently underway and should hopefully be featuring in #Drive-My in the near future,” he adds with a smile. We hope so!
SPECIFICATION #Audi-S3-8P / #2011 / #Audi-A3-8P / #Audi-S3 / #Audi / #Audi-A3 /
Engine 2.0 #TFSI 4-cylinder turbo, #CTS-Turbo cold air intake and heat shield, #Loba high pressure fuel pump, turbo back full decat non-res #Milltek exhaust system, #APR stage 2+ map.
Power 380bhp and 559Nm.
Transmission 6-speed #S-tronic with #Ecotune custom map.
Brakes Custom RS3 front calipers, TT RS front discs, #HEL braided lines, stock S3 rears.
Suspension #H&R sports springs.
Wheels and tyres 8x18in #Audi A4 #DTM wheels with Goodyear Eagle F1 Asymmetric 2 225/40R18 and 3mm spacers at the front.
Exterior #3M matt dark grey vinyl wrap by TLC Detailing, custom S3 badges, RS3-style grille, sticky vinyl personalised number plate, gloss black trim, APR badge.
Interior Recaro bucket seats, custom steering wheel with yellow interior stitching to match.
Tuning contacts/thanks Ecotune www.ecotune-scotland.co.uk, TLC Detailing www.tlcdetailing.co.uk, APR www.goapr.co.uk, Dave Jack at Space 21 Photography for the photoshoot
Top: Fast but stealthy Below: More cheeky yellow details
“With launch control, it went like a stabbed rat!”
Below left: Yellow stitching is neat Bottom More yellow on the RS3 brakes.
“I ended up with a 380bhp, mini monster”
Above: Grey wrap looks classy on this 8P S3.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationTEAM AMERICA
When Kings Auto Body Shop decided to build an E46 M3 racer, it employed the philosophy of go big or go home. Kings Auto Body Shop took an uncompromising approach to building this E46 M3 racer. ‘Go big or go home’ were the watchwords and, with genuine GTR DNA, it certainly delivers the goods… Words: Daniel Bevis. Photos: Andy Tipping.
There are many varied and disparate cars that you may spot on any given day at the #Nurburgring , from race prototypes to Transit vans, stripped-out track day specials to commuter-spec Octavias, and everything in between. But the three most prevalent sights can be neatly subdivided into three categories: Porsche 911s (of varying vintage, state of tune and level of competence), locals in diesel Golfs (who are invariably making much more rapid progress than any of the 911s), and heavily tweaked M3s. The Green Hell and the M3 go hand in hand, and there’s something addictive to the owners of E36s and E46s in particular that keeps them coming back, eager to test out the effectiveness of their latest choice of rubber or tweaks to their suspension.
The racy E46 M3 that’s posing for the lens today is a true-blue Nordschleife battler, exactly the type of thing that you’d expect to see bobbing around the Karussell with flames licking from its cheeky side-exit pipes…except that it isn’t. It’s never even been there. This car, while it may appear at first glance to be a hardcore Euro race build, is in fact Californian through-and-through, and the closer you look, the more dedication to Stateside tuning you discover. Built and raced by Kings Auto Body Shop in Huntington Beach, it’s as American as apple pie, colossal drugstores, and putting too many advert breaks in TV shows. It’s just one tiny step short of being plastered in stars and stripes.
The project acts as a sort of glorious manifestation of the vivid dreams of Ayed Alnajjar, the man who happily dotes on Kings Auto Body like a proud father. “I purchased the shop in 2013, and I brought it back to life,” he explains. “We mostly do insurance work, but our signature is race cars and wide bodies. And me personally? I’ve owned over 20 BMWs over the years, and this is my second BMW race car.” You can see why the project was spirited into being – a history of Bavarian fettling, a shop in which to carry out the work to expert level, and a desire to showcase the skills of the business in a fairly visible manner. It’d be madness for Ayed not to build a gorgeously detailed and brutally effective M3 racer, really. What a fortuitous position to find oneself in.
