Link copied to your clipboard
Items tagged with #BMW-E82
Pinned Items
Recent Activities
  • Stream item published successfully. Item will now be visible on your stream.
  •   David Gerhardt reacted to this post about 2 years ago
    DARREN’S E82 DRIFTER / 118d / #BMW-E82 / #BMW-118d / #BMW-118d-E82 / #BMW / #BMW-118d-Tuned / #BMW-1-Series / #BMW-1-Series-E82 / #BMW-118d-Tuned-E82 / #BMW-1-Series-Coupe / #BMW-1-Series-Coupe-E82 / #BMW-118d-Rebuild / #BMW-118d-Drift-Car

    Recently we have been working on the turbo front pipe and wastegates. It’s not been an easy task and I’m unsure if anyone else has been able to make a 3.5” front pipe fit in N54 E82? Never mind a RHD one! There is zero room on this side of the engine bay and I now understand why people who make manifolds choose a smaller diameter pipe, but why would we make this easy for ourselves?!

    We were short on room and there was no way we could fit the front pipe in the engine bay without doing something, so we had to notch the chassis leg to make a little bit more room. Some people may frown upon this but it doesn’t bother me in the slightest; it’s still structurally sound and we used a section of 4” pipe for the notch and it worked out perfectly to fit the front pipe in.

    Once we got it past the chassis leg we still had to get it around the manifold and engine mount; it took a bit of time to suss out which way was best, also bearing in mind the flow aspect. Most of the bends are made up of small sections of straight pipe and pieced together as part of a lobster tail and doing it this way we could get the bends perfect. The second 40mm wastegate is now in place as well, which just leaves the screamer pipes to complete, which I’ll be doing very soon.

    We have now managed to get the exhaust all tack welded together and once we get time it will be Tig welded and covered in heat-proof wrap; to be honest the exhaust manifold has seemed to take forever and I’ll be glad to see the back of it but it was a must to get it complete so we can move forward with the build.

    Once the manifold and front pipe are complete, we are going to concentrate on completing the front panel. We have decided it’s best to do a hybrid between the stock front panel and a steeltubed front end, this way we can house all the coolers and charge cooling equipment but keep the stock mounting points for the front bumper and headlight brackets etc.

    We have taken a huge decision to remove all the direct port injection and stock management from the N54 and some may ask why? I just feel like we have the skills to make an inlet manifold and use ‘conventional’ injection that allows us to remove the high pressure pump (which everyone seems to have issues with) and all the DPI and stock management. This will allow us to use a stand-alone management system and no restrictions when it comes to tuning the engine. It’s possible it could be a bad move but I can’t find anyone that has done this yet, so it’s a bit of a stab in the dark. So, next on the list, weld the manifold, build a front panel and make a custom inlet manifold. Thanks to Pete for his time and effort helping me with build.

    Turbo front pipe required a notch in the chassis leg.

    Wastegates now in position.
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Darren Rickaby reacted to this post about 3 years ago
    Steve Wright #BMW-E82 / #BMW-1M / #BMW-1M-E82 / #BMW / #BMW-1-Series / #BMW-1-Series-Coupe / #BMW-1-Series-E82 / #BMW-1-Series-Coupe-E82 / #DMS


    Having enjoyed a 135i for a little while, Steve says he recently upgraded to his dream 1M, adding he’s hoping prices stay strong. We don’t think he’s got anything to worry about. He’s over the moon with his machine and while he’s not been too heavy-handed with the modifications he has added some carbon fibre bits and a #DMS-remap , which has taken power up to 425hp, plenty to be getting on with, and he’s considering a mid-pipe modification to add a bit more exhaust volume to proceedings. A recent Euro tour around the Alps allowed him to really stretch the 1M’s legs and it sounds like he had a blast which cemented his love for his dream machine.
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Dale Drinnon reacted to this post about 3 years ago
    4.6 V8 1 SERIES Totally transformed 135i

    SLAKE THE INTERNET

    What started out life as an unassuming 135i is now a fire-breathing, 1M-kitted, 4.6 #V8-powered beast.

    It’s an inescapable fact of modern modifying that if your car becomes known online, everyone will have an opinion on it. But this is a good thing – use the love as inspiration, use the hate as fuel, and keep pushing forward… Words: Daniel Bevis. Photos: Courtney Cutchen.

    “People have very interesting reactions to my car, it sparks a lot of discussion,” says Marco Svizzero, the chap standing proudly beside this rather perky little 1 Series. “It’s an entirely modified bastard, and yet it still seems to appeal to the purists…”

    This is a pretty punchy way to set out your stall – after all, that quasi-mythical entity of ‘the purists’ is a notoriously hard bunch to please (although goodness knows why you’d want to try), so to shoo away the perennial spectre of internet hate by appealing to the very people you expect to annoy is something of a fortuitous crapshoot.

    Still, objectively – at least, objectively from a PBMW point of view – there’s nothing not to love about this car, given that it’s effectively an M3 stuffed inside a #BMW-1M-Coupé-E82 to create the ballistic #V8-1-Series that BMW didn’t think to experiment with. That’s a great way to get into our good books. “This was really my first big car build, and I never intended for the project to go so far,” Marco ponders with the measured consideration of somebody who’s been on a lengthy adventure and is struggling to come to terms with the notion of being home again. “It just snowballed, and once the project got some traction on the forums and partners like Revozport and Performance Technic got involved, it all went to another level.”

    This, of course, is the price of notoriety. Once news of your project starts to spread, and the myriad chattering keyboards of the internet start to throw a few opinions around, there really is only one way forward: go big. The ‘go home’ alternative just isn’t an option at this point; the world is watching, you’ve committed to something, you have to see it through. Your audience insists. You’ve got new fans now, they need to be appeased. And the haters? Oh, there’ll always be haters. They need to be figuratively smacked down with the iron fist of decisive action.

    “I chose a 135i as the base for my project as I really like the size of it,” Marco explains, “and I love how tunable the N54 engines are. It’s so easy to get reliable horsepower out of those motors with simple modifications.”

    You’ll have spotted, however, that the N54 straight-six is no longer in residence. That’s sort of the point of this car now. So what gives, why did Marco change his mind? “Well, as I was taking the car on track more and more, I started to run into heat issues,” he says, “so I decided to swap a V8 motor and M3 chassis into the car.”

    Okay. We’ll just let that sink in for a moment, shall we? It really is a masterstroke of lateral thinking, taking such a decision and following it through, and he’s earned the right to be charmingly self-effacing about it. Most people in this situation would have thought along the lines of ‘alright, we have some cooling issues, let’s look into revising the coolant system, maybe upgrade the radiator and intercooler and open up some more vents,’ but not Marco. Oh no. One suspects that he wanted to shoehorn an M3 inside his #BMW-135i-Coupe all along.

    “I wanted the instant throttle response of a naturally aspirated engine, as well as robust cooling and an 8600rpm redline,” he says matter-of-factly. Well, yeah, swapping in an E9x M3 under the skin is the obvious solution, isn’t it? It was foolish of us to even question it. Carry on, Marco…


    “The swap is so much more than just the motor,” he elaborates, as if trying to justify it to an irate spouse or suspicious bank manager. “It’s the M3 steering, the complete front and rear subframes including the suspension and axles, the diff, the brakes, and cool features like M Dynamic Mode.”

    And there, as the Bard might say, is the rub. If you were skimming through a forum post and looking at photos of Marco’s car, you’d be forgiven for thinking that the story here centred around a non-M 1 Series that had been converted to 1M aesthetics. And to a degree, you’d be right, as that is what has happened – what started as a stock 2008 135i bought from Craigslist soon ballooned into a broad and angry 1M clone, its strong look accentuated by the exemplary body addenda on sale from Revozport, its Raze series offering a lightweight bonnet, bootlid, carbon fibre roof (which neatly deletes the 135i’s sunroof), splitter, diffuser and GTS wing. But the body, as we know, is only half the story.


    The fun of building something like this, particularly something that’s so keenly observed online, is that there will always be ill-informed haters to bait. ‘It’s not a proper #BMW-1M ,’ they’ll say. ‘Why spend all that money on making a fake 1M when you could just buy a real one? Why pretend, why lie?’


