2019 Chevrolet Camaro HSV Hennessey Exorcist

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
 

Camaro Fever! Aussie tuners go gaga for HSV’s V8 invader. The 750kw Hennessey Exorcist will spearhead a V8 invasion of muscledup Chevrolet Camaros, as the nation’s starved GM fans prepare for the car’s imminent arrival.


MAIN The 750kW faintly mad Hennessey Exorcist headlines the aftermarket Camaro offerings coming to Australia.

LEFT/BELOW Imagine a rear wing and you’re looking at the car HSV is bringing to Australia – the stock Camaro 2 SS with the atmo 6.2-litre LT1 V8.


As the Ford Mustang – previously free to gallop the local sales plains uncontested – also prepares to face its US foe on Aussie soil, local GM tuners are stocking up on superchargers, exhausts and other go-fast hardware hot from the USA and in some cases, developed locally.

The nation’s leading GM tuners in Harrop, KPM Motorsport, Tunehouse, VCM Performance and Walkinshaw Performance are all preparing offerings for The General’s LT1-powered ponycar, also helping to soothe the angst of Australia not yet being able to get its hands on factory LT4-powered tyrefryers such as the supercharged 6.2-litre 485kW Camaro ZL1 and ZL1 1LE.

But it’s the Exorcist that will sit atop the V8 pecking order, at least initially, its 750kW supercharged LT4 V8 launching the rear-drive coupe down the quarter mile in an eye-watering 9.8 seconds, going on to a top speed of 350km/h – if you dare, that is.

The Exorcist is the Texan tuner’s cheeky answer to the Dodge Demon, Chrysler’s factory supercharged, 626kW HEMI V8 drag strip monster, capable itself of sub-10sec quarter miles.

The Exorcist will be offered by exclusive Hennessey distributor KPM Motorsport, based in South Australia, which also offers its Street Fighter brand of aftermarket enhancements. David Roscio of KPM Motorsport confirmed one lucky Aussie had already put their name down for an Exorcist despite what is likely to be a circa-$240,000 pricetag.

“Because the Exorcist is built on a factory supercharged ZL1 model as its base, it is a separate import process to the HSV Camaros,” said Roscio, explaining that an HSV-converted Camaro SS, with its LT1 powertrain, could not become an Exorcist – you would need to import a ZL1 with the LT4 V8. KPM Motorsport will sell the Exorcist with a 100,000km, three-year warranty, plus ADR approval.

Despite the Exorcist being a ZL1-only proposition, Hennessey will vie with other Australian tuners with upgrade packages for the LT1 engine found in the Camaro SS to be converted by HSV.

On top of its 370kW and 445kW naturally aspirated packs for the LT1 V8, KPM Motorsport will also offer Hennessey’s supercharging options for that engine, ranging from 480 to 750kW, meaning if you want Exorcist levels of power, you needn’t start with a ZL1. Hennessey claims its HPE1000 supercharged LT1 Camaro SS is capable of sub-10 second quarter miles, sub- 3.0sec to 100km/h and a top speed beyond 350km/h.

Roscio said as well as Hennessey upgrade packs – considered the more premium modification brand – KPM Motorsport would also offer a Street Fighter range of enhancements for the Camaro. “There will be three stages of naturally aspirated power packages, then two or three stages of supercharged upgrades, all ADR approved,” he said. Taking on Hennessey and Street Fighter with its own upgrade options, world-class Aussie aftermarket firm Harrop Engineering is developing superchargers for local Camaro owners for whom the SS’s 339kW/617Nm is not enough – but also gear that lets the LT1 breathe freer for those who love their V8s naturally aspirated.

Harrop’s four-lobe FDFI superchargers have offered bolt-on boost for a range of cars throughout the years, and the direct-injected LT1 in the sixth-gen Camaro will be no different. “From our point of view the Camaro is really a continuation of the Gen-F HSV and LS3 Holden platform,” Harrop General Manager Heath Moore told MOTOR. “We have supercharger development running now – in Australia and America – around the LT engines and we are focusing on the FDFI 2650 unit. This is the biggest blower core Eaton makes and is found on the 563kW LT5 engine in the 320km/h ZR1 Corvette.

“We’ll be able to turn the FDFI 2650 at a milder RPM to suit a stock or mildly modified LT1 engine, but the owner will be able to turn that up later if they do more engine work. We’ll also have naturally aspirated performance packages and exhaust packages.”

Moore said Harrop will also offer products beyond engine upgrades. “We will likely look into an Ultimatelevel brake kit and we’ll also likely have a TruTrac limited-slip option for the differential,” he said. “Our partners at Forgeline Wheels have huge experience working in this field, and we have styling providers we work with who can potentially offer aesthetic upgrades.”

