- Post is under moderation/ #BMW / #Alpina-B10-3.3-Touring / #Alpina-B10-3.3-Touring-E39 / #Alpina-B10-E39 / #BMW-E39 / #BMW-E39-Alpina / #BMW-E39-Touring / #BMW-5-Series / #BMW-5-Series-E39 / #BMW-5-Series-Touring / #BMW-5-Series-Touring-E39 / BMW / #Alpina / #AC-Schnitzer / #Air-Lift-Performance / #Air-Lift / #BMW-E39-Air-Lift
E39 Touring’s arches swallow the #Alpina-Classics with ease. Lows when you want them, sensible ride height when you don’t.
RYAN’S E39 ALPINA B10 3.3 TOURING
I’ve been living a #LIFEONAIR for just about a month now and I’m loving every minute of it. Aside from a very, very angry bunch of Alpina enthusiasts sending me hate mail and calling me out on the Internet, life with the bagged B10 couldn’t be simpler.
I’d forgive you for thinking that by adding extra airlines and another management system the suspension system might become susceptible to leaks and a bit, well ‘modified’. That’s absolutely not the case and it’s actually much more robust than the OE BMW SLS system. Granted, the BMW SLS only runs on the rear of the car and allows self-levelling to the fixed front axle but the pump size is puny and tank capacity equally small. The two #Viair 444c pumps included in the Air Lift Performance kit are never stretched to fill the two, two-gallon tanks and everything runs at about 40% duty. Thanks to the quality of the Air Lift Performance front bags and leader lines there’s been absolutely no leaks from the get-go. This was helped by the thorough instructions included in the kit that would allow even a relative amateur to install the kit with ease.
Since the install I’ve covered some 2000 miles in the car and it’s very much been a fi t and forget affair. I’ve only lifted the factory E39 boot floor to show interested parties the trick setup lurking beneath. Driving the car at a sensible ride height, it’s really difficult to identify a difference in ride quality between the Alpina suspension and the Air Lift Performance setup. It sounds crazy, and I’m sure that statement will leave plenty of Alpina lovers chortling and shaking their heads, but it’s true though. Air Lift Performance 3H is such a sophisticated system that it can out-handle even the most coveted BMW suspension upgrade. Now that this car is on air there is no way I would go back to a static setup.
It’s the flexibility that strikes me the most. It’s already a hugely versatile car; it can carry big loads, has the heart of a true performance car and now it can party with the show crowd while remaining grown up and demure. Likewise, through town it’s possible to drive at a dangerously low height, usually not possible with a pressure-based system. This is because #Air-Lift-Performance-3H continuously monitors pressure and height and adjusts bag pressure to maintain ride height. This means it’s possible to have your wheels mere mm from the arches and not have contact, pretty fun for posing. Parked up at a slammed height the E39 can mix it with the best of them, however park it at ride height and no one is any the wiser. It’s also perfect for visiting the in-laws and avoiding awkward car questions from non-car relatives. For those reasons alone Air Lift Performance 3H is a game-changing suspension system and something I’m certainly pleased I plumped for on this project.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationLAGUNA E46 M3 Lush UK air-ride Cab
A schoolboy dream has become reality in the shape of a Laguna Seca E46 M3 Cab, with a few mods for good measure, of course. Words: Elizabeth de Latour Photos: Matt Dear.
DREAM WEAVER Air-ride E46 M3
Achieving your dreams, no matter how small and seemingly insignificant they may appear to some people, is an incredible feeling. From dream jobs, to dream weddings and, obviously, dream cars, these items, events and experiences fill us with sheer joy and make our lives better. Whatever your dream may be, achieving it, making it happen is a special moment; for Bally Hanspal this car was that dream and, as you can plainly see, it’s most definitely become a reality.
“BMWs have been a big part of my life,” begins Bally as we ask him to tell his tale, “with my late grandfather, dad and uncle all owning BMWs through my childhood. It always made me want one and, also, with how amazing they are to drive nothing else can come close to them. For me they really are the ultimate driving machines; despite owning other brands of cars I always seem to have a soft spot for BMWs,” he smiles, and that’s something we wager most of us can relate to.
Bally has dabbled with VAG in the past, ticking off the wheels, suspension and audio boxes along the way before moving towards the performance end of the modding spectrum, all of which served as perfect preparation for the inevitable purchase of his dream car. “When the E46 M3 was released, back when I was still in school, I promised myself I’d own a Laguna Seca blue one, one day. Many people laughed, but it was a dream I had to make come true,” he says and that steely determination is what made it happen. Bally kicked BMW ownership off with an E46 320Ci Sport, the biggest engine he could insure at the tender age of 20, but it was just a stepping stone until he could get his hands on the full-fat, M-powered 3 Series of his dreams. “I remember the day when I bought the car so clearly,” he smiles, “a friend of mine phoned me up – it was a warm Saturday afternoon – and he phoned me asking if I had found any cars for sale. I mentioned I had seen this one for sale on Autotrader, not too far from me. He said ‘Let’s go down and take a look’ so we headed over and after just walking around the car and checking it over I knew this was the one for me. The condition of the car was tip-top and it was so well-maintained that I would have been kicking myself if I hadn’t bought it.”
There were, says Bally, no plans to mod the car when he first got it, and he actually thought that was going to leave the car alone but here we are, it’s in a modded BMW mag. It wasn’t long, he says, before he started ordering parts for his M3 and he didn’t mess about. Wheels came first, with a set of CSL 19s chosen and to go with those he picked out a custom set of BC Racing coilovers to deliver the required drop. With the E46 M3’s natural good looks now nicely enhanced, Bally turned his attention to the audio system and fitted an Alpine double-DIN head unit along with a set of MB Quart component speakers front and rear, which made it into the car’s current build state. So too did the amber corner lights, which look great against that bright, bold blue bodywork, and Bally has also fitted a seriously sexy set of K-Sport brakes, with monster eight-pots up front wrapped around 365mm discs and four-pots at the back, and the red calipers really pop against the body and wheels.
All was going well, but Bally wasn’t in a good place with his suspension. “The BC coilovers were pretty awesome I must say, but with the car not being practical with the way I wanted it the next step was air. After speaking to many people and reading many reviews I went for Air Lift’s 3P setup and I also added Powerflex wishbone and anti-roll bar bushes just to tighten-up that awesome drive.” Now Bally can enjoy all the lows he can eat, so to speak, while still being able to actually drive the car and we like the fact that he’s also done a little bit more than just the bags alone, to allow him to really get the best out that awesome chassis that the E46 M3 is blessed with.
With air on board, Bally decided it was time to up his wheel game but with so many good-looking wheels available for the car, this was not an easy task. It was helped slightly by the fact that he’d always had his eye on the wheels he’s ended up, that being a set of Schnitzer Type II Racing three-piece splits, and they are gorgeous, the metallic grey centres really suiting the whole colour scheme on the car. Where people often go big on diameter, Bally has stuck to a sensible 18” but he’s gone wide; the fronts are a reasonably large 9.25” but the rears are a monster 11.25” across and they fill the arches to bursting, and with it aired out the fitment is perfection.