    Marco takes all of this in his stride, with a wry smile and an eye perennially on the next phase of development. “No, it’s not a 1M, and it will never be one,” he says. “The only way to get a real one is to buy one. My car will not bear an M badge on the trunk!


    Besides, by crunching numbers for a partout and sale of my car and using those funds toward purchasing a 1M, I would have to add a lot of money on top for a very similar car.” But forget mathematics, that’s not why we build project cars. A car is just a big hole to throw money into, we don’t modify them because it’s sensible. No, the unspoken truth here is that Marco’s car isn’t a 1M because, well, it’s an M3. It just looks like a 1M…

    “When we started looking into donor M3s, they were still expensive here in the States so I actually ended up buying a car in the UK, which was dismantled and sent to me in pieces,” Marco recalls. “Once everything was sent over, Performance Technic began the build. The most difficult part was the wiring; Performance Technic has two BMW Master Techs – Matt Medeiros and Wing Phung – who tackled the project, and once the car was built we brought it to Mike Benvo of BPM Sport. Benvo cleaned up, coded and tuned the car – he is another very valuable partner in the entire project. His knowledge in coding is unmatched! These guys were extremely focused on making everything look and operate like a factory car, and I applaud them that they pulled it off.”


    As well as being OEM-quality in terms of all the buttons and gizmos, and thus eminently streetable, Marco was certainly having a lot of fun with his transformed 135i, with its 4.0-litre S65 under the bonnet and M3 underpinnings. Let’s not forget that this V8 isn’t a lazy rumbler like those of his domestic heritage; while Detroit thuds, Bavaria howls, and this engine is a proper screamer. “It really was just like a smaller, lighter E9x M3 – the naturally aspirated 1M I wanted to make all along,” Marco grins.

    Wait… “was”? “Yeah, I decided to go a bit over-the-top,” he laughs. “The S65 only weighs 15lb more than the N54 so the factory balance was still spot-on, but after a little while I swapped the motor out for a Dinan 4.6-litre stroker motor.” Well, you know what they say about how power corrupts. And absolute power corrupts absolutely. Marco seems to be pretty happy about that.


    “It really is my perfect BMW and I couldn’t be happier,” he beams. “I enjoy the car at the track, taking it to the major BMW West Coast events, rallies, and simply staring at it in my garage! It’s a car that when people see it at events, they stop and look at it – often for a long period of time. Even with the old-skool purists; I’ve received a lot of compliments from the older, more traditional BMW crowd.” This makes sense really, as it is a pure BMW at heart: a focused driver’s machine, and with nearenough undiluted factory DNA under the skin. It just happens to be suffering a smidge of body dysmorphia, that’s all.


    Again, this can be the price of notoriety. Marco’s car has always enjoyed the internet spotlight, from its early PR tie-in with Revozport to those fledgling days on the show scene before the hungry swarm of smartphone lenses, to Performance Technic’s high-profile endeavours to make the first V8-powered E82 in the USA. Then there was its triumphant Bimmerfest showcase on the Toyo stand, the countless online profiles, the numerous show awards, the online video reviews espousing its virtues as ‘the best BMW you could possibly build at any price’, the Time Attack entries, the world-first stroked S65 conversion… this car lives in a fishbowl, its every move observed and analysed. And every barbed comment that curveballs toward it gets knocked out of the park.

    We’ll leave the final thought to Performance Technic founder Joey Gaffey: “This car is a project that we all kinda fell in love with. It’s a project we thought was probably something the engineers at BMW Motorsport thought of themselves…” And that, in essence, is the thinking behind Marco’s original idea for the madcap swap, and also why the purists love this impure creation. It’s a car that #BMW should have built. Thanks to the ingenuity of these fellas, it now actually exists, albeit as a one-off. The internet demanded results, and it got ’em. What a time to be alive.

    I enjoy the car at the track, taking it to events and simply staring at it in my garage!


    DATA FILE 4.6 #V8 #BMW-135i / #BMW-135i-E82 / #BMW-E82 / #BMW-135i-V8-E82 / #BMW-135i-V8 / #BMW-135i-S65 / #BMW-135i-Dinan / #BMW-135i-Dinan-S65 / #BMW-135i-Dinan-S65-E82 / #BMW-1-Series / #BMW-1-Series-E82 / #BMW-E82-Dinan / #BMW / #CAE-Ultra / #VAC-Motorsports /

    ENGINE AND TRANSMISSION Dinan 4.6-litre stroker #S65 / #BMW-S65 / #S65B46 #V8 / #S65-Dinan / , #BPM-Sport custom tune with 8600rpm redline, #iND custom plenum, Dinan intake, Dinan pulley, VAC-Motorsports baffled sump, #Black-Forest engine mounts, #Akrapovic axle-back exhaust, custom X pipe, #Braille 21lb battery, CAE Ultra shifter, OEM M3 differential

    CHASSIS 10x18” (front) and 10.5x18” (rear) ET25 HRE 43 wheels with 265/35 (front) and 275/35 (rear) Toyo R888 tyres, M3 front and rear subframes including suspension and axles, #PSi-Öhlins Raceline coilovers, #Racing-Dynamics anti-roll bars, #Dinan-Monoball kit for front control arms, #Bimmerworld rear wishbones, Dinan adjustable toe arms, Turner MS transmission bushings, #Turner-MS aluminium subframe and diff bushings, Dinan carbon fibre strut braces, #Stoptech-Trophy-BBK with 380mm (front) and 355mm (rear) discs, OEM GT4 brake ducts

    EXTERIOR Full 1M body conversion, Revozport 1M Raze bonnet, boot and lip, carbon fibre roof, splitter with APR splitter supports, diffuser and GTS wing, Macht Schnell tow straps


    INTERIOR #BMW-Performance V1 steering wheel, gaiters and carbon fibre trim, #BMW-1M-E82 armrest delete, #Recaro-Profi-SPA seats, #Revozport #BMW-1M Raze doorcards with Alcantara inserts, P3 vent gauge, OEM 1M Anthracite headlining and pillars (for sunroof delete), #TC-Design harness bar, #Schroth six-point harnesses, #VAC hardware and floor mounts, Alumalite rear close-off panel


    THANKS Joey Gaffey, Matt Medeiros, Wing Phung and the rest of the team at #Performance-Technic , Charles Wan at Revozport, Mike Benvo at BPM Sport, Stan Chen at ToyoTires, Jason Overell at Targa Trophy, DTM Autobody and Sam at AutoTalent
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Dale Drinnon reacted to this post about 3 years ago
    Mild-mannered 120d transformed into #V8-powered 1M Monster.
    SMASHING! Body shock!

    What started out life as a humble #BMW-120d is now unrecognisable following its transformation into an awesome V8-powered 1M, finished in Java green and with an M DCT gearbox. From mild-mannered 120d to hulking V8-powered 1M, this 1 Series has undergone an incredible transformation and the results are astonishingly spectacular. Words: Elizabeth de Latour. Photos: Matt Woods.

    Subtle is fine. Subtle works when you just want to get on with stuff discreetly, blending into the background and going unnoticed and unbothered. But sometimes, you need to be unsubtle. Sometimes you need something to wake you up from the dull, grey drudgery of life. Sometimes you need a Java green V8-powered smack in the mouth. That time is now.

    One might argue that Nina Barber’s 1M is subtle; there is, for example, no wild wing, no outrageous wheels, no vents or bulges beyond those which the 1M was created with, and even the exhaust is surprisingly civil. But a 1M finished in shocking green, and it really is very green, with a V8 numberplate is car that wears its heart on its sleeve. And we’re all for that.

    Nina is a woman who grew up in an environment filled with people passionate about cars, so it’s easy to how she’s ended up here, talking to us about her V8 1M. “I started to become passionate about cars in my early 20s,” she says. “My uncle races Porsches, my dad has always been into Lamborghinis and American muscle cars, and my mum has always had BMWs – which is what got me into the marque. She had an E30 when I was born followed by some M models. I remember the first time I drove a BMW, her BMW, I felt at home and knew that’s where I belonged. My first BMW was a 130i, which replaced an MX-5. That was a lot of fun to drive but I wanted more power and speed and after driving my mum’s 130i I knew I had to have one. After the 130i I bought a Z4 M, a car I’d always wanted as whilst I was growing up my mum owned a Roadster. It was very nice but compromised. So I started thinking about what to get next?

