1997 Plymouth Prowler

A brave effort that took the ‘hot’ out of hot rod


FORGOTTEN FAST CARS

Plymouth’s brave Prowler ‘hot rod’ looked the part but failed to deliver


You might recall the wild Plymouth Prowler concept of the mid-1990s, a retro throwback to hot rod culture. Except the Prowler wasn’t a concept, it was a fully fledged production car, of which 11,702 were built between 1997 and 2002. It’s remembered as a bit of a flop, critically and commercially, but there’s more to the story than that.


1997-Plymouth-Prowler

1997 Plymouth Prowler

Let’s start with the bad. The bold design successfully paid homage to cars like the Ford Model A, but many hot rod enthusiasts were left alienated by Chrysler’s decision to use a V6 engine and four-speed automatic gearbox. The V6 was chosen to improve efficiency and meet crash regulations.

Despite weighing just 1280kg, the Prowler, initially at least, wasn’t particularly quick. The 3.5-litre SOHC V6 produced 160kW/300Nm for a 0-60mph (97km/h) claim of 7.2sec. Plymouth claimed an electronically limited top speed of 190km/h, which was academic because during testing Car & Driver found the Prowler was aerodynamically limited to 188km/h, though it beat the 0-60mph claim at 7.0sec.

A little more potency arrived in 1999 with a high-performance aluminium block version of the 3.5 producing 189kW/339Nm. This cut the 0-60mph claim to 5.9sec and lifted the top speed to 203km/h. However, Chrysler itself addressed the Prowler’s criticisms with a concept unveiled at the 1999 SEMA called the Howler, which packed a 4.7-litre V8, five-speed manual and elongated tail for luggage.

Boot space in the Prowler was virtually non-existent, a problem partially solved by the option of a matching trailer. Trouble is, the trailer added another USD$5000 to a car that already cost more than a Chevrolet Corvette.

While not particularly successful, the aluminium-intensive Prowler was an important research and development tool, parts of its chassis being adhesively bonded like a Lotus Elise. To Chrysler, the lessons learned about lightweight construction were more important than sales figures.

ABOVE It’s safe to assume we’ll never see another production car like the Plymouth Prowler, at least from a volume manufacturer. Today’s regulations just wouldn’t allow it.


ENGINE 3518cc V6, SOHC, 24v

MAX POWER 160kW @ 5850rpm

MAX TORQUE 300Nm @ 3100rpm

0-62mph (0-100KM/H) 7.4sec (estimate)

PRICE NEW USD$43,000

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

RECOMMEND BLOGS

Previous article2021 Audi RS6 Avant C8
Next article1982 Feora