Now, you may be eyeing the broad, aggressive girth of the E46 and pondering the origins of the aesthetic. DTM, perhaps? It’s wider than a #BTCC racer, that’s for sure, but there’s a distinct Euro race car vibe radiating from the M3 as it sits menacingly before the lens, the exhaust ticking frantically after an enthusiastic run. But looks can be deceiving, and this car has been leading you up a dark path… the inspiration for the look came, in fact, from the M3 GTR – one of the key elements of quintessential American-ness that makes this car unique.
A quick history lesson, then. The E46 M3 road car, as we know, arrived on the scene in late-2000 sporting a 3.2-litre S54 straightsix under its extravagantly bulging bonnet. It was a bona fide muscle car, offering a significant power hike over its E36 predecessor, and rocking the sort of unmistakable road presence that would trigger a reflex to involuntarily pull out of the way as soon as it appeared in an opponent’s rear view mirror. It didn’t ask, it just took. An uncompromising thing.
Race versions inevitably ensued, and the M3 GTR development became a shining star in the GT2 class of the American Le Mans Series (ALMS). It was powered by a #P60B40 motor, a 4.0-litre V8 only to be found in the GTR, snorting out somewhere between 440-470hp depending on setup.
The M3 GTR was, it has to be said, a bit of a naughty boy. While S54-powered E46s would be monstered by Porsche 911 GT3s on track, the V8-engined cars were rather dominant at the hands of Schnitzer Motorsport, which caused Porsche to cry foul play: it pointed out, quite fairly, that it wasn’t possible to buy a V8-engined E46 road car, so it was violating the spirit of the ALMS ethos. The governing body insisted that a road-going variant must be on sale on two continents within a year of the rules being drawn up to be eligible, and BMW made plans to build ten road cars for such a purpose, to be sold at €250,000 apiece. In the end, however, they didn’t bother – they built six – but these cars weren’t made available for public sale. Indeed, three of them were just development mules that got scrapped.
When the rules changed in 2002, stipulating that 100 cars had to be built to homologate the racers, BMW pulled out of ALMS altogether. This means that if you want to buy an apple-pie M3 GTR, well, you can’t.
That’s why Ayed decided to build one. Not a faithful but unforgiving V8-engined homage, but a proven and reliable S54-powered E46 whose body pays tribute to the shortlived splendour of the GTR. The car’s wearing a Flossman GTR wide-body kit, which is just about as authentic as it’s possible to get with this sort of thing; the wider wings and arches, the front and rear bumpers, the aero side skirts, it’s all artfully hand-crafted in Germany by Peter Flossman, linchpin of the Judd racing team among much else, and it’s all to the original BMW Motorsport development specs for the GTR race car, as tested in BMW’s own wind tunnel. It is, in short, a pukka piece of kit.
But Ayed was always fully intent on doing this properly: “My previous race car was an E36 M3,” he recalls. “I built up the engine to the best of its abilities, but the best I could reliably get with that car with cams was 270hp. I wasn’t happy with the wheel space either because I couldn’t fit anything bigger than 255-section tyres. So I decided to go with the E46 M3, it just made sense. As standard it makes more power than a built S52 engine, and once I got the E46 M3, I decided to go big or go home! I wanted to make a true one-of-a-kind E46, with thoroughbred race car DNA.”
Well yes, there’s no arguing that he’s achieved that with some level of gusto. Having purchased the car as a bare shell – no engine, no transmission, no interior, no suspension – the team at Kings set about building a pure race weapon from the ground up, selecting every component based on its performance creds as well as light weight and durability. Under the copiously vented DTM Fiberwerkz GTR bonnet sits a full-race S54 with hot Schrick cams, Stage 3 heads and a sultry CSL air box, all of which spits out its heady gases through a customcrafted side-exit exhaust (just like a real M3 GTR race car!). The chassis is suspended by Moton coilovers and all manner of goodies from the Ground Control catalogue, with some substantial Brembos champing at the bit to rein all of that thrust back in. It’s a very effective package, and the spec list reads like a who’s-who of quality parts.