    An S54 Z3 M or E46 M3 CSL? Maybe, but prices were so high and you can’t put miles on those cars without harming their value, and while I’ve always loved the E92 M3 I prefer smaller cars…” We think you can see where this is going.

    “I followed Sebastian online. He owned the blue V8 1M that Ashley at Quarry Motors had built and originally owned, and I realised that was the car I wanted. I approached him about buying it and it turned out he was emigrating so it seemed like the perfect opportunity. Unfortunately we didn’t have much time to try and arrange a sale and it fell through but a friend of mine knew the guys at Quarry so approached them on my behalf to see if they’d be willing to build another V8 1M. I travelled up to Sheffield, met Ashley, had a chat and decided on the spot to go ahead with the project.” For this build, Nina was very specific about what she wanted, a fullyloaded car with DCT. The following day, the perfect M3 donor car showed up on Quarry’s doorstep. The planets had aligned…

    The car you see before you started out life as a 120d; the original Quarry car was built from a written-off 118d, but Nina wanted hers to be built from a straight car and it was actually sourcing the right 1 Series to build on that took some time. The entire project was handled by Ashley at Quarry from start to finish, leaving Nina to concentrate on working out the particulars.

    The most stressful part of the whole build was trying to decide on a colour. “I’ve never been so indecisive about anything in my life!” she exclaims. “I must have changed my mind about 20 times. Initially I considered a Lamborghini colour, then a Porsche colour, but then I decided I wanted a BMW colour. For ages I was set on Taiga green but after seeing James’ Java green M4 at a show I instantly knew that was the colour I wanted.

    Taiga is nice but it’s paler and is better suited to a boxy classic car. Java is perfect for a modern shape like the 1 Series and really suits the car.” She’s not wrong, as that intense Java is a full-on smack in the mouth, an eye-widening shot of sheer colour. And in the sunlight it’s even more fantastic, the colour drenching the bodywork and accentuating all of the curves. And there are a lot of those to accentuate on a 1M.

    The colour was the inspiration behind the car’s name, by which it is best known on social media. “I wanted to name it and was talking to Ashley about it when he suggested Bruce, as in Bruce Banner, the Hulk’s alter ego. I love this concept, the dichotomy of character, and it ties in with the green colour, so it was perfect.”

    While Bruce was being constructed, it also gave Nina the opportunity to finalise her pans for the interior: “I had considered different colours like red and tan, but then I wouldn’t have been able to do the green accent stitching that I’ve got now. It really lifts the interior, as without it I was worried it would all be too dark.” B-Trim in north London handled all the interior work and the end result is fantastic, the black being the perfect partner for that vibrant green, both inside and out, and the colour-coded detailing is the perfect finishing touch. The door panels, instrument binnacle, which houses the E9x M3 dials, and steering wheel have all been wrapped in Alcantara and both the heated front seats, plucked straight from the M3, and rear seats have Alcantara accent strips. The gear selector and start button surrounds have been finished in Java green and so too have the extended aluminium gearshift paddles on the steering wheel and even the seatbelts are green, while the carbon trim echoes the carbon elements on the exterior. “I didn’t want a half-done interior,” says Nina. “I decided to go all-out and do it right first time. It was the same with the whole car. It had to be complete out-of-the-box. I didn’t want people to see a half-finished car so I made sure everything was done in one go.”

    Of course it’s the 1M body conversion that really takes centre stage here and you have to appreciate just how much work has gone in to transforming this car from humble 120d to fully-fledged performance monster. “My criteria for the build was that the car had to be executed as if BMW had built it,” Nina explains. “I can’t stand it when people do things by halves. For me it has to be done properly. The rear arches, for example, aren’t welded on; they’re complete new rear quarter sections, which is exactly the way BMW would have built the car and exactly how I wanted it to be built.” Indeed, the quality of Quarry’s work really is exceptional. There is absolutely no way that you’d be able to tell that this car had ever been anything other than a 1M. It really is perfect. The muscular styling is further enhanced by the addition of a BMW M Performance carbon bootlip spoiler and that unmistakable M3 power bulge bonnet. “I knew I had to have the power bulge bonnet,” says Nina. “It changes the whole look of the car for me, so I went for a Seibon carbon one designed specifically for the 1M. It’s fully functional, just like the M3 bonnet would be, so the offside vent is blocked off while the nearside vent connects up to the air box as a secondary cold air feed. The bonnet latches down like the standard one, but the problem is that the carbon is so much more flexible than the steel bonnet. The first time I drove it the bonnet was flexing so much at motorway speeds that I knew immediately I had to add some AeroCatches. Fitting them was tricky as the bonnet is curved and you want them to sit flush rather than sticking up, but they look perfect and really keep the bonnet down. The fitment of the carbon bonnet isn’t perfect, though, and I would love to have a metal one made but it would have to be aluminium. The standard M3 bonnet is steel and I really don’t know why BMW didn’t use a lightweight bonnet; I’ve saved quite bit of weight with the carbon bonnet so I wouldn’t want to go for a steel one, especially as the S65 V8 is just 7kg heavier than the N54 but actually sits lower down and further back in the chassis giving the car better weight distribution.


    “When it came to the wheels I did consider a few different designs but the Style 359 is my favourite BMW wheel, so that’s what I went with. I think this style of wheel looks fantastic on a modern car and really finishes it off, so the wheels are definitely staying for now,” she says. “I might change the colour as I’m not sure about the black but it does look good against the green and ties in nicely with the black accents on the body. I’ve currently got the standard size tyres, 245/35 and 265/35 Toyo R888s, but I’d like to go to a 265/295 front/rear setup as they’ll really fill the arches out and I don’t want to use spacers to achieve that.”

    If you own a V8 it’s pretty much the law that you have to fit a performance exhaust because it’s an engine that never sounds anything less than fantastic. And Nina’s 1M definitely doesn’t disappoint on the aural stimulation front. “I didn’t want to go all-out with an off-the-shelf exhaust as I’d like a custom system at some point, but I still wanted something that sounded good,” says Nina. “At the moment it’s running a Milltek 1M rear silencer, which has been designed for a turbocharged engine rather than a naturally aspirated V8, along with some M3 sections and a bit of custom pipework to connect it all together. I did have it fully de-catted at one point and I loved how obnoxiously loud it was, but it absolutely stank of fuel and after every drive the exhaust tips were black. I got fed up with it and had the cats put back in; while it’s definitely quieter the tone is nicer now and I prefer the way it sounds. I would still like a full system at some point but I’m content for the time being.” It does sound absolutely fantastic, with a boisterous cold idle that is guaranteed to slap a grin on your face, but delivers a surprisingly civilised soundtrack once it’s warmed-up. Of course, at full chat it delivers exactly the sort of spine-tingling, high-revving V8 howl that you want, overlaid with numerous pops and crackles. It’s Mozart for the motorhead.

    Even now, nine years on since its debut in the E9x M3, the S65 V8 is still an absolute masterpiece of an engine. “I love the power delivery,” grins Nina as we indulge in a long chat about V8s. “It really does pull like a train. I love the way the power delivery is so linear and the way the power just keeps on coming once you’re at the top end of the rev range. Mine is very healthy. I’ve heard that a lot of M3s don’t even make 400hp on the dyno but mine made 426hp without the cats, so it’s probably around the 420 mark now.

    As far as the gearbox is concerned, I’ve always been a manual enthusiast but I decided to drive both a manual and DCT M3 to see what the engine and gearbox combination felt like and I have to say that the manual car did nothing for me. The way the engine delivers its power means that the DCT ’box just feels so much better suited to it. I’m so glad I went for the DCT, I absolutely love the gearbox and the combination with the S65 is just perfect.”

    To you or us the car might look as complete as can be but for Nina this is only the beginning of her 1M adventure. “It was a year long journey to get to the car built,” she says, “and I finished in January of this year.

    However, for the last six months I’ve been refining and tweaking it and there’s still lots more I want to do. I’m planning to add a carbon race diffuser and front lip as well as a carbon roof, which I feel the factory 1M should have come with, like the M3. The suspension isn’t finished at the moment; it’s currently on M3 EDC shocks with Eibach springs. I like how it sits but I would like coilovers at some stage. I’m not sure what to go for, though, and I don’t want to just buy something that might not be right for it. I’m going to spend the coming months, the whole year even, learning the car, educating myself on what it wants before buying anything so I know I’ll be fitting the right parts when the time comes. I also love motorsport and while the car has started its journey like this it will evolve as time goes on, so I might well strip it and put a cage in it at some point. I’ll probably add a wing then as well. I would also really like to supercharge it at some point but at the same time I want to refine it first, make it the best it can be in its current form before I start doing any power upgrades. I do love the fact that the car will continue to evolve. That keeps me enthusiastic about it and ensures it doesn’t get stale.”