Back at Clayton in Melbourne’s south-east, for those keen to keep their modified Camaro in the Walkinshaw family, the best prospect for appearance and performance upgrades is HSV’s aftermarket partner Walkinshaw Performance. Although there is no official comment because of the delicate Intellectual Property arrangement with GM and Holden, it is understood WP will offer performance and appearance enhancements shortly after launch.

In the US, Chevrolet competes in the aftermarket with its own licensed Performance range of Camaro SS upgrade gear. Chevrolet even markets a Drag Race Development Program selling parts that boost the LT1 SS’s quarter mile potential to a claimed 10.5sec at 205km/h, with validation requiring more than 400 passes at 600-plus horsepower. Parts include cold air intakes to headers, high-stall torque converters, heavy duty half-shafts; to Brembo brake kits, several full suspension upgrade packages and factory spec louder exhaust systems. We can only pray this is the gear on Walkinshaw’s radar for Australia.

Elsewhere in Melbourne, VCM Performance will compete for Camaro business with its HP Tuner software upgrades and Magnuson superchargers. “We have a supercharger kit in stock and ready to go,” said VCM’s Mario Pancione. “It is a Magnuson 2300-sized four-lobe kit set-up to bolt onto the LT1, and should be on the market for around the same price as the Heartbeat kits we sell for Commodores. We are actually waiting on our own Camaro to be delivered so we can build a demo car.”

Suiting those perhaps stepping out of a Clubsport R8 LSA, the Magnuson 2300 will supercharge the LT1 Camaro SS to beyond 400kW with 6psi of boost. Pancione said as Australian distributor of software tuning brand HP Tuners, VCM is busy working on related upgrades for the HSV-converted Camaro. As with any tuner, VCM must ‘crack the code’ of not only the direct injection fuel system, but the eight-speed auto transmissions. VCM had been spied fiddling with a ZB Commodore for reasons previously mysterious, but now clearer: “The transmission control unit (TCU) in both the new ZB Commodore and the Camaro needs to be unlocked,” explained Pancione. “The ZB Commodore uses the exact same TCU as the Camaro right down to the part number, so we have unlocked that in preparation for tuning Camaros.”

VCM is well known in the LS tuning world for developing new cam grinds that unlock huge power in the Chevy small-block engines, including reverse-pattern cams that suit forced-induction combos. However, with only a limited number of Camaros coming, cam junkies should not expect to see a huge range of cams to suit Gen V engines pop up overnight. “We will look at developing cam grinds in time,” said Pancione. “We will see what the market response to the Camaro is first.”

Sydney-siders needn’t fret for a lack of local tuning providers with Tunehouse in Marrickville jumping into the fight. “People are talking about these cars and we will work with various companies to develop packages under the THR brand,” said head honcho Jim Ghelis.

“This means suspension and brake upgrades, and leaving engine upgrades to bolt-on parts to avoid opening them up. We have a lot of options for R&D cars and we will get in and get them done, but we are going to run our own journey, like we always do, and develop our own packages.”

Queensland’s GM horsepower addicts Hi-Torque Performance couldn’t comment on its Camaro plans. While power upgrades such as superchargers and software tuning are obviously high on the agenda for Camaro owners and tuners alike, expect to see a tsunami of aftermarket wheel options in Camaro-friendly fitments from ubiquitous brands such as ROH. Suspension lowering options and upgrades are expected from brands such as Eibach and, more locally, Whiteline. For those who just want a little more herbs and perhaps sound without overdoing it, K&N Air Filters will offer an OE-quality cold-air intake.

What’s plain to see is if you have an HSV Clubsport R8 LSA, or GTS, and the lease is almost up, it will be far from difficult to replace it with a right-hook Camaro converted to OE standards by HSV, with a lazy supercharger bumping power to safe or psychotic levels – or even a snarling, enhanced naturally aspirated V8 sweetheart. Enough to scare the horses, whichever route you take.

ABOVE With bolt-on mods galore, the new Camaro will be tyre-frying fun.

ABOVE HSV will switch to facelifted Camaro SS later next year. Will likely come with new 10-speed auto co-developed with Ford.

BELOW ZL1 1LE? Not as much a long shot for Oz as you might first think.

TOP LEFT The naturally aspirated SS will offer up 339kW, but supercharger kits are already available and are promising in excess of 485kW as a ‘base’ figure.

ABOVE LEFT HSV is importing fully loaded V8 Camaros, with sunroof, leather, heated electric seats... it goes on.

THE EXORCIST’S SUPERCHARGED 750kWV8 LAUNCHES IT DOWN THE QUARTER MILE IN 9.8 SECONDS


LT1, LT4, LT5: KNOW YOUR MODERN GM V8s

THE SIXTH-generation Camaro sees the new Gen V LT small-block V8 slotted between the rails, boasting significant technical upgrades like direct injection and variable-rate oil pumps over the old LS-series engines we’ve had in Holdens since 1999.