As far as styling is concerned, Bally has had the front bumper smoothed and it’s been enhanced with the addition of a full carbon fibre CSL front splitter, which not only adds a healthy dose of visual drama but also drops the car even further towards the Tarmac. Moving inside, that vibrant interior didn’t start out life this way and the original seats have made way for a striking red ensemble; “I wanted my M3 to stand out from the rest,” he says, “and after looking at many options it had to be the red Nappa leather, giving the car the Super Man look,” he grins and now it all makes sense. But here too there’s more than meets the eye, and where you might, perhaps, expect to see carbon on a car like this you will instead find that all the interior trims have been finished in Alcantara. “The trims are my favourite mod on the car and they were something I had in mind for a while, but it was a big problem getting them done, with so many companies saying they couldn’t do it and that it couldn’t be done. In the end my dad and I, along with my grandmother, did them together,” and the end result is absolutely unique and wonderful with it. Finally, in the boot, you will find the single air tank and Viair compressor that make up the air ride and, a neat touch, is that with the boot lid being de-badged, the air tank now wears the M3 badge instead.
As far as performance mods are concerned, Bally has so far just added a gorgeous GruppeM carbon intake up front and a de-catted Scorpion exhaust system but it sounds like the next big mod on the to-do list is a supercharger and going by his determination and refusal to give up with any part of the build so far, you can be sure that’s going to happen before too long. There’s no rush though, Bally has no plans to let his dream car go anytime soon; “After now owning the car for two years I’d say it’s an on-going going project that will probably never end,” he chuckles. Bally’s built himself an absolutely beautiful M3, one that’s packed with neat, unique touches that really make it stand out and it’s a car he can truly be proud of. Dreams can come true.
GruppeM carbon fibre intake the only performance mod, for now…
Gorgeous 18” AC Schnitzer Type II Racing splits.
“I wanted my M3 to stand out from the rest and after looking at many options it had to be the red Nappa leather, giving the car the Super Man look”
Alpine double-DIN head unit and custom Alcantara trims.
Red Nappa leather looks fantastic against bodywork.
Custom-mounted Air Lift controller.
Air install has been kept simple and the air tank now wears the M3 boot badge.
TECHNICAL DATA FILE #BMW-E46 / #BMW-M3 / #BMW-M3-E46 / #BMW-M3-Cabrio / #BMW-M3-Cabrio-E46 / #BMW / #BMW-3-Series / #BMW-3-Series-E46 / #BMW-3-Series-M3-E46 / #BMW-3-Series-M3 / #BMW-3-Series-Cabrio / #BMW-3-Series-Cabrio-E46
ENGINE AND TRANSMISSION 3.2-litre straight-six #S54B32 / #S54 / #BMW-S54 , #Scorpion exhaust system with de-cat, GruppeM carbon air intake, six-speed manual gearbox, short-shift kit
CHASSIS 9.25x18” (front) and 11.25x18” (rear) #AC-Schnitzer-Type-II-Racing three-piece wheels with 215/35 (front) and 245/35 (rear) tyres, #Air-Lift-Performance-3P air suspension, #Powerflex wishbone and anti-roll bar bushes, #K-Sport #BBK with eight-piston calipers and 365mm discs (front) and four-piston calipers and 330mm discs (rear) / #AC-Schnitzer-Type-II / #AC-Schnitzer / #Air-Lift-Performance
EXTERIOR #Laguna-Seca-Blue , smoothed front bumper, amber corner lights, gloss black front and side grilles, carbon fibre full CSL front splitter, CCFL angel eyes
INTERIOR Red Nappa leather seats and door cards, Alcantara-trimmed dash, door grab handles and centre console, #Alpine double-DIN head unit, #MB-Quart components front and rear
THANKS A massive thank-you to my family for the support and help putting it all together, Adam and Dav down at Autobahn for the fitting of many parts, Ryan at Ryandetails for the amazing job on the detailing of the paintworkStream item published successfully. Item will now be visible on your stream.
- Post is under moderation/ #ACS8 / #AC-Schnitzer-i8 / #BMW-i8 / #BMW-i8-AC-Schnitzer / #AC-Schnitzer / #AC-Schnitzer-ACS8 / #BMW-i8-Schnitzer / #BMW / #2017 / #BMW-i8 / BMW / #BMW-i-Series / #2017
There’s no doubting that the star of the show as far as the #BMW-tuning companies were concerned was AC Schnitzer’s take on BMW’s i8. This example looked absolutely stunning in its metallic red wrap along with a selection of Schnitzer carbon fibre embellishments. We’ve seen a #Schnitzer-i8 previously but the company now offers more carbon parts for the car with a new front splitter assembly and some additional cooling ducts behind the front wheels and to the rear of the rear wheel arches.
Sitting on lowered suspension and a set of trademark Schnitzer alloys it really did look absolutely eye-popping and it’s not hard to understand why the company’s programme for the i8 has been so successful – not only is it one of the few options on the market for those wishing to personalise their cars, but the fit and finish is second to none.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationRazzle Dazzle Wild, wide-body, air-ride E36 M3. Beneath the jarring geometric shapes and black-and-white lines, there’s a pretty astonishing M3 hiding in here. And the deeper you dig into its story, the more mystery and intrigue you unearth… Words: Daniel Bevis. Photos: Brian McGee.
The Zebra M3’. That’s a name a lot of people seem to throw at this car. But have you ever seen a zebra with stripes like this? That’d be one funky-looking equid. No, the style you’re seeing here is a retro mind-melter known as ‘dazzle camouflage’. We know what you’re thinking – camouflage is meant to blend you into the background, right? Like the traditional greens and browns of army gear, or the beige tones used for desert combat. But what can possibly be so jagged in black-and-white that you could morph with its style like this? Some sort of explosion in a print factory? No, the idea here is not simply to hide, but to hide in plain sight; to confuse and distort. Dazzle camo first appeared on ships in World War I, its deliberately interruptive patterns intended not to conceal the vessels, but to make it impossible to judge how big they were, how fast they were going, and how far away they were. And that’s why the offbeat camo works so well today on a wide-body Pandem E36 M3, and makes those three questions are easy to answer. How big is it? Very, thanks to those Rocket Bunny extensions. How fast is it going? Again, very – it’s an M3. How far away is it? Sweetheart, it’s totally in your face.
The act of being totally in your face is all in a day’s work for Carl Taylor, of course. He, as some of you will be aware, is the driving force behind the Players shows as well as a marketing superhero for Air Lift, and what he doesn’t know about badass show-stopping rides could be comfortably felt-tipped on the back of a postage stamp. The germ of the idea that led to this car in fact appeared back before Wörthersee 2014, when Carl and Rotiform’s Brian Henderson built a pair of E36 Art Cars with Rocket Bunny kits; a 323i and a 325i. “I loved driving that car, and I decided I needed to build another one once I moved to the States… but this time with more power,” he recalls. “So I bought an M3. I found it locally after I moved to California – it was in pretty good condition, the paint was sunburnt but that didn’t matter as I was planning to wrap it anyway,” he says.