    Which brings us neatly to the question of how long Nina thinks this relationship will last, though we feel bad asking the question seeing as the car’s such a recent build. “At the moment it really does feel like it’s a forever car,” she says. “I have so much time, effort, and emotion invested in it that I can’t ever imagine selling it. I don’t even want to think about that. From the moment the car was finished people started getting in touch asking if I would sell it. I’ve had so many people asking me about buying it that I’ve lost count. Initially I was a bit offended; I couldn’t believe that people would think I’d want to sell a car I’d just finished.”

    While there might be lots more to come, there’s plenty to enjoy right now and that’s exactly what this car was built for. “This car was all about doing something purely for my own enjoyment. I didn’t want to worry about mileage, money or depreciation, I just wanted to build a car that I could go and enjoy driving. And that’s exactly what I’ve got. I do drive it based on the weather as I don’t want to take it out in the rain. So it’s a fair weather weekend toy for me and as it’s just been finished I am precious over it. I hate getting stone chips on it, though the whole front end has been covered in Suntek paint protection film so it’s not too bad. I guess it’s just inevitable. I have lots of plans, too. I want to take it to Europe. I’m currently looking for places to go and enjoy driving it,” grins Nina. That’s really what it’s all about. You don’t build a car like this to only hide it away or simply park it up at shows for other people to enjoy. You build it to enjoy driving it and there are few machines out there capable of delivering greater driving pleasure than a V8 1M.


    DATA FILE #V8 #BMW-1M / #BMW / #BMW-E82 / #BMW-1-Series-E82 / #BMW-1-Series / #BMW-1M-E82 / #BMW-E82-S65B40 / #BMW-1M-S65B40 / #S65 / #BMW-S65 / #BMW-E82-V8 / #BMW-Style-359-Competition / #BMW-1M-M-DCT / #BMW-120d-E82 /

    ENGINE AND TRANSMISSION 4.0-litre V8 #S65B40 from E92 M3, 1M #Milltek back box, part custom and part OEM M3 exhaust system, seven-speed #M-DCT gearbox from E92 M3

    CHASSIS 9x19” (front) and 10x19” (rear) #BMW-Style-359 Competition alloys with 245/35 (front) and 265/35 (rear) Toyo R888 tyres, E92 M3 brakes with Java green calipers (front and rear), E92 M3 EDC with #Eibach springs

    EXTERIOR Full OEM 1M conversion, full bare shell respray in Individual Java green metallic, gloss black trim, Seibon carbon fibre bonnet with AeroCatches, BMW M Performance carbon fibre bootlip spoiler, Blackline rear lights, Suntek paint protection film

    INTERIOR Full retrim consisting of extended black Nappa leather with green stitching and Alcantara accents, Alcantara gear selector, handbrake gaiters and door cards, steering wheel retrimmed in Alcantara with Motorsport stiching and green 12 o’clock centre stripe, extended aluminium paddles in Java green metallic with illuminated plus and minus signs, Java green start button bezel, #Java-green #DCT gear selector surround, heated E92 M3 front seats, BMW Performance carbon fibre trim, #BMW-Individual audio with #Harman-Kardon speakers

    THANKS A massive thank you to Quarry Motors, especially Ashley and Lee for agreeing to take on this project with me. Ashley is responsible for building me a spectacular, unique car that has been executed as if #BMW itself built it. Sam for initially sowing the seed and getting the ball rolling. To my biggest support, I must extend huge gratitude to Nick who has been my anchor throughout this journey. My mum who gracefully endured my countless indecisions. To all my great friends who have offered their support and advice, I thank you; Silas ‘Mr B’, Vaughan the Prawn, Richard and Sebastian with Bruce’s twin ‘the blue car’, Steven ‘Horney’, Paul ‘Mumbers’, Kos, Mason, Marsel and the rest of my big BMW family. B-Trim, Elite Car Care, Evolve Automotive, Mox3d, Mumbray Motorsport, Munich Evolution, Munich Legends, Olgun Kordal – The Car Photographer, Pukar Designs, Royal Steering Wheels, Secure My Car and SMV Repairs, Taylor Made Decals

    Java green is stunning and really suits the perfectlyexecuted 1M conversion, while the glorious #S65-V8 is the icing on the cake.

    “I love the power delivery. It really does pull like a train. I love the way it is so linear and the power just keeps on coming”
    “My criteria for the build was that the car had to be executed as if BMW had built it”
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Elizabeth reacted to this post about 3 years ago
    DARREN’S E82 #118d / #BMW-E82 / #BMW-118d / #BMW-118d-E82 / #BMW / #BMW-118d-Tuned / #BMW-1-Series / #BMW-1-Series-E82 / #BMW-118d-Tuned-E82 / #BMW-1-Series-Coupe / #BMW-1-Series-Coupe-E82 / #BMW-118d-Rebuild / #BMW-118d-Drift-Car

    Over the last few months it’s been a bit of struggle to find some time for the car, really. The lead-up to Christmas was absolutely full-on at work and then when Christmas rolled round I felt like I just needed a little time to do nothing apart from drink and eat food! But, hey ho, the holiday period is over now and its back to it!

    My plans have slightly changed with the car. With a few rules changing in the British Drift Championship, and with no sight of sponsors or financial backing to race this season, it’s only going to be used for a few practice drift days here or there. Unless something changes dramatically over the next few weeks I think I’ll be focusing on making the car more of a fast road/track build rather than a full drift car as I first set out to do. Don’t get me wrong, I’ll still smash it round a track, no bother, but I just want to be able to use it on the road as well. So, with this in mind, I’ve changed a few things. One major thing is up front; with no steering lock kit I’ll just be running standard M3 hubs and standard steering lock. As you may know, in drifting we normally run different steering setups to get maximum angle in and out of corners, but most are not road-friendly. Obviously I could have built this car with all fibreglass panels then I wouldn’t have cared too much about it, but that was never the car I wanted to build from the start.

    Anyway, I digress. I’m so close to sending the car away for paint, it’s just this section in the build process that seems to take forever! I’m trying to get all the little bits complete so once it comes back from paint I won’t have to grind this, change that, drill this etc. The main things are the manifold (I’m just waiting on a small section of pipe to fit the second wastegate and that’s the manifold complete at long last. Why did it take so long? The answer is lack of time and doing everything in-house between friends rather than sending it away or buying a complete car. It takes a lot longer but not only is it more satisfying. Also, if I got someone else to build the car the way I wanted it built, the bill would be through the roof! The problem is all my friends spend a lot of time working on their own builds. For example, Pete has just started taking his turbo 500hp+ E30 Convertible to bits for its annual winter spruce up. Matty has been building his Toyota 1.5J-powered Nissan 350Z. While Yates has just finished his barge off, an Audi A6 with a 500hp single turbo 2.7 V6, so there’s plenty going on in the garage!

    The engine has been in and out the car over 100 times now (if you’re following my Instagram account, @Darrenr33, you will know this already!) to make sure the turbo position is correct and that I can get the wastegates in, too! We have also made a start on the front pipe from the turbo-back; the Precision turbo only has a 3” outlet so we have stepped this up to 3.5” and that’s going to run all the way to my back boxes. We need to somehow shoehorn it in between the engine and chassis leg as it’s starting to get tight! I have no doubt Pete will sort the job out…

    Another job I still need to tackle is to swap the diesel front panel for a petrol one as the alloy radiator does not fit (it was making the radiator sit too close to the engine). And the petrol front panel solves this problem although we still need to squeeze a lot of coolers in there somewhere, too! I’ll just put that on the ‘to do’ list. And remember, don’t be shy, go take a look at my build.
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Darren Rickaby reacted to this post about 3 years ago

    No sleep 476HP 135i Wild 1 Series brings it on Most modified 135is we see are in sleeper guise. However, this boisterous example is loud and proud – and rightly so… Words: Elizabeth de Latour. Photos: Matt Richardson.