“The car was built for the National Auto Sport Association (NASA) German Tuning Series, although the car was actually debuted at SEMA 2014. It was its first time out in public once we’d finished the build, and people’s reactions were amazing. I can’t tell you how many people have told me this is their dream car!” The important point that Ayed’s not making here, of course, is that it’s his dream car too – and he’s the one holding the keys. Funny how life works out sometimes, isn’t it?
This build, then, is a fusion of BMW developmental tangents. Given the chance, it’d lap up the verdant and serpentine spaghetti curves of the Nürburgring all day long, negotiating the tricky cambers, undulating gradients and truculent weather systems as being all in a day’s work. But, as fate insists, it’s not a moistened Euro fighter – it’s a dry-as-a-bone Cali scrapper. The neat link here is that a couple of the original Schnitzer GTR race cars saw later action at the ’Ring for the 2003 24-Hour event, which pulls the DNA across the Atlantic, and then pings it back like a piece of tautly-stretched elastic and fires it squarely into Kings Auto Body Shop with a resounding thump.
Ayed’s out there in the glaring West Coast sun, wringing the M3’s neck and taking scalps in the NASA GTS, as stridently as the GTRs of yore – and this surely means that, dream fulfilled, he can dust off his hands and enjoy the fruits of Kings’ labours, yes? No, of course not. These things are never finished. And now that everything’s nicely bedded in, a GTR rep should really have a V-engine, shouldn’t it? What do you say then, Ayed – fancy tracking down one of those unicorn P60 V8s? “No,” he says, scratching his chin thoughtfully. “I think I want to put a V10 in there.” Well, he did say ‘go big or go home’…
TECHNICAL DATA FILE #BMW E46 M3 Racer / #BMW-M3-Racer / #BMW-M3-Racer-E46 / #BMW-M3-E46 / #BMW-E46 / #BMW-M3 /
ENGINE & TRANSMISSION 3.2-litre straight-six #S54B32 / #S54 , #CSL air box, 288/280 Schrick cams, Stage 3 heads, ported throttle body, high compression (12.5:1 ratio), AP pulleys, #AP headers, custom side-exit exhaust system, Stage 4 clutch, #AEM infinity standalone management, sixspeed manual transmission rebuilt with 3.91 gearing.
CHASSIS 11x18” #Apex-EC-7 wheels (front and rear) (ET25, 15mm spacers all-round), 295/30 soft-compound tyres (front and rear), Motorsport wheel studs with race nuts, #Moton three-way adjustable coilovers, Ground Control camber plates, Ground Control anti-roll bars, #Ground-Control adjustable control arms, #Brembo BBK with four-piston front calipers and 355mm discs, four-piston rears and 345mm discs, stainless steel lines, #Hard-Motorsport brake cooling backing plates.
EXTERIOR Flossman GTR wide-body kit, #APR front splitter, APR diffuser built and designed by Raceworkz , #APR-GT500 wing (71” wide), Hard Motorsport retractable tow hooks, #DTM-Fiberwerkz GTR bonnet, DTM Fiberwerkz carbon-fibre roof, carbon fibre bootlid, RAD Industries Lexan windows, #RAD-Industries custom fuel cell.
INTERIOR #Sparco Ergo seat, Sparco steering wheel, Sparco harness, mesh window net, mesh centre net, Hard Motorsport CAE shifter, fire extinguisher system, #GS-Werks custom roll-cage.
THANKS Undr8d Empire, ECElite Automotive, DTM Fiberwerkz, RAD Industries, Hard Motorsport, Hardware Motorsports, Raceworkz, GSR Technik, GS Werks.