Now, you don’t get to be the figurehead of an industry powerhouse like Players without having a few ideas buzzing around the ol’ brainbox – here’s a man who, after all, can count around fifty cars in his personal history with every single one of them being modified in some way or another – so of course he had a plan for the car. Its fate was written in the stars before he’d even hauled it back to his sun-drenched new home. “I’d broken up the Wörthersee car and saved some parts from that,” he explains. And before the scene knew just what had hit it, Carl was delivering a sucker punch at SEMA 2014 with a fresh, super-wide new build. It wore a minty green Tic-Tac race livery, chosen to emulate the Team Valier E30 M3 that used to race in the DTM, but caricaturised to be broader, fatter, meaner, scarier. The E36’s stock arches were unceremoniously savaged to allow the fitment of a full Sarto Racing kit, with non-M bumpers swapped on to flow more cleanly with the new lines. A set of colossal Rotiform ROCs filled the arches, resplendent in satin gold, and – inevitably, given Carl’s line of work – a top-of-the-range Air Lift setup found its way in. It had a full-on race car look inside; Cobra bucket seats, a rollcage, not a lot else. The effect was pleasingly startling, Carl’s decades-old coupé with its relatively short (but nevertheless superbly well-chosen) spec list more than holding its own against the show’s multi-million dollar builds. What’s key with projects like this, you see, is being relatable as well as aspirational. When you make something as awesome as the Tic-Tac E36, you can shift a lot of wheels, and air-ride kits, and seats, and bodykits, and… well, you know how the game’s played.
The game, naturally, never stops. Not for a second. So it was imperative for Carl to shake up the formula right away; the car would be returning to SEMA the following year, and it had to be rocking some significant changes. You can’t stand up on a Broadway stage and sing the same song twice. The next thing we knew, the broadhipped M3 was wearing a fresh Art Carinspired wrap, emulating that Wörthersee road trip that kicked the whole process off, along with a Rocket Bunny Pandem kit, a jarring set of Rotiform USF wheels (a sort of double-three-spoke affair, very retro JDM) and a raft of detail changes. The scene was set for the car to once again break necks and steal hearts at the world’s largest aftermarket tuning show.
Except that, as is his wont, Carl changed his mind at the eleventh hour. “Six weeks before SEMA 2015, I decided to change it a bit,” he says, dabbling masterfully in understatement. Indeed, you’ve probably spotted the car’s not dolled up like an oldschool Art Car in these photographs; no, we’re back at the dazzle camouflage motif we opened with. And there’s also a V2 Pandem kit thrown into the mix. This isn’t so much hiding in plain sight as just running up to people in the street and smacking them across the chops with an embroidered leather glove. If you want a fight, sure, this angry M3 is definitely spoiling for a rumble. “Being a sales manager for Air Lift Performance, I had to equip the car with the latest 3H system with Performance struts,” Carl reasons, “and we had Because Bags create a custom rollcage install for it too.”
This really is a sight to behold, the way the tanks and hardlines caress the cage like one of those terrifying metal spiders in The Matrix. It’s details like this that steal the SEMA headlines. “I only ever run Rotiform too,” he grins. “The design was left down to Brian Henderson, however I did choose the Corky Pink finish myself to add some colour to the car.” Yep, you certainly can’t argue with the logic of that. Those flashy fourspokes do stand out, don’t they?
“We’d just decided that we really needed to make a change if we were going to return to SEMA with the same car,” Carl shrugs. “We had the race car interior theme reworked with some custom Cobra Suzuka Pro seats, and the wheels came out perfectly, the finish is amazing – I think they’re my favourite part of the car. The rebuild took Vaderwerks around two weeks to finish up, with the kit install and then wrapping it and setting the air up with the new wheels. Everything worked out perfect.”
Now, it’s probably time to address the elephant in the room. SEMA 2015 was a little while ago… so why are we featuring the car now, in 2017? Well, this ‘zebra’ evolution was only one step of many along this everevolving car’s path. Things have happened between then and now. Important things. “The car was sold before we were even back from SEMA,” Carl admits. “Someone heard about the project and made an offer, so it was time for something else. I regret selling this car, to be honest, as after all the work it looked the best ever.”
But he needn’t be sad, as the car’s latest curator isn’t one to rest on his laurels or let the grass grow. Dylan Coleman is the name to watch – you may know him as @hawaiianeze on Instagram – and he’s a man with more than a few plans. Dylan’s set up a pretty astonishing business in Hollywood, you see: he and his father, Lee, are the brains behind StreetFighter LA, and they’ve been working with the fabled Long Tran at LTMW to kick out some pretty mould-breaking builds. “I was looking for another project to start after we parted with our #ProjectHulk Liberty Walk Challenger,” he explains. “I’d come from a BMW background, and the E36 M3 has always been one of my favourite models. While looking around for potential cars, our friends at Rotiform Wheels contacted us and just so happened to know someone who was looking to sell…”
Yes, Sherlock, that person was Carl. So Dylan was cruising around LA in one of the world’s best-known BMW builds. That must have felt pretty good? “Well, yes and no,” he says. “We brought the car back to Los Angeles after SEMA, where I started to use it as a daily driver while we were finishing up some other projects. But although the car was a great build that caught the attention of everyone on the road, I never truly felt the connection like I did with my past projects; with high mileage and a stock engine it was time to look to start rebuilding or swapping the engine…”
But that, friends, is another story for another day. You’ll just have to keep an eye on your favourite BMW modifying magazine for the next chapter. For now, however, let’s leave Dylan basking in the glory of Carl’s achievements, sprinkling on some of his own unique blend of magic, and formulating his plan of attack to take this iconic build to the next level. Hiding in plain sight? Boy, it sure is dazzling.
TECHNICAL DATA FILE #Wide-body #Air-ride #BMW-E36 / #BMW-M3 / #BMW / #BMW-M3-E36 / #BMW-3-Series / #BMW-3-Series-M3 / #BMW-3-Series-E36 / #BMW-3-Series-M3-E36 / #Rotiform / #Air-Lift-Performance / #Air-Lift / #BMW / #BMW-M3-Wide-Body / #BMW-M3-Wide-Body-E36 / #BMW-E36-Wide-Body / #BMW-E36-Art-Car / #BMW-Art-Car / #BMW
ENGINE AND TRANSMISSION Stock #S52B32 / #S52 / #BMW-S52 3.2-litre straight six, full #Magnaflow stainless steel exhaust system, #K&N induction. Five-speed manual gearbox, welded diff
CHASSIS 17” #Rotiform-RBQ wheels in Corky Pink with 235/45 (front) and 255/40 (rear) Toyo R888 tyres, full #Air-Lift-Performance-3H airride System
EXTERIOR #Rocke-Bunny-Pandem-V2 wide-body kit with #Downstar fixings, custom-designed 3M wrap by JD Wraps installed by #Vaderwerks , #AC-Schnitzer mirrors
INTERIOR #Renown steering wheel, custom Cobr a Suzuka Pro seats, #Wiechers roll cage, custom Because Bags roll cage-mounted #Air-Lift install
THANKS Gino the Master Sepe at Vaderwerks, Brian, Jason and the Rotiform team, Mark and Adam at Cobra Seats, James and Ken at Because Bags, Corey and all my Air Lift Colleagues, Russ and Erik at JD Wraps, Paul Kitch at 3M, Stan at Toyo Tires, 714 Tires, LTMW, Magnaflow, and Renown
“I had to equip the car with the latest 3H system with Performance struts”
“The wheels came out perfectly, the finish is amazing - I think they’re my favourite part of the car”Stream item published successfully. Item will now be visible on your stream.