    Last year saw this magazine nearly overrun with 1 Series feature cars. This was totally fine as far as we were concerned because a lot of you are clearly loving them, otherwise we wouldn’t have been inundated with such a huge variety of fantastic modded examples. The charms of the 1 Series are hard to resist and while some people might find the first generation hatch a little inelegant on the styling front, we reckon #BMW nailed it with the Coupé. And people clearly agree, as that’s mainly what everyone’s been modding. A quick glance at the classifieds shows that this iteration of the 1 Series is holding its value and while some people might think you’re not getting a lot of car for your money compared to what else you could buy, the appeal of a compact, sporty car that’s also practical and can be had with a huge range of engines is easy to see and hard to resist. It’s the perfect antidote to the supersizing epidemic that’s now a staple of the motoring industry. And it’s a car with plenty of potential. Just ask Dom C, because he took a fiery little 135i and turned it into a real beast. It’s most definitely not shy about what it’s capable of; with 476hp on-tap, why would you be? A sleeper this ain’t.

    A glance at Dom’s car history shows you that the 135i fits right in with his taste in small, fast cars, which have included a Saxo VTR and VTS, a Toyota Glanza V turbo, a Civic Type R, and an Impreza RB5 – which is a little less small but was “mega”, according to Dom, so that’s fair enough. “I had a 120d,” he continues, “which was good on fuel. This was good for when I was going to business meetings, but I decided I wanted something really fast that would handle well and was exciting. There was nothing of this age with a six-cylinder engine and rear- wheel drive apart from a 135i, so I bought one.”

    The car was purchased bone stock and the initial plan was just to fit a JB4 and an exhaust because these alone would amp up the performance in a big way. But after Dom had sampled the sweet taste of what the 135i could offer, there was no way he could go cold turkey. And he had a pusher.

    “The car’s been sponsored by Hard Knocks Speed Shop,” Dom explains. “It saw that I was passionate about modding and we had a great relationship, so it offered to sponsor me. Badger there has done all the work.” With his sights set on some serious numbers, things were going to have to change…

    That JB4 is now a Cobb, supplied by BW Chiptune with a custom remap by Litchfield. The exhaust is now a custom straight- through system from Hard Knocks Speed Shop, with no cats or silencing. There’s even a valve for increased loudness. There’s a video of it in action on our Instagram page (@pbmwmag) and, having heard it in person, we can confirm it’s very, very loud.

    The path to 476hp is lined with a lot more than just a Cobb and a custom exhaust, though. Dom has been busy under the bonnet, with the resulting list of engine mods making for some impressive reading. The stuff you can see includes a set of BMS dual cone intakes and an HKS SSQV blow-off valve. And there’s much more going on
    beneath the surface that you can’t see. The stars of the show are, without doubt, the Turbo Dynamics Stage 2 hybrid turbos that really help to push the power up. But they don’t have to go it alone; up front sits a beefy Pro Alloy intercooler, there’s a Fuel It Stage 3 uprated fuel pump, a VRSF metal charge pipe with meth bungs, VRSF cat-less downpipes, plus a BMS meth injection kit to help keep intake air temperatures down.

    The end result of all that underbonnet wizardry is a very impressive dyno-proven 476hp and over 400lb ft of torque. That’s an awful lot of power to enjoy in a compact car such as this. And that dyno run took place on a really hot day with intake temperatures well over 80ºC and the ECU pulling the timing, so there’s potentially even more on tap than the figures suggest.

    Of course, simply ramping up the power and hoping for the best is not the way to do things and most certainly not the way Dom was planning to do things. So those engine mods are joined by a supporting cast of chassis and drivetrain mods. The standard clutch would have been completely out of its depth with these sort of power figures so it’s been replaced with a much sturdier Spec Stage 3+ affair mated to a single mass flywheel. On the chassis front, BC Racing coilovers have been called to action, along with M3 lower control arms, and a strut brace. And that’s not all because Dom then took the car to FW Motorsport, run by Tom Walkinshaw’s son Fergus, who spent a day-and-a-half setting up the suspension after corner weighting the car. Dom is also planning to add some custom adjustable drop links.

    The brakes haven’t been forgotten about either. With the 135i coming equipped with some pretty serious six-pot front calipers from the factory there was no need for a BBK, but grooved discs have been added and are clamped by Pagid RS29 race pads. Goodrich braided hoses and race brake fluid concludes the brake upgrades.

    Somehow we’ve managed to make it this far without once mentioning the way this car looks – which isn’t easy because this is a 1 Series that stands out, and then some. A lot of this is to do with the Avery Denison Gloss Blue wrap. “The car was originally Monaco blue,” explains Dom, a colour that you can see lurking in the engine bay. “It had no presence and made the car not look as fast as it actually was. My neighbour had a GTR wrapped in this blue and I absolutely loved it, so I decided to get the 135i done in the same shade, and the bonnet and mirrors done in gloss black.”

    With the 135i looking rather more rapid, Dom set about adding the aero addenda. This started off with the relatively subtle carbon front splitter, followed by the carbon bootlip spoiler, and then the bulging Seibon carbon bonnet with aero catches. But Dom refuses to take responsibility for that rear wing. “It’s all Hard Knocks’ fault,” he laughs. “They suggested I got a wing. I agreed and went online to buy it whilst in the pub… although I don’t actually remember buying it!” Oh dear. Still, while the APR rear wing would look out of place on many a car, the overall look of this 135i means it works here. It ties in nicely with the whole black and blue theme, as do the wheels, which are Apex Aero-7 18s, with the car’s arches having been rolled to help accommodate them. The wheels have been wrapped in super-sticky Advan AD08R semi-slick rubber for maximum grip.

    As for that Gran Turismo sun strip: “I think it looks badass,” explains Dom, “and it makes a huge difference to the feel of the car when driving.” The interior has, for now, been left largely standard, bar the removal of the rear seats, but Dom was planning on fitting some bucket seats and a roll-cage, that is before he decided to sell the car…

    We should be used to it by now, feature cars owners getting in touch not long after a shoot informing us that they are selling their BMW. That’s the way it is with projects, but it was still a little surprising to hear it from Dom considering just how much he’d put into the 135i. It turns out he’s gone and bought himself a Nissan GTR and, to be fair, the signs were there all along as we recall he mentioned it on the day of the shoot. We can’t really blame him either; the GTR is a hell of a car and probably one of the few things that could get his heart pumping the same way as his ferocious 135i. Could we, he asked, mention that it was going to be up for sale? Of course. But then, a month later, we received another email. The 135i was staying, a stablemate for the GTR, and Dom had, in his own words, “gone full circle”. In fact, he now plans to take the 135i to the next level: a roll-cage, bucket seats and steering wheel will transform the interior, while a race diffuser, a side exit exhaust, and a body kit will transform the exterior. “It’s come too far to go back…!” were Dom’s parting words on the email. We can’t wait to see him go all the way.


    Custom-mounted meth injection kit helps keep inlet temps down and power up.

    DATA FILE #BMW-E82 / #BMW-135i / #BMW-135i-E82 / #BMW / #BMW-135i-Tuned / #BMW-1-Series / #BMW-1-Series-E82 / #Turbo-Dynamics / #Apex / #BMW-135i-Tuned-E82 /

    ENGINE AND TRANSMISSION 3.0-litre twin-turbo straight-six #N54B30 / #N54 / #BMW-N54 , #Cobb-V3-Accessport custom mapped by #Litchfield-Motors , #BMS dual cone air intakes, #HKS-SSQV blow-off valve, #Turbo-Dynamics-Stage-2 hybrid turbos, #Pro-Alloy front mount intercooler, Fuel It Stage 3 upgraded fuel pump, custom- mounted BMS meth injection kit, #VRSF metal charge pipe with meth bungs, VRSF cat-less downpipes, Hard Knocks Speed Shop custom Y-pipe , custom straight- through two into one 3” de-catted centre section, custom quad exit exhaust system with electronic valves. Six-speed manual gearbox, #BMWP short-shift, Spec Stage 3+ clutch and single mass flywheel