“Once I got the E46 M3, E46 M3 Racer I decided to go big or go home! I wanted to make a one-of-a-kind E46, with thoroughbred race car DNA”
Kings’ M3 looks the business thanks to #Flossman-GTR wide-body kit, built to the original #BMW-Motorsport specs of the GTR race car.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationRED LETTER DAYS #Audi A4 2.0 TFSI 500bhp, big turbo B7 / Words Dan Goodyer / Photography AJ Walker /
Audi never sold a Misano red DTM A4, so Craig Collingworth built his own – with a top-mounted GT3076r and 500bhp under the bonnet for good measure!
At first glance you might think this is a factory-built B7 A4 DTM Edition with a set of aftermarket wheels. However, look a little closer behind those 19in BBS alloys... Large Brembo brake calipers from a Porsche Cayenne S hint there’s a bit more going on here than you might expect. If you know your quattro from your Quattro, you might also be aware that Audi never sold the DTM Edition A4 in this stunning shade of Misano Red Pearl. Or you might just have read that fact in the intro. Either way, colour is very important to the owner, 31 year old Craig Collingworth, a man who has sprayed cars for a living.
Craig bought the car around four years ago. It began life as a 2006 B7 A4 2.0 TFSI quattro Special Edition. Already a very nice car to have as a daily-driver, it had leather trim, lots of toys and a BUL engine with a K03 turbo pushing out around 220bhp. For three years Craig restrained himself from tuning it. He didn’t feel the need, only fitting the BBS wheels after finding them for sale on eBay at a ridiculously low price. Then in early 2014, Craig bolted a hybrid K04 to it, some S3 fuel injectors and a Unicorn Motor Developments remap – and recorded the second-fastest known quarter mile time in the world for a 2.0T A4!
He explains: “We started going to York Raceway for a bit of a laugh. Rick at Unicorn Motor Developments had re-flashed the ECU to make the engine produce 360bhp and 360lb/ft torque, and added launch-control and flat-shift. The surface at York isn’t great to be honest but we still managed a 13.4s at 101mph, which according to all the info we could find on the AudiSport and Audizine forums, was the second-fastest quarter ever recorded for a non-S 2.0-litre A4. Thing is, that just made me want to go faster.”
At the time Craig had bought a genuine DTM Edition A4 in need of a new engine. The plan was to source a new engine for it and then sell it. Then he had an idea: “I realised the BUL engine in my A4 was exactly the same as the engine fitted to the DTM, so I swapped it over and sold the DTM complete. They only ever made 250, so I really wanted to keep it on the road. Plus the money from the sale helped me set up my own company and part-funded the next step of the project.”
Craig had been working for Elite Customs in Leeds. Specifically, he was working for Elite Wheel Repair, using his painting skills to good effect. He then set up his own business on the same premises, CR Motorsport. Specialising in painting and drag racing to begin with, the company quickly grew to carry out engine work, servicing and more. His A4 would become the unofficial company demo car, so it needed a proper engine build.
To cut a very long story short, a lot of money was invested in a fully-forged S3 CDL engine that went bang. It featured trick parts including a set of pocketed pistons to allow the use of high-lift cams. However, Craig had out sourced the head-work, which included a set of oversized valves. He speculates some of the valves came into contact with each other, sparking a chain of events that wrecked the whole engine and turbo. Not wishing to be burned twice, Craig looked around for an alternative and found a proven engine for sale. It had been built by Rob at TSR Performance and was already making good power.
Using that engine as the base, the CR Motorsport guys went about doing something a bit different. Craig created the first top-mounted TFSI A4 in the UK by importing an AR Design exhaust manifold from the States. Onto this he placed a Garrett GTX3076r turbo built by Turbo Clinic, Craig adds: “The turbo recommendation came from Paul at Turbo Clinic. He’s been extremely helpful during the build and I highly recommend him. I ordered a 3in AR Design downpipe and had Tony Banks Exhausts in Leeds mate that to a Milltek Sport 3in system, featuring just one silencer box on either side of the rear bumper. On a dark night with the flat-shift switched on, you can see 4-foot flames shooting out the back of it and from the screamer pipe at the rear of the bay!”