- Post is under moderation’CHARGED Z3 M Track-focussed monster. Words: Elizabeth de Latour. Photos: Patrick Lauder. From bone stock to supercharged autocross monster, this Z3 M Coupé has spent 14 years becoming the best machine it can be.
Supercharged / #BMW-Z3M-Coupe / #BMW-Z3M-Coupé-E36/8 / #BMW-Z3M-E36/8 / #BMW-Z3-E36/8 / #BMW-E36/8 / #BMW-Z3M / #BMW-Z3M-Coupe-Supercharged / #BMW-Z3-Supercharged / #BMW-Z3M-Coupe-Supercharged-E36/8 / #BMW-Z3 / #BMW-Z-Series / #BMW-Z-Series-E36/8 / #BMW
In America they call it the clown shoe; in the UK we call it the bread van but whatever you choose to call it the Z3 Coupé remains an incredibly special and unique machine. #BMW attempted to recapture the magic of its quirky miniature shooting brake with the E86 Z4 Coupé and while it was arguably a better car, it was also a lot more conventional and lost a lot of the appeal of its quirky forebear. Being unconventional may have caused people to fall in and out of love with the Z3 Coupé throughout its life but standing out from the crowd has most definitely worked in favour of the eye-catching machine and that is exactly why Grant Gillum ended up buying this car.
“I wasn’t a BMW guy per se,” Grant begins, “but I knew they made a quality product. As college was ending I began researching nice used cars to purchase after graduation. I wanted a front engine, rear-wheel-drive car that could be modified and used for autocross and track days. It would also be my daily for a while. After considering several cars including Corvettes, Camaros, Porsche 944s and 928s, the Pontiac GTO (not a used car at the time), Datsuns and Nissans of many years and models, I decided on an E36 M3. I liked the styling, the daily sensibilities and the aftermarket availability. They were also uncommon and more exclusive. All that changed the day that I saw a Z3 Coupé in traffic,” he says. “I had seen a million Z3 Roadsters and wasn’t really interested in a convertible. But this was different and I wasn’t even sure what I was looking at. I certainly didn’t recognize it as a Z3. It had a BMW logo so I started researching all their models, eventually finding information on the M Coupé. All the engine of an M3 but lighter, with a factory wide body, staggered wheels and a look that was comparable to some exotics. Sold. I had to have one,” he smiles. “It took nine months of scouring the internet to find the right one.
I bought a 22k mile example, bone stock but for a Dinan CAI and a stage one tune and still under warranty. I bought it sight unseen except photos and had it shipped cross country. I realized right away too that the M Coupé was a limited production run vehicle and so would be a cheap way for a blue collar guy to own something special. I bought the car knowing it would be a lifelong project car. I’ve known plenty of grey haired dudes that sold the hot rod of their youth and regretted it the rest of their lives. Not me. Hopefully,” he adds.
Unlike other owners who buy their cars and start out with no plans for modifying, Grant knew he was going to mod the Z3 and knew exactly which direction he wanted to take it in. “I wanted to race it right away and joined an autocross club soon after buying it,” he says, and his passion for autocross is shared by his wife. “Six years ago she came with me for a day at the track. She rode along on a couple runs and decided to give it a try. Except when pregnant, she’s raced in nearly every autocross event that I have since then. Averaging our times to a 60 second run, she’s about a half second off me. She’s been as close as a tenth second off my time. I’m much more of a fundamental driver, she drives much more by the seat of her pants. As soon as she tightens up her fundamentals, she’ll beat me,” he says. While you can take any car to an autocross event, if you’re serious about this particular form of motorsport, as Grant is, then your car will need to be modified and in a focussed way that will enable you to get the most out of it, which is why virtually everything he’s done to his Z3 has been all about making it a more finely-honed, precision autocross instrument.
It’s also why the supercharger that you can see strapped to the side of the engine came last and everything else came first as the chassis, handling and dynamics were the priorities here.
Wheels and tyres were the first items on what would become quite an extensive shopping list and while aesthetics do obviously play a part, lightness was mostly the deciding factor as far as wheel choice was concerned. “I went online and found the lightest wheels I could for the car,” explains Grant. “I bought a set of OZ Alleggerita HLTs in 8x17” and 8.5”x17”. They were light at less than 17lbs (7.7kg) per corner and dropped considerable unsprung weight over the stock wheels and I converted to wheel studs too.
I ran those wheels for a couple of autocross seasons before switching the rears to the front and widening the fronts to 10” and putting them on the rear. Now they weigh 16.8lbs (7.6kg) and 17.9lbs (8.1kg) front and rear; they are light, strong and handsome,” and what more could anyone ask for from a wheel? “I also run a set of 8x18” and 9x18” ASA AR1 wheels with black centres and 2” and 3” polished lips front and rear on the street,” he adds. The 17s really suit the Z3, as you can see in the photos, especially with the fat sidewalls of the super-sticky BF Goodrich g-Force R1 tyres filling out the arches and those tyres let you know that this M Coupé means business.
With lightweight wheels and track tyres taken care of, the next item on Grant’s to-do list was the suspension, and while he started off small, things quickly escalated. “I started with H&R springs and kept them for a few years until they sagged,” he says, “then I switched to Ground Control coilovers and adjustable spring perches. But not before modding the anti-roll bars with reinforcements, adding differential reinforcements, rear shock mounts, sub frame reinforcements and rear camber and toe adjustments. Then I poly bushed it followed by aluminium control arms.
“Disaster struck at the autocross one day when the diff pulled away from the subfloor and the rear end went squishy,” says Grant. “I thought that one of the rear anti-roll bar end links had given way. That’s how I got a tube frame rear subfloor that is way stiffer than the stock car ever thought of being. I love the coilovers, of course, but the single greatest suspension mod was poly bushing the rear subframe. It really changed the way the car transitioned weight in-corner to being much more predictable,” he says. As is often the case when it comes to modding, when things go wrong, break or fail, rather than just replacing them you upgrade them so, as with his boot floor, when the clutch started to slip Grant fitted an F1 Racing stage two clutch and 14lbs chromoly flywheel as well as a stainless steel clutch line and then added a UUC short shift kit and double shear selector rod plus a Z3 2.3 steering rack. Further drivetrain upgrades include a poly differential bush, UUC aluminium engine and transmission mounts and a rebuilt diff with four clutch zero preload and 80/60 ramping, polished ring and pinion gears and a 3.64 final drive in place of the standard 3.23 item. “Before the supercharger, lowering the final drive was a really dramatic NA mod. It went a long way to help pull me out of slow second gear turns,” explains Grant.