    POWER & TORQUE 476hp and 400lb ft+

    CHASSIS 8x18” ET45 (front) and 9x18” ET50 (rear) #Apex-Aero-7 satin black forged wheels with 225/40 (front) and 255/35 (rear) Advan AD08R tyres, #BC-Racing coilovers, M3 lower control arms, strut brace, car corner weighted, Pagid RS29 race brake pads, grooved discs, #Goodrich braided hoses, race brake fluid

    EXTERIOR Wrapped in Avery Denison gloss blue with gloss black roof and gloss black door mirrors, tinted windows, rolled arches, gloss black kidney grilles, carbon front splitter, #Seibon carbon #Powerdome bonnet with AeroCatches, carbon rear spoiler, #APR carbon wing, custom carbon diffuser, #BMW Darkline rear lights

    INTERIOR Factory grey M Sport leather, Cobb V3 Accessport controller, rear seats removed

    THANKS Chris Bourton (Badger) at Hard Knocks Speed Shop, Fergus Walkinshaw at FW Motorsport, #Litchfield motors for mapping, #SSDD-Motorsport , and Amber performance
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Elizabeth reacted to this post about 3 years ago
    THE MPRESSIONIST 470hp 1M-kitted 135i / HARDCORE 135i 470hp, #1M-kitted beast

    With 1M looks backed-up with a lot more than 1M power, what was once an unassuming 135i is now a package of pure muscle. Words: Elizabeth de Latour Photos: Matt Richardson

    Fitting the 3.0-litre, twin-turbo, straight-six N54 engine into the 1 Series Coupé is one of the best things BMW has ever done. The engine amazed when it first appeared in the E9x 335i thanks to its combination of huge torque spread, impressive top-end, and stirring soundtrack (despite the presence of two turbos to muffle the exhaust note). And then BMW decided to stuff it under the bonnet of the smaller, lighter 1 Series Coupé creating something of a performance hero. But the story doesn’t end there because a couple of years later BMW came out with the 1M, with the E9x M3 running gear crammed under those swollen arches, more power and more attitude, this time creating a performance icon. These days you can pick a 135i up for about £10,000 whereas you’d need about £40,000 to get your hands on a limited edition 1M. Of course, the 1M is a very different prospect when compared with a plain Jane 135i but certainly as far as performance goes there’s hardly anything in it. And once you’ve whacked a remap on the 135i it’ll be the quicker car, if that’s what you’re interested in. Of course, there’s nothing stopping you from buying yourself a 135i and building it up into something that’s even better than a 1M…

    Meet Sachin Patel, a man who’s done just that. And while he’s got a fair bit of cash invested in his long-term love of a 135i, he’s built this beast of a 1 Series for less than stock 1M would cost to buy. It’s packing some serious firepower, enough to refuse to be intimidated by all but the most heavyweight high performance machinery. And, of course, pouring money as well as your heart and soul into your BMW is just part of everyday life when you’re a lifelong fan of Bavaria’s finest.

    “Actually, I was never a BMW fan,” says Sachin. Oh well, scratch that then. “I lived in West London and saw so many so I wasn’t really interested in them at all. That all changed, though, when I drove a 120d. I was really impressed by it. I was looking for a small, powerful car that was also economical and when I read Jeremy Clarkson’s review of the 135i I was sold and went and bought one.”

    Sachin always knew he was going to modify his 135i and the first item on his list was more power, because when it’s so easy to extract it would be rude not to. In order to ramp up the power the 135i was treated to a remap, along with an induction kit and a pair of uprated diverter valves. This was enough to nudge power up to the very high 300s and plenty to be getting on with. Sachin also decided to give his chassis a bit of a tweak with the addition of some thicker Eibach anti-roll bars to improve its cornering abilities. And that was enough to satisfy his needs for mods for a while.

    “After I’d had the car for about four or five years I decided to sell it and move onto something else,” says Sachin. “A prospective buyer came over one day to have a look at it and said that he was going to put a 1M kit on whatever car he bought. It sounded like such a good idea that I removed the car from sale and started looking at getting the 1M kit done myself. I called MStyle, said I wanted a 1M kit, and everything snowballed from there.”


    The transformation was no gentle transition, though. “The styling went from standard to this in one go!” Sachin exclaims. That’s one hell of a transformation. The kit is a Prior Design M wide-body kit, consisting of front and rear bumpers, side skirts, wider front wings and wider rear quarter panels. It’s comprehensive and means that this 135i looks every inch the 1M that inspired its makeover. Now, the kit on its own is awesome and Sachin could have left things there and been extremely happy with the results, but he didn’t. At the same time as the kit was being added a whole host of other styling additions were thrown into the mix to take the car to the next level. Up front there’s an MStyle carbon fibre vented power dome bonnet, a full-length carbon front splitter, and #BMW M Performance gloss black kidney grilles. Then you’ve got the 1M door mirrors, a carbon boot spoiler and carbon fibre rear diffuser from #MStyle , plus LCI Darkline rear lights. These elements are all pretty subtle compared to the impact of the body kit but they definitely add the perfect finishing touches.

    Originally, Sachin’s 135i had been white but with its transformation to a wide-body monster it needed a fresh new look. “I’d decided I wanted a matt colour and was debating between black and grey,” he says. You can see which choice won in the end, with the car now finished in stunning Frozen grey. It’s a gorgeous colour that accentuates all of the car’s lines and gives it an otherworldly look. In addition to the Frozen grey bodywork the roof has been painted gloss black, which offers a nice contrast. With the new body kit there was no way that the M Sport wheels that the car had come with would cut the mustard any longer, nor were they beefy enough to fill those fat arches, so the hunt was on for a new set of rims that would be up to the job. Those wheels are Forgestar F14s, forged 14-spoke affairs which are, usefully, available to order in some serious widths and with astonishingly deep concave designs. Indeed, the 9x19” fronts are labelled Deep Concave while the 11x19” rears are what Forgestar calls Super Deep Concave, and that’s no exaggeration, the spokes disappearing deep within the wheel before they hit the centre. With a kit as wild and wide as this you really need to make sure your wheel choice won’t be overwhelmed by those massive arches and that it is capable of delivering its own brand of wow. Well the Forgestars definitely deliver on that front.


    With Sachin’s styling plans accomplished, he decided to look at getting a bit more power out of the N54 as, while the 135i was quick, there was still a lot of untapped potential. And who better than MStyle to help tap it? As such, the engine has been fitted with a Mosselman MSL 500 turbo kit, Mosselman twin oil cooler kit and oil cooler separator. There’s also an induction kit, uprated intercooler, uprated low pressure fuel pump, cat-less downpipes, a de-cat centre section with a custom quad exhaust system, and the whole lot is topped off with a Mosselman Stage 3 remap. The end result?

    A dyno-proven 470hp with a thumping 480lb ft of torque, huge gains that deliver equally huge performance and really push what was once a humble 135i to the next level.

    Up until this point Sachin was still riding on nothing more than the stock suspension with the only handling aids being those Eibach anti-roll bars, so that needed to change. MStyle recommended coilovers so he whipped his wallet out and opted for a set of BC Racing height and damping adjustable items with matching front camber adjustable pillow ball top mounts. “It rides and handles brilliantly now,” says Sachin, “and there’s so much grip it’s actually scary!” He’s has kept the standard callipers because they’re pretty massive, with six-pots up front, but they’ve been given a lick of orange paint which really makes them stand out against the black wheels and grey bodywork.

    Inside you’ll find red leather, which looks equally good against the exterior, with carbon trim and a BMW M Performance gear knob, Alcantara gaiter, and matching Alcantara handbrake gaiter. Since the shoot Sachin has added an M Performance Alcantara steering wheel with shift lights and a digital display. He is now thinking about fitting a pair of M4 front seats, which would look awesome.


    As we finish up our shoot, Sachin asks if I’d like to take the 135i it out for a spin. I grab the key off him with such ferocity he’s lucky he’s still got a hand left. The first impressions behind the wheel are defined by the stubby gear knob, UUC short-shift kit, and UUC Stage 2 multi-puck ceramic clutch.