While the car was off the road, Craig had also taken the opportunity to upgrade the suspension and brakes, along with fitting an OEM DTM bodykit that he resprayed himself. He explains: “The ride was very wallowy but I didn’t want to turn it into a stiff racecar, so I went for Eibach Pro Street coilovers and fixed anti-roll bars. The result is perfect in my opinion. The whole car feels like it’s factory-spec when driven normally, then transforms into a much more capable car as soon as you start pushing.”
He continues: “A lot of thought has gone into the car. I’m always on the Audi forums under the username “CraigCull”. Hours of research have gone into every aspect but with a very specific plan. The whole tuning thing is something I’ve been into for a long time, but I’ve only felt the need to act on it again in the past year or so. These days I’m into cars that look relatively standard – subtle, but with insane performance available, which I’d like to think I’ve created here.”
He’s not wrong. The mapping is still a work in progress but the car is already very quick, especially for a regular A4. Read the spec for some of the highlights; custom air intake that solves the heat-sink problem, custom breather system, a second set of injectors, water-methanol injection, the list goes on. At the moment it’s running two maps, both written by Rick at Unicorn Motor Developments. One for 25psi boost and around 450bhp, the other a 30psi map for around 500bhp.
With a bit more boost the engine should make 550-580bhp, that’s Craig’s aim anyway. Then it’s back to the drag strip to see if he can break some more records, and confuse more people with the only red DTM Edition in existence.
SPECIFICATION #Audi-A4-2.0TFSI-Quattro-Special-Edition-B7 / #Audi-A4 / #Audi / #Audi-A4-B7
ENGINE: CDL 2.0 TFSI S3 engine rebuilt and forged by #TSR-Performance including 83mm #Wössner pistons, Wossner connecting rods, 1.8T oil pump conversion, #Supertech valves and valve springs, #F-Tech-Motorsport inlet manifold with second set of fuel injectors, RS4 fuel injectors, fuel pressure regulator, in-tank fuel pump and controller. Autotech high pressure fuel pump, #Garrett-GTX3076r turbo with .63 a/r turbine housing and v-band clamp, #AR-Design top-mount manifold and 3in downpipe, #Milltek-Sport 3in exhaust with two rear silencer boxes and 2.5in tailpipes, TiAL Sport MVS external wastegate with screamer pipe, TiAL Sport 50mm recirculating diverter valve, custom front-mounted intercooler with 2.5in hard pipes, AEM Water/ Methanol injection, IE valve cover with vent-to-atmosphere catch can replacing pcv, N205 camshaft adjustment valve delete, N249 pressure control valve delete, inlet manifold runner flap delete, 3in MAF sensor, custom air intake, OEM ECU re-flashed by Rick at Unicorn Motor Developments with 4 switchable maps.
TRANSMISSION: 6-speed manual gearbox, #APR / Southbend Stage III clutch and single mass flywheel conversion, USP short shifter, launch control and flat-shift.
BRAKES: 6-pot Porsche Cayenne S 18z #Brembo calipers up front with machined ML55 345x14mm grooved and drilled discs, S4 rear brake conversion including single piston floating calipers and 300mm drilled and grooved discs. Pagid Fast Road pads all round, braided lines.
SUSPENSION: #Eibach Pro Street coilovers, Eibach front and rear anti-roll Bars.
WHEELS & TYRES: 8.5x19in BBS CH009 alloy wheels wrapped in 235/35x19 Michelin Pilot Super Sport tyres.
EXTERIOR: DTM Edition OEM bodykit including carbon fibre rear spoiler, Misano Red Pearl paint.
INTERIOR: #Audi-A4-Quattro-B7 Special Edition leather trim.
TUNING CONTACTS/THANKS: Rick at Unicorn Motor Developments, Paul at Turbo Clinic, Dave and Martin at Elite Wheel Repair, Rob TSR.
Above: quattro helps get the power down.
Above: Calipers are from a Porsche Cayenne S Bottom: A4 is around 250kg lighter than a B7 RS4 and more powerful!
Left and below: Craig has equipped his A4 with a genuine DTM Edition bodykit, including the carbon fibre rear spoiler.