With the suspension and drivetrain taken care the Z3 was a far sharper machine but now the car’s stopping abilities needed to be addressed. “When I started doing a lot of track days it was apparent that the stock brakes were not up to long days of abuse,” he says. “That’s when I did the brake conversion and ducting. What a difference and zero fade. I didn’t go too big on the disc diameter as I was concerned with reducing as much rotational weight as possible, as autocross is more of a low speed competition.” The Z3 now wears Wilwood six-pot Superlite front calipers with 330mm GT-48 floating discs and Wilwood Dynalite four-pot rear calipers with 312mm lightweight discs and Wilwood B pads allround, while the ducting ensures that the brakes receive plenty of cool air to deliver peak performance at all times.
Having carried out all the groundwork to make sure that all aspects of the chassis and drivetrain were at peak performance, Grant could now turn his attention to extracting more power from the engine.
Unlike our Euro-spec Z3 M models, the US cars were fitted with the S52B32 engine, based on the M52, which had to make do with 240hp and 236lb ft of torque so it’s no surprise that Grant wanted to up these numbers. “I started with keeping the engine NA and wanted to let it breathe better,” he says. “I upgraded the cooling system with a rad, water pump thermostat and cover immediately. I kept the CAI and did the M50 intake manifold exchange and I also did the BBTB at the same time. A cat-back exhaust followed and a year later came exhaust manifolds and a mid-pipe. In general I would wait until OE parts needed replacement and would upgrade at that time; that way the financial hit of modifying was lessened by taking the money I would be spending on OE parts and putting that towards upgrades.
I replaced all the water hoses throughout and the oil cooler followed when I started doing more track days, as I live a 40 minute drive from Thunderhill Raceway here in California. While on track there one day the bottom radiator hose slipped off and started spewing out coolant; I realised it had happened within seconds but even though I coasted into the pits the water temp gauge showed hot and that’s how I got the new head and I went to under-driven pulleys then as well.
“After the rest of the car was pretty modified I bought the supercharger kit. I had become a dad and my wife wanted me to do less high speed track driving and just drive autocross, so after close to two dozen track days at Thunderhill my focus changed with regard to driving. I needed just a little more low-end torque to pull me out of slow second gear turns when I didn’t want to shift to first gear at autocross,” and the supercharger kit has certainly given Grant the grunt he was after. It’s an Active Autowerke Stage 1 kit with a Rotrex C38-92 supercharger and is accompanied by numerous supporting mods. “I removed the air con, replaced the alternator, installed the power steering cooler, did the oil pan/pump upgrade and fitted an ATI Super Damper, crank pulley and carried out a CCV delete with the supercharger kit,” he says. “The baseline dyno when I bought the car was 205hp and 203lb ft of torque at the wheels; the NA mods took that up to 230whp and 222lb ft and it now makes 312whp and 262lb ft at the wheels on the same dyno. Active Autowerke claims that this kit makes 360hp on a stock car; I’ve done a lot of other work to the engine, so if they want to claim 360hp I want to claim somewhere in the 380hp range,” says Grant. “That seems excessive, though, and I usually just quote my dyno numbers,” and that’s still plenty to enjoy both on road an track, and a huge increase over stock.
While Grant has focussed mainly on the performance and dynamic elements of the car he has not forgotten about aesthetics, both inside and out. The exterior as been enhanced with Motion Motorsports front splitters and aluminium undertay, a one-off AC Schnitzer rear diffuser centre section, the roof spoiler has been raised by 8mm to enhance the roofline and Grant’s also fitted black kidney grilles, black lower mesh grilles and carbon-look roundels among other things. The interior, meanwhile, has been treated to a Momo Competition steering wheel on a quick release hub, chrome handbrake handle, E46 M3 short shift gearknob, black leather gaiter with tricolour stitching and M Tech pedals and dead pedal. There’s also a H3R black HalGuard fire extinguisher, but this was added as a necessity following a scary incident…
“While testing the car after installing the M50 manifold a fuel hose wasn’t secured completely and popped off and sprayed fuel over the exhaust manifold,” says Grant. “Thank god the car wasn’t warmed up all the way and only billowed white smoke. I pulled over immediately and ran. It continued to smoke for a long, heart-pounding five minutes. I fitted the fire extinguisher after that,” he says.
Grant’s Z3 is a focussed build that’s been taken in a specific direction and the results speak for themselves. While it looks great it’s the changes that you can’t see and that we can’t experience or appreciate that make this car. It’s the vast amount of chassis work, the brakes, the hundreds of seemingly minor secondary mods that are so important for the success of the whole and which all add up to make a such big difference. This Z3 has evolved hugely during the 14 years that Grant has owned it, from autocross machine to track monster and back to autocross beast but this time with the wick turned way, way up, becoming more and more focussed at each stage and it’s not reached its final form just yet…
“In the not-too-distant future this car will retire from competition after nearly 80,000 miles that saw it driving to almost monthly autocross events (10 months a year). I have a pile of class win trophies adding, in my small way, to BMW’s racing heritage. I’ll paint and mount the new bumper and splitters I have waiting. I’ll delete the fog lights and the antenna for a cleaner look. At that time I’d also like a nice set of multipiece step-lipped wheels,” he nods, painting an attractive picture. At that point it’ll become a different animal altogether but whether or not that will be its final stage of evolution will remain to be seen…
TECHNICAL DATA FILE #Supercharged E36/8 Z3 M Coupé / #Active-Autowerke-Stage-1 / #Active-Autowerke / #Rotrex / #VAC / #Dinan /
ENGINE 3.2-litre straight-six #S52B32 / #BMW-S52 / #S52 / #S52-Supercharged , #UUC engine mounts, Active Autowerke Stage 1 supercharger kit with #Rotrex-C38-92 supercharger, CAI, 3” MAF, High flow Bosch fuel injectors, supercharger oil cooler, AA stage 1 programming for BBTB and M50 intake with 7k redline, polished supercharger bracket, #ATI-Super-Damper , #VAC-lightweight crank pulley, #Dinan big bore throttle body, M50 intake manifold and fuel rail cover, intake runner heat shields, Dr. Vanos stage 2 kit with cam gears, timing chains and solenoid, Turner shorty ceramic coated exhaust manifolds, ARP header studs, fiberglass manifold and exhaust wrap, SAS Racing dual 2.5” mid-pipes with stock cats, dual 2.75” Supersprint stainless cat-back exhaust, #BMP design exhaust tips, #VAC oil pump upgrade, VAC oil pan baffle, #Behr S54 E46 triple row radiator, 80° thermostat, power steering cooler, Stewart high-flow water pump with steel impeller, polished aluminum thermostat housing, polished aluminum water pump nut, 80/88º fan switch, Spal 16” electric puller fan, clutch fan delete, new overflow tank, BMP brass water bleeder, VAC 5x7” oil cooler with polished Euro oil filter housing, stock head gasket, #ARP head studs, head polished and gasket matched, new valve guides, lashes, locks and retainers, valve job, resurfaced head, hydraulic belt tensioner, CCV delete, new Valeo 115 app alternator, AC delete, radiator baffle.