    It all feels a bit sharp and snatchy for someone who’s just jumped in the car for the first time, so I’m gentle with the clutch and gear change and it’s clear that you’d very quickly get used to the combination and drive it as smoothly as any other car. What a short-shift kit does do, though, is make you want to drive fast and rip through the gears – so that’s exactly what I do. The performance is awesome! It’s the torque that really gets you. There’s so much of it spread over such a wide rev range that it’s always there when you put your foot down. When you do the 135i just explodes forward. It’s incredible and makes this car ridiculously rapid. It takes no effort to find yourself travelling far more quickly than you ever had any intention of doing. The mid-range is so astonishing that you find yourself shortshifting, which drops you right back into the torque plateau, but when the opportunity arises I keep the throttle pinned to get a taste of the top end and it doesn’t disappoint. There’s no let up in acceleration and the power just keeps on coming. When you tap into that heady top end the car feels ferocious and furious and it’s addictive.

    The ride is firm but compliant and the chassis feels taught and precise, the 135i cornering hard, fast and flat, while the brakes feel strong with plenty of feel through the pedal providing massive stopping power. Oh, and it sounds good, too. Really good. That fully-decatted exhaust really lets that straight-six sing. It’s a great noise, the icing on a very fast cake indeed.

    “I’m very happy with the car,” grins Sachin as I hand back the keys, though perhaps that’s why he’s smiling. “It gets lots of attention. I’m actually surprised just how much. It’s got the look I’ve always wanted and it’s the car I’ve always wanted.”

    What Sachin’s done is taken a good car and made it great, which is the ultimate modifying goal. And when the end result is as impressive as this, that’s something you can be truly proud of.

    Interior features carbon trim, a shortshift kit and red leather, which looks great against the grey exterior; orange brake calipers add a flash of colour.

    TECHNICAL DATA FILE #BMW-E82 / #BMW-135i / #BMW-135i-E82 / #N54 / #BMW-N54 / #Mosselman-MSL500 / #Mosselman / #UUC-Motorwerks / #N54-Mosselman / #BMW-135i-Mosselman / #BMW-135i-Mosselman-E82 / #Mosselman-Stage-3 / #BMW-1-Series / #BMW-1-Series-E82 /

    ENGINE 3.0-litre twin-turbo straight-six #N54B30 , #Mosselman-MSL500-N54-turbo-kit , twin oil cooler kit and oil cooler separator, induction kit, uprated intercooler, uprated low pressure fuel pump, cat-less downpipes, de-cat centre section, #Mosselman-Stage-3 remap

    TRANSMISSION Six-speed manual gearbox, #UUC-Motorwerks-Stage-2 multi-puck ceramic clutch, UUC Motorwerks double-shear Evo short-shift kit

    CHASSIS 9x19” (front) #Deep-Concave and 11x19” (rear) #Super-Deep-Concave-Forgestar-F14 forged wheels in gloss black with 245/35 (front) and 285/30 (rear) Continental ContiSportContact 5P tyres, #BC-Racing height and damping adjustable coilover kit, #BC-Racing front camber adjustable pillow ball top mounts, #Eibach anti-roll bars, brake calipers painted in custom orange with M decals, #Quaife-LSD

    EXTERIOR Prior Design M wide-body kit consisting of front and rear bumpers, side skirts, wider front wings and wider rear quarter panels, painted MStyle carbon vented power dome bonnet, MStyle full length carbon fibre front splitter and carbon fibre rear diffuser, BMW M Performance gloss black kidney grilles, OE 1M air ducts and arch liners, OE 1M door mirrors, MStyle custom quad exhaust, SuperSprint quad tailpipes, MStyle carbon boot spoiler, full respray in Frozen grey, roof painted gloss black, Darkline E82 LCI rear lights

    INTERIOR #BMW M Performance gear knob and Alcantara gaiter, #BMW-M-Performance Alcantara gaiter for handbrake

    “It rides and handles brilliantly now… there’s so much grip it’s scary”
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Bob BMW reacted to this post about 4 years ago
    We lose the plot with this insane twin-supercharged V10 BMW-1-Series !

    / #S85 / #V10 / #BMW-S85 / #BMW / #BMW-E82 / #BMW-1-Series-E82 / #BMW-E82-V10 / #BMW-1-Series-V10
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
  •   Andy Everett reacted to this post about 4 years ago
    HIDDEN STRENGTH

    With its subtle looks, this 135i can slip under the radar, which is handy as it’s got 460whp on tap. This 135i might look fairly ordinary but appearances can be deceptive and there’s a lot more going on here than meets the eye… Words and photos: Chris Nicholls.

    Disappointment is sometimes a powerful motivator. Sports teams that lose the championship one year have been known to turn that negative feeling into a springboard that pushes them to win it the next. So it was with Pete Agas and his 135i.

    Initially, he wanted a 1M Coupé, but only 200 came to Australia and he missed out on the allocation. He didn’t let that get him down, though. Instead, he purchased an E82 135i and used the leftover funds to change almost every mechanical component to make it much faster than a stock 1M ever was.

    The story begins back in late 2012, when he first purchased this Alpine white example fresh from the dealer. Having been inspired to tune cars ever since his youth (when watching Stephen Spielberg’s debut feature – Duel – made him think about tuning cars so he could outrun a psychotic truck driver), Pete wasn’t going to leave it untouched for long, and after posting a few pictures of it in its factory state on his online build thread (complete with the caption: ‘stock… yuck’), he started to modify it to suit his tastes.

    As for those tastes? “I build, tune and customise my vehicles for performance over appearance,” he says, and as you can see, the finished car reflects that. APEX ARC-8 wheels, StopTech BBK, #Hartge silencer and M Performance carbon bits aside, there is no indication from the outside that this machine puts out 460whp at low boost and pounds around race tracks with ease. Even looking under the bonnet yields nothing to the casual observer, and unless they were looking hard, enthusiasts would only spot the AFE Magnum Force Stage 2 intake and M Performance Power Kit 2 as well. Almost everything that means anything is hidden on this build, and that’s the way Pete likes it, especially as it makes it that much easier to goad other, supposedly faster, cars into a little challenge. “I frequently drive around the South Yarra area in Victoria where there are plenty of beautiful Porsches. I may have completely decimated a couple of them in a quick squirt contest…” he says with a grin.

    Of course, his E82 didn’t become this fast overnight. Indeed, having missed out on a 1M, he initially wanted just to match that car’s handling, with pure grunt not really on the radar. And even then, for the first year, Pete only drove it around with limited mods. An M Performance exhaust and exterior bits and some Rays G25 wheels upped the game from stock, but they were hardly going to help Pete reach even his initial goal. That’s why, after that 12 months, he started amassing E9x M3 suspension parts in bulk, along with other bits and pieces, so he could be ready for the next stage.

    Those E9x parts included sway bars, control arms, bushings, camber link kit and strut tower brace, to which he added Swift springs. Having basically matched the 1M’s key suspension elements, Pete then moved onto the brakes, with M Performance discs, Cool Carbon brake pads and Hard Braking front titanium shims. For a little extra grunt, he added the aforementioned Power Kit 2 and controlled it via a Quaife 3.08 helical LSD in a VAC finned, clear anodised cover. A Burger Motorsports clutch delay valve and clutch stop helped in the driveline department as well. Finally, a few extra M Performance exterior and interior parts helped round it off. Until the most recent major upgrades, the diff was actually Pete’s favourite component as it improved traction no end. “The LSD just puts the power down without the e-Diff having a field day. It was easily the most notable change when driving the car back home from the workshop for the first time.” The fact the Quaife diff works with the stock traction control is a bonus, too, even if Pete doesn’t need it in the dry.


    Now, you might think at this stage, having reached his initial goal, Pete would be satisfied and call it a day. After all, he had already created a very quick, but still very usable road car. However, the fact you see this rather faster beast before you shows he wasn’t done. What prompted him to go further were two new discoveries. Firstly, having gone this far into the BMW tuning world, he’d found a “huge amount of aftermarket potential within the BMW brand”, as well as a highly supportive and knowledgeable community to go with it.

    Secondly, having built a track-oriented car, Pete was hardly likely to keep it purely on the road, and a visit to Phillip Island one day proved rather comprehensively that while strong, his build wasn’t perfect.

    “I quickly discovered the platform needed brakes and cooling,” Pete tells us. “I also learned very quickly of the possibility of a spun rod bearing when pushing wet-sumped platforms on the track, so I quickly picked up an oil pan baffle to prevent this from happening to me.”


    Having discovered these weaknesses, Pete also bolted on an oil cooler and decided that even the upgraded brakes he had weren’t going to cut it. So, as part of the final stage of mods, he purchased a StopTech BBK, with ST60 six-pot calipers on the front and ST40 four pots on the rears, matched with StopTech’s own Street Performance pads.