The engine’s basic architecture carries over from the Gen IV LS3 with aluminium block and cylinder heads, 90-degree vee, 103.25mm bore and 92mm stroke, and a displacement of 6.2 litres. However, there are less than a handful of parts which interchange between the LS motors and the new LT1 and LT4 used in the sixth-generation Camaro.

While the LT1 runs a 11.5:1 compression ratio for snappy performance on various grades of fuel, the 485kW LT4 drops to 10:1 to deal with increased cylinder pressures from the new 1.7-litre Eaton four-lobe supercharger (made more compact to improve bonnet clearance). The LT4 also uses forged internals and an upgraded valvetrain to handle the huge 650hp, including a dry sump oil system and variable-rate oil pump.

There is also the 563kW LT5 V8 on duty in the new ZR1 Corvette, boasting a massive 2.65-litre supercharger. However, this is unlikely to appear in Camaro in the next 12 months.


YOUR HSV CAMARO SS QUESTIONS ANSWERED

Pricing, timing, spec, manual ’box

WHAT CAR ARE WE GETTING?

The Chevrolet Camaro 2SS. Only one version will be offered in MY2018 spec with an eight-speed paddle-shift auto (no manual initially). Think 6.2-litre V8 with 339kW/617Nm. There’ll be a limited-slip diff, Brembo brakes, bi-modal exhaust, sunroof, full leather, heated seats, 20-inch rims, rear spoiler and Bose nine-speaker premium audio, all standard.

WHEN & HOW MUCH?

HSV’S converted Camaro SS is due in showrooms end of September, priced at $85,990 (plus on-roads). Production at HSV’s new factory at Clayton in Melbourne’s south-east began early September – just “a little late”, HSV managing director Tim Jackson told MOTOR. The slight delay was because “it just takes time to do it properly”.

The Camaro will be sold nationally through 60 Holden dealers in re-branded Chevrolet areas – along with the similarly converted Silverado pick-up trucks. That’s more than the previous HSV network due to the addition of rural dealerships.

HOW MANY CAMAROS ARE ACTUALLY COMING TO OZ?

The first model year will be limited to just 550 units. This will be augmented by further shipments already on the water from the USA. HSV is looking at selling around 1000 a year, although production capacity will rise to more than 2000 if demand warrants. Annual sales will never approach the Mustang’s 9000-plus, a car imported as a factory made right-hand drive, avoiding the extra cost of local right-hand drive conversion.

ARE WE GETTING THE FACELIFTED ONE?

Yes (pictured, opposite). Right hand drive conversions of the latest 10-speed auto model – and possibly a manual option – won’t be available until “well into 2019”, according to HSV.

ARE WE GOING TO GET ZL1 AND/OR ZL1 1LE?

ZL1 is to Camaro SS what HSV GTS was to Commodore SS – the supercharged big daddy. The ZL1 has a supercharged 6.2-litre V8 packing 485kW and 868Nm. The 1LE pack optimises the ZL1 for track duty complete with monster brakes and wild aero. “We’ll look at them in the future,” Jackson teased. They’d cost well beyond $100,000.

WHAT DOES HOLDEN THINK ABOUT ALL THIS?

HSV’s conversion program has been endorsed by global GM product chief Mark Reuss, the former Holden boss who visited Australia recently. Reuss was shown the RHD Camaro and Silverado at a look-and-drive event at the Lang Lang proving ground, reportedly declaring he was happy with the result and supportive of HSV’s Chevrolet niche. While the next-gen mid-engined C8 Corvette is destined to be made in right-hand drive and imported by Holden in 2021, right-hand drive production of the new Camaro due around the same time has not been confirmed. In fact, despite the success of the RHD Mustang, GM insiders report that a business case for a factory RHD Camaros cannot be made.

WILL THERE BE A CAMARO SUPERCAR RACER?

The Walkinshaw Andretti United (WAU) team – closely aligned with Walkinshaw family owned HSV – is doing an engineering study to determine viability of a Camaro Supercar. Although the latest Gen2 rules allow two-door coupe body shapes, adapting them to fit the control Supercars chassis is difficult. Most problematic is the low roofline, which Ford has overcome by raising, stretching and widening the Mustang shape (a Mustang-bodied Supercars racer will replace the Falcon next year).

A similar solution has been found for the even lower-line Camaro and WAU is keen to switch from the ZB Commodore in 2020. It is looking at a technical alliance with Kelly Racing – about to lose its Nissan factory backing – and giantkilling independent Erebus Motorsport to justify the change.

Formerly the factory-backed Holden Racing Team, WAU has to tread carefully because of HSV’s links to Holden. Although Holden’s new management is supportive of racing again and has gone on record as not opposing the Camaro joining as a Commodore rival, the internal politics of such a change are a minefield. – Mark Fogarty


Comments (0)

There are no comments posted here yet

Our Drive-My EN/UK site use cookies