POWER and torque 312whp and 262lb ft wtq
TRANSMISSION #ZF-Type-C / #ZF five-speed manual gearbox, #F1-Racing 14lbs chromoly flywheel and stage 2 clutch, stainless clutch line, UUC short shifter and double shear selector rod, poly differential bush, UUC aluminium transmission mounts, rebuilt diff with four clutch zero pre-load and 80/60 ramping, 3.64:1 final drive, polished ring and pinion gears
CHASSIS 8.5”x17” (front) and 10x17” (rear) #OZ-Alleggerita-HLT / #OZ wheels with 255/45 (front and rear) BF Goodrich g-Force R1 tyres, #Ground-Control front coilovers with Koni adjustable shocks, Eibach 500lbs front springs and 600lbs rear springs, Ground Control adjustable rear spring perches, Ground Control front camber and caster plates, #Racing-Dynamics 21mm front and 19 mm rear anti-rolls bars and end links, SAS Racing rear anti-roll bar reinforcements, #SAS-Racing differential reinforcements, SAS Racing rear shock mount reinforcements, Turner Motorsport aluminium and poly rear upper shock mounts, Ireland poly control arm bushes, #Turner front subframe reinforcements, Ireland poly rear trailing arm bushes, Turner rear camber and toe adjustments, 90mm rear and 75mm front lug stud conversion, E30 M3 polished aluminum control arms, Turner front hub extenders, Ground-Control bump stops, SAS Racing tube frame rear sub-floor, Z3 2.3 steering rack, #Wilwood sixpiston Superlite calipers with 330mm GT-48 floating discs with aluminium hats (front), Wilwood four-piston Dynalite calipers with 312mm lightweight discs (rear), Wilwood B pads (front and rear), stainless brake lines, Turner front brake backing plates and duct work, SAS Racing vented rear brake backing plates, new master cylinder and reservoir
EXTERIOR Arctic silver, Motion Motorsports front splitters and aluminium undertay, #AC-Schnitzer one-off rear diffuser centre section, OEM fog light kit, rear roof spoiler adjusted up 8mm and colour-matched, polished wiring harness brackets, door jamb stickers removed, carbon-look roundels, passenger wiper delete, HID headlamps with side markers and corner lamps colour matched, stealth turn signal bulbs, tinted tail lights, colour-matched wiper nozzles and hatch latch, black kidney grilles, black mesh lower grilles, rear wiper delete, clear front corner markers, front plate holder delete, new windscreen and exterior mouldings
INTERIOR Black and grey two-tone leather interior, Momo 350mm Competition steering wheel with hub, 15 mm spacer and adaptor, carbon-look roundel, Snap-off Industries steering wheel quick release hub, chrome handbrake handle, E46 M3 short gear knob, M Tech pedals and dead pedal, front and rear M logo floor mats, E36 M3 window button surrounds, black leather gaiters with tricolour stitching, windscreen and window tints, sun visor stickers removed, glove box facelift, carbon horn pin adapter, H3R black HalGuard fire extinguisher, poly seat bushes, custom rear hatch parcel shelf
Thanks My wife, for her all patience and participation. Jerard Shaha at SAS Racing, my 30-year mechanic and friend. He rebuilt my El Camino in 1987! SAS Racing has done all the work on this car over the years. Their specialty is racecar setup but they perform all mechanical work and fabrication to an expert level as well as engine building and auto transmission rebuilds (email@example.com). Jason Shaha, my childhood best friend and Jerard’s brother. Thanks for planting that competitive seed from your family into me. See you at the next race? The long-standing crew at Trinity Touring Club. Thanks for your loyalty to our sport and dedication to our club. If I didn’t have to drive 90 minutes each way I’d be at all the club meetings (trinitytouringclub.com)Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationRYAN’S ALPINA B10 3.3 TOURING / #Alpina-B10-3.3-Touring / #Alpina-B10-3.3-Touring-E39 / #Alpina-B10-E39 / #BMW-E39 / #BMW-E39-Alpina / #BMW-E39-Touring / #BMW-5-Series / #BMW-5-Series-E39 / #BMW-5-Series-Touring / #BMW-5-Series-Touring-E39 / #BMW / #Alpina / #AC-Schnitzer / #Air-Lift-Performance / #Air-Lift / #BMW-E39-Air-Lift
It’s no secret that the E39 self-levelling suspension (SLS) is the weak link in the otherwise robust E39 Touring package. A quick Google search unveils tales of woe from across the globe, with many owners cutting their losses and reverting back to conventional coil sprung rear suspension. I thought that even if I bought a car with working SLS it would soon fail, so I found one where the owner had already replaced the rear air bag units. This repair was, of course in vain, and the rear suspension still proved to be problematic for him, an excellent haggling point. My plan was to retain these factory rear air bag units and convert the management system to an aftermarket setup with new high flow compressors, increased capacity air tanks and matching air suspension struts on the front.
An extreme fix you might think, but with the current advancements in air suspension technology it’s actually a worthwhile upgrade over the coveted Alpina suspension that had covered almost 120,000 miles so far. Knowing that Air Lift Performance is right at the cutting edge of air ride management systems with its new 3H, height sensing, self-levelling system I began to dig deeper. I was adamant that I would keep the self-levelling aspect of the suspension but I have to admit, I also wanted to be able to slam the car at the touch of a button.
The area of East London that I live in is peppered with speed bumps and every flavour of traffic calming device possible, so for an every day car that I wanted to be comfortable, look cool and handle well, the Air Lift kit was hard beat. With both a controller and a mobile app with Bluetooth capability, the Air Lift Performance 3H manifold allows for a huge range of mounting options. This was great news for me; I could take full advantage of 3H technology without modifying the interior of the car to mount the handheld controller. I plan to stow the controller in the centre console of the B10 while utilising the 3H app to make on-the-fly adjustments as I like, perfect for switching from drive height to an extended speed-bump-climbing height. I really wanted a quiet and powerful setup that could easily be stowed away below the E39’s boot floor; I didn’t want it to be obvious that the car was on aftermarket air and wanted a fast-filling setup that retained the whole boot load capacity.