    These clamp down on with Trophy Sport two-piece slotted discs to provide a significant upgrade in braking ability. Indeed, these are now Pete’s new favourite parts. “The new brakes not only look great, but they have an amazing pedal feel, are completely modular and replaceable and have a huge range of available pads.”

    That they sit this high in his estimation is a big endorsement, given the rest of the upgrades he fitted at this stage. In the engine bay, he installed a Pure N55 Stage 2 turbo, an AR Design downpipe, Maddad midpipes and the aforementioned Hartge silencer on the hot side. He also fitted the previously mentioned AFE Magnum Force Stage 2 intake, an ETS five-inch intercooler and lower charge pipe, an Evolution Raceworks black anodised chargepipe and GFB N55 diverter valve upgrade on the cool side. Unsurprisingly, given the company’s reputation, a Dinan Stage 3 135iS tune controls the lot.

    To further enhance the car’s abilities on the track, Pete also added Dinan Racing adjustable rear toe arms, Dinan front control arm bushings, Turner Motorsport solid aluminium rear subframe bushings and Ohlins Road and Track dampers. Finally, some sticky Hankook RS-3s on those handsome APEX ARC-8 wheels put all the power to the ground.


    The results are quite startling. Given the sticky rubber and LSD, you’d think traction wouldn’t be a problem, but with TC off, Pete was able to spin up the wheels well into third gear on our short spot-shoot drive. “This is with the turbo at 15psi, remember,” Pete reminds us. “It’s capable of 27 or even 30psi. Frankly, I think it’d be undriveable on the street like that. I would need drag slicks or something.”

    He’s probably right. The biggest impact, though, came from the fact that the power just kept on coming. Starting from around 3000rpm, it genuinely didn’t stop until very close to the redline. Owners of modern, well-tuned turbo cars will no doubt be nodding along to this in recognition, but for those who haven’t experienced such a longlasting rush, it’s quite the memorable event.

    Thankfully, all of Pete’s suspension changes keep the car a lot more pinned to the ground, even if traction is a bit of an issue. It’s firm, no doubt, but even the harsh, sharp-edged bumps on Melbourne’s often lumpen roads didn’t jar particularly. It’s a testament to both the quality of the parts and Pete’s careful selections. “I like to think with the right amount of planning and research, most, if not all risks [when building a car] can be mitigated,” he says knowingly. “I checked, re-checked and triple-checked the parts that were chosen for the car and I paid very close attention to their fitment and quality before proceeding with the purchase. That research, coupled with the highly talented team over at SouthernBM (his chosen workshop), made the process easy.”

    So, having now built a sleeper that can not just match a 1M but surpass it in every measure (bar width), is Pete satisfied? Is he done? Of course he isn’t. Soon after the shoot, he fitted some Kerscher 1Mstyle front wings and eventually, plans to turn it into a roadregistered track car, complete with rear seat delete, half-cage, Recaro Pole Positions, lithiumion battery, Evolution of Speed N55 manifold, E85 tune and carbon bonnet.

    This would leave him without a daily driver, though, so what gives? Well, on 14 October last year, Pete watched the livestream as #BMW introduced the M2, and soon after, strode into his local dealership and ordered a manual one in Long Beach blue. We guess he never did get over the disappointment of the 1M after all…

    StopTech ST60 front BBK boasts 355mm discs and six-pot calipers, necessary when you’ve got 460whp to play with.


    DATA FILE #BMW-E82 / #BMW-135i / #BMW-135i-E82 / #BMW-1-Series / #BMW-1-Series-E82 /
    ENGINE 3.0-litre straight-six turbo #N55B30 / #N55 / #BMW-N55 , #M-Performance-Power-Kit-2 , #Pure-Stage-2 N55-turbo, Pure N55 inlet pipe, Evolution Racewerks N55 Type III Hard Anodised Black charge pipe, #AFE Magnum Force Stage 2 N55 intake, ETX 5” FMIC with lower chargepipe, GFB N55 diverter valve upgrade, #AR-Design N55 catted downpipe with ceramic coating, Maddad midpipes, Hartge quad-exhaust outlet silencer, 42 Draft Designs O2 sensor spacer, Dinan High Capacity oil cooler, Burger Motorsports oil catch can, JB4 ISO 5.9 with flex fuel wires - Map 6, Dimple Magnetic sump plug, Walbro 455 E85 Low Pressure Fuel Pump, Dinan Stage 3 Performance Engine Software map, VAC Motorsports N54 oil pan baffle

    TRANSMISSION Standard six-speed manual transmission, Burger Motorsports modified clutch valve, Burger Motorsports Short Throw clutch stop, Quaife 3.08 helical LSD, VAC Motorsports finned differential cover (clear anodised), Dimple Magnetic transmission plug (x2), Turner Motorsport Delrin differential bushings, E46 M3 transmission bushings

    CHASSIS 8.5x18” ET45 (front) and 9.5x18” ET62 (rear) #APEX-ARC-8-Hyper-Black wheels with 235/40 (front) and 265/35 (rear) Hankook Ventus RS-3 tyres, #Apex / #Apex-ARC-8 wheel stud conversion kit, #Project-Kics open-ended lug nuts, BMW E9x M3 strut tower brace, E92 M3 front and rear sway bars, E92 front upper and lower control arms, E92 rear upper control arms, E9x M3 rear lower camber link kit, Ohlins Road and Track dampers with E82 135i 7” 60Nm/MM Swift Springs (front) and E82 1M 9” 120Nm/MM Swift Springs (rear), Swift Thrust Sheets, Ohlins rear damper adjuster extenders, #Vorschlag camber plates, #Dinan-Racing adjustable rear toe arms, #Dinan Monoball front control arm bushings, #Turner-Motorsport aluminium subframe bushings, #StopTech ST60 #BBK with 355x32mm slotted, zinc-coated discs and StopTech Trophy Sport Aerohat hats (front) and #StopTech-ST40-BBK with 345x28mm slotted, zinc-coated discs and Trophy Sport Aerohat hats (rear), StopTech Street Performance pads, StopTech braided brake lines, calipers painted silver

    EXTERIOR M Performance front grille in black, M Performance carbon rear lip spoiler, BMW Blackline LCI taillights, 1M mirror conversion, Hartge dual outlet exhaust diffuser PU-RIM in gloss black, Carbon roundel decals, Philips Silver Vision indicator globes, T10 W5W Amber Chrome side indicator globes, Lux H8 V4 LED angel eyes, Final Inspection Rejuvenation Detail and Full Metal Jacket


    INTERIOR M Performance aluminium pedals, M Performance Alcantara steering wheel with yellow stripe, M Performance gear knob and Alcantara shift boot, M Performance handbrake handle and Alcantara boot, M Performance interior in carbon, M Performance illuminated door sills, Alcantara binnacle cover, JB4 Bluetooth module with Android integration, Precision LED E82 LED interior package, 35 per cent window tint

    THANKS Harold at HP Autosport, Andrew Brien and the crew at SouthernBM
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
No hashtag items to show here
Unable to load tooltip content.

Drive-My.COM MEDIA EN/UK based is United Kingdom’s top cars/retro/classic/modern/tuning/moto/commercial news, test drive, classic cars and classifieds. For car advertisement be it an RETRO/CLASSIC/OLD-TIMER/NEW-TIMER, Coupe, MPV, SUV, Luxury Car, Commercial vehicle, OPC car or even an auction car. We update you with latest information on new car prices from both parallel importers and car authorised dealers with brands such as Aston-Martin, Bristol, TVR, Bentley, Ford, Porsche, Jaguar, Land Rover, Citroen, Tesla, DS, Alfa Romeo, Subaru, Toyota, Acura, Honda, Nissan, Audi, Kia, Hyundai, Volkswagen, Volvo, Mitsubishi, BMW, Mercedes-Benz. Find new car pricelists, new car promotions, new car reviews, latest car news, car reviews & car insurance UK. We are also your information hub for parking, road tax, car insurance and car loan, car audio, car performance parts, car discussion, motor insurance, car grooming, car rental, vehicle insurance, car insurance quotation, car accessories, car workshop, & car sticker, tuning, stance and Cars Clubs

Our Drive-My EN/UK site use cookies