Below: GTX3076r turbo provides ample boost to create a claimed 500bhp.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationAPR S5 ROAD TEST #Audi-A5 based #2014
DRIVEN: APR S5
We test this 480bhp #Audi-S5-APR
We head out for a road test in APR Tuning UK’s S5… The supercharged 3.0 V6 is one of those engines that responds fantastically well to tuning. We ran a full guide back in Issue 4, so when the guys at Awesome GTI invited me to experience their own project, I was keen to see how it performed. This particular S5 belongs to APR UK’s, Wayne Ainsworth. It’s a 2014 model and has been treated to a select few upgrades to increase power.
As the UK arm of #APR-Tuning , the S5 is running their Stage 2 software. This has been developed to work in conjunction with the popular supercharger pulley upgrade, together with the supporting hardware upgrades of a full APR exhaust system and Carbonio intake.
I’ve driven several stock #Audi 3.0Ts, in S4s and S5s, so I have a good feel for how they respond in factory tune. The plan was to take the S5 out on a series of town and country roads to see how the upgrades alter its character.
The S5 is one of those cars that you instantly feel at home in. The driving position is spot on (once I’d adjusted the seat for my little legs!) and everything feels very high quality and easy to navigate. First thing that hits me is the extra urgency. The merest dab of the throttle delivers rapid progress and you’re soon up to the speed limit. But the software has been designed to really deliver its knockout punch when you hammer the pedal. Once there’s a clear stretch of road, I floor it and see what happens. I have to say I’m a bit taken aback; the acceleration is savage. From 20mph, the S5 just grips and goes as we fire up the road reaching the limit in seconds. We try it again at other speeds and it seems, no matter what speed you’re doing, or what gear the S-tronic happens to be sitting in at the time, this S5 will just deliver a massive slug of torque that pins you back in your seat.
It’s a different sensation to the twin turbo punch of a tuned C6 RS6, but it feels instant, as if we’ve just increased the capacity of the engine. The noise is pretty special too.
The ’charger creates a spine tingling whine that is further enhanced by the performance exhaust and induction kit sucking in air.
Having spent time driving the S5 on a variety of different roads and conditions, we pull over on a quiet back road to try the launch control.
As with all modern S and RS models running the S-tronic gearbox, a full-bore launch is easy to achieve. Simply put the shifter into Sport, then left foot on the brake, right foot on the gas and then release the brake.
I’ve been a passenger in many cars that have been launched hard, but this one takes me by surprise. The ferocity with which this things hooks up and chucks us down the road is mind blowing. It’s not the sort of thing you’d want to subject your car to on a regular basis perhaps – after all it puts the transmission under immense strain – but it demonstrates just how capable this APRtuned S5 is.
Power has been dyno’d at a very respectable 480bhp, which in these days of 700+bhp RS6s and the like may not sound huge. But take my word for it, the way this power is delivered is what makes this car truly fast. Let’s not forget that this is a lightly tuned, S-model coupe with stock internals, a full interior and all the other refinements you’d expect.
Once you drop the hammer, there’s not much that’d keep up on real roads – that epic combination of quattro and S-tronic maximising the potential of every one of those 480 horses.
This is a deeply impressive package that’s testament to the work that APR Tuning puts into testing and development. If you own an S5, it’s something you should seriously consider.
Engine 3.0 #TFSI V6 supercharged, #APR Stage 2 software, #APR RSC exhaust system, APR Carbonio intake, Stage 2+ supercharger pulley upgrade
Brakes S5 (Vagbremtechnic big brake kit in development
Suspension #H&R sports springs
Wheels and Tyres S5 with 15/20mm spacers
Tuning Contacts APR Tuning UK www.goapr.co.uk
Above: This S5 is savagely quick Below: APR Carbonio intake is only real give away.
Left: Interior is refined Above: APR RSC exhaust frees up some more power and sounds great.
Stream item published successfully. Item will now be visible on your stream.