After speaking with Air Lift Performance’s technical team I opted for dual #444c compressors, both with isolator kits and two two-gallon tanks. The small tank sizes allowed the best chance to squeeze all of the Air Lift components into the spare wheel well. The twin #Viair-444C compressors allow for a fast tank fill and quiet operation, especially when using an Air Lift Performance compressor isolator kit. Keeping with an understated Bavarian feel, I opted for an all-black finish and everything was delivered in super quick time! With everything removed from the car, I started planning the install. Having a good idea of where everything would go I made a base for the components to mount. Luckily, because of the factory self-levelling rear suspension, the car had ample space to create a tidy spare wheel build. I adapted the original #BMW rear air bags to work with Air Lift Performance’s 3H management system and used the factory sensor locations to mount the Air-Lift-Performance-3H sensors. Admittedly it was a little bit of a suck it and see experiment, with a metric to imperial conversion for the air lines being a very interesting challenge. All of the Air Lift Performance products come with step-by-step instructions to guide you through the install so there is absolutely no guesswork required. By following these guidelines, I was able to prepare the components for a hassle-free install. I say I, what I mean is my good friend Steven Doe did.
He’s already got an Air Lift Performance bagged E21 and his knowledge with air ride installs was invaluable during this process, cheers Doey! During reassembly with the new Air Lift Performance components, we could follow the torque specification chart to ensure a safe and long-lasting install first time around. The same instruction booklet shows the best practice for removal of the OE shock absorbers too, meaning you don’t need a fully equipped workshop in order to install the new system, just basic tools and a general understanding of safe working practices. I can’t wait to show you how this looks aired out, it’s insane!Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationFun Factory AC Schnitzer M240i tested. AC Schnitzer works its magic on the wonderful M240i Coupé. AC Schnitzer has taken one of BMW’s finest cars, injected it with an additional dose of adrenalin and the result is an exceedingly impressive miniature missile. Words and photography: Steve Hall.
Here at BMW Car, we’re huge fans of the M240i, which is no surprise really considering the level of affection we developed for the M235i, which like any good relationship, just got better the more time we spent in its company. Handsome, compact coupé, powerful sonorous engine up front driving the rear wheels; it’s a recipe that would be difficult to get wrong with such good base ingredients.
So 2016’s enhancements, which arrived when the 235 became the 240, were only ever going to deepen our desire for it. Adding 14hp and 37lb ft to a model which wasn’t exactly slow off the mark (that torque figure matches the M2) only serves to demonstrate what a fabulous engine the B58 is, combining more performance than the M235i’s BMW-N55 with greater efficiency, all the while allowing the driver to enjoy the – now unique in this class – pulsating straight-six music rendered by the B58’s machinations. At £36k it’s a hard package to beat.
It’d be fair to say we’re fans of Schnitzer too. We realise this won’t come as a shock. With an expansive (and expanding) range we’ve had plenty cause to visit Aachen this year, and are consistently left thumbing our dictionary looking for new superlatives to sprinkle into our road test assessments. It’s on a fine run of form, hitting that sweet spot that can prove the downfall of other tuners; delivering an OEM standard of quality in a package that offers tangible benefits. So dispatching an M240i to the Schnitzer skunkworks should result in a very special package…
Our final trip to Aachen of the year may be cold, but the forecast is bright and sunny. And with the whole day devoted to this shoot we’ve plenty of time to get to know the ACS2 4.0i. So it's a good thing our guide for the day did some diligent research (thanks Mario!) and has found some terrific roads for us to play on; one stretch in particular snaking its way along, then up a tree-lined mountain – the kind of road you imagine local petrolheads carving their way up and down in the quiet hours.
This being Germany, we have a good few kilometers of autobahn to blast down before we reach black top more akin to a British B road (okay, with a significantly better surface) and some towns along the way to explore every facet of the ACS2’s performance and dynamics. First though, lets take in some details, starting with the element which will most irk M2 owners; the small matter of an additional 60hp and 75lb ft of torque…
There has been much forum debate about the performance of the M240i vs the M2, given that the bona fide M car has 30hp more, identical torque and 30kg more weight. Factor in the M240i’s narrower shape and less aggressive aero and it’s easy to see why separating the junior car’s straight line performance would take a stopwatch marked in thousandths of seconds, and it’s debatable which car the exercise would favour. After Schnitzer has worked its magic, the stopwatch can safely be dispatched as the sheer thunderous energy the ACS2 demonstrates in the mid-range leaves you in no doubt: an M2 would be easy meat. With power and torque curves much the same as the standard car, power delivery mirrors the M240i – mid-range grunt swells as soon as 2000rpm is registered, by 4000rpm we’re really motoring, and the straight-six happily rips round to its 7000rpm redline with increasing vigour. But that 75lb ft of extra shove makes its presence felt everywhere, whilst the additional power sees the final flourish to the redline take the ACS2 into very senior company.
Schnitzer realise the extra horses with its tried and tested method of an additional control box which (as with last month’s M3-based ACS3 Sport) sits atop the existing ECU and manipulates the controls to allow an increase in boost pressure, whilst being easily and invisibly reversible. That Schnitzer backs this with its own two-year warranty speaks volumes for the thoroughness of its testing programme. It explains why its claimed power figures are consistently backed up in independent testing, which isn’t something that can be said for every tuned car on the market…
There’s a typical thoroughness to the Schnitzer approach in every element of the ACS2; the aesthetic updates address one of the few areas where criticism could be levelled at the M240i, and gives the 2 Series visual attitude to back up its performance. Not so much wolf in wolf’s clothing (that’s left to the M2), but for some there’s not enough to differentiate 218i from an M240i – not so with ACS2. The M240i’s demure aesthetic could be considered a selling point, but we think Schnitzer has struck a terrific balance by dressing the 2 Series in a smattering of high quality carbon trim pieces to complement its signature fivespoke AC1 forged alloys and the lowered ride height. As befits the Schnitzer way, many of these confer subtle aerodynamic improvements have been verified in the wind tunnel. The differences may be marginal, but when you’re driving a 400hp coupé on a road devoid of speed limits, any added high-speed stability is a welcome addition.
Stability is aided by the Schnitzer suspension package which sits the ACS2 45mm and 50mm (front and rear respectively) closer to the ground, and waives the adaptive dampers in favour of a passive system which is mechanically adjustable in bump and rebound. The factory setup is so well judged, we doubt many will utilise the adjustment, but it’s nice to know it’s there. Some may be surprised at the omission of a locking differential even as an option, but in reality the few who would really make use of such an option are well served by some of the wilder Schnitzer products; and as we will see, this doesn’t stop the ACS2 being an absolute blast to drive on the right roads…
Thoroughly warmed up from our sojourn through the suburbs, we join the autobahn with the ACS2 ready to demonstrate the full extent of its straight-line performance. There’s a few kilometres of built-up ‘bahn to negotiate before the derestricted sign hoves into view, during which the #BMW-M2-AC-Schnitzer-ACS2-F87 proves itself just as adept as any 2 Series Sport at low speed cruising.
We leave the speed limit behind primed in third gear and take the opportunity to indulge in what seems to be a popular past-time in Germany – full bore acceleration when entering derestricted zones.
It’s something the ACS2 4.0i is extremely well equipped for, punching hard with acceleration seemingly unabated as we charge through fourth and fifth gears. Unfortunately, it’s a bit too busy to explore the upper reaches of the speed spectrum, but the point is made – you’re going to need an M3 to stay in touch.
We’re now on the roads I’d really been looking forward to. Roads which play well to the 2 Series’ compact size. We’re rolling on Continental Winter- Contact tyres, which may rob the ACS2 of the final percentile of precision, but do nothing to detract from the sweet balance innate to the chassis. All of the usual M240i traits are in situ, with the volume turned up to 11. There’s more precision, more control and more grip to manage the extra performance and on this road, winding its way up the hill interspersing 180 degree switchbacks with short straights, the ACS2 is indulgent fun. Traction proves surprisingly good, but with 443lb ft underfoot it’s easy to overwhelm the rear tyres at will – at which point the #ACS2 remains a faithful, enjoyable folly. Buoyed by the crackle of the Schnitzer Sport exhaust, I take a few more runs up and down the hill than necessary; it’s that kind of car on this kind of road…
But then, what else were we expecting? The marriage of Schnitzer’s talents and the M240i make for a five star car; of course they do. Every element of potential critique in the M240i has been addressed, so you have a more visually alluring package that sounds better, goes better and is a more pleasing place to sit thanks to the array of Schnitzer interior trim parts. And whilst we understand that the cosmetics are not to everybody’s taste, if we were to pick and choose, the performance and chassis elements are absolutely worth having, taking the M240i on to a level of performance and driving enjoyment to worry an M2.
CONTACT: AC Schnitzer UK
Tel: 01485 542000 Web: www.ac-schnitzer.co.uk AC Schnitzer (Germany)
Tel: +49 (0) 241 5688130
All of the usual M240i traits are in situ, with the volume turned up to 11. There’s more precision, more control and more grip to manage the extra performance
TECHNICAL DATA FILE #AC-Schnitzer-ACS2-4.0i-Coupé / #ACS2-4.0i-Coupé / #AC-Schnitzer-M240i / #2017 / #BMW-F22 / #BMW-M240i-Coupé / #BMW-M240i-Coupé-F22 / #BMW-M240i-F22 / #BMW / #AC-Schnitzer-ACS2-4.0i-Coupé-F22 / #AC-Schnitzer-F22 / #BMW-2-Series / #BMW-2-Series-F22 / #BMW-2-Series-Coupe / #BMW-2-Series-Coupe-F22 / #BMW-M240i-AC-Schnitzer / #BMW-M240i-AC-Schnitzer-F22 / #AC-Schnitzer / #ACS2-F22 /
ENGINE: Twin-scroll turbo, straight-six, 24-valve / #BMW-N55 / #N55 / #N55-AC-Schnitzer /
MAX POWER: 400hp @ 6000rpm
MAX TORQUE: 443lb ft @ 3000rpm
0-62MPH: 4.6 seconds
50-120MPH: 8.6 seconds
TOP SPEED: 155mph (limited)
ENGINE: AC Schnitzer performance upgrade (additional control unit) AC Schnitczer engine optics
ENGINE: AC Schnitzer tailpipe, Sport black
WHEELS AND TYRES: AC Schnitzer AC1 BiColour wheels, 8.5x19-inches (front and rear) with 235/35 R19 Continental WinterContact tyres all-round
SUSPENSION: AC Schnitzer ‘Racing’ package, lowered 45mm at the front and 50mm at the rear, adjustable bump and rebound
STYLING: AC Schnitzer carbon front spoiler elements, upper rear spoiler, carbon rear spoiler, carbon fibre wing mirror covers, rear skirt protection film
INTERIOR: AC Schnitzer aluminium pedal set and footrest, handbrake handle, key holder and floor mats
The thunderous energy the #AC-Schnitzer-ACS2 demonstrates in the mid-range leaves you in no doubt: an M2 would be easy meat.Stream item published successfully. Item will now be visible on your stream.
- Post is under moderationRYAN’S ALPINA B10 3.3 TOURING / #Alpina-B10-3.3-Touring / #Alpina-B10-3.3-Touring-E39 / #Alpina-B10-E39 / #BMW-E39 / #BMW-E39-Alpina / #BMW-E39-Touring / #BMW-5-Series / #BMW-5-Series-E39 / #BMW-5-Series-Touring / #BMW-5-Series-Touring-E39 / #BMW / #Alpina / #AC-Schnitzer
When looking for a new car I had a pretty strict features filter that candidates would have to pass to be eligible to appear in my eBay watch list. They would have to be an estate or 4x4 for load capacity, have an automatic gearbox, a split tailgate and ideally air suspension. Bonus points were given for a smooth and punchy engine that could top 25mpg. Most vehicles fell foul of the split tailgate criteria and when coupled with the other items on the list it began to seem as though it would be nigh-on impossible to replace my overland prepared Land Rover Discovery 3. That is until I began to look at E39 540i wagons…
These were at the lower end of the budget but a nice Sport version was a very attractive proposition indeed. I’d owned an E39 M5 a few years ago so the E39 platform was already a familiar one. The only problem for me was how common they were. I like to have a car that’s a little leftfield and it’s about this time I got interested in my neighbour’s Alpina B5S Touring.
This supercharged V8 E61 Touring was very much a wolf in sheep’s clothing, packing 530hp as stock! This was what daily driver dreams are made of and I immediately began to search for Alpina B5 Tourings. I searched and searched, to the point where I thought he was making up the model – I simply couldn’t find one for sale. I did spot a pair of E39 B10 3.3 models however. One was a lot more tired than the other but more importantly both were fitted with what is essentially an over-bored US E36 M3 engine that produces 280hp in the estate body. Best of all, they retained the rack and pinion steering unlike V8 models and ticked every one of the features on my checklist. After seeing both examples for sale I plumped for the better, more expensive of the two, the silver E39 you see in these pages.
It’s not all been plain sailing for the car so far however, after a baptism of fire at the Forge Action Day at Castle Combe the alternator gave up the ghost. Initially presenting itself as a gearbox fault and intermittent hesitation I feared the worst. Luckily this car was a lifelong Alpina registered car with a paperwork file larger than most of my actual office filing. Thumbing through the clues I noticed it had had a new battery every year for the past few, hinting at a sluggish alternator. After a short AA truck trip to Southampton the car was fixed up at Regal Autosport in under an hour with a new alternator.
While I was there I decided to check the 280hp claim on its in-house dyno. We were all pleased to find the car made 279hp and sounded great too! This is just the start for the B10 though – I’ve lined up some awesome mods over the next few months and I’ve already installed some retro #AC-Schnitzer-mirrors .
Perhaps not true to the Alpina bloodline but I’ve always loved the shape, so much so I actually bought them en-route to purchasing the car. Next up is to fix the slightly leaking factory rear air suspension, but perhaps not in the way you might expect…Stream item published successfully. Item will now be visible on your stream.